Pull ARM driver updates from Arnd Bergmann:
"These are the usual updates for SoC specific device drivers and
related subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
and TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers"
* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
soc: fsl: qe: fix sparse warnings for ucc_slow.c
soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
soc: fsl: qe: fix sparse warnings for ucc_fast.c
soc: fsl: qe: fix sparse warnings for qe_ic.c
soc: fsl: qe: fix sparse warnings for ucc.c
soc: fsl: qe: fix sparse warning for qe_common.c
soc: fsl: qe: fix sparse warnings for qe.c
soc: qcom: Fix QCOM_APR dependencies
soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
firmware: imx: add COMPILE_TEST for IMX_SCU driver
soc: imx: gpc: fix power up sequencing
soc: imx: increase build coverage for imx8m soc driver
soc: qcom: apr: Add avs/audio tracking functionality
dt-bindings: soc: qcom: apr: Add protection domain bindings
soc: qcom: Introduce Protection Domain Restart helpers
devicetree: bindings: firmware: add ipq806x to qcom_scm
memory: tegra: Correct debugfs clk rate-range on Tegra124
memory: tegra: Correct debugfs clk rate-range on Tegra30
memory: tegra: Correct debugfs clk rate-range on Tegra20
...
Qualcomm SoCs (starting with MSM8998) allow for multiple protection domains
to run on the same Q6 sub-system. This allows for services like ATH10K WLAN
FW to have their own separate address space and crash/recover without
disrupting the modem and other PDs running on the same sub-system. The PDR
helpers introduces an abstraction that allows for tracking/controlling the
life cycle of protection domains running on various Q6 sub-systems.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200312120842.21991-2-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Pull ARM SoC driver updates from Olof Johansson:
"Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
soc: fsl: add RCPM driver
dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
memory: tegra: Consolidate registers definition into common header
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Introduce Tegra30 EMC driver
memory: tegra: Do not handle error from wait_for_completion_timeout()
memory: tegra: Increase handshake timeout on Tegra20
memory: tegra: Print a brief info message about EMC timings
memory: tegra: Pre-configure debug register on Tegra20
memory: tegra: Include io.h instead of iopoll.h
memory: tegra: Adapt for Tegra20 clock driver changes
memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
memory: tegra: Add gr2d and gr3d to DRM IOMMU group
memory: tegra: Set DMA mask based on supported address bits
soc: at91: Add Atmel SFR SN (Serial Number) support
memory: atmel-ebi: switch to SPDX license identifiers
memory: atmel-ebi: move NUM_CS definition inside EBI driver
soc: mediatek: Refactor bus protection control
soc: mediatek: Refactor sram control
...
Some GPIOs are marked as wakeup capable and are routed to another
interrupt controller that is an always-domain and can detect interrupts
even when most of the SoC is powered off. The wakeup interrupt
controller wakes up the GIC and replays the interrupt at the GIC.
Setup the TLMM irqchip in hierarchy with the wakeup interrupt controller
and ensure the wakeup GPIOs are handled correctly.
Co-developed-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1573855915-9841-9-git-send-email-ilina@codeaurora.org
----
Changes in v2:
- Address review comments
- Fix Co-developed-by tag
Changes in v1:
- Address minor review comments
- Remove redundant call to set irq handler
- Move irq_domain_qcom_handle_wakeup() to this patch
Changes in RFC v2:
- Rebase on top of GPIO hierarchy support in linux-next
- Set the chained irq handler for summary line
commit 99356b03b4 ("soc: qcom: Make llcc-qcom a generic driver") move
these out of llcc-qcom.h, make the building fails:
drivers/edac/qcom_edac.c:86:40: error: array type has incomplete element type struct llcc_edac_reg_data
static const struct llcc_edac_reg_data edac_reg_data[] = {
^~~~~~~~~~~~~
drivers/edac/qcom_edac.c:87:3: error: array index in non-array initializer
[LLCC_DRAM_CE] = {
^~~~~~~~~~~~
drivers/edac/qcom_edac.c:87:3: note: (near initialization for edac_reg_data)
drivers/edac/qcom_edac.c:88:3: error: field name not in record or union initializer
.name = "DRAM Single-bit",
...
drivers/edac/qcom_edac.c:169:51: warning: struct llcc_drv_data declared inside parameter
list will not be visible outside of this definition or declaration
qcom_llcc_clear_error_status(int err_type, struct llcc_drv_data *drv)
^~~~~~~~~~~~~
This patch move the needed definitions back to include.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 99356b03b4 ("soc: qcom: Make llcc-qcom a generic driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This makes way for adding future llcc versions.
Also pull out the llcc-qcom specific definitions from includes.
Includes path now contains the only definitions that are
to be exposed to other subsystems.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
A single file should suffice the need to program the llcc for
various platforms. Get rid of sdm845 specific driver file to
make way for a more generic driver.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In some software releases the firmware images are not split up with each
loadable segment in it's own file. Check the size of the loaded firmware
to see if it still contains each segment to be loaded, before falling
back to the split-out segments.
Acked-by: Andy Gross <agross@kernel.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Currently the data structure for llc-slice is devm allocated and
stored as a global but never cleared if the probe function fails.
This is a problem because devm managed memory gets freed on probe
failure the API functions could access the pointer after it has been
freed.
Initialize the drv_data pointer to an error and reset it to an error
on probe failure or device destroy and add protection to the API
functions to make sure the memory doesn't get accessed.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Txn IDs created up to INT_MAX cause overflow while storing
the IDs in u16 type supported by QMI header.
Limit the txn IDs max value to U16_MAX to avoid overflow.
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add error reporting driver for Single Bit Errors (SBEs) and Double Bit
Errors (DBEs). As of now, this driver supports error reporting for
Last Level Cache Controller (LLCC) of Tag RAM and Data RAM. Interrupts
are triggered when the errors happen in the cache, the driver handles
those interrupts and dumps the syndrome registers.
Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Co-developed-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Cache error reporting controller detects and reports single and
double bit errors on Last Level Cache Controller (LLCC) cache.
Add required support to register LLCC EDAC driver as platform driver,
from LLCC driver.
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Currently, broadcast base is set to end of the LLCC banks, which may
not be correct always. As the number of banks may vary for each chipset
and the broadcast base could be at a different address as well. This info
depends on the chipset, so get the broadcast base info from the device
tree (DT). Add broadcast base in LLCC driver and use this for broadcast
writes.
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Pull remoteproc updates from Bjorn Andersson:
"This adds support for pre-start and post-shutdown hooks for remoteproc
subdevices, refactors the Qualcomm Hexagon support to allow reuse
between several drivers, makes authentication in the MDT file loader
optional, migrates a few format strings to use %pK and migrates the
Davinci driver to use the reset framework"
* tag 'rproc-v4.19' of git://github.com/andersson/remoteproc:
remoteproc/davinci: use the reset framework
remoteproc/davinci: Mark error recovery as disabled
remoteproc: st_slim: replace "%p" with "%pK"
remoteproc: replace "%p" with "%pK"
remoteproc: qcom: fix Q6V5_WCSS dependencies
remoteproc: Reset table_ptr in rproc_start() failure paths
remoteproc: qcom: q6v5-pil: fix modem hang on SDM845 after axis2 clk unvote
remoteproc: qcom q6v5: fix modular build
remoteproc: Introduce prepare and unprepare for subdevices
remoteproc: rename subdev probe and remove functions
remoteproc: Make client initialize ops in rproc_subdev
remoteproc: Make start and stop in subdev optional
remoteproc: Rename subdev functions to start/stop
remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
remoteproc: qcom: q6v5-pil: Use common q6v5 helpers
remoteproc: qcom: adsp: Use common q6v5 helpers
remoteproc: q6v5: Extract common resource handling
remoteproc: qcom: mdt_loader: Make the firmware authentication optional
LLCC (Last Level Cache Controller) provides additional cache memory
in the system. LLCC is partitioned into multiple slices and each
slice gets its own priority, size, ID and other config parameters.
LLCC driver programs these parameters for each slice. Clients that
are assigned to use LLCC need to get information such size & ID of the
slice they get and activate or deactivate the slice as needed. LLCC driver
provides API for the clients to perform these operations.
Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
qcom_mdt_load function loads the mdt type firmware and
initialises the secure memory as well. Make the initialisation only
when requested by the caller, so that the function can be used
by self-authenticating remoteproc as well.
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Pull ARM SoC late updates from Olof Johansson:
"This is a branch with a few merge requests that either came in late,
or took a while longer for us to review and merge than usual and thus
cut it a bit close to the merge window. We stage them in a separate
branch and if things look good, we still send them up -- and that's
the case here.
This is mostly DT additions for Renesas platforms, adding IP block
descriptions for existing and new SoCs.
There are also some driver updates for Qualcomm platforms for SMEM/QMI
and GENI, which is their generalized serial protocol interface"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits)
soc: qcom: smem: introduce qcom_smem_virt_to_phys()
soc: qcom: qmi: fix a buffer sizing bug
MAINTAINERS: Update pattern for qcom_scm
soc: Unconditionally include qcom Makefile
soc: qcom: smem: check sooner in qcom_smem_set_global_partition()
soc: qcom: smem: fix qcom_smem_set_global_partition()
soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private()
soc: qcom: smem: byte swap values properly
soc: qcom: smem: return proper type for cached entry functions
soc: qcom: smem: fix first cache entry calculation
soc: qcom: cmd-db: Make endian-agnostic
drivers: qcom: add command DB driver
arm64: dts: renesas: salvator-common: Add ADV7482 support
ARM: dts: r8a7740: Add CEU1
ARM: dts: r8a7740: Add CEU0
arm64: dts: renesas: salvator-common: enable VIN
arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7795-es1: add CSI-2 node
...
Create function qcom_smem_virt_to_phys(), which returns the physical
address corresponding to a given SMEM item's virtual address. This
feature is required for a driver that will soon be out for review.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support to APR bus (Asynchronous Packet Router) driver.
APR driver is made as a bus driver so that the apr devices can added removed
more dynamically depending on the state of the services on the dsp.
APR is used for communication between application processor and QDSP to
use services on QDSP like Audio and others.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull remoteproc updates from Bjorn Andersson:
- add support for generating coredumps for remoteprocs using
devcoredump
- add the Qualcomm sysmon driver for intra-remoteproc crash handling
- a number of fixes in Qualcomm and IMX drivers
* tag 'rproc-v4.17' of git://github.com/andersson/remoteproc:
remoteproc: fix null pointer dereference on glink only platforms
soc: qcom: qmi: add CONFIG_NET dependency
remoteproc: imx_rproc: Slightly simplify code in 'imx_rproc_probe()'
remoteproc: imx_rproc: Re-use existing error handling path in 'imx_rproc_probe()'
remoteproc: imx_rproc: Fix an error handling path in 'imx_rproc_probe()'
samples: Introduce Qualcomm QMI sample client
remoteproc: qcom: Introduce sysmon
remoteproc: Pass type of shutdown to subdev remove
remoteproc: qcom: Register segments for core dump
soc: qcom: mdt-loader: Return relocation base
remoteproc: Rename "load_rsc_table" to "parse_fw"
remoteproc: Add remote processor coredump support
remoteproc: Remove null character write of shared mem
Add the pm8998 and pmi8998 regulators as used in the MSM8998 platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to implement support for grabbing core dumps in remoteproc it's
necessary to know the relocated base of the image, as the offsets from
the virtual memory base might not be based on the physical address.
Return the adjusted physical base address to the caller.
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
