Do not use "/**" to begin a non-kernel-doc comment.
Fixes these build warnings:
drivers/phy/ti/phy-am654-serdes.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* PCIe SERDES driver for AM654x SoC
drivers/phy/ti/phy-j721e-wiz.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Wrapper driver for SERDES used in J721E
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: linux-phy@lists.infradead.org
Link: https://lore.kernel.org/r/20211115030559.13994-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since commit 88d26136a2 ("PM: Prevent runtime suspend during system
resume"), PM runtime will not let devices idle during system suspend.
This is because of the pm_runtime_get_noresume() call done in
device_prepare() that is not released until at device_complete() after
resume.
We must now disable the USB PHY in suspend if no USB cable is connected.
Cc: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210727104512.52968-1-tony@atomide.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Vinod writes:
phy-for-5.14 version 2
- Updates:
- Yaml conversion for renesas,rcar-gen3 pcie phy and
rockchip-usb-phy bindings
- Support for devm_phy_get() taking NULL phy name
- New support:
- PCIe phy for Qualcomm IPQ60xx
- PCIe phy for Qualcomm SDX55
- USB phy for RK3308
- CAN transceivers phy for TI TCAN104x
- Innosilicon-based CSI dphy for rockchip
* tag 'phy-for-5.14_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (36 commits)
phy: Revert "phy: ralink: Kconfig: convert mt7621-pci-phy into 'bool'"
phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe()
phy: uniphier-pcie: Fix updating phy parameters
phy/rockchip: add Innosilicon-based CSI dphy
dt-bindings: phy: add yaml binding for rockchip-inno-csi-dphy
phy: rockchip: remove redundant initialization of pointer cfg
phy: phy-can-transceiver: Add support for generic CAN transceiver driver
dt-bindings: phy: Add binding for TI TCAN104x CAN transceivers
phy: core: Reword the comment specifying the units of max_link_rate to be Mbps
phy: phy-mtk-hdmi: Remove redundant dev_err call in mtk_hdmi_phy_probe()
phy: phy-mtk-mipi-dsi: Remove redundant dev_err call in mtk_mipi_tx_probe()
phy: phy-mmp3-hsic: Remove redundant dev_err call in mmp3_hsic_phy_probe()
phy: bcm-ns-usb3: Remove redundant dev_err call in bcm_ns_usb3_mdio_probe()
MAINTAINERS: update marvell,armada-3700-utmi-phy.yaml reference
phy: phy-twl4030-usb: use DEVICE_ATTR_RO macro
dt-bindings: phy: convert rockchip-usb-phy.txt to YAML
phy: phy-rockchip-inno-usb2: add support for RK3308 USB phy
dt-bindings: phy: rockchip-inno-usb2: add compatible for rk3308 USB phy
phy: stm32: manage optional vbus regulator on phy_power_on/off
dt-bindings: phy: add vbus-supply optional property to phy-stm32-usbphyc
...
When compiling with CONFIG_PHY_J721E_WIZ, Hulk Robot reported:
drivers/phy/ti/phy-j721e-wiz.c: In function ‘wiz_mux_clk_register’:
drivers/phy/ti/phy-j721e-wiz.c:659:17: error: implicit declaration of function ‘kzalloc’; did you mean ‘vzalloc’? [-Werror=implicit-function-declaration]
659 | parent_names = kzalloc((sizeof(char *) * num_parents), GFP_KERNEL);
| ^~~~~~~
| vzalloc
drivers/phy/ti/phy-j721e-wiz.c:659:15: warning: assignment to ‘const char **’ from ‘int’ makes pointer from integer without a cast [-Wint-conversion]
659 | parent_names = kzalloc((sizeof(char *) * num_parents), GFP_KERNEL);
| ^
drivers/phy/ti/phy-j721e-wiz.c:697:2: error: implicit declaration of function ‘kfree’; did you mean ‘vfree’? [-Werror=implicit-function-declaration]
697 | kfree(parent_names);
| ^~~~~
| vfre
Fixes: 040cbe7687 ("phy: ti: j721e-wiz: Model the internal clocks without device tree input")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20210408012829.432938-1-liushixin2@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver's remove path calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This means
that the callback function may still be running after the driver's
remove function has finished, which would result in a use-after-free.
Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210407092716.3270248-1-yangyingliang@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Configure 'p_standard_mode' only for DP/QSGMII as for other modes
it's not used as per the programming sequence. Add "continue" in the
else to prevent random value from being written to p_standard_mode.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210331131417.15596-1-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Serdes lanes might be shared between multiple cores in some usecases
and its not possible to lock PLLs for both the lanes independently
by the two cores. This requires a bootloader to configure both the
lanes at early boot time.
To handle this case, skip all configuration if any of the lanes has
already been enabled.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210330110138.24356-2-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
"serdes" node (child node of WIZ) can have sub-nodes for representing links
or it can have sub-nodes for representing the various clocks within the
serdes. Instead of trying to read "reg" from every child node used for
assigning "lane_phy_type", read only if the child node's name is "phy"
or "link" subnode.
Ideally all PHY dt nodes should have node name as "phy", however
existing devicetree used "link" as subnode. So in order to maintain old
DT compatibility get PHY properties for "phy" or "link" subnode.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210319124128.13308-5-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Invoke wiz_init() before configuring anything else in Sierra/Torrent
(invoked as part of of_platform_device_create()). wiz_init() resets the
SERDES device and any configuration done in the probe() of
Sierra/Torrent will be lost. In order to prevent SERDES configuration
from getting reset, invoke wiz_init() immediately before invoking
of_platform_device_create().
Fixes: 091876cc35 ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com>
Cc: <stable@vger.kernel.org> # v5.10
Link: https://lore.kernel.org/r/20210319124128.13308-3-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
cmn_refclk_<p/m> lines in Torrent SERDES is used for connecting external
reference clock. cmn_refclk_<p/m> can also be configured to output the
reference clock. In order to drive the refclk out from the SERDES
(Cadence Torrent), PHY_EN_REFCLK should be set in SERDES_RST of WIZ.
Model PHY_EN_REFCLK as a clock, so that platforms like AM642 EVM can
enable it.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210310120840.16447-6-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
commit 091876cc35 ("phy: ti: j721e-wiz: Add support for WIZ module
present in TI J721E SoC") modeled the internal clocks depending on the
subnodes that are populated in device tree. However recent discussions
in the mailing list [1] suggested to just add #clock cells in the parent
DT node and model the clocks within the driver.
Model the mux clocks without device tree input for AM64x SoC. Don't
remove the earlier design since DT nodes for J7200 and J721e are already
upstreamed.
[1] -> http://lore.kernel.org/r/20210108025943.GA1790601@robh.at.kernel.org
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210310120840.16447-5-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
commit 091876cc35 ("phy: ti: j721e-wiz: Add support for WIZ module
present in TI J721E SoC") modeled both MUX clocks and DIVIDER clocks in
wiz. However during cleanup, it removed only the MUX clock provider.
Remove the DIVIDER clock provider here.
Fixes: 091876cc35 ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210310120840.16447-3-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Both "struct wiz_clk_div_sel" and "struct wiz_clk_mux_sel" are static
data that is common for all wiz instances. Including
"struct regmap_field" for each of the wiz instances can yield undesirable
results. Move "struct regmap_field" out of "struct wiz_clk_div_sel" and
"struct wiz_clk_mux_sel" and make them point to constant data.
So far no issues are observed since both these structures are not
accessed outside the probe.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210310120840.16447-2-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Start by reading the content of the VENDOR_SPECIFIC2 register and update
each bit field based on device properties when defined.
The use of bit masks prevents fields from overriding each other and
enables users to clear bits which are set by default, like datapolarity
in this instance.
Signed-off-by: Liam Beguin <lvb@xiphos.com>
Link: https://lore.kernel.org/r/20201211191241.21306-1-liambeguin@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
