Rework the CPU selection in the migration worker to ensure the specified
number of migrations are performed when the test iteslf is affined to a
subset of CPUs. The existing logic skips iterations if the target CPU is
not in the original set of possible CPUs, which causes the test to fail
if too many iterations are skipped.
==== Test Assertion Failure ====
rseq_test.c:228: i > (NR_TASK_MIGRATIONS / 2)
pid=10127 tid=10127 errno=4 - Interrupted system call
1 0x00000000004018e5: main at rseq_test.c:227
2 0x00007fcc8fc66bf6: ?? ??:0
3 0x0000000000401959: _start at ??:?
Only performed 4 KVM_RUNs, task stalled too much?
Calculate the min/max possible CPUs as a cheap "best effort" to avoid
high runtimes when the test is affined to a small percentage of CPUs.
Alternatively, a list or xarray of the possible CPUs could be used, but
even in a horrendously inefficient setup, such optimizations are not
needed because the runtime is completely dominated by the cost of
migrating the task, and the absolute runtime is well under a minute in
even truly absurd setups, e.g. running on a subset of vCPUs in a VM that
is heavily overcommited (16 vCPUs per pCPU).
Fixes: 61e52f1630 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs")
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210929234112.1862848-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compiling the KVM selftests with clang emits the following warning:
>> include/x86_64/processor.h:297:25: error: variable 'xmm0' is uninitialized when used here [-Werror,-Wuninitialized]
>> return (unsigned long)xmm0;
where xmm0 is accessed via an uninitialized register variable.
Indeed, this is a misuse of register variables, which really should only
be used for specifying register constraints on variables passed to
inline assembly. Rather than attempting to read xmm registers via
register variables, just explicitly perform the movq from the desired
xmm register.
Fixes: 783e9e5126 ("kvm: selftests: add API testing infrastructure")
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210924005147.1122357-1-oupton@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While x86 does not require any additional setup to use the ucall
infrastructure, arm64 needs to set up the MMIO address used to signal a
ucall to userspace. rseq_test does not initialize the MMIO address,
resulting in the test spinning indefinitely.
Fix the issue by calling ucall_init() during setup.
Fixes: 61e52f1630 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs")
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210923220033.4172362-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Test that if:
* L1 disables virtual interrupt masking, and INTR intercept.
* L1 setups a virtual interrupt to be injected to L2 and enters L2 with
interrupts disabled, thus the virtual interrupt is pending.
* Now an external interrupt arrives in L1 and since
L1 doesn't intercept it, it should be delivered to L2 when
it enables interrupts.
to do this L0 (abuses) V_IRQ to setup an
interrupt window, and returns to L2.
* L2 enables interrupts.
This should trigger the interrupt window,
injection of the external interrupt and delivery
of the virtual interrupt that can now be done.
* Test that now L2 gets those interrupts.
This is the test that demonstrates the issue that was
fixed in the previous patch.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The calculation to get the per-slot dirty bitmap was incorrect leading
to a buffer overrun. Fix it by splitting out the dirty bitmap into a
separate bitmap per slot.
Fixes: 609e6202ea ("KVM: selftests: Support multiple slots in dirty_log_perf_test")
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210917173657.44011-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All selftests that support the backing_src option were printing their
own description of the flag and then calling backing_src_help() to dump
the list of available backing sources. Consolidate the flag printing in
backing_src_help() to align indentation, reduce duplicated strings, and
improve consistency across tests.
Note: Passing "-s" to backing_src_help is unnecessary since every test
uses the same flag. However I decided to keep it for code readability
at the call sites.
While here this opportunistically fixes the incorrectly interleaved
printing -x help message and list of backing source types in
dirty_log_perf_test.
Fixes: 609e6202ea ("KVM: selftests: Support multiple slots in dirty_log_perf_test")
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210917173657.44011-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SMC64 calling convention passes a function identifier in w0 and its
parameters in x1-x17. Given this, there are two deviations in the
SMC64 call performed by the steal_time test: the function identifier is
assigned to a 64 bit register and the parameter is only 32 bits wide.
Align the call with the SMCCC by using a 32 bit register to handle the
function identifier and increasing the parameter width to 64 bits.
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210921171121.2148982-3-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The logical not operator applies only to the left hand side of a bitwise
operator. As such, the check for POLLIN not being set in revents wrong.
Fix it by adding parentheses around the bitwise expression.
Fixes: 4f72180eb4 ("KVM: selftests: Add demand paging content to the demand paging test")
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210921171121.2148982-2-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a test to verify an rseq's CPU ID is updated correctly if the task is
migrated while the kernel is handling KVM_RUN. This is a regression test
for a bug introduced by commit 72c3c0fe54 ("x86/kvm: Use generic xfer
to guest work function"), where TIF_NOTIFY_RESUME would be cleared by KVM
without updating rseq, leading to a stale CPU ID and other badness.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Message-Id: <20210901203030.1292304-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Should not use comparison of unsigned expressions < 0.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2021-09-14
The following pull-request contains BPF updates for your *net* tree.
We've added 7 non-merge commits during the last 13 day(s) which contain
a total of 18 files changed, 334 insertions(+), 193 deletions(-).
The main changes are:
1) Fix mmap_lock lockdep splat in BPF stack map's build_id lookup, from Yonghong Song.
2) Fix BPF cgroup v2 program bypass upon net_cls/prio activation, from Daniel Borkmann.
3) Fix kvcalloc() BTF line info splat on oversized allocation attempts, from Bixuan Cui.
4) Fix BPF selftest build of task_pt_regs test for arm64/s390, from Jean-Philippe Brucker.
5) Fix BPF's disasm.{c,h} to dual-license so that it is aligned with bpftool given the former
is a build dependency for the latter, from Daniel Borkmann with ACKs from contributors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Minimal selftest which implements a small BPF policy program to the
connect(2) hook which rejects TCP connection requests to port 60123
with EPERM. This is being attached to a non-root cgroup v2 path. The
test asserts that this works under cgroup v2-only and under a mixed
cgroup v1/v2 environment where net_classid is set in the former case.
Before fix:
# ./test_progs -t cgroup_v1v2
test_cgroup_v1v2:PASS:server_fd 0 nsec
test_cgroup_v1v2:PASS:client_fd 0 nsec
test_cgroup_v1v2:PASS:cgroup_fd 0 nsec
test_cgroup_v1v2:PASS:server_fd 0 nsec
run_test:PASS:skel_open 0 nsec
run_test:PASS:prog_attach 0 nsec
test_cgroup_v1v2:PASS:cgroup-v2-only 0 nsec
run_test:PASS:skel_open 0 nsec
run_test:PASS:prog_attach 0 nsec
run_test:PASS:join_classid 0 nsec
(network_helpers.c:219: errno: None) Unexpected success to connect to server
test_cgroup_v1v2:FAIL:cgroup-v1v2 unexpected error: -1 (errno 0)
#27 cgroup_v1v2:FAIL
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
After fix:
# ./test_progs -t cgroup_v1v2
#27 cgroup_v1v2:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210913230759.2313-3-daniel@iogearbox.net
The basic TM vs syscall test code hard codes an sc instruction for the
system call, which fails to cover scv even when the userspace libc has
support for it.
Duplicate the tests with hard coded scv variants so both are tested
when possible.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix build on old toolchains by using .long for scv]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210903125707.1601269-2-npiggin@gmail.com
If altname deletion of the short alternative name fails, the error
message printed is: "Failed to add short alternative name".
This is obviously a typo, as we are testing altname deletion.
Fix this using a proper error message.
Fixes: f95e6c9c46 ("selftest: net: add alternative names test")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull virtio updates from Michael Tsirkin:
- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
block devices
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
Pull more tracing updates from Steven Rostedt:
- Add migrate-disable counter to tracing header
- Fix error handling in event probes
- Fix missed unlock in osnoise in error path
- Fix merge issue with tools/bootconfig
- Clean up bootconfig data when init memory is removed
- Fix bootconfig to loop only on subkeys
- Have kernel command lines override bootconfig options
- Increase field counts for synthetic events
- Have histograms dynamic allocate event elements to save space
- Fixes in testing and documentation
* tag 'trace-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/boot: Fix to loop on only subkeys
selftests/ftrace: Exclude "(fault)" in testing add/remove eprobe events
tracing: Dynamically allocate the per-elt hist_elt_data array
tracing: synth events: increase max fields count
tools/bootconfig: Show whole test command for each test case
bootconfig: Fix missing return check of xbc_node_compose_key function
tools/bootconfig: Fix tracing_on option checking in ftrace2bconf.sh
docs: bootconfig: Add how to use bootconfig for kernel parameters
init/bootconfig: Reorder init parameter from bootconfig and cmdline
init: bootconfig: Remove all bootconfig data when the init memory is removed
tracing/osnoise: Fix missed cpus_read_unlock() in start_per_cpu_kthreads()
tracing: Fix some alloc_event_probe() error handling bugs
tracing: Add migrate-disabled counter to tracing output.
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
The original test for adding and removing eprobes used synthetic events
and retrieved the filename from the open system call at the end of the
system call. This would allow it to always be loaded into the page tables
when accessed.
Masami suggested that the test was too complex for just testing add and
remove, so it was changed to test just adding and removing an event probe
on top of the start of the open system call event. Now it is possible that
the filename will not be loaded into memory at the time the eprobe is
triggered, and will result in "(fault)" being displayed in the event. This
causes the test to fail.
Account for "(fault)" also being one of the values of the filename field
of the event probe.
Link: https://lkml.kernel.org/r/20210907230429.5783d519@rorschach.local.home
Fixes: 079db70794 ("selftests/ftrace: Add test case to test adding and removing of event probe")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
