mirror of
https://github.com/ukui/kernel.git
synced 2026-03-09 10:07:04 -07:00
c271cc9febaaa1bcbc0842d1ee30466aa6148ea8
8901 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Arun Ajith S
|
3e0b8f529c |
net/ipv6: Expand and rename accept_unsolicited_na to accept_untracked_na
RFC 9131 changes default behaviour of handling RX of NA messages when the
corresponding entry is absent in the neighbour cache. The current
implementation is limited to accept just unsolicited NAs. However, the
RFC is more generic where it also accepts solicited NAs. Both types
should result in adding a STALE entry for this case.
Expand accept_untracked_na behaviour to also accept solicited NAs to
be compliant with the RFC and rename the sysctl knob to
accept_untracked_na.
Fixes:
|
||
 Linus Torvalds
|
7e062cda7d |
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
|
||
|
Linus Torvalds
|
caa2898416 |
linux/types.h: reinstate "__bitwise__" macro for user space use
Commit
|
||
 Sean Young
|
e5499dd725 |
media: lirc: revert removal of unused feature flags
Commit |
||
|
Linus Torvalds
|
bd1b7c1384 |
Merge tag 'for-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features:
- subpage:
- support for PAGE_SIZE > 4K (previously only 64K)
- make it work with raid56
- repair super block num_devices automatically if it does not match
the number of device items
- defrag can convert inline extents to regular extents, up to now
inline files were skipped but the setting of mount option
max_inline could affect the decision logic
- zoned:
- minimal accepted zone size is explicitly set to 4MiB
- make zone reclaim less aggressive and don't reclaim if there are
enough free zones
- add per-profile sysfs tunable of the reclaim threshold
- allow automatic block group reclaim for non-zoned filesystems, with
sysfs tunables
- tree-checker: new check, compare extent buffer owner against owner
rootid
Performance:
- avoid blocking on space reservation when doing nowait direct io
writes (+7% throughput for reads and writes)
- NOCOW write throughput improvement due to refined locking (+3%)
- send: reduce pressure to page cache by dropping extent pages right
after they're processed
Core:
- convert all radix trees to xarray
- add iterators for b-tree node items
- support printk message index
- user bulk page allocation for extent buffers
- switch to bio_alloc API, use on-stack bios where convenient, other
bio cleanups
- use rw lock for block groups to favor concurrent reads
- simplify workques, don't allocate high priority threads for all
normal queues as we need only one
- refactor scrub, process chunks based on their constraints and
similarity
- allocate direct io structures on stack and pass around only
pointers, avoids allocation and reduces potential error handling
Fixes:
- fix count of reserved transaction items for various inode
operations
- fix deadlock between concurrent dio writes when low on free data
space
- fix a few cases when zones need to be finished
VFS, iomap:
- add helper to check if sb write has started (usable for assertions)
- new helper iomap_dio_alloc_bio, export iomap_dio_bio_end_io"
* tag 'for-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (173 commits)
btrfs: zoned: introduce a minimal zone size 4M and reject mount
btrfs: allow defrag to convert inline extents to regular extents
btrfs: add "0x" prefix for unsupported optional features
btrfs: do not account twice for inode ref when reserving metadata units
btrfs: zoned: fix comparison of alloc_offset vs meta_write_pointer
btrfs: send: avoid trashing the page cache
btrfs: send: keep the current inode open while processing it
btrfs: allocate the btrfs_dio_private as part of the iomap dio bio
btrfs: move struct btrfs_dio_private to inode.c
btrfs: remove the disk_bytenr in struct btrfs_dio_private
btrfs: allocate dio_data on stack
iomap: add per-iomap_iter private data
iomap: allow the file system to provide a bio_set for direct I/O
btrfs: add a btrfs_dio_rw wrapper
btrfs: zoned: zone finish unused block group
btrfs: zoned: properly finish block group on metadata write
btrfs: zoned: finish block group when there are no more allocatable bytes left
btrfs: zoned: consolidate zone finish functions
btrfs: zoned: introduce btrfs_zoned_bg_is_full
btrfs: improve error reporting in lookup_inline_extent_backref
...
|
||
|
Linus Torvalds
|
65965d9530 |
Merge tag 'erofs-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs (and fscache) updates from Gao Xiang:
"After working on it on the mailing list for more than half a year, we
finally form 'erofs over fscache' feature into shape. Hopefully it
could bring more possibility to the communities.
The story mainly started from a new project what we called "RAFS v6" [1]
for Nydus image service almost a year ago, which enhances EROFS to be
a new form of one bootstrap (which includes metadata representing the
whole fs tree) + several data-deduplicated content addressable blobs
(actually treated as multiple devices). Each blob can represent one
container image layer but not quite exactly since all new data can be
fully existed in the previous blobs so no need to introduce another
new blob.
It is actually not a new idea (at least on my side it's much like a
simpilied casync [2] for now) and has many benefits over per-file
blobs or some other exist ways since typically each RAFS v6 image only
has dozens of device blobs instead of thousands of per-file blobs.
It's easy to be signed with user keys as a golden image, transfered
untouchedly with minimal overhead over the network, kept in some type
of storage conveniently, and run with (optional) runtime verification
but without involving too many irrelevant features crossing the system
beyond EROFS itself. At least it's our final goal and we're keeping
working on it. There was also a good summary of this approach from the
casync author [3].
Regardless further optimizations, this work is almost done in the
previous Linux release cycles. In this round, we'd like to introduce
on-demand load for EROFS with the fscache/cachefiles infrastructure,
considering the following advantages:
- Introduce new file-based backend to EROFS. Although each image only
contains dozens of blobs but in densely-deployed runC host for
example, there could still be massive blobs on a machine, which is
messy if each blob is treated as a device. In contrast, fscache and
cachefiles are really great interfaces for us to make them work.
- Introduce on-demand load to fscache and EROFS. Previously, fscache
is mainly used to caching network-likewise filesystems, now it can
support on-demand downloading for local fses too with the exact
localfs on-disk format. It has many advantages which we're been
described in the latest patchset cover letter [4]. In addition to
that, most importantly, the cached data is still stored in the
original local fs on-disk format so that it's still the one signed
with private keys but only could be partially available. Users can
fully trust it during running. Later, users can also back up
cachefiles easily to another machine.
- More reliable on-demand approach in principle. After data is all
available locally, user daemon can be no longer online in some use
cases, which helps daemon crash recovery (filesystems can still in
service) and hot-upgrade (user daemon can be upgraded more
frequently due to new features or protocols introduced.)
- Other format can also be converted to EROFS filesystem format over
the internet on the fly with the new on-demand load feature and
mounted. That is entirely possible with on-demand load feature as
long as such archive format metadata can be fetched in advance like
stargz.
In addition, although currently our target user is Nydus image service [5],
but laterly, it can be used for other use cases like on-demand system
booting, etc. As for the fscache on-demand load feature itself,
strictly it can be used for other local fses too. Laterly we could
promote most code to the iomap infrastructure and also enhance it in
the read-write way if other local fses are interested.
Thanks David Howells for taking so much time and patience on this
these months, many thanks with great respect here again! Thanks Jeffle
for working on this feature and Xin Yin from Bytedance for
asynchronous I/O implementation as well as Zichen Tian, Jia Zhu, and
Yan Song for testing, much appeciated. We're also exploring more
possibly over fscache cache management over FSDAX for secure
containers and working on more improvements and useful features for
fscache, cachefiles, and on-demand load.
In addition to "erofs over fscache", NFS export and idmapped mount are
also completed in this cycle for container use cases as well.
Summary:
- Add erofs on-demand load support over fscache
- Support NFS export for erofs
- Support idmapped mounts for erofs
- Don't prompt for risk any more when using big pcluster
- Fix buffer copy overflow of ztailpacking feature
- Several minor cleanups"
[1] https://lore.kernel.org/r/20210730194625.93856-1-hsiangkao@linux.alibaba.com
[2] https://github.com/systemd/casync
[3] http://0pointer.net/blog/casync-a-tool-for-distributing-file-system-images.html
[4] https://lore.kernel.org/r/20220509074028.74954-1-jefflexu@linux.alibaba.com
[5] https://github.com/dragonflyoss/image-service
* tag 'erofs-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: (29 commits)
erofs: scan devices from device table
erofs: change to use asynchronous io for fscache readpage/readahead
erofs: add 'fsid' mount option
erofs: implement fscache-based data readahead
erofs: implement fscache-based data read for inline layout
erofs: implement fscache-based data read for non-inline layout
erofs: implement fscache-based metadata read
erofs: register fscache context for extra data blobs
erofs: register fscache context for primary data blob
erofs: add erofs_fscache_read_folios() helper
erofs: add anonymous inode caching metadata for data blobs
erofs: add fscache context helper functions
erofs: register fscache volume
erofs: add fscache mode check helper
erofs: make erofs_map_blocks() generally available
cachefiles: document on-demand read mode
cachefiles: add tracepoints for on-demand read mode
cachefiles: enable on-demand read mode
cachefiles: implement on-demand read
cachefiles: notify the user daemon when withdrawing cookie
...
|
||
|
Linus Torvalds
|
827060261c |
Merge tag 'media/v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab: - dvb-usb drivers entries got reworked to avoid usage of magic numbers to refer to data position inside tables - vcodec driver has gained support for MT8186 and for vp8 and vp9 stateless codecs - hantro has gained support for Hantro G1 on RK366x - Added more h264 levels on coda960 - ccs gained support for MIPI CSI-2 28 bits per pixel raw data type - venus driver gained support for Qualcomm custom compressed pixel formats - lots of driver fixes and updates * tag 'media/v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: hantro: Enable HOLD_CAPTURE_BUF for H.264 media: hantro: Add H.264 field decoding support media: hantro: h264: Make dpb entry management more robust media: hantro: Stop using H.264 parameter pic_num media: rkvdec: Enable capture buffer holding for H264 media: rkvdec-h264: Add field decoding support media: rkvdec: Ensure decoded resolution fit coded resolution media: rkvdec: h264: Fix reference frame_num wrap for second field media: rkvdec: h264: Validate and use pic width and height in mbs media: rkvdec: Move H264 SPS validation in rkvdec-h264 media: rkvdec: h264: Fix bit depth wrap in pps packet media: rkvdec: h264: Fix dpb_valid implementation media: rkvdec: Stop overclocking the decoder media: v4l2: Reorder field reflist media: h264: Sort p/b reflist using frame_num media: v4l2: Trace calculated p/b0/b1 initial reflist media: h264: Store all fields into the unordered list media: h264: Store current picture fields media: h264: Increase reference lists size to 32 media: h264: Use v4l2_h264_reference for reflist ... |
||
|
Linus Torvalds
|
aa051d36ce |
Merge tag 'for-linus-2022052401' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina: - support for pens with 3 buttons with Wacom driver (Joshua Dickens) - support for HID_DG_SCANTIME to report the timestamp for pen and touch events in Wacom driver (Joshua Dickens) - support for sensor discovery in amd-sfh driver (Basavaraj Natikar) - support for wider variety of Huion tablets ported from DIGImend project (José Expósito, Nikolai Kondrashov) - new device IDs and other assorted small code cleanups * tag 'for-linus-2022052401' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (44 commits) HID: apple: Properly handle function keys on Keychron keyboards HID: uclogic: Switch to Digitizer usage for styluses HID: uclogic: Add pen support for XP-PEN Star 06 HID: uclogic: Differentiate touch ring and touch strip HID: uclogic: Always shift touch reports to zero HID: uclogic: Do not focus on touch ring only HID: uclogic: Return raw parameters from v2 pen init HID: uclogic: Move param printing to a function HID: core: Display "SENSOR HUB" for sensor hub bus string in hid_info HID: amd_sfh: Move bus declaration outside of amd-sfh HID: amd_sfh: Add physical location to HID device HID: amd_sfh: Modify the hid name HID: amd_sfh: Modify the bus name HID: amd_sfh: Add sensor name by index for debug info HID: amd_sfh: Add support for sensor discovery HID: bigben: fix slab-out-of-bounds Write in bigben_probe Hid: wacom: Fix kernel test robot warning HID: uclogic: Disable pen usage for Huion keyboard interfaces HID: uclogic: Support disabling pen usage HID: uclogic: Pass keyboard reports as is ... |
||
|
Linus Torvalds
|
d8e0f976f1 |
Merge tag 'spi-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is quite a quiet release but some new drivers mean that the
diffstat is fairly large. The new drivers include the aspeed driver
which is migrated from MTD as part of the ongoing move of controllers
with specialised support for SPI flashes into the SPI subsystem.
- Support for devices which flip CPHA during recieve only transfers
(eg, if MOSI and MISO have inverted polarity).
- Overhaul of the i.MX driver, including the addition of PIO support
for better performance on small transfers.
- Migration of the Aspeed driver from MTD.
- Support for Aspeed AST2400, Ingenic JZ4775 and X1/2000 and MediaTek
IPM and SFI"
* tag 'spi-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (84 commits)
spi: spi-au1550: replace ternary operator with min()
mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600
spi: aspeed: Calibrate read timings
spi: aspeed: Add support for the AST2400 SPI controller
spi: aspeed: Workaround AST2500 limitations
spi: aspeed: Adjust direct mapping to device size
spi: aspeed: Add support for direct mapping
spi: spi-mem: Convert Aspeed SMC driver to spi-mem
spi: Convert the Aspeed SMC controllers device tree binding
spi: spi-cadence: Update ISR status variable type to irqreturn_t
spi: Doc fix - Describe add_lock and dma_map_dev in spi_controller
spi: cadence-quadspi: Handle spi_unregister_master() in remove()
spi: stm32-qspi: Remove SR_BUSY bit check before sending command
spi: stm32-qspi: Always check SR_TCF flags in stm32_qspi_wait_cmd()
spi: stm32-qspi: Fix wait_cmd timeout in APM mode
spi: cadence-quadspi: remove unnecessary (void *) casts
spi: cadence-quadspi: Add missing blank line in cqspi_request_mmap_dma()
spi: spi-imx: mx51_ecspi_prepare_message(): skip writing MX51_ECSPI_CONFIG register if unchanged
spi: spi-imx: add PIO polling support
spi: spi-imx: replace struct spi_imx_data::bitbang by pointer to struct spi_controller
...
|
||
|
Linus Torvalds
|
cb44e4f061 |
Merge tag 'landlock-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Landlock updates from Mickaël Salaün: - improve the path_rename LSM hook implementations for RENAME_EXCHANGE; - fix a too-restrictive filesystem control for a rare corner case; - set the nested sandbox limitation to 16 layers; - add a new LANDLOCK_ACCESS_FS_REFER access right to properly handle file reparenting (i.e. full rename and link support); - add new tests and documentation; - format code with clang-format to make it easier to maintain and contribute. * tag 'landlock-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (30 commits) landlock: Explain how to support Landlock landlock: Add design choices documentation for filesystem access rights landlock: Document good practices about filesystem policies landlock: Document LANDLOCK_ACCESS_FS_REFER and ABI versioning samples/landlock: Add support for file reparenting selftests/landlock: Add 11 new test suites dedicated to file reparenting landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER LSM: Remove double path_rename hook calls for RENAME_EXCHANGE landlock: Move filesystem helpers and add a new one landlock: Fix same-layer rule unions landlock: Create find_rule() from unmask_layers() landlock: Reduce the maximum number of layers to 16 landlock: Define access_mask_t to enforce a consistent access mask size selftests/landlock: Test landlock_create_ruleset(2) argument check ordering landlock: Change landlock_restrict_self(2) check ordering landlock: Change landlock_add_rule(2) argument check ordering selftests/landlock: Add tests for O_PATH selftests/landlock: Fully test file rename with "remove" access selftests/landlock: Extend access right tests to directories selftests/landlock: Add tests for unknown access rights ... |
||
|
Linus Torvalds
|
dc8af1ffd6 |
Merge tag 'seccomp-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook: - Rework USER_NOTIF notification ordering and kill logic (Sargun Dhillon) - Improved PTRACE_O_SUSPEND_SECCOMP selftest (Jann Horn) - Gracefully handle failed unshare() in selftests (Yang Guang) - Spelling fix (Colin Ian King) * tag 'seccomp-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests/seccomp: Fix spelling mistake "Coud" -> "Could" selftests/seccomp: Add test for wait killable notifier selftests/seccomp: Refactor get_proc_stat to split out file reading code seccomp: Add wait_killable semantic to seccomp user notifier selftests/seccomp: Ensure that notifications come in FIFO order seccomp: Use FIFO semantics to order notifications selftests/seccomp: Add SKIP for failed unshare() selftests/seccomp: Test PTRACE_O_SUSPEND_SECCOMP without CAP_SYS_ADMIN |
||
|
Linus Torvalds
|
143a6252e1 |
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas: - Initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. No KVM support yet, SME is disabled in guests. - Support for crashkernel reservations above ZONE_DMA via the 'crashkernel=X,high' command line option. - btrfs search_ioctl() fix for live-lock with sub-page faults. - arm64 perf updates: support for the Hisilicon "CPA" PMU for monitoring coherent I/O traffic, support for Arm's CMN-650 and CMN-700 interconnect PMUs, minor driver fixes, kerneldoc cleanup. - Kselftest updates for SME, BTI, MTE. - Automatic generation of the system register macros from a 'sysreg' file describing the register bitfields. - Update the type of the function argument holding the ESR_ELx register value to unsigned long to match the architecture register size (originally 32-bit but extended since ARMv8.0). - stacktrace cleanups. - ftrace cleanups. - Miscellaneous updates, most notably: arm64-specific huge_ptep_get(), avoid executable mappings in kexec/hibernate code, drop TLB flushing from get_clear_flush() (and rename it to get_clear_contig()), ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (145 commits) arm64/sysreg: Generate definitions for FAR_ELx arm64/sysreg: Generate definitions for DACR32_EL2 arm64/sysreg: Generate definitions for CSSELR_EL1 arm64/sysreg: Generate definitions for CPACR_ELx arm64/sysreg: Generate definitions for CONTEXTIDR_ELx arm64/sysreg: Generate definitions for CLIDR_EL1 arm64/sve: Move sve_free() into SVE code section arm64: Kconfig.platforms: Add comments arm64: Kconfig: Fix indentation and add comments arm64: mm: avoid writable executable mappings in kexec/hibernate code arm64: lds: move special code sections out of kernel exec segment arm64/hugetlb: Implement arm64 specific huge_ptep_get() arm64/hugetlb: Use ptep_get() to get the pte value of a huge page arm64: kdump: Do not allocate crash low memory if not needed arm64/sve: Generate ZCR definitions arm64/sme: Generate defintions for SVCR arm64/sme: Generate SMPRI_EL1 definitions arm64/sme: Automatically generate SMPRIMAP_EL2 definitions arm64/sme: Automatically generate SMIDR_EL1 defines arm64/sme: Automatically generate defines for SMCR ... |
||
|
Linus Torvalds
|
eb39e37d5c |
Merge tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull AMD SEV-SNP support from Borislav Petkov: "The third AMD confidential computing feature called Secure Nested Paging. Add to confidential guests the necessary memory integrity protection against malicious hypervisor-based attacks like data replay, memory remapping and others, thus achieving a stronger isolation from the hypervisor. At the core of the functionality is a new structure called a reverse map table (RMP) with which the guest has a say in which pages get assigned to it and gets notified when a page which it owns, gets accessed/modified under the covers so that the guest can take an appropriate action. In addition, add support for the whole machinery needed to launch a SNP guest, details of which is properly explained in each patch. And last but not least, the series refactors and improves parts of the previous SEV support so that the new code is accomodated properly and not just bolted on" * tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) x86/entry: Fixup objtool/ibt validation x86/sev: Mark the code returning to user space as syscall gap x86/sev: Annotate stack change in the #VC handler x86/sev: Remove duplicated assignment to variable info x86/sev: Fix address space sparse warning x86/sev: Get the AP jump table address from secrets page x86/sev: Add missing __init annotations to SEV init routines virt: sevguest: Rename the sevguest dir and files to sev-guest virt: sevguest: Change driver name to reflect generic SEV support x86/boot: Put globals that are accessed early into the .data section x86/boot: Add an efi.h header for the decompressor virt: sevguest: Fix bool function returning negative value virt: sevguest: Fix return value check in alloc_shared_pages() x86/sev-es: Replace open-coded hlt-loop with sev_es_terminate() virt: sevguest: Add documentation for SEV-SNP CPUID Enforcement virt: sevguest: Add support to get extended report virt: sevguest: Add support to derive key virt: Add SEV-SNP guest driver x86/sev: Register SEV-SNP guest request platform device x86/sev: Provide support for SNP guest request NAEs ... |
||
 Jakub Kicinski
|
1ef0736c07 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says: ==================== pull-request: bpf-next 2022-05-23 We've added 113 non-merge commits during the last 26 day(s) which contain a total of 121 files changed, 7425 insertions(+), 1586 deletions(-). The main changes are: 1) Speed up symbol resolution for kprobes multi-link attachments, from Jiri Olsa. 2) Add BPF dynamic pointer infrastructure e.g. to allow for dynamically sized ringbuf reservations without extra memory copies, from Joanne Koong. 3) Big batch of libbpf improvements towards libbpf 1.0 release, from Andrii Nakryiko. 4) Add BPF link iterator to traverse links via seq_file ops, from Dmitrii Dolgov. 5) Add source IP address to BPF tunnel key infrastructure, from Kaixi Fan. 6) Refine unprivileged BPF to disable only object-creating commands, from Alan Maguire. 7) Fix JIT blinding of ld_imm64 when they point to subprogs, from Alexei Starovoitov. 8) Add BPF access to mptcp_sock structures and their meta data, from Geliang Tang. 9) Add new BPF helper for access to remote CPU's BPF map elements, from Feng Zhou. 10) Allow attaching 64-bit cookie to BPF link of fentry/fexit/fmod_ret, from Kui-Feng Lee. 11) Follow-ups to typed pointer support in BPF maps, from Kumar Kartikeya Dwivedi. 12) Add busy-poll test cases to the XSK selftest suite, from Magnus Karlsson. 13) Improvements in BPF selftest test_progs subtest output, from Mykola Lysenko. 14) Fill bpf_prog_pack allocator areas with illegal instructions, from Song Liu. 15) Add generic batch operations for BPF map-in-map cases, from Takshak Chahande. 16) Make bpf_jit_enable more user friendly when permanently on 1, from Tiezhu Yang. 17) Fix an array overflow in bpf_trampoline_get_progs(), from Yuntao Wang. ==================== Link: https://lore.kernel.org/r/20220523223805.27931-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
 Joanne Koong
|
34d4ef5775 |
bpf: Add dynptr data slices
This patch adds a new helper function void *bpf_dynptr_data(struct bpf_dynptr *ptr, u32 offset, u32 len); which returns a pointer to the underlying data of a dynptr. *len* must be a statically known value. The bpf program may access the returned data slice as a normal buffer (eg can do direct reads and writes), since the verifier associates the length with the returned pointer, and enforces that no out of bounds accesses occur. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220523210712.3641569-6-joannelkoong@gmail.com |
||
|
Joanne Koong
|
13bbbfbea7 |
bpf: Add bpf_dynptr_read and bpf_dynptr_write
This patch adds two helper functions, bpf_dynptr_read and bpf_dynptr_write: long bpf_dynptr_read(void *dst, u32 len, struct bpf_dynptr *src, u32 offset); long bpf_dynptr_write(struct bpf_dynptr *dst, u32 offset, void *src, u32 len); The dynptr passed into these functions must be valid dynptrs that have been initialized. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220523210712.3641569-5-joannelkoong@gmail.com |
||
|
Joanne Koong
|
bc34dee65a |
bpf: Dynptr support for ring buffers
Currently, our only way of writing dynamically-sized data into a ring buffer is through bpf_ringbuf_output but this incurs an extra memcpy cost. bpf_ringbuf_reserve + bpf_ringbuf_commit avoids this extra memcpy, but it can only safely support reservation sizes that are statically known since the verifier cannot guarantee that the bpf program won’t access memory outside the reserved space. The bpf_dynptr abstraction allows for dynamically-sized ring buffer reservations without the extra memcpy. There are 3 new APIs: long bpf_ringbuf_reserve_dynptr(void *ringbuf, u32 size, u64 flags, struct bpf_dynptr *ptr); void bpf_ringbuf_submit_dynptr(struct bpf_dynptr *ptr, u64 flags); void bpf_ringbuf_discard_dynptr(struct bpf_dynptr *ptr, u64 flags); These closely follow the functionalities of the original ringbuf APIs. For example, all ringbuffer dynptrs that have been reserved must be either submitted or discarded before the program exits. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: David Vernet <void@manifault.com> Link: https://lore.kernel.org/bpf/20220523210712.3641569-4-joannelkoong@gmail.com |
||
|
Joanne Koong
|
263ae152e9 |
bpf: Add bpf_dynptr_from_mem for local dynptrs
This patch adds a new api bpf_dynptr_from_mem: long bpf_dynptr_from_mem(void *data, u32 size, u64 flags, struct bpf_dynptr *ptr); which initializes a dynptr to point to a bpf program's local memory. For now only local memory that is of reg type PTR_TO_MAP_VALUE is supported. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220523210712.3641569-3-joannelkoong@gmail.com |
||
|
Joanne Koong
|
97e03f5210 |
bpf: Add verifier support for dynptrs
This patch adds the bulk of the verifier work for supporting dynamic
pointers (dynptrs) in bpf.
A bpf_dynptr is opaque to the bpf program. It is a 16-byte structure
defined internally as:
struct bpf_dynptr_kern {
void *data;
u32 size;
u32 offset;
} __aligned(8);
The upper 8 bits of *size* is reserved (it contains extra metadata about
read-only status and dynptr type). Consequently, a dynptr only supports
memory less than 16 MB.
There are different types of dynptrs (eg malloc, ringbuf, ...). In this
patchset, the most basic one, dynptrs to a bpf program's local memory,
is added. For now only local memory that is of reg type PTR_TO_MAP_VALUE
is supported.
In the verifier, dynptr state information will be tracked in stack
slots. When the program passes in an uninitialized dynptr
(ARG_PTR_TO_DYNPTR | MEM_UNINIT), the stack slots corresponding
to the frame pointer where the dynptr resides at are marked
STACK_DYNPTR. For helper functions that take in initialized dynptrs (eg
bpf_dynptr_read + bpf_dynptr_write which are added later in this
patchset), the verifier enforces that the dynptr has been initialized
properly by checking that their corresponding stack slots have been
marked as STACK_DYNPTR.
The 6th patch in this patchset adds test cases that the verifier should
successfully reject, such as for example attempting to use a dynptr
after doing a direct write into it inside the bpf program.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-2-joannelkoong@gmail.com
|
||
|
Linus Torvalds
|
5dc921868c |
Merge tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the driver updates queued up for 5.19. This contains:
- NVMe pull requests via Christoph:
- tighten the PCI presence check (Stefan Roese)
- fix a potential NULL pointer dereference in an error path (Kyle
Miller Smith)
- fix interpretation of the DMRSL field (Tom Yan)
- relax the data transfer alignment (Keith Busch)
- verbose error logging improvements (Max Gurtovoy, Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni, Christoph)
- set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni)
- add support for TP4084 - Time-to-Ready Enhancements (Christoph)
- MD pull request via Song:
- Improve annotation in raid5 code, by Logan Gunthorpe
- Support MD_BROKEN flag in raid-1/5/10, by Mariusz Tkaczyk
- Other small fixes/cleanups
- null_blk series making the configfs side much saner (Damien)
- Various minor drbd cleanups and fixes (Haowen, Uladzislau, Jiapeng,
Arnd, Cai)
- Avoid using the system workqueue (and hence flushing it) in rnbd
(Jack)
- Avoid using the system workqueue (and hence flushing it) in aoe
(Tetsuo)
- Series fixing discard_alignment issues in drivers (Christoph)
- Small series fixing drivers poking at disk->part0 for openers
information (Christoph)
- Series fixing deadlocks in loop (Christoph, Tetsuo)
- Remove loop.h and add SPDX headers (Christoph)
- Various fixes and cleanups (Julia, Xie, Yu)"
* tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block: (72 commits)
mtip32xx: fix typo in comment
nvme: set non-mdts limits in nvme_scan_work
nvme: add support for TP4084 - Time-to-Ready Enhancements
nvme: split the enum used for various register constants
nbd: Fix hung on disconnect request if socket is closed before
nvme-fabrics: add a request timeout helper
nvme-pci: harden drive presence detect in nvme_dev_disable()
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
nvme: mark internal passthru request RQF_QUIET
nvme: remove unneeded include from constants file
nvme: add missing status values to verbose logging
nvme: set dma alignment to dword
nvme: fix interpretation of DMRSL
loop: remove most the top-of-file boilerplate comment from the UAPI header
loop: remove most the top-of-file boilerplate comment
loop: add a SPDX header
loop: remove loop.h
block: null_blk: Improve device creation with configfs
block: null_blk: Cleanup messages
block: null_blk: Cleanup device creation and deletion
...
|
||
|
Linus Torvalds
|
f6792c877a |
Merge tag 'for-5.19/cdrom-2022-05-22' of git://git.kernel.dk/linux-block
Pull cdrom updates from Jens Axboe: "Removal of unused code and documentation updates" * tag 'for-5.19/cdrom-2022-05-22' of git://git.kernel.dk/linux-block: cdrom: remove obsolete TODO list block: remove last remaining traces of IDE documentation cdrom: mark CDROMGETSPINDOWN/CDROMSETSPINDOWN obsolete cdrom: remove the unused driver specific disc change ioctl cdrom: make EXPORT_SYMBOL follow exported function |
||
|
Linus Torvalds
|
9836e93c0a |
Merge tag 'for-5.19/io_uring-passthrough-2022-05-22' of git://git.kernel.dk/linux-block
Pull io_uring NVMe command passthrough from Jens Axboe: "On top of everything else, this adds support for passthrough for io_uring. The initial feature for this is NVMe passthrough support, which allows non-filesystem based IO commands and admin commands. To support this, io_uring grows support for SQE and CQE members that are twice as big, allowing to pass in a full NVMe command without having to copy data around. And to complete with more than just a single 32-bit value as the output" * tag 'for-5.19/io_uring-passthrough-2022-05-22' of git://git.kernel.dk/linux-block: (22 commits) io_uring: cleanup handling of the two task_work lists nvme: enable uring-passthrough for admin commands nvme: helper for uring-passthrough checks blk-mq: fix passthrough plugging nvme: add vectored-io support for uring-cmd nvme: wire-up uring-cmd support for io-passthru on char-device. nvme: refactor nvme_submit_user_cmd() block: wire-up support for passthrough plugging fs,io_uring: add infrastructure for uring-cmd io_uring: support CQE32 for nop operation io_uring: enable CQE32 io_uring: support CQE32 in /proc info io_uring: add tracing for additional CQE32 fields io_uring: overflow processing for CQE32 io_uring: flush completions for CQE32 io_uring: modify io_get_cqe for CQE32 io_uring: add CQE32 completion processing io_uring: add CQE32 setup processing io_uring: change ring size calculation for CQE32 io_uring: store add. return values for CQE32 ... |
||
|
Linus Torvalds
|
e1a8fde720 |
Merge tag 'for-5.19/io_uring-net-2022-05-22' of git://git.kernel.dk/linux-block
Pull io_uring 'more data in socket' support from Jens Axboe: "To be able to fully utilize the 'poll first' support in the core io_uring branch, it's advantageous knowing if the socket was empty after a receive. This adds support for that" * tag 'for-5.19/io_uring-net-2022-05-22' of git://git.kernel.dk/linux-block: io_uring: return hint on whether more data is available after receive tcp: pass back data left in socket after receive |
||
|
Linus Torvalds
|
368da430d0 |
Merge tag 'for-5.19/io_uring-socket-2022-05-22' of git://git.kernel.dk/linux-block
Pull io_uring socket() support from Jens Axboe: "This adds support for socket(2) for io_uring. This is handy when using direct / registered file descriptors with io_uring. Outside of those two patches, a small series from Dylan on top that improves the tracing by providing a text representation of the opcode rather than needing to decode this by reading the header file every time. That sits in this branch as it was the last opcode added (until it wasn't...)" * tag 'for-5.19/io_uring-socket-2022-05-22' of git://git.kernel.dk/linux-block: io_uring: use the text representation of ops in trace io_uring: rename op -> opcode io_uring: add io_uring_get_opcode io_uring: add type to op enum io_uring: add socket(2) support net: add __sys_socket_file() |
||
|
Linus Torvalds
|
09beaff75e |
Merge tag 'for-5.19/io_uring-xattr-2022-05-22' of git://git.kernel.dk/linux-block
Pull io_uring xattr support from Jens Axboe: "Support for the xattr variants" * tag 'for-5.19/io_uring-xattr-2022-05-22' of git://git.kernel.dk/linux-block: io_uring: cleanup error-handling around io_req_complete io_uring: fix trace for reduced sqe padding io_uring: add fgetxattr and getxattr support io_uring: add fsetxattr and setxattr support fs: split off do_getxattr from getxattr fs: split off setxattr_copy and do_setxattr function from setxattr |