Pull x86 mm updates from Ingo Molnar:
"The main x86 MM changes in this cycle were:
- continued native kernel PCID support preparation patches to the TLB
flushing code (Andy Lutomirski)
- various fixes related to 32-bit compat syscall returning address
over 4Gb in applications, launched from 64-bit binaries - motivated
by C/R frameworks such as Virtuozzo. (Dmitry Safonov)
- continued Intel 5-level paging enablement: in particular the
conversion of x86 GUP to the generic GUP code. (Kirill A. Shutemov)
- x86/mpx ABI corner case fixes/enhancements (Joerg Roedel)
- ... plus misc updates, fixes and cleanups"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
mm, zone_device: Replace {get, put}_zone_device_page() with a single reference to fix pmem crash
x86/mm: Fix flush_tlb_page() on Xen
x86/mm: Make flush_tlb_mm_range() more predictable
x86/mm: Remove flush_tlb() and flush_tlb_current_task()
x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly()
x86/mm/64: Fix crash in remove_pagetable()
Revert "x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation"
x86/boot/e820: Remove a redundant self assignment
x86/mm: Fix dump pagetables for 4 levels of page tables
x86/mpx, selftests: Only check bounds-vs-shadow when we keep shadow
x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space
Revert "x86/mm/numa: Remove numa_nodemask_from_meminfo()"
x86/espfix: Add support for 5-level paging
x86/kasan: Extend KASAN to support 5-level paging
x86/mm: Add basic defines/helpers for CONFIG_X86_5LEVEL=y
x86/paravirt: Add 5-level support to the paravirt code
x86/mm: Define virtual memory map for 5-level paging
x86/asm: Remove __VIRTUAL_MASK_SHIFT==47 assert
x86/boot: Detect 5-level paging support
x86/mm/numa: Remove numa_nodemask_from_meminfo()
...
Maps of per-cpu type have their value element size adjusted to 8 if it
is specified smaller during various map operations.
This makes test_maps as a 32-bit binary fail, in fact the kernel
writes past the end of the value's array on the user's stack.
To be quite honest, I think the kernel should reject creation of a
per-cpu map that doesn't have a value size of at least 8 if that's
what the kernel is going to silently adjust to later.
If the user passed something smaller, it is a sizeof() calcualtion
based upon the type they will actually use (just like in this testcase
code) in later calls to the map operations.
Fixes: df570f5772 ("samples/bpf: unit test for BPF_MAP_TYPE_PERCPU_ARRAY")
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
'psock_fanout' has been failing since commit 4d7b9dc1f3 ("tools:
psock_lib: harden socket filter used by psock tests"). That commit
changed the CBPF filter to examine the full ethernet frame, and was
tested on 'psock_tpacket' which uses SOCK_RAW. But 'psock_fanout' was
also using this same CBPF in two places, for filtering and fanout, on a
SOCK_DGRAM socket.
Change 'psock_fanout' to use SOCK_RAW so that the CBPF program used with
SO_ATTACH_FILTER can examine the entire frame. Create a new CBPF
program for use with PACKET_FANOUT_DATA which ignores the header, as it
cannot see the ethernet header.
Tested: Ran tools/testing/selftests/net/psock_{fanout,tpacket} 10 times,
and they all passed.
Fixes: 4d7b9dc1f3 ("tools: psock_lib: harden socket filter used by psock tests")
Signed-off-by: 'Mike Maloney <maloneykernel@gmail.com>'
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull ftrace testcase update from Steven Rostedt:
"While testing my development branch, without the fix for the pid use
after free bug, the selftest that Namhyung added triggers it. I
figured it would be good to add the test for the bug after the fix,
such that it does not exist without the fix.
I added another patch that lets the test only test part of the pid
filtering, and ignores the function-fork (filtering on children as
well) if the function-fork feature does not exist. This feature is
added by Namhyung just before he added this test. But since the test
tests both with and without the feature, it would be good to let it
not fail if the feature does not exist"
* tag 'trace-v4.11-rc5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
selftests: ftrace: Add check for function-fork before running pid filter test
selftests: ftrace: Add a testcase for function PID filter
Have the func-filter-pid test check for the function-fork option before
testing it. It can still test the pid filtering, but will stop before
testing the function-fork option for children inheriting the pids.
This allows the test to be added before the function-fork feature, but after
a bug fix that triggers one of the bugs the test can cause.
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 4.11:
Headed to stable:
- disable HFSCR[TM] if TM is not supported, fixes a potential host
kernel crash triggered by a hostile guest, but only in
configurations that no one uses
- don't try to fix up misaligned load-with-reservation instructions
- fix flush_(d|i)cache_range() called from modules on little endian
kernels
- add missing global TLB invalidate if cxl is active
- fix missing preempt_disable() in crc32c-vpmsum
And a fix for selftests build changes that went in this release:
- selftests/powerpc: Fix standalone powerpc build
Thanks to: Benjamin Herrenschmidt, Frederic Barrat, Oliver O'Halloran,
Paul Mackerras"
* tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/crypto/crc32c-vpmsum: Fix missing preempt_disable()
powerpc/mm: Add missing global TLB invalidate if cxl is active
powerpc/64: Fix flush_(d|i)cache_range() called from modules
powerpc: Don't try to fix up misaligned load-with-reservation instructions
powerpc: Disable HFSCR[TM] if TM is not supported
selftests/powerpc: Fix standalone powerpc build
Add a couple of test cases, for example, probing for xadd on a spilled
pointer to packet and map_value_adj register, various other map_value_adj
tests including the unaligned load/store, and trying out pointer arithmetic
on map_value_adj register itself. For the unaligned load/store, we need
to figure out whether the architecture has efficient unaligned access and
need to mark affected tests accordingly.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The changes to enable building with a separate output directory, in
commit a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT") broke
building the powerpc selftests on their own, eg:
$ cd tools/testing/selftests/powerpc; make
It was partially fixed in commit e53aff45c4 ("selftests: lib.mk Fix
individual test builds"), which defined OUTPUT for standalone tests. But
that only defines OUTPUT within the Makefile, the value is not exported
so sub-shells can't see it. We could export OUTPUT, but it's actually
cleaner to just expand the value of OUTPUT before we invoke the shell.
Fixes: a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
llvm can optimize the 'if (ptr > data_end)' checks to be in the order
slightly different than the original C code which will confuse verifier.
Like:
if (ptr + 16 > data_end)
return TC_ACT_SHOT;
// may be followed by
if (ptr + 14 > data_end)
return TC_ACT_SHOT;
while llvm can see that 'ptr' is valid for all 16 bytes,
the verifier could not.
Fix verifier logic to account for such case and add a test.
Reported-by: Huapeng Zhou <hzhou@fb.com>
Fixes: 969bf05eb3 ("bpf: direct packet access")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In both kmalloc and prealloc mode the bpf_map_update_elem() is using
per-cpu extra_elems to do atomic update when the map is full.
There are two issues with it. The logic can be misused, since it allows
max_entries+num_cpus elements to be present in the map. And alloc_extra_elems()
at map creation time can fail percpu alloc for large map values with a warn:
WARNING: CPU: 3 PID: 2752 at ../mm/percpu.c:892 pcpu_alloc+0x119/0xa60
illegal size (32824) or align (8) for percpu allocation
The fixes for both of these issues are different for kmalloc and prealloc modes.
For prealloc mode allocate extra num_possible_cpus elements and store
their pointers into extra_elems array instead of actual elements.
Hence we can use these hidden(spare) elements not only when the map is full
but during bpf_map_update_elem() that replaces existing element too.
That also improves performance, since pcpu_freelist_pop/push is avoided.
Unfortunately this approach cannot be used for kmalloc mode which needs
to kfree elements after rcu grace period. Therefore switch it back to normal
kmalloc even when full and old element exists like it was prior to
commit 6c90598174 ("bpf: pre-allocate hash map elements").
Add tests to check for over max_entries and large map values.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Fixes: 6c90598174 ("bpf: pre-allocate hash map elements")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge of 'linux-kselftest-4.11-rc1':
1. Partially removed use of 'test_objs' target, breaking force rebuild of
BPFOBJ, introduced in commit d498f8719a ("bpf: Rebuild bpf.o for any
dependency update").
Update target so dependency on BPFOBJ is restored.
2. Introduced commit 2047f1d8ba ("selftests: Fix the .c linking rule")
which fixes order of LDLIBS.
Commit d02d8986a7 ("bpf: Always test unprivileged programs") added
libcap dependency into CFLAGS. Use LDLIBS instead to fix linking of
test_verifier.
3. Introduced commit d83c3ba0b9 ("selftests: Fix selftests build to
just build, not run tests").
Reordering the Makefile allows us to remove the 'all' target.
Tested both:
selftests/bpf$ make
and
selftests$ make TARGETS=bpf
on Ubuntu 16.04.2.
Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver,
from Steffen Klassert.
2) Fix crashes when user tries to get_next_key on an LPM bpf map, from
Alexei Starovoitov.
3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from
Michal Schmidt.
4) We can get a divide by zero when TCP socket are morphed into
listening state, fix from Eric Dumazet.
5) Fix socket refcounting bugs in skb_complete_wifi_ack() and
skb_complete_tx_timestamp(). From Eric Dumazet.
6) Use after free in dccp_feat_activate_values(), also from Eric
Dumazet.
7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from
Jarod Wilson.
8) Fix use after free in vrf_xmit(), from David Ahern.
9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from
Alexey Kodanev.
10) Properly check napi_complete_done() return value in order to decide
whether to re-enable IRQs or not in amd-xgbe driver, from Thomas
Lendacky.
11) Fix double free of hwmon device in marvell phy driver, from Andrew
Lunn.
12) Don't crash on malformed netlink attributes in act_connmark, from
Etienne Noss.
13) Don't remove routes with a higher metric in ipv6 ECMP route replace,
from Sabrina Dubroca.
14) Don't write into a cloned SKB in ipv6 fragmentation handling, from
Florian Westphal.
15) Fix routing redirect races in dccp and tcp, basically the ICMP
handler can't modify the socket's cached route in it's locked by the
user at this moment. From Jon Maxwell.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits)
qed: Enable iSCSI Out-of-Order
qed: Correct out-of-bound access in OOO history
qed: Fix interrupt flags on Rx LL2
qed: Free previous connections when releasing iSCSI
qed: Fix mapping leak on LL2 rx flow
qed: Prevent creation of too-big u32-chains
qed: Align CIDs according to DORQ requirement
mlxsw: reg: Fix SPVMLR max record count
mlxsw: reg: Fix SPVM max record count
net: Resend IGMP memberships upon peer notification.
dccp: fix memory leak during tear-down of unsuccessful connection request
tun: fix premature POLLOUT notification on tun devices
dccp/tcp: fix routing redirect race
ucc/hdlc: fix two little issue
vxlan: fix ovs support
net: use net->count to check whether a netns is alive or not
bridge: drop netfilter fake rtable unconditionally
ipv6: avoid write to a possibly cloned skb
net: wimax/i2400m: fix NULL-deref at probe
isdn/gigaset: fix NULL-deref at probe
...
Pull some more powerpc fixes from Michael Ellerman:
"The main item is the addition of the Power9 Machine Check handler.
This was delayed to make sure some details were correct, and is as
minimal as possible.
The rest is small fixes, two for the Power9 PMU, two dealing with
obscure toolchain problems, two for the PowerNV IOMMU code (used by
VFIO), and one to fix a crash on 32-bit machines with macio devices
due to missing dma_ops.
Thanks to:
Alexey Kardashevskiy, Cyril Bur, Larry Finger, Madhavan Srinivasan,
Nicholas Piggin"
* tag 'powerpc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: POWER9 machine check handler
powerpc/64s: allow machine check handler to set severity and initiator
powerpc/64s: fix handling of non-synchronous machine checks
powerpc/pmac: Fix crash in dma-mapping.h with NULL dma_ops
powerpc/powernv/ioda2: Update iommu table base on ownership change
powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested
selftests/powerpc: Replace stxvx and lxvx with stxvd2x/lxvd2x
powerpc/perf: Handle sdar_mode for marked event in power9
powerpc/perf: Fix perf_get_data_addr() for power9 DD1
powerpc/boot: Fix zImage TOC alignment
Recent merge of 'linux-kselftest-4.11-rc1' tree broke bpf test build.
None of the tests were building and test_verifier.c had tons of compiler errors.
Fix it and add #ifdef CAP_IS_SUPPORTED to support old versions of libcap.
Tested on centos 6.8 and 7
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
linux/tools/testing/selftests/vm $ make
gcc -Wall -I ../../../../usr/include compaction_test.c -lrt -o /compaction_test
/usr/lib/gcc/x86_64-pc-linux-gnu/4.9.4/../../../../x86_64-pc-linux-gnu/bin/ld: cannot open output file /compaction_test: Permission denied
collect2: error: ld returned 1 exit status
make: *** [../lib.mk:54: /compaction_test] Error 1
Since commit a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT")
selftests/vm build fails if run from the "selftests/vm" directory, but
it works in the selftests/ directory. It's quicker to be able to do a
local vm-only build after a tree wipe and this patch allows for it
again.
Link: http://lkml.kernel.org/r/20170302173738.18994-4-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On POWER8 (ISA 2.07) lxvx and stxvx are defined to be extended mnemonics
of lxvd2x and stxvd2x. For POWER9 (ISA 3.0) the HW architects in their
infinite wisdom made lxvx and stxvx instructions in their own right.
POWER9 aware GCC will use the POWER9 instruction for lxvx and stxvx
causing these selftests to fail on POWER8. Further compounding the
issue, because of the way -mvsx works it will cause the power9
instructions to be used regardless of -mcpu=power8 to GCC or -mpower8 to
AS.
The safest way to address the problem for now is to not use the extended
mnemonic. We don't care how the CPU loads the values from memory since
the tests only performs register comparisons, so using stdvd2x/lxvd2x
does not impact the test.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Acked-by: Balbir Singh<bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull ktest fixes from Steven Rostedt:
"Greg Kroah-Hartman reported to me that the ktest of v4.11-rc1 locked
up in an infinite loop while doing the make mrproper.
Looking into the cause I noticed that a recent update to the function
run_command (used for running all shell commands, including "make
mrproper") changed the internal loop to use the function
wait_for_input.
The wait_for_input function uses select to look at two file
descriptors. One is the file descriptor of the command it is running,
the other is STDIN. The STDIN check was not checking the return status
of the sysread call, and was also just writing a lot of data into
syswrite without regard to the size of the data read.
Changing the code to check the return status of sysread, and also to
still process the passed in descriptor data without looping back to
the select fixed Greg's problem.
While looking at this code I also realized that the loop did not honor
the timeout if STDIN always had input (or for some reason return
error). this could prevent wait_for_input to timeout on the file
descriptor it is suppose to be waiting for. That is fixed too"
* tag 'ktest-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Make sure wait_for_input does honor the timeout
ktest: Fix while loop in wait_for_input
The function wait_for_input takes in a timeout, and even has a default
timeout. But if for some reason the STDIN descriptor keeps sending in data,
the function will never time out. The timout is to wait for the data from
the passed in file descriptor, not for STDIN. Adding a test in the case
where there's no data from the passed in file descriptor that checks to see
if the timeout passed, will ensure that it will timeout properly even if
there's input in STDIN.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The run_command function was changed to use the wait_for_input function to
allow having a timeout if the command to run takes too much time. There was
a bug in the wait_for_input where it could end up going into an infinite
loop. There's two issues here. One is that the return value of the sysread
wasn't used for the write (to write a proper size), and that it should
continue processing the passed in file descriptor too even if there was
input. There was no check for error, if for some reason STDIN returned an
error, the function would go into an infinite loop and never exit.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 6e98d1b441 ("ktest: Add timeout to ssh command")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull x86 fixes from Ingo Molnar:
"Misc fixes and minor updates all over the place:
- an SGI/UV fix
- a defconfig update
- a build warning fix
- move the boot_params file to the arch location in debugfs
- a pkeys fix
- selftests fix
- boot message fixes
- sparse fixes
- a resume warning fix
- ioapic hotplug fixes
- reboot quirks
... plus various minor cleanups"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build/x86_64_defconfig: Enable CONFIG_R8169
x86/reboot/quirks: Add ASUS EeeBook X205TA/W reboot quirk
x86/hpet: Prevent might sleep splat on resume
x86/boot: Correct setup_header.start_sys name
x86/purgatory: Fix sparse warning, symbol not declared
x86/purgatory: Make functions and variables static
x86/events: Remove last remnants of old filenames
x86/pkeys: Check against max pkey to avoid overflows
x86/ioapic: Split IOAPIC hot-removal into two steps
x86/PCI: Implement pcibios_release_device to release IRQ from IOAPIC
x86/intel_rdt: Remove duplicate inclusion of linux/cpu.h
x86/vmware: Remove duplicate inclusion of asm/timer.h
x86/hyperv: Hide unused label
x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirk
x86/platform/uv/BAU: Fix HUB errors by remove initial write to sw-ack register
x86/selftests: Add clobbers for int80 on x86_64
x86/apic: Simplify enable_IR_x2apic(), remove try_to_enable_IR()
x86/apic: Fix a warning message in logical CPU IDs allocation
x86/kdebugfs: Move boot params hierarchy under (debugfs)/x86/
Pull idr fix (and new tests) from Matthew Wilcox:
"One urgent patch in here; freeing the correct IDA bitmap.
Everything else is changes to the test suite"
* 'idr-4.11' of git://git.infradead.org/users/willy/linux-dax:
radix tree test suite: Specify -m32 in LDFLAGS too
ida: Free correct IDA bitmap
radix tree test suite: Depend on Makefile and quieten grep
radix tree test suite: Fix build with --as-needed
radix tree test suite: Build 32 bit binaries
radix tree test suite: Add performance test for radix_tree_join()
radix tree test suite: Add performance test for radix_tree_split()
radix tree test suite: Add performance benchmarks
radix tree test suite: Add test for radix_tree_clear_tags()
radix tree test suite: Add tests for ida_simple_get() and ida_simple_remove()
radix tree test suite: Add test for idr_get_next()
