We now use 64-bit time_t on all architectures, so the __kernel_timex,
__kernel_timeval and __kernel_timespec redirects can be removed
after having served their purpose.
This makes it all much less confusing, as the __kernel_* types
now always refer to the same layout based on 64-bit time_t across
all 32-bit and 64-bit architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
struct timex is not y2038 safe.
Replace all uses of timex with y2038 safe __kernel_timex.
Note that struct __kernel_timex is an ABI interface definition.
We could define a new structure based on __kernel_timex that
is only available internally instead. Right now, there isn't
a strong motivation for this as the structure is isolated to
a few defined struct timex interfaces and such a structure would
be exactly the same as struct timex.
The patch was generated by the following coccinelle script:
virtual patch
@depends on patch forall@
identifier ts;
expression e;
@@
(
- struct timex ts;
+ struct __kernel_timex ts;
|
- struct timex ts = {};
+ struct __kernel_timex ts = {};
|
- struct timex ts = e;
+ struct __kernel_timex ts = e;
|
- struct timex *ts;
+ struct __kernel_timex *ts;
|
(memset \| copy_from_user \| copy_to_user \)(...,
- sizeof(struct timex))
+ sizeof(struct __kernel_timex))
)
@depends on patch forall@
identifier ts;
identifier fn;
@@
fn(...,
- struct timex *ts,
+ struct __kernel_timex *ts,
...) {
...
}
@depends on patch forall@
identifier ts;
identifier fn;
@@
fn(...,
- struct timex *ts) {
+ struct __kernel_timex *ts) {
...
}
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: linux-alpha@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
sparc64 is the only architecture on Linux that has a 'timeval'
definition with a 32-bit tv_usec but a 64-bit tv_sec. This causes
problems for sparc32 compat mode when we convert it to use the
new __kernel_timex type that has the same layout as all other
64-bit architectures.
To avoid adding sparc64 specific code into the generic adjtimex
implementation, this adds a wrapper in the sparc64 system call handling
that converts the sparc64 'timex' into the new '__kernel_timex'.
At this point, the two structures are defined to be identical,
but that will change in the next step once we convert sparc32.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
struct timex uses struct timeval internally.
struct timeval is not y2038 safe.
Introduce a new UAPI type struct __kernel_timex
that is y2038 safe.
struct __kernel_timex uses a timeval type that is
similar to struct __kernel_timespec which preserves the
same structure size across 32 bit and 64 bit ABIs.
struct __kernel_timex also restructures other members of the
structure to make the structure the same on 64 bit and 32 bit
architectures.
Note that struct __kernel_timex is the same as struct timex
on a 64 bit architecture.
The above solution is similar to other new y2038 syscalls
that are being introduced: both 32 bit and 64 bit ABIs
have a common entry, and the compat entry supports the old 32 bit
syscall interface.
Alternatives considered were:
1. Add new time type to struct timex that makes use of padded
bits. This time type could be based on the struct __kernel_timespec.
modes will use a flag to notify which time structure should be
used internally.
This needs some application level changes on both 64 bit and 32 bit
architectures. Although 64 bit machines could continue to use the
older timeval structure without any changes.
2. Add a new u8 type to struct timex that makes use of padded bits. This
can be used to save higher order tv_sec bits. modes will use a flag to
notify presence of such a type.
This will need some application level changes on 32 bit architectures.
3. Add a new compat_timex structure that differs in only the size of the
time type; keep rest of struct timex the same.
This requires extra syscalls to manage all 3 cases on 64 bit
architectures. This will not need any application level changes but will
add more complexity from kernel side.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is only one user of the hardpps function in the kernel, so
it makes sense to atomically change it over to using 64-bit
timestamps for y2038 safety. In the hardpps implementation,
we also need to change the pps_normtime structure, which is
similar to struct timespec and also requires a 64-bit
seconds portion.
This introduces two temporary variables in pps_kc_event() to
do the conversion, they will be removed again in the next step,
which seemed preferable to having a larger patch changing it
all at the same time.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Pull /dev/random changes from Ted Ts'o:
"These patches are designed to enable improvements to /dev/random for
non-x86 platforms, in particular MIPS and ARM"
* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: allow architectures to optionally define random_get_entropy()
random: run random_int_secret_init() run after all late_initcalls
Allow architectures which have a disabled get_cycles() function to
provide a random_get_entropy() function which provides a fine-grained,
rapidly changing counter that can be used by the /dev/random driver.
For example, an architecture might have a rapidly changing register
used to control random TLB cache eviction, or DRAM refresh that
doesn't meet the requirements of get_cycles(), but which is good
enough for the needs of the random driver.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Gerlando Falauto reported that when HRTICK is enabled, it is
possible to trigger system deadlocks. These were hard to
reproduce, as HRTICK has been broken in the past, but seemed
to be connected to the timekeeping_seq lock.
Since seqlock/seqcount's aren't supported w/ lockdep, I added
some extra spinlock based locking and triggered the following
lockdep output:
[ 15.849182] ntpd/4062 is trying to acquire lock:
[ 15.849765] (&(&pool->lock)->rlock){..-...}, at: [<ffffffff810aa9b5>] __queue_work+0x145/0x480
[ 15.850051]
[ 15.850051] but task is already holding lock:
[ 15.850051] (timekeeper_lock){-.-.-.}, at: [<ffffffff810df6df>] do_adjtimex+0x7f/0x100
<snip>
[ 15.850051] Chain exists of: &(&pool->lock)->rlock --> &p->pi_lock --> timekeeper_lock
[ 15.850051] Possible unsafe locking scenario:
[ 15.850051]
[ 15.850051] CPU0 CPU1
[ 15.850051] ---- ----
[ 15.850051] lock(timekeeper_lock);
[ 15.850051] lock(&p->pi_lock);
[ 15.850051] lock(timekeeper_lock);
[ 15.850051] lock(&(&pool->lock)->rlock);
[ 15.850051]
[ 15.850051] *** DEADLOCK ***
The deadlock was introduced by 06c017fdd4 ("timekeeping:
Hold timekeepering locks in do_adjtimex and hardpps") in 3.10
This patch avoids this deadlock, by moving the call to
schedule_delayed_work() outside of the timekeeper lock
critical section.
Reported-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Tested-by: Lin Ming <minggr@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable <stable@vger.kernel.org> #3.11, 3.10
Link: http://lkml.kernel.org/r/1378943457-27314-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation for changing the ntp locking rules, move
do_adjtimex and hardpps accessor functions to timekeeping.c,
but keep the code logic in ntp.c.
This patch also introduces a ntp_internal.h file so timekeeping
specific interfaces of ntp.c can be more limitedly shared with
timekeeping.c.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Since commit 7dffa3c673 the ntp
subsystem has used an hrtimer for triggering the leapsecond
adjustment. However, this can cause a potential livelock.
Thomas diagnosed this as the following pattern:
CPU 0 CPU 1
do_adjtimex()
spin_lock_irq(&ntp_lock);
process_adjtimex_modes(); timer_interrupt()
process_adj_status(); do_timer()
ntp_start_leap_timer(); write_lock(&xtime_lock);
hrtimer_start(); update_wall_time();
hrtimer_reprogram(); ntp_tick_length()
tick_program_event() spin_lock(&ntp_lock);
clockevents_program_event()
ktime_get()
seq = req_seqbegin(xtime_lock);
This patch tries to avoid the problem by reverting back to not using
an hrtimer to inject leapseconds, and instead we handle the leapsecond
processing in the second_overflow() function.
The downside to this change is that on systems that support highres
timers, the leap second processing will occur on a HZ tick boundary,
(ie: ~1-10ms, depending on HZ) after the leap second instead of
possibly sooner (~34us in my tests w/ x86_64 lapic).
This patch applies on top of tip/timers/core.
CC: Sasha Levin <levinsasha928@gmail.com>
CC: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Diagnoised-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Currently the NTP managed tick_length value is accessed globally,
in preparations for locking cleanups, make sure it is accessed via
a function and mark it as static.
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
This commit adds hardpps() implementation based upon the original one from
the NTPv4 reference kernel code from David Mills. However, it is highly
optimized towards very fast syncronization and maximum stickness to PPS
signal. The typical error is less then a microsecond.
To make it sync faster I had to throw away exponential phase filter so
that the full phase offset is corrected immediately. Then I also had to
throw away median phase filter because it gives a bigger error itself if
used without exponential filter.
Maybe we will find an appropriate filtering scheme in the future but it's
not necessary if the signal quality is ok.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'timers-for-linus-ntp' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
ntp: Provide compability defines (You say MOD_NANO, I say ADJ_NANO)
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: do not execute DEBUG_SHIRQ when irq setup failed
Accumulating one tick at a time works well unless we're using NOHZ.
Then it can be an issue, since we may have to run through the loop
a few thousand times, which can increase timer interrupt caused
latency.
The current solution was to accumulate in half-second intervals
with NOHZ. This kept the number of loops down, however it did
slightly change how we make NTP adjustments. While not an issue
with NTPd users, as NTPd makes adjustments over a longer period of
time, other adjtimex() users have noticed the half-second
granularity with which we can apply frequency changes to the clock.
For instance, if a application tries to apply a 100ppm frequency
correction for 20ms to correct a 2us offset, with NOHZ they either
get no correction, or a 50us correction.
Now, there will always be some granularity error for applying
frequency corrections. However with users sensitive to this error
have seen a 50-500x increase with NOHZ compared to running without
NOHZ.
So I figured I'd try another approach then just simply increasing
the interval. My approach is to consume the time interval
logarithmically. This reduces the number of times through the loop
needed keeping latency down, while still preserving the original
granularity error for adjtimex() changes.
Further, this change allows us to remove the xtime_cache code
(patch to follow), as xtime is always within one tick of the
current time, instead of the half-second updates it saw before.
An earlier version of this patch has been shipping to x86 users in
the RedHat MRG releases for awhile without issue, but I've reworked
this version to be even more careful about avoiding possible
overflows if the shift value gets too large.
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <1254525473.7741.88.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
MOD_NANO, ADJ_NANO, MOD_NANO, ADJ_NANO!
Lets call the whole thing off!
But oh! If we call the whole thing off,
Then we must part.
And oh! If we ever part,
Then that might break my heart^H^H^H^Hclock!
So, if you like MOD_NANO and I like ADJ_NANO,
I'll include MOD_NANO and give up ADJ_NANO (not really!).
For we know we need each other,
So we better call the calling off off.
Let's call the whole thing off!
The tumultuous NTP and Linux relationship has hit another snag: Ends
up NTPd still uses the "xntp 3.4 compatability names" and when the
STA_NANO value was added (along with ADJ_NANO), NTPd expected MOD_NANO
to be added and has apparently hit some build errors.
Report to ntp hackers:
https://lists.ntp.org/pipermail/hackers/2009-August/004455.html
Related Bugs:
https://support.ntp.org/bugs/show_bug.cgi?id=1219https://bugzilla.redhat.com/show_bug.cgi?id=505566
So in an effort to make peace, here's a patch to help get things
building again. I also have updated the comment to make sure folks
don't think the MOD_* values are just legacy constants.
Of course, NTPd really uses the glibc-headers, so those will need to
be similarly updated before things are working again (the RH bug above
should probably cover that).
Thanks to Michael Tatarinov and Hal Murray for finding and reporting
the issue!
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: hmurray@megapathdsl.net
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Michael Tatarinov <kukabu@gmail.com>
LKML-Reference: <1251417882.7905.42.camel@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
PIT_TICK_RATE is currently defined in four architectures, but in three
different places. While linux/timex.h is not the perfect place for it, it
is still a reasonable replacement for those drivers that traditionally use
asm/timex.h to get CLOCK_TICK_RATE and expect it to be the PIT frequency.
Note that for Alpha, the actual value changed from 1193182UL to 1193180UL.
This is unlikely to make a difference, and probably can only improve
accuracy. There was a discussion on the correct value of CLOCK_TICK_RATE
a few years ago, after which every existing instance was getting changed
to 1193182. According to the specification, it should be
1193181.818181...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Len Brown <lenb@kernel.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The conversion to the ntpv4 reference model
f199239373 ("ntp: convert to the NTP4
reference model") in 2.6.19 added nanosecond resolution the adjtimex
interface, but also changed the "stiffness" of the frequency adjustments,
causing NTP convergence time to greatly increase.
SHIFT_PLL, which reduces the stiffness of the freq adjustments, was
designed to be inversely linked to HZ, and the reference value of 4 was
designed for Unix systems using HZ=100. However Linux's clock steering
code mostly independent of HZ.
So this patch reduces the SHIFT_PLL value from 4 to 2, which causes NTPd
behavior to match kernels prior to 2.6.19, greatly reducing convergence
times, and improving close synchronization through environmental thermal
changes.
The patch also changes some l's to L's in nearby code to avoid misreading
50l as 501.
[ Impact: tweak NTP algorithm for faster convergence ]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: zippel@linux-m68k.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <200905051956.n45JuVo9025575@imap1.linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
