mirror of
https://github.com/ukui/kernel.git
synced 2026-03-09 10:07:04 -07:00
cd845791125059d94de5b2e8921039bf21ea46f7
16849 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
a9dce6679d |
Merge tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd system call from Christian Brauner:
"This introduces the ability to use file descriptors from /proc/<pid>/
as stable handles on struct pid. Even if a pid is recycled the handle
will not change. For a start these fds can be used to send signals to
the processes they refer to.
With the ability to use /proc/<pid> fds as stable handles on struct
pid we can fix a long-standing issue where after a process has exited
its pid can be reused by another process. If a caller sends a signal
to a reused pid it will end up signaling the wrong process.
With this patchset we enable a variety of use cases. One obvious
example is that we can now safely delegate an important part of
process management - sending signals - to processes other than the
parent of a given process by sending file descriptors around via scm
rights and not fearing that the given process will have been recycled
in the meantime. It also allows for easy testing whether a given
process is still alive or not by sending signal 0 to a pidfd which is
quite handy.
There has been some interest in this feature e.g. from systems
management (systemd, glibc) and container managers. I have requested
and gotten comments from glibc to make sure that this syscall is
suitable for their needs as well. In the future I expect it to take on
most other pid-based signal syscalls. But such features are left for
the future once they are needed.
This has been sitting in linux-next for quite a while and has not
caused any issues. It comes with selftests which verify basic
functionality and also test that a recycled pid cannot be signaled via
a pidfd.
Jon has written about a prior version of this patchset. It should
cover the basic functionality since not a lot has changed since then:
https://lwn.net/Articles/773459/
The commit message for the syscall itself is extensively documenting
the syscall, including it's functionality and extensibility"
* tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests: add tests for pidfd_send_signal()
signal: add pidfd_send_signal() syscall
|
||
|
Linus Torvalds
|
f67e3fb489 |
Merge tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull device-dax updates from Dan Williams:
"New device-dax infrastructure to allow persistent memory and other
"reserved" / performance differentiated memories, to be assigned to
the core-mm as "System RAM".
Some users want to use persistent memory as additional volatile
memory. They are willing to cope with potential performance
differences, for example between DRAM and 3D Xpoint, and want to use
typical Linux memory management apis rather than a userspace memory
allocator layered over an mmap() of a dax file. The administration
model is to decide how much Persistent Memory (pmem) to use as System
RAM, create a device-dax-mode namespace of that size, and then assign
it to the core-mm. The rationale for device-dax is that it is a
generic memory-mapping driver that can be layered over any "special
purpose" memory, not just pmem. On subsequent boots udev rules can be
used to restore the memory assignment.
One implication of using pmem as RAM is that mlock() no longer keeps
data off persistent media. For this reason it is recommended to enable
NVDIMM Security (previously merged for 5.0) to encrypt pmem contents
at rest. We considered making this recommendation an actively enforced
requirement, but in the end decided to leave it as a distribution /
administrator policy to allow for emulation and test environments that
lack security capable NVDIMMs.
Summary:
- Replace the /sys/class/dax device model with /sys/bus/dax, and
include a compat driver so distributions can opt-in to the new ABI.
- Allow for an alternative driver for the device-dax address-range
- Introduce the 'kmem' driver to hotplug / assign a device-dax
address-range to the core-mm.
- Arrange for the device-dax target-node to be onlined so that the
newly added memory range can be uniquely referenced by numa apis"
NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because
we currently have special - and very annoying rules in the kernel about
accessing PMEM only with the "MC safe" accessors, because machine checks
inside the regular repeat string copy functions can be fatal in some
(not described) circumstances.
And apparently the PMEM modules can cause that a lot more than regular
RAM. The argument is that this happens because PMEM doesn't necessarily
get scrubbed at boot like RAM does, but that is planned to be added for
the user space tooling.
Quoting Dan from another email:
"The exposure can be reduced in the volatile-RAM case by scanning for
and clearing errors before it is onlined as RAM. The userspace tooling
for that can be in place before v5.1-final. There's also runtime
notifications of errors via acpi_nfit_uc_error_notify() from
background scrubbers on the DIMM devices. With that mechanism the
kernel could proactively clear newly discovered poison in the volatile
case, but that would be additional development more suitable for v5.2.
I understand the concern, and the need to highlight this issue by
tapping the brakes on feature development, but I don't see PMEM as RAM
making the situation worse when the exposure is also there via DAX in
the PMEM case. Volatile-RAM is arguably a safer use case since it's
possible to repair pages where the persistent case needs active
application coordination"
* tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: "Hotplug" persistent memory for use like normal RAM
mm/resource: Let walk_system_ram_range() search child resources
mm/memory-hotplug: Allow memory resources to be children
mm/resource: Move HMM pr_debug() deeper into resource code
mm/resource: Return real error codes from walk failures
device-dax: Add a 'modalias' attribute to DAX 'bus' devices
device-dax: Add a 'target_node' attribute
device-dax: Auto-bind device after successful new_id
acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node
device-dax: Add /sys/class/dax backwards compatibility
device-dax: Add support for a dax override driver
device-dax: Move resource pinning+mapping into the common driver
device-dax: Introduce bus + driver model
device-dax: Start defining a dax bus model
device-dax: Remove multi-resource infrastructure
device-dax: Kill dax_region base
device-dax: Kill dax_region ida
|
||
|
Linus Torvalds
|
636deed6c0 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- some cleanups
- direct physical timer assignment
- cache sanitization for 32-bit guests
s390:
- interrupt cleanup
- introduction of the Guest Information Block
- preparation for processor subfunctions in cpu models
PPC:
- bug fixes and improvements, especially related to machine checks
and protection keys
x86:
- many, many cleanups, including removing a bunch of MMU code for
unnecessary optimizations
- AVIC fixes
Generic:
- memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits)
kvm: vmx: fix formatting of a comment
KVM: doc: Document the life cycle of a VM and its resources
MAINTAINERS: Add KVM selftests to existing KVM entry
Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()"
KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char()
KVM: PPC: Fix compilation when KVM is not enabled
KVM: Minor cleanups for kvm_main.c
KVM: s390: add debug logging for cpu model subfunctions
KVM: s390: implement subfunction processor calls
arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2
KVM: arm/arm64: Remove unused timer variable
KVM: PPC: Book3S: Improve KVM reference counting
KVM: PPC: Book3S HV: Fix build failure without IOMMU support
Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()"
x86: kvmguest: use TSC clocksource if invariant TSC is exposed
KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start
KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter
KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns
KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes()
KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children
...
|
||
|
Linus Torvalds
|
f261c4e529 |
Merge branch 'akpm' (patches from Andrew)
Merge misc patches from Andrew Morton: - a little bit more MM - a few fixups [ The "little bit more MM" is actually just one of the three patches Andrew sent for mm/filemap.c, I'm still mulling over two more of them from Josef Bacik - Linus ] * emailed patches from Andrew Morton <akpm@linux-foundation.org>: include/linux/swap.h: use offsetof() instead of custom __swapoffset macro tools/testing/selftests/proc/proc-pid-vm.c: test with vsyscall in mind zram: default to lzo-rle instead of lzo filemap: pass vm_fault to the mmap ra helpers |
||
Alexey Dobriyan
|
17415606f9 |
tools/testing/selftests/proc/proc-pid-vm.c: test with vsyscall in mind
: selftests: proc: proc-pid-vm : ======================================== : proc-pid-vm: proc-pid-vm.c:277: main: Assertion `rv == strlen(buf0)' failed. : Aborted Because the vsyscall mapping is enabled. Read from vsyscall page to tell if vsyscall is being used. Link: http://lkml.kernel.org/r/20190307183204.GA11405@avx2 Link: http://lkml.kernel.org/r/20190219094722.GB28258@shao2-debian Fixes: 34aab6bec23e7e9 ("proc: test /proc/*/maps, smaps, smaps_rollup, statm") Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
9352ca585b |
Merge tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups on top of the previously merged
power management material for 5.1-rc1 with one cpupower utility update
that wasn't pushed earlier due to unfortunate timing.
Specifics:
- Fix registration of new cpuidle governors partially broken during
the 5.0 development cycle by mistake (Rafael Wysocki).
- Avoid integer overflows in the menu cpuidle governor by making it
discard the overflowing data points upfront (Rafael Wysocki).
- Fix minor mistake in the recent update of the iowait boost
computation in the intel_pstate driver (Rafael Wysocki).
- Drop incorrect __init annotation from one function in the pxa2xx
cpufreq driver (Arnd Bergmann).
- Fix the operating performance points (OPP) framework initialization
for devices in multiple power domains if only one of them is
scalable (Rajendra Nayak).
- Fix mistake in dev_pm_opp_set_rate() which causes it to skip
updating the performance state if the new frequency is the same as
the old one (Viresh Kumar).
- Rework the cancellation of wakeup source timers to avoid potential
issues with it and do some cleanups unlocked by that change (Viresh
Kumar, Rafael Wysocki).
- Clean up the code computing the active/suspended time of devices in
the PM-runtime framework after recent changes (Ulf Hansson).
- Make the power management infrastructure code use pr_fmt()
consistently (Joe Perches).
- Clean up the generic power domains (genpd) framework somewhat
(Aisheng Dong).
- Improve kerneldoc comments for two functions in the cpufreq core
(Rafael Wysocki).
- Fix typo in a PM QoS file description comment (Aisheng Dong).
- Update the handling of CPU boost frequencies in the cpupower
utility (Abhishek Goel)"
* tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: governor: Add new governors to cpuidle_governors again
cpufreq: intel_pstate: Fix up iowait_boost computation
PM / OPP: Update performance state when freq == old_freq
PM / wakeup: Drop wakeup_source_drop()
PM / wakeup: Rework wakeup source timer cancellation
PM / domains: Remove one unnecessary blank line
PM / Domains: Return early for all errors in _genpd_power_off()
PM / Domains: Improve warn for multiple states but no governor
OPP: Fix handling of multiple power domains
PM / QoS: Fix typo in file description
cpufreq: pxa2xx: remove incorrect __init annotation
PM-runtime: Call pm_runtime_active|suspended_time() from sysfs
PM-runtime: Consolidate code to get active/suspended time
PM: Add and use pr_fmt()
cpufreq: Improve kerneldoc comments for cpufreq_cpu_get/put()
cpuidle: menu: Avoid overflows when computing variance
tools/power/cpupower: Display boost frequency separately
|
||
Rafael J. Wysocki
|
b444e1aa3e |
Merge branches 'pm-opp' and 'pm-tools'
* pm-opp: PM / OPP: Update performance state when freq == old_freq OPP: Fix handling of multiple power domains * pm-tools: tools/power/cpupower: Display boost frequency separately |
||
|
Linus Torvalds
|
a667cb7a94 |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: - a few misc things - the rest of MM - remove flex_arrays, replace with new simple radix-tree implementation * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (38 commits) Drop flex_arrays sctp: convert to genradix proc: commit to genradix generic radix trees selinux: convert to kvmalloc md: convert to kvmalloc openvswitch: convert to kvmalloc of: fix kmemleak crash caused by imbalance in early memory reservation mm: memblock: update comments and kernel-doc memblock: split checks whether a region should be skipped to a helper function memblock: remove memblock_{set,clear}_region_flags memblock: drop memblock_alloc_*_nopanic() variants memblock: memblock_alloc_try_nid: don't panic treewide: add checks for the return value of memblock_alloc*() swiotlb: add checks for the return value of memblock_alloc*() init/main: add checks for the return value of memblock_alloc*() mm/percpu: add checks for the return value of memblock_alloc*() sparc: add checks for the return value of memblock_alloc*() ia64: add checks for the return value of memblock_alloc*() arch: don't memset(0) memory returned by memblock_alloc() ... |
||
Kent Overstreet
|
586187d7de |
Drop flex_arrays
All existing users have been converted to generic radix trees Link: http://lkml.kernel.org/r/20181217131929.11727-8-kent.overstreet@gmail.com Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@parisplace.org> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Pravin B Shelar <pshelar@ovn.org> Cc: Shaohua Li <shli@kernel.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Zev Weiss
|
fec5248668 |
tools/testing/selftests/sysctl/sysctl.sh: add tests for >32-bit values written to 32-bit integers
Patch series "sysctl: fix range-checking in do_proc_dointvec_minmax_conv()", v2. After being left with an unusable system after a typo executing something like 'echo $((1<<24)) > /proc/sys/vm/max_map_count', I found that do_proc_dointvec_minmax_conv() was missing a check to ensure that the converted value actually fits in an int. The first of the following patches enhances the sysctl selftest such that it detects this problem; the second provides a minimal fix (suitable for -stable) such that the selftest passes. The third patch then performs a more thorough refactoring to eliminate the code duplication that led to the bug in the first place (maintaining the passing status of the selftest). This patch (of 3): At present this exposes a bug in do_proc_dointvec_minmax_conv() (it fails to check for values that are too wide to fit in an int). Link: http://lkml.kernel.org/r/20190207123426.9202-2-zev@bewilderbeest.net Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Iurii Zaikin <yzaikin@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
6cdfa54cd2 |
Merge tag 'trace-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The biggest change for this release is in the histogram code:
- Add "onchange(var)" histogram handler that executes a action when
$var changes.
- Add new "snapshot()" action for histogram handlers, that causes a
snapshot of the ring buffer when triggered. ie.
onchange(var).snapshot() will trigger a snapshot if var changes.
- Add alternative for "trace()" action. Currently, to trigger a
synthetic event, the name of that event is used as the handler
name, which is inconsistent with the other actions.
onchange(var).synthetic(param) where it can now be
onchange(var).trace(synthetic, param). The older method will still
be allowed, as long as the synthetic events do not overlap with
other handler names.
- The histogram documentation at testcases were updated for the new
changes.
Outside of the histogram code, we have:
- Added a quicker way to enable set_ftrace_filter files, that will
make it much quicker to bisect tracing a function that shouldn't be
traced and crashes the kernel. (You can echo in numbers to
set_ftrace_filter, and it will select the corresponding function
that is in available_filter_functions).
- Some better displaying of the tracing data (and more information
was added).
The rest are small fixes and more clean ups to the code"
* tag 'trace-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (37 commits)
tracing: Use strncpy instead of memcpy when copying comm in trace.c
tracing: Use strncpy instead of memcpy when copying comm for hist triggers
tracing: Use strncpy instead of memcpy for string keys in hist triggers
tracing: Use str_has_prefix() in synth_event_create()
x86/ftrace: Fix warning and considate ftrace_jmp_replace() and ftrace_call_replace()
tracing/perf: Use strndup_user() instead of buggy open-coded version
doc: trace: Fix documentation for uprobe_profile
tracing: Fix spelling mistake: "analagous" -> "analogous"
tracing: Comment why cond_snapshot is checked outside of max_lock protection
tracing: Add hist trigger action 'expected fail' test case
tracing: Add alternative synthetic event trace action test case
tracing: Add hist trigger onchange() handler test case
tracing: Add hist trigger snapshot() action test case
tracing: Add SPDX license GPL-2.0 license identifier to inter-event testcases
tracing: Add alternative synthetic event trace action syntax
tracing: Add hist trigger onchange() handler Documentation
tracing: Add hist trigger onchange() handler
tracing: Add hist trigger snapshot() action Documentation
tracing: Add hist trigger snapshot() action
tracing: Add conditional snapshot
...
|
||
|
Linus Torvalds
|
6bc3fe8e7e |
tools: mark 'test_vmalloc.sh' executable
Several of these scripts have come in as old-fashioned patches, and in
the process lost the executable bit. In most cases it doesn't matter,
since the test infrastructure will explicitly execute them using the
proper shell interpreter, but at least in the case of the new vmalloc
test, the lack of execurable bit caused the test to fail with
./run_vmtests: line 217: ./test_vmalloc.sh: Permission denied
because of the lacking exectuable permissions bit.
This patch fixes that up.
NOTE! A simple script to look for non-executable scripts in the kernel,
something like
git ls-files --stage -- '*.sh' |
grep 100644 |
cut -f2 |
xargs grep -l '#!'
will show that there's a lot of other files that _look_ like executable
shell scripts, but don't have the executable bit set. I considered just
scripting them all to be executable, but since it looks like the common
pattern is to not really require it, I'm just doing the minimal fix as
pointed out by the kernel test robot.
Fixes:
|
||
|
Linus Torvalds
|
8f49a658b4 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"First batch of fixes in the new merge window:
1) Double dst_cache free in act_tunnel_key, from Wenxu.
2) Avoid NULL deref in IN_DEV_MFORWARD() by failing early in the
ip_route_input_rcu() path, from Paolo Abeni.
3) Fix appletalk compile regression, from Arnd Bergmann.
4) If SLAB objects reach the TCP sendpage method we are in serious
trouble, so put a debugging check there. From Vasily Averin.
5) Memory leak in hsr layer, from Mao Wenan.
6) Only test GSO type on GSO packets, from Willem de Bruijn.
7) Fix crash in xsk_diag_put_umem(), from Eric Dumazet.
8) Fix VNIC mailbox length in nfp, from Dirk van der Merwe.
9) Fix race in ipv4 route exception handling, from Xin Long.
10) Missing DMA memory barrier in hns3 driver, from Jian Shen.
11) Use after free in __tcf_chain_put(), from Vlad Buslov.
12) Handle inet_csk_reqsk_queue_add() failures, from Guillaume Nault.
13) Return value correction when ip_mc_may_pull() fails, from Eric
Dumazet.
14) Use after free in x25_device_event(), also from Eric"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits)
gro_cells: make sure device is up in gro_cells_receive()
vxlan: test dev->flags & IFF_UP before calling gro_cells_receive()
net/x25: fix use-after-free in x25_device_event()
isdn: mISDNinfineon: fix potential NULL pointer dereference
net: hns3: fix to stop multiple HNS reset due to the AER changes
ip: fix ip_mc_may_pull() return value
net: keep refcount warning in reqsk_free()
net: stmmac: Avoid one more sometimes uninitialized Clang warning
net: dsa: mv88e6xxx: Set correct interface mode for CPU/DSA ports
rxrpc: Fix client call queueing, waiting for channel
tcp: handle inet_csk_reqsk_queue_add() failures
net: ethernet: sun: Zero initialize class in default case in niu_add_ethtool_tcam_entry
8139too : Add support for U.S. Robotics USR997901A 10/100 Cardbus NIC
fou, fou6: avoid uninit-value in gue_err() and gue6_err()
net: sched: fix potential use-after-free in __tcf_chain_put()
vhost: silence an unused-variable warning
vsock/virtio: fix kernel panic from virtio_transport_reset_no_sock
connector: fix unsafe usage of ->real_parent
vxlan: do not need BH again in vxlan_cleanup()
net: hns3: add dma_rmb() for rx description
...
|
||
|
Linus Torvalds
|
5af7f11588 |
Merge branch 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull tpm updates from James Morris:
- Clean up the transmission flow
Cleaned up the whole transmission flow. Locking of the chip is now
done in the level of tpm_try_get_ops() and tpm_put_ops() instead
taking the chip lock inside tpm_transmit(). The nested calls inside
tpm_transmit(), used with the resource manager, have been refactored
out.
Should make easier to perform more complex transactions with the TPM
without making the subsystem a bigger mess (e.g. encrypted channel
patches by James Bottomley).
- PPI 1.3 support
TPM PPI 1.3 introduces an additional optional command parameter that
may be needed for some commands. Display the parameter if the command
requires such a parameter. Only command 23 (SetPCRBanks) needs one.
The PPI request file will show output like this then:
# echo "23 16" > request
# cat request
23 16
# echo "5" > request
# cat request
5
- Extend all PCR banks in IMA
Instead of static PCR banks array, the array of available PCR banks
is now allocated dynamically. The digests sizes are determined
dynamically using a probe PCR read without relying crypto's static
list of hash algorithms.
This should finally make sealing of measurements in IMA safe and
secure.
- TPM 2.0 selftests
Added a test suite to tools/testing/selftests/tpm2 previously outside
of the kernel tree: https://github.com/jsakkine-intel/tpm2-scripts
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (37 commits)
tpm/ppi: Enable submission of optional command parameter for PPI 1.3
tpm/ppi: Possibly show command parameter if TPM PPI 1.3 is used
tpm/ppi: Display up to 101 operations as define for version 1.3
tpm/ppi: rename TPM_PPI_REVISION_ID to TPM_PPI_REVISION_ID_1
tpm/ppi: pass function revision ID to tpm_eval_dsm()
tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()
KEYS: trusted: explicitly use tpm_chip structure from tpm_default_chip()
tpm: move tpm_chip definition to include/linux/tpm.h
tpm: retrieve digest size of unknown algorithms with PCR read
tpm: rename and export tpm2_digest and tpm2_algorithms
tpm: dynamically allocate the allocated_banks array
tpm: remove @flags from tpm_transmit()
tpm: take TPM chip power gating out of tpm_transmit()
tpm: introduce tpm_chip_start() and tpm_chip_stop()
tpm: remove TPM_TRANSMIT_UNLOCKED flag
tpm: use tpm_try_get_ops() in tpm-sysfs.c.
tpm: remove @space from tpm_transmit()
tpm: move TPM space code out of tpm_transmit()
tpm: move tpm_validate_commmand() to tpm2-space.c
tpm: clean up tpm_try_transmit() error handling flow
...
|
||
|
Linus Torvalds
|
12ad143e1b |
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Thomas Gleixner:
"Perf updates and fixes:
Kernel:
- Handle events which have the bpf_event attribute set as side band
events as they carry information about BPF programs.
- Add missing switch-case fall-through comments
Libraries:
- Fix leaks and double frees in error code paths.
- Prevent buffer overflows in libtraceevent
Tools:
- Improvements in handling Intel BT/PTS
- Add BTF ELF markers to perf trace BPF programs to improve output
- Support --time, --cpu, --pid and --tid filters for perf diff
- Calculate the column width in perf annotate as the hardcoded 6
characters for the instruction are not sufficient
- Small fixes all over the place"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
perf/core: Mark expected switch fall-through
perf/x86/intel/uncore: Fix client IMC events return huge result
perf/ring_buffer: Use high order allocations for AUX buffers optimistically
perf data: Force perf_data__open|close zero data->file.path
perf session: Fix double free in perf_data__close
perf evsel: Probe for precise_ip with simple attr
perf tools: Read and store caps/max_precise in perf_pmu
perf hist: Fix memory leak of srcline
perf hist: Add error path into hist_entry__init
perf c2c: Fix c2c report for empty numa node
perf script python: Add Python3 support to intel-pt-events.py
perf script python: Add Python3 support to event_analyzing_sample.py
perf script python: add Python3 support to check-perf-trace.py
perf script python: Add Python3 support to futex-contention.py
perf script python: Remove mixed indentation
perf diff: Support --pid/--tid filter options
perf diff: Support --cpu filter option
perf diff: Support --time filter option
perf thread: Generalize function to copy from thread addr space from intel-bts code
perf annotate: Calculate the max instruction name, align column to that
...
|
||
|
Linus Torvalds
|
96a6de1a54 |
Merge tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab: - remove sensor drivers that got converted from soc_camera - remaining soc_camera drivers got moved to staging - some documentation cleanups and improvements - the imx staging driver now supports imx7 - the ov9640, mt9m001 and mt9m111 got converted from soc_camera - the vim2m driver now does what a m2m convert driver expects to do - epoll() fixes on media subsystems - several drivers fixes, typos, cleanups and improvements * tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (346 commits) media: dvb/earth-pt1: fix wrong initialization for demod blocks media: vim2m: Address some coding style issues media: vim2m: don't use BUG() media: vim2m: speedup passthrough copy media: vim2m: add an horizontal scaler media: vim2m: don't accept YUYV anymore as output format media: vim2m: add vertical linear scaler media: vim2m: better handle cap/out buffers with different sizes media: vim2m: use different framesizes for bayer formats media: vim2m: add support for VIDIOC_ENUM_FRAMESIZES media: vim2m: ensure that width is multiple of two media: vim2m: improve debug messages media: vim2m: add bayer capture formats media: a few more typos at staging, pci, platform, radio and usb media: Documentation: fix several typos media: staging: fix several typos media: include: fix several typos media: common: fix several typos media: v4l2-core: fix several typos media: usb: fix several typos ... |
||
|
Linus Torvalds
|
1a29e85750 |
Merge tag 'docs-5.1' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet: "A fairly routine cycle for docs - lots of typo fixes, some new documents, and more translations. There's also some LICENSES adjustments from Thomas" * tag 'docs-5.1' of git://git.lwn.net/linux: (74 commits) docs: Bring some order to filesystem documentation Documentation/locking/lockdep: Drop last two chars of sample states doc: rcu: Suspicious RCU usage is a warning docs: driver-api: iio: fix errors in documentation Documentation/process/howto: Update for 4.x -> 5.x versioning docs: Explicitly state that the 'Fixes:' tag shouldn't split lines doc: security: Add kern-doc for lsm_hooks.h doc: sctp: Merge and clean up rst files Docs: Correct /proc/stat path scripts/spdxcheck.py: fix C++ comment style detection doc: fix typos in license-rules.rst Documentation: fix admin-guide/README.rst minimum gcc version requirement doc: process: complete removal of info about -git patches doc: translations: sync translations 'remove info about -git patches' perf-security: wrap paragraphs on 72 columns perf-security: elaborate on perf_events/Perf privileged users perf-security: document collected perf_events/Perf data categories perf-security: document perf_events/Perf resource control sysfs.txt: add note on available attribute macros docs: kernel-doc: typo "if ... if" -> "if ... is" ... |
||
|
Linus Torvalds
|
a448c643bc |
Merge tag 'linux-kselftest-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update fromShuah Khan: - ir test compile warnings fixes - seccomp test fixes and improvements from Tycho Andersen and Kees Cook - ftrace fixes to non-POSIX-compliant constructs in colored output code and handling absence of tput from Juerg Haefliger * tag 'linux-kselftest-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: Handle the absence of tput selftests/ftrace: Replace \e with \033 selftests/ftrace: Replace echo -e with printf selftests: ir: skip when non-root user runs the test selftests: ir: skip when lirc device doesn't exist. selftests: ir: fix warning: "%s" directive output may be truncated ’ directive output may be truncated selftests/seccomp: Actually sleep for 1/10th second selftests/harness: Update named initializer syntax selftests: unshare userns in seccomp pidns testcases selftests: set NO_NEW_PRIVS bit in seccomp user tests selftests: skip seccomp get_metadata test if not real root selftest: include stdio.h in kselftest.h selftests: fix typo in seccomp_bpf.c selftests: don't kill child immediately in get_metadata() test |
||
Ingo Molnar
|
b339da4803 |
Merge tag 'perf-core-for-mingo-5.1-20190307' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core changes from Arnaldo Carvalho de Melo:
perf bpf:
Arnaldo Carvalho de Melo:
- Automatically add BTF ELF markers to 'perf trace' BPF programs, so that
tools such as 'bpftool map dump' can pretty print map keys and values.
perf c2c:
Jiri Olsa:
- Fix report for empty NUMA node.
perf diff:
Jin Yao:
- Support --time, --cpu, --pid and --tid filter options.
perf probe:
Arnaldo Carvalho de Melo:
- Clarify error message about not finding kernel modules debuginfo.
perf record:
Jiri Olsa:
- Fixup probing for max attr.precise_ip.
perf trace:
Arnaldo Carvalho de Melo:
- Add missing %s lost in the 'msg_flags' recvmmsg arg when adding prefix suppression logic.
perf annotate:
Arnaldo Carvalho de Melo:
- Calculate the max instruction name, align column to that, removing the
hardcoded max 6 chars and cope with instructions with names longer than that,
such as vpmovmskb, vpcmpeqb, etc.
kernel:
Song Liu:
- Consider events with attr.bpf_event set as side-band.
Gustavo A. R. Silva:
- Mark expected switch fall-through in perf_event_parse_addr_filter().
Libraries:
Jiri Olsa:
- Fix leaks and double frees on error paths.
libtraceevent:
Tony Jones:
- Fix buffer overflow in arg_eval().
python scripting:
Tony Jones:
- More python3 fixes.
Trivial:
Yang Wei:
- Remove needless extra semicolon in clang C++ glue code.
Intel PT/BTS:
Adrian Hunter:
- Improve auxtrace address filter error message when there is no DSO.
- Fix divide by zero when TSC is not available.
- Further improvements to the export to sqlite/posgresql python scripts
and to the GUI sqlviewer, exporting 'parent_id' so that we have enable
the creation of call trees.
Andi Kleen:
- Generalize function to copy from thread addr space from intel-bts code.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
|
Linus Torvalds
|
38e7571c07 |
Merge tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-block
Pull io_uring IO interface from Jens Axboe:
"Second attempt at adding the io_uring interface.
Since the first one, we've added basic unit testing of the three
system calls, that resides in liburing like the other unit tests that
we have so far. It'll take a while to get full coverage of it, but
we're working towards it. I've also added two basic test programs to
tools/io_uring. One uses the raw interface and has support for all the
various features that io_uring supports outside of standard IO, like
fixed files, fixed IO buffers, and polled IO. The other uses the
liburing API, and is a simplified version of cp(1).
This adds support for a new IO interface, io_uring.
io_uring allows an application to communicate with the kernel through
two rings, the submission queue (SQ) and completion queue (CQ) ring.
This allows for very efficient handling of IOs, see the v5 posting for
some basic numbers:
https://lore.kernel.org/linux-block/20190116175003.17880-1-axboe@kernel.dk/
Outside of just efficiency, the interface is also flexible and
extendable, and allows for future use cases like the upcoming NVMe
key-value store API, networked IO, and so on. It also supports async
buffered IO, something that we've always failed to support in the
kernel.
Outside of basic IO features, it supports async polled IO as well.
This particular feature has already been tested at Facebook months ago
for flash storage boxes, with 25-33% improvements. It makes polled IO
actually useful for real world use cases, where even basic flash sees
a nice win in terms of efficiency, latency, and performance. These
boxes were IOPS bound before, now they are not.
This series adds three new system calls. One for setting up an
io_uring instance (io_uring_setup(2)), one for submitting/completing
IO (io_uring_enter(2)), and one for aux functions like registrating
file sets, buffers, etc (io_uring_register(2)). Through the help of
Arnd, I've coordinated the syscall numbers so merge on that front
should be painless.
Jon did a writeup of the interface a while back, which (except for
minor details that have been tweaked) is still accurate. Find that
here:
https://lwn.net/Articles/776703/
Huge thanks to Al Viro for helping getting the reference cycle code
correct, and to Jann Horn for his extensive reviews focused on both
security and bugs in general.
There's a userspace library that provides basic functionality for
applications that don't need or want to care about how to fiddle with
the rings directly. It has helpers to allow applications to easily set
up an io_uring instance, and submit/complete IO through it without
knowing about the intricacies of the rings. It also includes man pages
(thanks to Jeff Moyer), and will continue to grow support helper
functions and features as time progresses. Find it here:
git://git.kernel.dk/liburing
Fio has full support for the raw interface, both in the form of an IO
engine (io_uring), but also with a small test application (t/io_uring)
that can exercise and benchmark the interface"
* tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-block:
io_uring: add a few test tools
io_uring: allow workqueue item to handle multiple buffered requests
io_uring: add support for IORING_OP_POLL
io_uring: add io_kiocb ref count
io_uring: add submission polling
io_uring: add file set registration
net: split out functions related to registering inflight socket files
io_uring: add support for pre-mapped user IO buffers
block: implement bio helper to add iter bvec pages to bio
io_uring: batch io_kiocb allocation
io_uring: use fget/fput_many() for file references
fs: add fget_many() and fput_many()
io_uring: support for IO polling
io_uring: add fsync support
Add io_uring IO interface
|
||
Nikita V. Shirokov
|
243b4cdab9 |
bpf, libbpf: fixing leak when kernel does not support btf
We could end up in situation when we have object file w/ all btf
info, but kernel does not support btf yet. In this situation
currently libbpf just set obj->btf to NULL w/o freeing it first.
This patch is fixing it by making sure to run btf__free first.
Fixes:
|
||
|
Linus Torvalds
|
b7af27bf94 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Jiri Kosina: - support for something we call 'atomic replace', and allows for much better handling of cumulative patches (which is something very useful for distros), from Jason Baron with help of Petr Mladek and Joe Lawrence - improvement of handling of tasks blocking finalization, from Miroslav Benes - update of MAINTAINERS file to reflect move towards group maintainership * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: (22 commits) livepatch/selftests: use "$@" to preserve argument list livepatch: Module coming and going callbacks can proceed with all listed patches livepatch: Proper error handling in the shadow variables selftest livepatch: return -ENOMEM on ptr_id() allocation failure livepatch: Introduce klp_for_each_patch macro livepatch: core: Return EOPNOTSUPP instead of ENOSYS selftests/livepatch: add DYNAMIC_DEBUG config dependency livepatch: samples: non static warnings fix livepatch: update MAINTAINERS livepatch: Remove signal sysfs attribute livepatch: Send a fake signal periodically selftests/livepatch: introduce tests livepatch: Remove ordering (stacking) of the livepatches livepatch: Atomic replace and cumulative patches documentation livepatch: Remove Nop structures when unused livepatch: Add atomic replace livepatch: Use lists to manage patches, objects and functions livepatch: Simplify API by removing registration step livepatch: Don't block the removal of patches loaded after a forced transition livepatch: Consolidate klp_free functions ... |
||
|
Linus Torvalds
|
6c3ac11343 |
Merge tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Enable THREAD_INFO_IN_TASK to move thread_info off the stack.
- A big series from Christoph reworking our DMA code to use more of
the generic infrastructure, as he said:
"This series switches the powerpc port to use the generic swiotlb
and noncoherent dma ops, and to use more generic code for the
coherent direct mapping, as well as removing a lot of dead
code."
- Increase our vmalloc space to 512T with the Hash MMU on modern
CPUs, allowing us to support machines with larger amounts of total
RAM or distance between nodes.
- Two series from Christophe, one to optimise TLB miss handlers on
6xx, and another to optimise the way STRICT_KERNEL_RWX is
implemented on some 32-bit CPUs.
- Support for KCOV coverage instrumentation which means we can run
syzkaller and discover even more bugs in our code.
And as always many clean-ups, reworks and minor fixes etc.
Thanks to: Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea
Arcangeli, Andrew Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir
Singh, Brajeswar Ghosh, Breno Leitao, Christian Lamparter, Christian
Zigotzky, Christophe Leroy, Christoph Hellwig, Corentin Labbe, Daniel
Axtens, David Gibson, Diana Craciun, Firoz Khan, Gustavo A. R. Silva,
Igor Stoppa, Joe Lawrence, Joel Stanley, Jonathan Neuschäfer, Jordan
Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark
Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce, Meelis
Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot,
Nicholas Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran,
Paul Mackerras, Peter Xu, PrasannaKumar Muralidharan, Qian Cai,
Rashmica Gupta, Reza Arbab, Robert P. J. Day, Russell Currey,
Sabyasachi Gupta, Sam Bobroff, Sandipan Das, Sergey Senozhatsky,
Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav Jain,
YueHaibing"
* tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/32: Clear on-stack exception marker upon exception return
powerpc: Remove export of save_stack_trace_tsk_reliable()
powerpc/mm: fix "section_base" set but not used
powerpc/mm: Fix "sz" set but not used warning
powerpc/mm: Check secondary hash page table
powerpc: remove nargs from __SYSCALL
powerpc/64s: Fix unrelocated interrupt trampoline address test
powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables
powerpc/fsl: Fix the flush of branch predictor.
powerpc/powernv: Make opal log only readable by root
powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc
powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C
powerpc/64s: Fix data interrupts vs d-side MCE reentrancy
powerpc/64s: Prepare to handle data interrupts vs d-side MCE reentrancy
powerpc/64s: system reset interrupt preserve HSRRs
powerpc/64s: Fix HV NMI vs HV interrupt recoverability test
powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search
powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback
selftests/powerpc: Remove duplicate header
powerpc sstep: Add support for modsd, modud instructions
...
|
||
|
Linus Torvalds
|
ae5906ceee |
Merge branch 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris: - Extend LSM stacking to allow sharing of cred, file, ipc, inode, and task blobs. This paves the way for more full-featured LSMs to be merged, and is specifically aimed at LandLock and SARA LSMs. This work is from Casey and Kees. - There's a new LSM from Micah Morton: "SafeSetID gates the setid family of syscalls to restrict UID/GID transitions from a given UID/GID to only those approved by a system-wide whitelist." This feature is currently shipping in ChromeOS. * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (62 commits) keys: fix missing __user in KEYCTL_PKEY_QUERY LSM: Update list of SECURITYFS users in Kconfig LSM: Ignore "security=" when "lsm=" is specified LSM: Update function documentation for cap_capable security: mark expected switch fall-throughs and add a missing break tomoyo: Bump version. LSM: fix return value check in safesetid_init_securityfs() LSM: SafeSetID: add selftest LSM: SafeSetID: remove unused include LSM: SafeSetID: 'depend' on CONFIG_SECURITY LSM: Add 'name' field for SafeSetID in DEFINE_LSM LSM: add SafeSetID module that gates setid calls LSM: add SafeSetID module that gates setid calls tomoyo: Allow multiple use_group lines. tomoyo: Coding style fix. tomoyo: Swicth from cred->security to task_struct->security. security: keys: annotate implicit fall throughs security: keys: annotate implicit fall throughs security: keys: annotate implicit fall through capabilities:: annotate implicit fall through ... |
||
Daniel Borkmann
|
20182390c4 |
bpf: fix replace_map_fd_with_map_ptr's ldimm64 second imm field
Non-zero imm value in the second part of the ldimm64 instruction for
BPF_PSEUDO_MAP_FD is invalid, and thus must be rejected. The map fd
only ever sits in the first instructions' imm field. None of the BPF
loaders known to us are using it, so risk of regression is minimal.
For clarity and consistency, the few insn->{src_reg,imm} occurrences
are rewritten into insn[0].{src_reg,imm}. Add a test case to the BPF
selftest suite as well.
Fixes:
|