During diag self-tests we introduce long wait in the mptcp test
program to give the script enough time to access the sockets
dump.
Such wait is introduced after shutting down one sockets end. Since
commit 43b54c6ee3 ("mptcp: Use full MPTCP-level disconnect state
machine") if both sides shutdown the socket is correctly transitioned
into CLOSED status.
As a side effect some sockets are not dumped via the diag interface,
because the socket state (CLOSED) does not match the default filter, and
this cause self-tests instability.
Address the issue moving the above mentioned wait before shutting
down the socket.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/68
Fixes: df62f2ec3d ("selftests/mptcp: add diag interface tests")
Tested-and-acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit df62f2ec3d ("selftests/mptcp: add diag interface tests")
the MPTCP selftests relies on the MPTCP diag interface which is
enabled by a specific kconfig knob: be sure to include it.
Fixes: df62f2ec3d ("selftests/mptcp: add diag interface tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The msg_zerocopy test pins the sender and receiver threads to separate
cores to reduce variance between runs.
But it hardcodes the cores and skips core 0, so it fails on machines
with the selected cores offline, or simply fewer cores.
The test mainly gives code coverage in automated runs. The throughput
of zerocopy ('-z') and non-zerocopy runs is logged for manual
inspection.
Continue even when sched_setaffinity fails. Just log to warn anyone
interpreting the data.
Fixes: 07b65c5b31 ("test: add msg_zerocopy test")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kci_test_encap() is actually composed by two different sub-tests,
kci_test_encap_vxlan() and kci_test_encap_fou()
Therefore we should check the test result of these two in
kci_test_encap() to let the script be aware of the pass / fail status.
Otherwise it will generate false-negative result like below:
$ sudo ./test.sh
PASS: policy routing
PASS: route get
PASS: preferred_lft addresses have expired
PASS: promote_secondaries complete
PASS: tc htb hierarchy
PASS: gre tunnel endpoint
PASS: gretap
PASS: ip6gretap
PASS: erspan
PASS: ip6erspan
PASS: bridge setup
PASS: ipv6 addrlabel
PASS: set ifalias 5b193daf-0a08-46d7-af2c-e7aadd422ded for test-dummy0
PASS: vrf
PASS: vxlan
FAIL: can't add fou port 7777, skipping test
PASS: macsec
PASS: bridge fdb get
PASS: neigh get
$ echo $?
0
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The return value "ret" will be reset to 0 from the beginning of each
sub-test in rtnetlink.sh, therefore this test will always pass if the
last sub-test has passed:
$ sudo ./rtnetlink.sh
PASS: policy routing
PASS: route get
PASS: preferred_lft addresses have expired
PASS: promote_secondaries complete
PASS: tc htb hierarchy
PASS: gre tunnel endpoint
PASS: gretap
PASS: ip6gretap
PASS: erspan
PASS: ip6erspan
PASS: bridge setup
PASS: ipv6 addrlabel
PASS: set ifalias a39ee707-e36b-41d3-802f-63179ed4d580 for test-dummy0
PASS: vrf
PASS: vxlan
FAIL: can't add fou port 7777, skipping test
PASS: macsec
PASS: ipsec
3,7c3,7
< sa[0] spi=0x00000009 proto=0x32 salt=0x64636261 crypt=1
< sa[0] key=0x31323334 35363738 39303132 33343536
< sa[1] rx ipaddr=0x00000000 00000000 00000000 c0a87b03
< sa[1] spi=0x00000009 proto=0x32 salt=0x64636261 crypt=1
< sa[1] key=0x31323334 35363738 39303132 33343536
---
> sa[0] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
> sa[0] key=0x34333231 38373635 32313039 36353433
> sa[1] rx ipaddr=0x00000000 00000000 00000000 037ba8c0
> sa[1] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
> sa[1] key=0x34333231 38373635 32313039 36353433
FAIL: ipsec_offload incorrect driver data
FAIL: ipsec_offload
PASS: bridge fdb get
PASS: neigh get
$ echo $?
0
Make "ret" become a local variable for all sub-tests.
Also, check the sub-test results in kci_test_rtnl() and return the
final result for this test.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new tests check that IP and IPv6 packets exceeding the local PMTU
estimate, forwarded by an Open vSwitch instance from another node,
result in the correct route exceptions being created, and that
communication with end-to-end fragmentation, over GENEVE and VXLAN
Open vSwitch ports, is now possible as a result of PMTU discovery.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new tests check that IP and IPv6 packets exceeding the local PMTU
estimate, both locally generated and forwarded by a bridge from
another node, result in the correct route exceptions being created,
and that communication with end-to-end fragmentation over VXLAN and
GENEVE tunnels is now possible as a result of PMTU discovery.
Part of the existing setup functions aren't generic enough to simply
add a namespace and a bridge to the existing routing setup. This
rework is in progress and we can easily shrink this once more generic
topology functions are available.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Also add test cases with MP_JOIN when tcp_syncookies sysctl is 2 (i.e.,
syncookies are always-on).
While at it, also print the test number and add the test number
to the pcap files that can be generated optionally.
This makes it easier to match the pcap to the test case.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
check we can establish connections also when syn cookies are in use.
Check that
MPTcpExtMPCapableSYNRX and MPTcpExtMPCapableACKRX increase for each
MPTCP test.
Check TcpExtSyncookiesSent and TcpExtSyncookiesRecv increase in netns2.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The txtimestamp selftest sets a fixed 500us tolerance. This value was
arrived at experimentally. Some platforms have higher variances. Make
this adjustable by adding the following flag:
-t N: tolerance (usec) for timestamp validation.
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test case check_highest_speed_is_chosen() configures $h1 to
advertise a subset of its supported speeds and checks that $h2 chooses
the highest speed from the subset.
To find the common advertised speeds between $h1 and $h2,
common_speeds_get() is called.
Currently, the first speed returned from common_speeds_get() is removed
claiming "h1 does not advertise this speed". The claim is wrong because
the function is called after $h1 already advertised a subset of speeds.
In case $h1 supports only two speeds, it will advertise a single speed
which will be later removed because of previously mentioned bug. This
results in the test needlessly failing. When more than two speeds are
supported this is not an issue because the first advertised speed
is the lowest one.
Fix this by not removing any speed from the list of commonly advertised
speeds.
Fixes: 64916b57c0 ("selftests: forwarding: Add speed and auto-negotiation test")
Reported-by: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When size_t maps to unsigned int (e.g. on 32-bit powerpc), then the
comparison with 1<<35 is always true. Clang 9 threw:
warning: result of comparison of constant 34359738368 with \
expression of type 'size_t' (aka 'unsigned int') is always true \
[-Wtautological-constant-out-of-range-compare]
while (total < FILE_SZ) {
Tested: make -C tools/testing/selftests TARGETS="net" run_tests
Fixes: 192dc405f3 ("selftests: net: add tcp_mmap program")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On powerpcle, int64_t maps to long long. Clang 9 threw:
warning: absolute value function 'labs' given an argument of type \
'long long' but has parameter of type 'long' which may cause \
truncation of value [-Wabsolute-value]
if (labs(tstop - texpect) > cfg_variance_us)
Tested: make -C tools/testing/selftests TARGETS="net" run_tests
Fixes: af5136f950 ("selftests/net: SO_TXTIME with ETF and FQ")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clang 9 threw:
warning: format specifies type 'unsigned short' but the argument has \
type 'int' [-Wformat]
typeflags, PORT_BASE, PORT_BASE + port_off);
Tested: make -C tools/testing/selftests TARGETS="net" run_tests
Fixes: 77f65ebdca ("packet: packet fanout rollover during socket overload")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The signedness of char is implementation-dependent. Some systems
(including PowerPC and ARM) use unsigned char. Clang 9 threw:
warning: result of comparison of constant -1 with expression of type \
'char' is always true [-Wtautological-constant-out-of-range-compare]
&arg_index)) != -1) {
Tested: make -C tools/testing/selftests TARGETS="net" run_tests
Fixes: 16e7812241 ("selftests/net: Add a test to validate behavior of rx timestamps")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy reported compile failure when CONFIG_SYSCTL is not set/enabled:
ERROR: modpost: "sysctl_vals" [drivers/net/vrf.ko] undefined!
Fix by splitting out the sysctl init and cleanup into helpers that
can be set to do nothing when CONFIG_SYSCTL is disabled. In addition,
move vrf_strict_mode and vrf_strict_mode_change to above
vrf_shared_table_handler (code move only) and wrap all of it
in the ifdef CONFIG_SYSCTL.
Update the strict mode tests to check for the existence of the
/proc/sys entry.
Fixes: 33306f1aaf ("vrf: add sysctl parameter for strict mode")
Cc: Andrea Mayer <andrea.mayer@uniroma2.it>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
According to 'man 8 ip-netns', if `ip netns identify` returns an empty string,
there's no net namespace associated with current PID: fix the net ns entrance
logic.
Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that policers shared by different tc filters are correctly
reference counted by observing policers' occupancy via devlink-resource.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test tc-police action in various scenarios such as Rx policing, Tx
policing, shared policer and police piped to mirred. The test passes
with both veth pairs and loopbacked ports.
# ./tc_police.sh
TEST: police on rx [ OK ]
TEST: police on tx [ OK ]
TEST: police with shared policer - rx [ OK ]
TEST: police with shared policer - tx [ OK ]
TEST: police rx and mirror [ OK ]
TEST: police tx and mirror [ OK ]
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During setup():
...
for ns in h0 r1 h1 h2 h3
do
create_ns ${ns}
done
...
while in cleanup():
...
for n in h1 r1 h2 h3 h4
do
ip netns del ${n} 2>/dev/null
done
...
and after removing the stderr redirection in cleanup():
$ sudo ./fib_nexthop_multiprefix.sh
...
TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ]
TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ]
Cannot remove namespace file "/run/netns/h4": No such file or directory
$ echo $?
1
and a non-zero return code, make kselftests fail (even if the test
itself is fine):
...
not ok 34 selftests: net: fib_nexthop_multiprefix.sh # exit=1
...
Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test port split configuration using previously added number of port lanes
attribute.
Check that all the splittable ports are successfully split to their maximum
number of lanes and below, and that those which are not splittable fail to
be split.
Test output example:
TEST: swp4 is unsplittable [ OK ]
TEST: split port swp53 into 4 [ OK ]
TEST: Unsplit port pci/0000:03:00.0/25 [ OK ]
TEST: split port swp53 into 2 [ OK ]
TEST: Unsplit port pci/0000:03:00.0/25 [ OK ]
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
