mirror of
https://github.com/ukui/kernel.git
synced 2026-03-09 10:07:04 -07:00
8a3177db59cd644fde05ba9efee29392dfdec8aa
266 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Feng Tang
|
81c9d43f94 |
kernel/sysctl: add panic_print into sysctl
So that we can also runtime chose to print out the needed system info for panic, other than setting the kernel cmdline. Link: http://lkml.kernel.org/r/1543398842-19295-3-git-send-email-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
 Mel Gorman
|
1c30844d2d |
mm: reclaim small amounts of memory when an external fragmentation event occurs
An external fragmentation event was previously described as
When the page allocator fragments memory, it records the event using
the mm_page_alloc_extfrag event. If the fallback_order is smaller
than a pageblock order (order-9 on 64-bit x86) then it's considered
an event that will cause external fragmentation issues in the future.
The kernel reduces the probability of such events by increasing the
watermark sizes by calling set_recommended_min_free_kbytes early in the
lifetime of the system. This works reasonably well in general but if
there are enough sparsely populated pageblocks then the problem can still
occur as enough memory is free overall and kswapd stays asleep.
This patch introduces a watermark_boost_factor sysctl that allows a zone
watermark to be temporarily boosted when an external fragmentation causing
events occurs. The boosting will stall allocations that would decrease
free memory below the boosted low watermark and kswapd is woken if the
calling context allows to reclaim an amount of memory relative to the size
of the high watermark and the watermark_boost_factor until the boost is
cleared. When kswapd finishes, it wakes kcompactd at the pageblock order
to clean some of the pageblocks that may have been affected by the
fragmentation event. kswapd avoids any writeback, slab shrinkage and swap
from reclaim context during this operation to avoid excessive system
disruption in the name of fragmentation avoidance. Care is taken so that
kswapd will do normal reclaim work if the system is really low on memory.
This was evaluated using the same workloads as "mm, page_alloc: Spread
allocations across zones before introducing fragmentation".
1-socket Skylake machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 1 THP allocating thread
--------------------------------------
4.20-rc3 extfrag events < order 9: 804694
4.20-rc3+patch: 408912 (49% reduction)
4.20-rc3+patch1-4: 18421 (98% reduction)
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Amean fault-base-1 653.58 ( 0.00%) 652.71 ( 0.13%)
Amean fault-huge-1 0.00 ( 0.00%) 178.93 * -99.00%*
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Percentage huge-1 0.00 ( 0.00%) 5.12 ( 100.00%)
Note that external fragmentation causing events are massively reduced by
this path whether in comparison to the previous kernel or the vanilla
kernel. The fault latency for huge pages appears to be increased but that
is only because THP allocations were successful with the patch applied.
1-socket Skylake machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 291392
4.20-rc3+patch: 191187 (34% reduction)
4.20-rc3+patch1-4: 13464 (95% reduction)
thpfioscale Fault Latencies
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Min fault-base-1 912.00 ( 0.00%) 905.00 ( 0.77%)
Min fault-huge-1 127.00 ( 0.00%) 135.00 ( -6.30%)
Amean fault-base-1 1467.55 ( 0.00%) 1481.67 ( -0.96%)
Amean fault-huge-1 1127.11 ( 0.00%) 1063.88 * 5.61%*
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Percentage huge-1 77.64 ( 0.00%) 83.46 ( 7.49%)
As before, massive reduction in external fragmentation events, some jitter
on latencies and an increase in THP allocation success rates.
2-socket Haswell machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 5 THP allocating threads
----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 215698
4.20-rc3+patch: 200210 (7% reduction)
4.20-rc3+patch1-4: 14263 (93% reduction)
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Amean fault-base-5 1346.45 ( 0.00%) 1306.87 ( 2.94%)
Amean fault-huge-5 3418.60 ( 0.00%) 1348.94 ( 60.54%)
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Percentage huge-5 0.78 ( 0.00%) 7.91 ( 910.64%)
There is a 93% reduction in fragmentation causing events, there is a big
reduction in the huge page fault latency and allocation success rate is
higher.
2-socket Haswell machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 166352
4.20-rc3+patch: 147463 (11% reduction)
4.20-rc3+patch1-4: 11095 (93% reduction)
thpfioscale Fault Latencies
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Amean fault-base-5 6217.43 ( 0.00%) 7419.67 * -19.34%*
Amean fault-huge-5 3163.33 ( 0.00%) 3263.80 ( -3.18%)
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Percentage huge-5 95.14 ( 0.00%) 87.98 ( -7.53%)
There is a large reduction in fragmentation events with some jitter around
the latencies and success rates. As before, the high THP allocation
success rate does mean the system is under a lot of pressure. However, as
the fragmentation events are reduced, it would be expected that the
long-term allocation success rate would be higher.
Link: http://lkml.kernel.org/r/20181123114528.28802-5-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
 Linus Torvalds
|
2d6bb6adb7 |
Merge tag 'stackleak-v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull stackleak gcc plugin from Kees Cook:
"Please pull this new GCC plugin, stackleak, for v4.20-rc1. This plugin
was ported from grsecurity by Alexander Popov. It provides efficient
stack content poisoning at syscall exit. This creates a defense
against at least two classes of flaws:
- Uninitialized stack usage. (We continue to work on improving the
compiler to do this in other ways: e.g. unconditional zero init was
proposed to GCC and Clang, and more plugin work has started too).
- Stack content exposure. By greatly reducing the lifetime of valid
stack contents, exposures via either direct read bugs or unknown
cache side-channels become much more difficult to exploit. This
complements the existing buddy and heap poisoning options, but
provides the coverage for stacks.
The x86 hooks are included in this series (which have been reviewed by
Ingo, Dave Hansen, and Thomas Gleixner). The arm64 hooks have already
been merged through the arm64 tree (written by Laura Abbott and
reviewed by Mark Rutland and Will Deacon).
With VLAs having been removed this release, there is no need for
alloca() protection, so it has been removed from the plugin"
* tag 'stackleak-v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: Drop unneeded stackleak_check_alloca()
stackleak: Allow runtime disabling of kernel stack erasing
doc: self-protection: Add information about STACKLEAK feature
fs/proc: Show STACKLEAK metrics in the /proc file system
lkdtm: Add a test for STACKLEAK
gcc-plugins: Add STACKLEAK plugin for tracking the kernel stack
x86/entry: Add STACKLEAK erasing the kernel stack at the end of syscalls
|
||
 Daniel Borkmann
|
ede95a63b5 |
bpf: add bpf_jit_limit knob to restrict unpriv allocations
Rick reported that the BPF JIT could potentially fill the entire module space with BPF programs from unprivileged users which would prevent later attempts to load normal kernel modules or privileged BPF programs, for example. If JIT was enabled but unsuccessful to generate the image, then before commit |
||
 Henrik Austad
|
a7ddcea58a |
Drop all 00-INDEX files from Documentation/
This is a respin with a wider audience (all that get_maintainer returned) and I know this spams a *lot* of people. Not sure what would be the correct way, so my apologies for ruining your inbox. The 00-INDEX files are supposed to give a summary of all files present in a directory, but these files are horribly out of date and their usefulness is brought into question. Often a simple "ls" would reveal the same information as the filenames are generally quite descriptive as a short introduction to what the file covers (it should not surprise anyone what Documentation/sched/sched-design-CFS.txt covers) A few years back it was mentioned that these files were no longer really needed, and they have since then grown further out of date, so perhaps it is time to just throw them out. A short status yields the following _outdated_ 00-INDEX files, first counter is files listed in 00-INDEX but missing in the directory, last is files present but not listed in 00-INDEX. List of outdated 00-INDEX: Documentation: (4/10) Documentation/sysctl: (0/1) Documentation/timers: (1/0) Documentation/blockdev: (3/1) Documentation/w1/slaves: (0/1) Documentation/locking: (0/1) Documentation/devicetree: (0/5) Documentation/power: (1/1) Documentation/powerpc: (0/5) Documentation/arm: (1/0) Documentation/x86: (0/9) Documentation/x86/x86_64: (1/1) Documentation/scsi: (4/4) Documentation/filesystems: (2/9) Documentation/filesystems/nfs: (0/2) Documentation/cgroup-v1: (0/2) Documentation/kbuild: (0/4) Documentation/spi: (1/0) Documentation/virtual/kvm: (1/0) Documentation/scheduler: (0/2) Documentation/fb: (0/1) Documentation/block: (0/1) Documentation/networking: (6/37) Documentation/vm: (1/3) Then there are 364 subdirectories in Documentation/ with several files that are missing 00-INDEX alltogether (and another 120 with a single file and no 00-INDEX). I don't really have an opinion to whether or not we /should/ have 00-INDEX, but the above 00-INDEX should either be removed or be kept up to date. If we should keep the files, I can try to keep them updated, but I rather not if we just want to delete them anyway. As a starting point, remove all index-files and references to 00-INDEX and see where the discussion is going. Signed-off-by: Henrik Austad <henrik@austad.us> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Just-do-it-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: [Almost everybody else] Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
 Alexander Popov
|
964c9dff00 |
stackleak: Allow runtime disabling of kernel stack erasing
Introduce CONFIG_STACKLEAK_RUNTIME_DISABLE option, which provides 'stack_erasing' sysctl. It can be used in runtime to control kernel stack erasing for kernels built with CONFIG_GCC_PLUGIN_STACKLEAK. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Alexander Popov <alex.popov@linux.com> Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org> |
||
 Salvatore Mesoraca
|
30aba6656f |
namei: allow restricted O_CREAT of FIFOs and regular files
Disallows open of FIFOs or regular files not owned by the user in world writable sticky directories, unless the owner is the same as that of the directory or the file is opened without the O_CREAT flag. The purpose is to make data spoofing attacks harder. This protection can be turned on and off separately for FIFOs and regular files via sysctl, just like the symlinks/hardlinks protection. This patch is based on Openwall's "HARDEN_FIFO" feature by Solar Designer. This is a brief list of old vulnerabilities that could have been prevented by this feature, some of them even allow for privilege escalation: CVE-2000-1134 CVE-2007-3852 CVE-2008-0525 CVE-2009-0416 CVE-2011-4834 CVE-2015-1838 CVE-2015-7442 CVE-2016-7489 This list is not meant to be complete. It's difficult to track down all vulnerabilities of this kind because they were often reported without any mention of this particular attack vector. In fact, before hardlinks/symlinks restrictions, fifos/regular files weren't the favorite vehicle to exploit them. [s.mesoraca16@gmail.com: fix bug reported by Dan Carpenter] Link: https://lkml.kernel.org/r/20180426081456.GA7060@mwanda Link: http://lkml.kernel.org/r/1524829819-11275-1-git-send-email-s.mesoraca16@gmail.com [keescook@chromium.org: drop pr_warn_ratelimited() in favor of audit changes in the future] [keescook@chromium.org: adjust commit subjet] Link: http://lkml.kernel.org/r/20180416175918.GA13494@beast Signed-off-by: Salvatore Mesoraca <s.mesoraca16@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Suggested-by: Solar Designer <solar@openwall.com> Suggested-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
 Manfred Spraul
|
e2652ae6bd |
ipc: reorganize initialization of kern_ipc_perm.seq
ipc_addid() initializes kern_ipc_perm.seq after having called idr_alloc() (within ipc_idr_alloc()). Thus a parallel semop() or msgrcv() that uses ipc_obtain_object_check() may see an uninitialized value. The patch moves the initialization of kern_ipc_perm.seq before the calls of idr_alloc(). Notes: 1) This patch has a user space visible side effect: If /proc/sys/kernel/*_next_id is used (i.e.: checkpoint/restore) and if semget()/msgget()/shmget() fails in the final step of adding the id to the rhash tree, then .._next_id is cleared. Before the patch, is remained unmodified. There is no change of the behavior after a successful ..get() call: It always clears .._next_id, there is no impact to non checkpoint/restore code as that code does not use .._next_id. 2) The patch correctly documents that after a call to ipc_idr_alloc(), the full tear-down sequence must be used. The callers of ipc_addid() do not fullfill that, i.e. more bugfixes are required. The patch is a squash of a patch from Dmitry and my own changes. Link: http://lkml.kernel.org/r/20180712185241.4017-3-manfred@colorfullife.com Reported-by: syzbot+2827ef6b3385deb07eaf@syzkaller.appspotmail.com Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
 Dmitry Vyukov
|
a2e5144538 |
kernel/hung_task.c: allow to set checking interval separately from timeout
Currently task hung checking interval is equal to timeout, as the result hung is detected anywhere between timeout and 2*timeout. This is fine for most interactive environments, but this hurts automated testing setups (syzbot). In an automated setup we need to strictly order CPU lockup < RCU stall < workqueue lockup < task hung < silent loss, so that RCU stall is not detected as task hung and task hung is not detected as silent machine loss. The large variance in task hung detection timeout requires setting silent machine loss timeout to a very large value (e.g. if task hung is 3 mins, then silent loss need to be set to ~7 mins). The additional 3 minutes significantly reduce testing efficiency because usually we crash kernel within a minute, and this can add hours to bug localization process as it needs to do dozens of tests. Allow setting checking interval separately from timeout. This allows to set timeout to, say, 3 minutes, but checking interval to 10 secs. The interval is controlled via a new hung_task_check_interval_secs sysctl, similar to the existing hung_task_timeout_secs sysctl. The default value of 0 results in the current behavior: checking interval is equal to timeout. [akpm@linux-foundation.org: update hung_task_timeout_max's comment] Link: http://lkml.kernel.org/r/20180611111004.203513-1-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
 juviliu
|
85f237a57f |
Documentation/sysctl/vm.txt: update __vm_enough_memory()'s path
__vm_enough_memory has moved to mm/util.c. Link: http://lkml.kernel.org/r/E18EDF4A4FA4A04BBFA824B6D7699E532A7E5913@EXMBX-SZMAIL013.tencent.com Signed-off-by: Juvi Liu <juviliu@tencent.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
d5acba26bf |
Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the bit set of char/misc drivers for 4.19-rc1
There is a lot here, much more than normal, seems like everyone is
writing new driver subsystems these days... Anyway, major things here
are:
- new FSI driver subsystem, yet-another-powerpc low-level hardware
bus
- gnss, finally an in-kernel GPS subsystem to try to tame all of the
crazy out-of-tree drivers that have been floating around for years,
combined with some really hacky userspace implementations. This is
only for GNSS receivers, but you have to start somewhere, and this
is great to see.
Other than that, there are new slimbus drivers, new coresight drivers,
new fpga drivers, and loads of DT bindings for all of these and
existing drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
android: binder: Rate-limit debug and userspace triggered err msgs
fsi: sbefifo: Bump max command length
fsi: scom: Fix NULL dereference
misc: mic: SCIF Fix scif_get_new_port() error handling
misc: cxl: changed asterisk position
genwqe: card_base: Use true and false for boolean values
misc: eeprom: assignment outside the if statement
uio: potential double frees if __uio_register_device() fails
eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
misc: ti-st: Fix memory leak in the error path of probe()
android: binder: Show extra_buffers_size in trace
firmware: vpd: Fix section enabled flag on vpd_section_destroy
platform: goldfish: Retire pdev_bus
goldfish: Use dedicated macros instead of manual bit shifting
goldfish: Add missing includes to goldfish.h
mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
dt-bindings: mux: add adi,adgs1408
Drivers: hv: vmbus: Cleanup synic memory free path
Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
...
|
||
 Prashant Dhamdhere
|
d1634e1aed |
Documentation: vm.txt: Adding 'nr_hugepages_mempolicy' parameter description.
This patch adds 'nr_hugepages_mempolicy' parameter which is currently missing in 'vm.txt' file. It also contains a short description of 'nr_hugepages_mempolicy' parameter. Signed-off-by: Prashant Dhamdhere <pdhamdhe@redhat.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
 Sunil Muthuswamy
|
81b18bce48 |
Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic
In the VM mode on Hyper-V, currently, when the kernel panics, an error code and few register values are populated in an MSR and the Hypervisor notified. This information is collected on the host. The amount of information currently collected is found to be limited and not very actionable. To gather more actionable data, such as stack trace, the proposal is to write one page worth of kmsg data on an allocated page and the Hypervisor notified of the page address through the MSR. - Sysctl option to control the behavior, with ON by default. Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
 Yang Shi
|
fc1ca3d5b4 |
doc: add description to dirtytime_expire_seconds
commit
|
||
|
Linus Torvalds
|
1c8c5a9d38 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
|
||
 Wang YanQing
|
03f5781be2 |
bpf, x86_32: add eBPF JIT compiler for ia32
The JIT compiler emits ia32 bit instructions. Currently, It supports eBPF
only. Classic BPF is supported because of the conversion by BPF core.
Almost all instructions from eBPF ISA supported except the following:
BPF_ALU64 | BPF_DIV | BPF_K
BPF_ALU64 | BPF_DIV | BPF_X
BPF_ALU64 | BPF_MOD | BPF_K
BPF_ALU64 | BPF_MOD | BPF_X
BPF_STX | BPF_XADD | BPF_W
BPF_STX | BPF_XADD | BPF_DW
It doesn't support BPF_JMP|BPF_CALL with BPF_PSEUDO_CALL at the moment.
IA32 has few general purpose registers, EAX|EDX|ECX|EBX|ESI|EDI. I use
EAX|EDX|ECX|EBX as temporary registers to simulate instructions in eBPF
ISA, and allocate ESI|EDI to BPF_REG_AX for constant blinding, all others
eBPF registers, R0-R10, are simulated through scratch space on stack.
The reasons behind the hardware registers allocation policy are:
1:MUL need EAX:EDX, shift operation need ECX, so they aren't fit
for general eBPF 64bit register simulation.
2:We need at least 4 registers to simulate most eBPF ISA operations
on registers operands instead of on register&memory operands.
3:We need to put BPF_REG_AX on hardware registers, or constant blinding
will degrade jit performance heavily.
Tested on PC (Intel(R) Core(TM) i5-5200U CPU).
Testing results on i5-5200U:
1) test_bpf: Summary: 349 PASSED, 0 FAILED, [319/341 JIT'ed]
2) test_progs: Summary: 83 PASSED, 0 FAILED.
3) test_lpm: OK
4) test_lru_map: OK
5) test_verifier: Summary: 828 PASSED, 0 FAILED.
Above tests are all done in following two conditions separately:
1:bpf_jit_enable=1 and bpf_jit_harden=0
2:bpf_jit_enable=1 and bpf_jit_harden=2
Below are some numbers for this jit implementation:
Note:
I run test_progs in kselftest 100 times continuously for every condition,
the numbers are in format: total/times=avg.
The numbers that test_bpf reports show almost the same relation.
a:jit_enable=0 and jit_harden=0 b:jit_enable=1 and jit_harden=0
test_pkt_access:PASS:ipv4:15622/100=156 test_pkt_access:PASS:ipv4:10674/100=106
test_pkt_access:PASS:ipv6:9130/100=91 test_pkt_access:PASS:ipv6:4855/100=48
test_xdp:PASS:ipv4:240198/100=2401 test_xdp:PASS:ipv4:138912/100=1389
test_xdp:PASS:ipv6:137326/100=1373 test_xdp:PASS:ipv6:68542/100=685
test_l4lb:PASS:ipv4:61100/100=611 test_l4lb:PASS:ipv4:37302/100=373
test_l4lb:PASS:ipv6:101000/100=1010 test_l4lb:PASS:ipv6:55030/100=550
c:jit_enable=1 and jit_harden=2
test_pkt_access:PASS:ipv4:10558/100=105
test_pkt_access:PASS:ipv6:5092/100=50
test_xdp:PASS:ipv4:131902/100=1319
test_xdp:PASS:ipv6:77932/100=779
test_l4lb:PASS:ipv4:38924/100=389
test_l4lb:PASS:ipv6:57520/100=575
The numbers show we get 30%~50% improvement.
See Documentation/networking/filter.txt for more information.
Changelog:
Changes v5-v6:
1:Add do {} while (0) to RETPOLINE_RAX_BPF_JIT for
consistence reason.
2:Clean up non-standard comments, reported by Daniel Borkmann.
3:Fix a memory leak issue, repoted by Daniel Borkmann.
Changes v4-v5:
1:Delete is_on_stack, BPF_REG_AX is the only one
on real hardware registers, so just check with
it.
2:Apply commit
|
||
 Mike Rapoport
|
1ad1335dc5 |
docs/admin-guide/mm: start moving here files from Documentation/vm
Several documents in Documentation/vm fit quite well into the "admin/user guide" category. The documents that don't overload the reader with lots of implementation details and provide coherent description of certain feature can be moved to Documentation/admin-guide/mm. Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
 Jonathan Corbet
|
24844fd339 |
Merge branch 'mm-rst' into docs-next
Mike Rapoport says: These patches convert files in Documentation/vm to ReST format, add an initial index and link it to the top level documentation. There are no contents changes in the documentation, except few spelling fixes. The relatively large diffstat stems from the indentation and paragraph wrapping changes. I've tried to keep the formatting as consistent as possible, but I could miss some places that needed markup and add some markup where it was not necessary. [jc: significant conflicts in vm/hmm.rst] |
||
|
Mike Rapoport
|
ad56b738c5 |
docs/vm: rename documentation files to .rst
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
 Kees Cook
|
bc4f2f5469 |
taint: add taint for randstruct
Since the randstruct plugin can intentionally produce extremely unusual kernel structure layouts (even performance pathological ones), some maintainers want to be able to trivially determine if an Oops is coming from a randstruct-built kernel, so as to keep their sanity when debugging. This adds the new flag and initializes taint_mask immediately when built with randstruct. Link: http://lkml.kernel.org/r/1519084390-43867-4-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kees Cook
|
9c4560e5bb |
taint: consolidate documentation
This consolidates the taint bit documentation into a single place with both numeric and letter values. Additionally adds the missing TAINT_AUX documentation. Link: http://lkml.kernel.org/r/1519084390-43867-3-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
 Joonsoo Kim
|
d3cda2337b |
mm/page_alloc: don't reserve ZONE_HIGHMEM for ZONE_MOVABLE request
Freepage on ZONE_HIGHMEM doesn't work for kernel memory so it's not that important to reserve. When ZONE_MOVABLE is used, this problem would theorectically cause to decrease usable memory for GFP_HIGHUSER_MOVABLE allocation request which is mainly used for page cache and anon page allocation. So, fix it by setting 0 to sysctl_lowmem_reserve_ratio[ZONE_HIGHMEM]. And, defining sysctl_lowmem_reserve_ratio array by MAX_NR_ZONES - 1 size makes code complex. For example, if there is highmem system, following reserve ratio is activated for *NORMAL ZONE* which would be easyily misleading people. #ifdef CONFIG_HIGHMEM 32 #endif This patch also fixes this situation by defining sysctl_lowmem_reserve_ratio array by MAX_NR_ZONES and place "#ifdef" to right place. Link: http://lkml.kernel.org/r/1504672525-17915-1-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Tony Lindgren <tony@atomide.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: <linux-api@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
 Eric Dumazet
|
79134e6ce2 |
net: do not create fallback tunnels for non-default namespaces
fallback tunnels (like tunl0, gre0, gretap0, erspan0, sit0, ip6tnl0, ip6gre0) are automatically created when the corresponding module is loaded. These tunnels are also automatically created when a new network namespace is created, at a great cost. In many cases, netns are used for isolation purposes, and these extra network devices are a waste of resources. We are using thousands of netns per host, and hit the netns creation/delete bottleneck a lot. (Many thanks to Kirill for recent work on this) Add a new sysctl so that we can opt-out from this automatic creation. Note that these tunnels are still created for the initial namespace, to be the least intrusive for typical setups. Tested: lpk43:~# cat add_del_unshare.sh for i in `seq 1 40` do (for j in `seq 1 100` ; do unshare -n /bin/true >/dev/null ; done) & done wait lpk43:~# echo 0 >/proc/sys/net/core/fb_tunnels_only_for_init_net lpk43:~# time ./add_del_unshare.sh real 0m37.521s user 0m0.886s sys 7m7.084s lpk43:~# echo 1 >/proc/sys/net/core/fb_tunnels_only_for_init_net lpk43:~# time ./add_del_unshare.sh real 0m4.761s user 0m0.851s sys 1m8.343s lpk43:~# Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
 Kangmin Park
|
60c3e026d7 |
Documentation/sysctl/user.txt: fix typo
Fix 'documetation' to 'documentation' Link: http://lkml.kernel.org/r/CAKW4uUxRPZz59aWAX8ytaCB5=Qh6d_CvAnO7rYq-6NRAnQJbDA@mail.gmail.com Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
255442c938 |
Merge tag 'docs-4.16' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet: "Documentation updates for 4.16. New stuff includes refcount_t documentation, errseq documentation, kernel-doc support for nested structure definitions, the removal of lots of crufty kernel-doc support for unused formats, SPDX tag documentation, the beginnings of a manual for subsystem maintainers, and lots of fixes and updates. As usual, some of the changesets reach outside of Documentation/ to effect kerneldoc comment fixes. It also adds the new LICENSES directory, of which Thomas promises I do not need to be the maintainer" * tag 'docs-4.16' of git://git.lwn.net/linux: (65 commits) linux-next: docs-rst: Fix typos in kfigure.py linux-next: DOC: HWPOISON: Fix path to debugfs in hwpoison.txt Documentation: Fix misconversion of #if docs: add index entry for networking/msg_zerocopy Documentation: security/credentials.rst: explain need to sort group_list LICENSES: Add MPL-1.1 license LICENSES: Add the GPL 1.0 license LICENSES: Add Linux syscall note exception LICENSES: Add the MIT license LICENSES: Add the BSD-3-clause "Clear" license LICENSES: Add the BSD 3-clause "New" or "Revised" License LICENSES: Add the BSD 2-clause "Simplified" license LICENSES: Add the LGPL-2.1 license LICENSES: Add the LGPL 2.0 license LICENSES: Add the GPL 2.0 license Documentation: Add license-rules.rst to describe how to properly identify file licenses scripts: kernel_doc: better handle show warnings logic fs/*/Kconfig: drop links to 404-compliant http://acl.bestbits.at doc: md: Fix a file name to md-fault.c in fault-injection.txt errseq: Add to documentation tree ... |