There's a risk that a kernel which has full retpoline mitigations becomes
vulnerable when a module gets loaded that hasn't been compiled with the
right compiler or the right option.
To enable detection of that mismatch at module load time, add a module info
string "retpoline" at build time when the module was compiled with
retpoline support. This only covers compiled C source, but assembler source
or prebuilt object files are not checked.
If a retpoline enabled kernel detects a non retpoline protected module at
load time, print a warning and report it in the sysfs vulnerability file.
[ tglx: Massaged changelog ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: gregkh@linuxfoundation.org
Cc: torvalds@linux-foundation.org
Cc: jeyu@kernel.org
Cc: arjan@linux.intel.com
Link: https://lkml.kernel.org/r/20180125235028.31211-1-andi@firstfloor.org
Add injectable error types for each error-injectable function.
One motivation of error injection test is to find software flaws,
mistakes or mis-handlings of expectable errors. If we find such
flaws by the test, that is a program bug, so we need to fix it.
But if the tester miss input the error (e.g. just return success
code without processing anything), it causes unexpected behavior
even if the caller is correctly programmed to handle any errors.
That is not what we want to test by error injection.
To clarify what type of errors the caller must expect for each
injectable function, this introduces injectable error types:
- EI_ETYPE_NULL : means the function will return NULL if it
fails. No ERR_PTR, just a NULL.
- EI_ETYPE_ERRNO : means the function will return -ERRNO
if it fails.
- EI_ETYPE_ERRNO_NULL : means the function will return -ERRNO
(ERR_PTR) or NULL.
ALLOW_ERROR_INJECTION() macro is expanded to get one of
NULL, ERRNO, ERRNO_NULL to record the error type for
each function. e.g.
ALLOW_ERROR_INJECTION(open_ctree, ERRNO)
This error types are shown in debugfs as below.
====
/ # cat /sys/kernel/debug/error_injection/list
open_ctree [btrfs] ERRNO
io_ctl_init [btrfs] ERRNO
====
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since error-injection framework is not limited to be used
by kprobes, nor bpf. Other kernel subsystems can use it
freely for checking safeness of error-injection, e.g.
livepatch, ftrace etc.
So this separate error-injection framework from kprobes.
Some differences has been made:
- "kprobe" word is removed from any APIs/structures.
- BPF_ALLOW_ERROR_INJECTION() is renamed to
ALLOW_ERROR_INJECTION() since it is not limited for BPF too.
- CONFIG_FUNCTION_ERROR_INJECTION is the config item of this
feature. It is automatically enabled if the arch supports
error injection feature for kprobe or ftrace etc.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are two format specifiers to print out a pointer in symbolic
format: '%pS/%ps' and '%pF/%pf'. On most architectures, the two
mean exactly the same thing, but some architectures (ia64, ppc64,
parisc64) use an indirect pointer for C function pointers, where
the function pointer points to a function descriptor (which in
turn contains the actual pointer to the code). The '%pF/%pf, when
used appropriately, automatically does the appropriate function
descriptor dereference on such architectures.
The "when used appropriately" part is tricky. Basically this is
a subtle ABI detail, specific to some platforms, that made it to
the API level and people can be unaware of it and miss the whole
"we need to dereference the function" business out. [1] proves
that point (note that it fixes only '%pF' and '%pS', there might
be '%pf' and '%ps' cases as well).
It appears that we can handle everything within the affected
arches and make '%pS/%ps' smart enough to retire '%pF/%pf'.
Function descriptors live in .opd elf section and all affected
arches (ia64, ppc64, parisc64) handle it properly for kernel
and modules. So we, technically, can decide if the dereference
is needed by simply looking at the pointer: if it belongs to
.opd section then we need to dereference it.
The kernel and modules have their own .opd sections, obviously,
that's why we need to split dereference_function_descriptor()
and use separate kernel and module dereference arch callbacks.
This patch does the first step, it
a) adds dereference_kernel_function_descriptor() function.
b) adds a weak alias to dereference_module_function_descriptor()
function.
So, for the time being, we will have:
1) dereference_function_descriptor()
A generic function, that simply dereferences the pointer. There is
bunch of places that call it: kgdbts, init/main.c, extable, etc.
2) dereference_kernel_function_descriptor()
A function to call on kernel symbols that does kernel .opd section
address range test.
3) dereference_module_function_descriptor()
A function to call on modules' symbols that does modules' .opd
section address range test.
[1] https://marc.info/?l=linux-kernel&m=150472969730573
Link: http://lkml.kernel.org/r/20171109234830.5067-2-sergey.senozhatsky@gmail.com
To: Fenghua Yu <fenghua.yu@intel.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Paul Mackerras <paulus@samba.org>
To: Michael Ellerman <mpe@ellerman.id.au>
To: James Bottomley <jejb@parisc-linux.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-ia64@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Tony Luck <tony.luck@intel.com> #ia64
Tested-by: Santosh Sivaraj <santosh@fossix.org> #powerpc
Tested-by: Helge Deller <deller@gmx.de> #parisc64
Signed-off-by: Petr Mladek <pmladek@suse.com>
Using BPF we can override kprob'ed functions and return arbitrary
values. Obviously this can be a bit unsafe, so make this feature opt-in
for functions. Simply tag a function with KPROBE_ERROR_INJECT_SYMBOL in
order to give BPF access to that function for error injection purposes.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A static variable sig_enforce is used as status var to indicate the real
value of CONFIG_MODULE_SIG_FORCE, once this one is set the var will hold
true, but if the CONFIG is not set the status var will hold whatever
value is present in the module.sig_enforce kernel cmdline param: true
when =1 and false when =0 or not present.
Considering this cmdline param take place over the CONFIG value when
it's not set, other places in the kernel could misbehave since they
would have only the CONFIG_MODULE_SIG_FORCE value to rely on. Exporting
this status var allows the kernel to rely in the effective value of
module signature enforcement, being it from CONFIG value or cmdline
param.
Signed-off-by: Bruno E. O. Meneguele <brdeoliv@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
MODULE_DEVICE_TABLE(type, name) creates an alias of type 'extern const
typeof(name)'. If 'name' is already constant the 'const' attribute is
specified twice, which is not allowed in C89 (see discussion at
https://lkml.org/lkml/2017/5/23/1440). Since the kernel is built with
-std=gnu89 clang generates warnings like this:
drivers/thermal/x86_pkg_temp_thermal.c:509:1: warning: duplicate 'const'
declaration specifier
[-Wduplicate-decl-specifier]
MODULE_DEVICE_TABLE(x86cpu, pkg_temp_thermal_ids);
^
./include/linux/module.h:212:8: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern const typeof(name) __mod_##type##__##name##_device_table
Remove the const attribute from the alias to avoid the duplicate
specifier. After all it is only an alias and the attribute shouldn't
have any effect.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Pull structure randomization updates from Kees Cook:
"Now that IPC and other changes have landed, enable manual markings for
randstruct plugin, including the task_struct.
This is the rest of what was staged in -next for the gcc-plugins, and
comes in three patches, largest first:
- mark "easy" structs with __randomize_layout
- mark task_struct with an optional anonymous struct to isolate the
__randomize_layout section
- mark structs to opt _out_ of automated marking (which will come
later)
And, FWIW, this continues to pass allmodconfig (normal and patched to
enable gcc-plugins) builds of x86_64, i386, arm64, arm, powerpc, and
s390 for me"
* tag 'gcc-plugins-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randstruct: opt-out externally exposed function pointer structs
task_struct: Allow randomized layout
randstruct: Mark various structs for randomization
This marks many critical kernel structures for randomization. These are
structures that have been targeted in the past in security exploits, or
contain functions pointers, pointers to function pointer tables, lists,
workqueues, ref-counters, credentials, permissions, or are otherwise
sensitive. This initial list was extracted from Brad Spengler/PaX Team's
code in the last public patch of grsecurity/PaX based on my understanding
of the code. Changes or omissions from the original code are mine and
don't reflect the original grsecurity/PaX code.
Left out of this list is task_struct, which requires special handling
and will be covered in a subsequent patch.
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull modules updates from Jessica Yu:
- Minor code cleanups
- Fix section alignment for .init_array
* tag 'modules-for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
kallsyms: Use bounded strnchr() when parsing string
module: Unify the return value type of try_module_get
module: set .init_array alignment to 8
The prototypes of try_module_get are different with different macro.
When enable module and module unload, it returns bool, but others not.
Make the return type for try_module_get consistent across all module
config options.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
[jeyu: slightly amended changelog to make it clearer]
Signed-off-by: Jessica Yu <jeyu@redhat.com>
If a PER_CPU struct which contains a spin_lock is statically initialized
via:
DEFINE_PER_CPU(struct foo, bla) = {
.lock = __SPIN_LOCK_UNLOCKED(bla.lock)
};
then lockdep assigns a seperate key to each lock because the logic for
assigning a key to statically initialized locks is to use the address as
the key. With per CPU locks the address is obvioulsy different on each CPU.
That's wrong, because all locks should have the same key.
To solve this the following modifications are required:
1) Extend the is_kernel/module_percpu_addr() functions to hand back the
canonical address of the per CPU address, i.e. the per CPU address
minus the per CPU offset.
2) Check the lock address with these functions and if the per CPU check
matches use the returned canonical address as the lock key, so all per
CPU locks have the same key.
3) Move the static_obj(key) check into look_up_lock_class() so this check
can be avoided for statically initialized per CPU locks. That's
required because the canonical address fails the static_obj(key) check
for obvious reasons.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ Merged Dan's fixups for !MODULES and !SMP into this patch. ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull modules updates from Jessica Yu:
"Summary of modules changes for the 4.11 merge window:
- A few small code cleanups
- Add modules git tree url to MAINTAINERS"
* tag 'modules-for-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
MAINTAINERS: add tree for modules
module: fix memory leak on early load_module() failures
module: Optimize search_module_extables()
modules: mark __inittest/__exittest as __maybe_unused
livepatch/module: print notice of TAINT_LIVEPATCH
module: Drop redundant declaration of struct module
Pull rodata updates from Kees Cook:
"This renames the (now inaccurate) DEBUG_RODATA and related
SET_MODULE_RONX configs to the more sensible STRICT_KERNEL_RWX and
STRICT_MODULE_RWX"
* tag 'rodata-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX
arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common
Pull exception table module split from Paul Gortmaker:
"Final extable.h related changes.
This completes the separation of exception table content from the
module.h header file. This is achieved with the final commit that
removes the one line back compatible change that sourced extable.h
into the module.h file.
The commits are unchanged since January, with the exception of a
couple Acks that came in for the last two commits a bit later. The
changes have been in linux-next for quite some time[1] and have got
widespread arch coverage via toolchains I have and also from
additional ones the kbuild bot has.
Maintaners of the various arch were Cc'd during the postings to
lkml[2] and informed that the intention was to take the remaining arch
specific changes and lump them together with the final two non-arch
specific changes and submit for this merge window.
The ia64 diffstat stands out and probably warrants a mention. In an
earlier review, Al Viro made a valid comment that the original header
separation of content left something to be desired, and that it get
fixed as a part of this change, hence the larger diffstat"
* tag 'extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (21 commits)
module.h: remove extable.h include now users have migrated
core: migrate exception table users off module.h and onto extable.h
cris: migrate exception table users off module.h and onto extable.h
hexagon: migrate exception table users off module.h and onto extable.h
microblaze: migrate exception table users off module.h and onto extable.h
unicore32: migrate exception table users off module.h and onto extable.h
score: migrate exception table users off module.h and onto extable.h
metag: migrate exception table users off module.h and onto extable.h
arc: migrate exception table users off module.h and onto extable.h
nios2: migrate exception table users off module.h and onto extable.h
sparc: migrate exception table users onto extable.h
openrisc: migrate exception table users off module.h and onto extable.h
frv: migrate exception table users off module.h and onto extable.h
sh: migrate exception table users off module.h and onto extable.h
xtensa: migrate exception table users off module.h and onto extable.h
mn10300: migrate exception table users off module.h and onto extable.h
alpha: migrate exception table users off module.h and onto extable.h
arm: migrate exception table users off module.h and onto extable.h
m32r: migrate exception table users off module.h and onto extable.h
ia64: ensure exception table search users include extable.h
...
Both of these options are poorly named. The features they provide are
necessary for system security and should not be considered debug only.
Change the names to CONFIG_STRICT_KERNEL_RWX and
CONFIG_STRICT_MODULE_RWX to better describe what these options do.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Jessica Yu <jeyu@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
clang warns about unused inline functions by default:
arch/arm/crypto/aes-cipher-glue.c:68:1: warning: unused function '__inittest' [-Wunused-function]
arch/arm/crypto/aes-cipher-glue.c:69:1: warning: unused function '__exittest' [-Wunused-function]
As these appear in every single module, let's just disable the warnings by marking the
two functions as __maybe_unused.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jessica Yu <jeyu@redhat.com>
The modversion symbol CRCs are emitted as ELF symbols, which allows us
to easily populate the kcrctab sections by relying on the linker to
associate each kcrctab slot with the correct value.
This has a couple of downsides:
- Given that the CRCs are treated as memory addresses, we waste 4 bytes
for each CRC on 64 bit architectures,
- On architectures that support runtime relocation, a R_<arch>_RELATIVE
relocation entry is emitted for each CRC value, which identifies it
as a quantity that requires fixing up based on the actual runtime
load offset of the kernel. This results in corrupted CRCs unless we
explicitly undo the fixup (and this is currently being handled in the
core module code)
- Such runtime relocation entries take up 24 bytes of __init space
each, resulting in a x8 overhead in [uncompressed] kernel size for
CRCs.
Switching to explicit 32 bit values on 64 bit architectures fixes most
of these issues, given that 32 bit values are not treated as quantities
that require fixing up based on the actual runtime load offset. Note
that on some ELF64 architectures [such as PPC64], these 32-bit values
are still emitted as [absolute] runtime relocatable quantities, even if
the value resolves to a build time constant. Since relative relocations
are always resolved at build time, this patch enables MODULE_REL_CRCS on
powerpc when CONFIG_RELOCATABLE=y, which turns the absolute CRC
references into relative references into .rodata where the actual CRC
value is stored.
So redefine all CRC fields and variables as u32, and redefine the
__CRC_SYMBOL() macro for 64 bit builds to emit the CRC reference using
inline assembler (which is necessary since 64-bit C code cannot use
32-bit types to hold memory addresses, even if they are ultimately
resolved using values that do not exceed 0xffffffff). To avoid
potential problems with legacy 32-bit architectures using legacy
toolchains, the equivalent C definition of the kcrctab entry is retained
for 32-bit architectures.
Note that this mostly reverts commit d4703aefdb ("module: handle ppc64
relocating kcrctabs when CONFIG_RELOCATABLE=y")
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Struct module is already declared at the beginning of the file, no
need to declare it again.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 93c2e105f6 ("module: Optimize __module_address() using a latched RB-tree")
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jessica Yu <jeyu@redhat.com>
The commit 66cc69e34e ("Fix: module signature vs tracepoints:
add new TAINT_UNSIGNED_MODULE") updated module_taint_flags() to
potentially print one more character. But it did not increase the
size of the corresponding buffers in m_show() and print_modules().
We have recently done the same mistake when adding a taint flag
for livepatching, see
https://lkml.kernel.org/r/cfba2c823bb984690b73572aaae1db596b54a082.1472137475.git.jpoimboe@redhat.com
Also struct module uses an incompatible type for mod-taints flags.
It survived from the commit 2bc2d61a96 ("[PATCH] list module
taint flags in Oops/panic"). There was used "int" for the global taint
flags at these times. But only the global tain flags was later changed
to "unsigned long" by the commit 25ddbb18aa ("Make the taint
flags reliable").
This patch defines TAINT_FLAGS_COUNT that can be used to create
arrays and buffers of the right size. Note that we could not use
enum because the taint flag indexes are used also in assembly code.
Then it reworks the table that describes the taint flags. The TAINT_*
numbers can be used as the index. Instead, we add information
if the taint flag is also shown per-module.
Finally, it uses "unsigned long", bit operations, and the updated
taint_flags table also for mod->taints.
It is not optimal because only few taint flags can be printed by
module_taint_flags(). But better be on the safe side. IMHO, it is
not worth the optimization and this is a good compromise.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: http://lkml.kernel.org/r/1474458442-21581-1-git-send-email-pmladek@suse.com
[jeyu@redhat.com: fix broken lkml link in changelog]
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Add ro_after_init support for modules by adding a new page-aligned section
in the module layout (after rodata) for ro_after_init data and enabling RO
protection for that section after module init runs.
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Andi Kleen
Masami Hiramatsu
Sergey Senozhatsky
Josef Bacik
Bruno E. O. Meneguele
Matthias Kaehlcke
Linus Torvalds
Kees Cook
Jeremy Linton
Gao Feng
Thomas Gleixner
Paul Gortmaker
Laura Abbott
Arnd Bergmann
Ard Biesheuvel
Jean Delvare
Anson Jacob
Petr Mladek
Jessica Yu