- Fourcc modifier for tiled but not compressed layouts
- Support for userspace allocated IOVA (GPU virtual address)
- Devfreq clamp_to_idle fix
- DPU: DSC (Display Stream Compression) support
- DPU: inline rotation support on SC7280
- DPU: update DP timings to follow vendor recommendations
- DP, DPU: add support for wide bus (on newer chipsets)
- DP: eDP support
- Merge DPU1 and MDP5 MDSS driver, make dpu/mdp device the master
component
- MDSS: optionally reset the IP block at the bootup to drop
bootloader state
- Properly register and unregister internal bridges in the DRM framework
- Complete DPU IRQ cleanup
- DP: conversion to use drm_bridge and drm_bridge_connector
- eDP: drop old eDP parts again
- DPU: writeback support
- Misc small fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvJCr_1D8d0dgmyQC5HD4gmXeZw=bFV_CNCfceZbpMxRw@mail.gmail.com
Current port description doesn't cover all possible cases. It currently
expects one single port with two endpoints.
When the HDMI connector is described in the device tree there can be two
ports, first one going to the VOP and the second one going to the connector.
Also on SoCs which only have a single VOP there will be only one
endpoint instead of two.
This patch addresses both issues. With this there can either be a single
port ("port") , or two of them ("port@0", "port@1") when the connector
is also in the device tree. Also the first or only port can either have
one endpoint ("endpoint") for single VOP SoCs or two ("endpoint@0",
"endpoint@1") for dual VOP SoCs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-25-s.hauer@pengutronix.de
Linux 5.18-rc5
There was a build fix for arm I wanted in drm-next, so backmerge rather then cherry-pick.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.18-rc5 for some
reported issues and new quirks. They include:
- dwc3 driver fixes
- xhci driver fixes
- typec driver fixes
- new usb-serial driver ids
- added new USB devices to existing quirk tables
- other tiny fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits)
usb: phy: generic: Get the vbus supply
usb: dwc3: gadget: Return proper request status
usb: dwc3: pci: add support for the Intel Meteor Lake-P
usb: dwc3: core: Only handle soft-reset in DCTL
usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()
usb: misc: eud: Fix an error handling path in eud_probe()
usb: core: Don't hold the device lock while sleeping in do_proc_control()
usb: dwc3: Try usb-role-switch first in dwc3_drd_init
usb: dwc3: core: Fix tx/rx threshold settings
usb: mtu3: fix USB 3.0 dual-role-switch from device to host
xhci: Enable runtime PM on second Alderlake controller
usb: dwc3: fix backwards compat with rockchip devices
dt-bindings: usb: samsung,exynos-usb2: add missing required reg
usb: misc: fix improper handling of refcount in uss720_probe()
USB: Fix ehci infinite suspend-resume loop issue in zhaoxin
usb: typec: tcpm: Fix undefined behavior due to shift overflowing the constant
usb: typec: rt1719: Fix build error without CONFIG_POWER_SUPPLY
usb: typec: ucsi: Fix role swapping
usb: typec: ucsi: Fix reuse of completion structure
usb: xhci: tegra:Fix PM usage reference leak of tegra_xusb_unpowergate_partitions
...
Pull ARM SoC fixes from Arnd Bergmann:
- A fix for a regression caused by the previous set of bugfixes
changing tegra and at91 pinctrl properties.
More work is needed to figure out what this should actually be, but a
revert makes it work for the moment.
- Defconfig regression fixes for tegra after renamed symbols
- Build-time warning and static checker fixes for imx, op-tee, sunxi,
meson, at91, and omap
- More at91 DT fixes for audio, regulator and spi nodes
- A regression fix for Renesas Hyperflash memory probe
- A stability fix for amlogic boards, modifying the allowed cpufreq
states
- Multiple fixes for system suspend on omap2+
- DT fixes for various i.MX bugs
- A probe error fix for imx6ull-colibri MMC
- A MAINTAINERS file entry for samsung bug reports
* tag 'soc-fixes-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
Revert "arm: dts: at91: Fix boolean properties with values"
bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()
Revert "arm64: dts: tegra: Fix boolean properties with values"
arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock
ARM: dts: imx6ull-colibri: fix vqmmc regulator
MAINTAINERS: add Bug entry for Samsung and memory controller drivers
memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode
ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35
ARM: dts: am3517-evm: Fix misc pinmuxing
ARM: dts: am33xx-l4: Add missing touchscreen clock properties
ARM: dts: Fix mmc order for omap3-gta04
ARM: dts: at91: fix pinctrl phandles
ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name
ARM: dts: at91: Describe regulators on at91sam9g20ek
ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek
ARM: dts: at91: Fix boolean properties with values
ARM: dts: at91: use generic node name for dataflash
ARM: dts: at91: align SPI NOR node name with dtschema
ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines
ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines
...
Pull clk fixes from Stephen Boyd:
"A semi-large pile of clk driver fixes this time around.
Nothing is touching the core so these fixes are fairly well contained
to specific devices that use these clk drivers.
- Some Allwinner SoC fixes to gracefully handle errors and mark an
RTC clk as critical so that the RTC keeps ticking.
- Fix AXI bus clks and RTC clk design for Microchip PolarFire SoC
driver introduced this cycle. This has some devicetree bits acked
by riscv maintainers. We're fixing it now so that the prior
bindings aren't released in a major kernel version.
- Remove a reset on Microchip PolarFire SoCs that broke when enabling
CONFIG_PM.
- Set a min/max for the Qualcomm graphics clk. This got broken by the
clk rate range patches introduced this cycle"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()
clk: sunxi-ng: sun6i-rtc: Mark rtc-32k as critical
riscv: dts: microchip: reparent mpfs clocks
clk: microchip: mpfs: add RTCREF clock control
clk: microchip: mpfs: re-parent the configurable clocks
dt-bindings: rtc: add refclk to mpfs-rtc
dt-bindings: clk: mpfs: add defines for two new clocks
dt-bindings: clk: mpfs document msspll dri registers
riscv: dts: microchip: fix usage of fic clocks on mpfs
clk: microchip: mpfs: mark CLK_ATHENA as critical
clk: microchip: mpfs: fix parents for FIC clocks
clk: qcom: clk-rcg2: fix gfx3d frequency calculation
clk: microchip: mpfs: don't reset disabled peripherals
clk: sunxi-ng: fix not NULL terminated coccicheck error
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and netfilter.
Current release - new code bugs:
- bridge: switchdev: check br_vlan_group() return value
- use this_cpu_inc() to increment net->core_stats, fix preempt-rt
Previous releases - regressions:
- eth: stmmac: fix write to sgmii_adapter_base
Previous releases - always broken:
- netfilter: nf_conntrack_tcp: re-init for syn packets only,
resolving issues with TCP fastopen
- tcp: md5: fix incorrect tcp_header_len for incoming connections
- tcp: fix F-RTO may not work correctly when receiving DSACK
- tcp: ensure use of most recently sent skb when filling rate samples
- tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
- virtio_net: fix wrong buf address calculation when using xdp
- xsk: fix forwarding when combining copy mode with busy poll
- xsk: fix possible crash when multiple sockets are created
- bpf: lwt: fix crash when using bpf_skb_set_tunnel_key() from
bpf_xmit lwt hook
- sctp: null-check asoc strreset_chunk in sctp_generate_reconf_event
- wireguard: device: check for metadata_dst with skb_valid_dst()
- netfilter: update ip6_route_me_harder to consider L3 domain
- gre: make o_seqno start from 0 in native mode
- gre: switch o_seqno to atomic to prevent races in collect_md mode
Misc:
- add Eric Dumazet to networking maintainers
- dt: dsa: realtek: remove realtek,rtl8367s string
- netfilter: flowtable: Remove the empty file"
* tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
tcp: fix F-RTO may not work correctly when receiving DSACK
Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"
net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK
ixgbe: ensure IPsec VF<->PF compatibility
MAINTAINERS: Update BNXT entry with firmware files
netfilter: nft_socket: only do sk lookups when indev is available
net: fec: add missing of_node_put() in fec_enet_init_stop_mode()
bnx2x: fix napi API usage sequence
tls: Skip tls_append_frag on zero copy size
Add Eric Dumazet to networking maintainers
netfilter: conntrack: fix udp offload timeout sysctl
netfilter: nf_conntrack_tcp: re-init for syn packets only
net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK
net: Use this_cpu_inc() to increment net->core_stats
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
Bluetooth: hci_event: Fix creating hci_conn object on error status
Bluetooth: hci_event: Fix checking for invalid handle on error status
ice: fix use-after-free when deinitializing mailbox snapshot
ice: wait 5 s for EMP reset after firmware flash
ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg()
...
Pull regulator fix from Mark Brown:
"A minor fix for the DT binding documentation of the rt5190a driver"
* tag 'regulator-fix-v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: Revise the rt5190a buck/ldo description
So far, the binding and driver have relied on the fact that the H6
clocks are both a prefix and a subset of the R40 clocks. This allows
them to share the clocks/clock-names items and the clock-output-names
order between the hardware variants.
However, the D1 hardware has TCON TV0 and DSI, but no TCON TV1. This
cannot be supported by the existing scheme because it puts a gap in the
middle of the item lists. To prepare for adding D1 support, use separate
lists for variants with different combinations of clocks.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-2-samuel@sholland.org
Dave Airlie
Sascha Hauer
Benjamin Gaignard
Maxime Ripard
Marek Vasut
Bjorn Andersson
Linus Torvalds
Fabio Estevam
Samuel Holland
Conor Dooley