mirror of
https://github.com/ukui/kernel.git
synced 2026-03-09 10:07:04 -07:00
83ad357dee467f63574de35752bc40033deab30e
94 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Miroslav Lichvar
|
aad9c8c470 |
net: add new control message for incoming HW-timestamped packets
Add SOF_TIMESTAMPING_OPT_PKTINFO option to request a new control message for incoming packets with hardware timestamps. It contains the index of the real interface which received the packet and the length of the packet at layer 2. The index is useful with bonding, bridges and other interfaces, where IP_PKTINFO doesn't allow applications to determine which PHC made the timestamp. With the L2 length (and link speed) it is possible to transpose preamble timestamps to trailer timestamps, which are used in the NTP protocol. While this information could be provided by two new socket options independently from timestamping, it doesn't look like they would be very useful. With this option any performance impact is limited to hardware timestamping. Use dev_get_by_napi_id() to get the device and its index. On kernels with disabled CONFIG_NET_RX_BUSY_POLL or drivers not using NAPI, a zero index will be returned in the control message. CC: Richard Cochran <richardcochran@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Nicolas Dichtel
|
fcc8487d47 |
uapi: export all headers under uapi directories
Regularly, when a new header is created in include/uapi/, the developer forgets to add it in the corresponding Kbuild file. This error is usually detected after the release is out. In fact, all headers under uapi directories should be exported, thus it's useless to have an exhaustive list. After this patch, the following files, which were not exported, are now exported (with make headers_install_all): asm-arc/kvm_para.h asm-arc/ucontext.h asm-blackfin/shmparam.h asm-blackfin/ucontext.h asm-c6x/shmparam.h asm-c6x/ucontext.h asm-cris/kvm_para.h asm-h8300/shmparam.h asm-h8300/ucontext.h asm-hexagon/shmparam.h asm-m32r/kvm_para.h asm-m68k/kvm_para.h asm-m68k/shmparam.h asm-metag/kvm_para.h asm-metag/shmparam.h asm-metag/ucontext.h asm-mips/hwcap.h asm-mips/reg.h asm-mips/ucontext.h asm-nios2/kvm_para.h asm-nios2/ucontext.h asm-openrisc/shmparam.h asm-parisc/kvm_para.h asm-powerpc/perf_regs.h asm-sh/kvm_para.h asm-sh/ucontext.h asm-tile/shmparam.h asm-unicore32/shmparam.h asm-unicore32/ucontext.h asm-x86/hwcap2.h asm-xtensa/kvm_para.h drm/armada_drm.h drm/etnaviv_drm.h drm/vgem_drm.h linux/aspeed-lpc-ctrl.h linux/auto_dev-ioctl.h linux/bcache.h linux/btrfs_tree.h linux/can/vxcan.h linux/cifs/cifs_mount.h linux/coresight-stm.h linux/cryptouser.h linux/fsmap.h linux/genwqe/genwqe_card.h linux/hash_info.h linux/kcm.h linux/kcov.h linux/kfd_ioctl.h linux/lightnvm.h linux/module.h linux/nbd-netlink.h linux/nilfs2_api.h linux/nilfs2_ondisk.h linux/nsfs.h linux/pr.h linux/qrtr.h linux/rpmsg.h linux/sched/types.h linux/sed-opal.h linux/smc.h linux/smc_diag.h linux/stm.h linux/switchtec_ioctl.h linux/vfio_ccw.h linux/wil6210_uapi.h rdma/bnxt_re-abi.h Note that I have removed from this list the files which are generated in every exported directories (like .install or .install.cmd). Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all subdirs with a pure makefile command. For the record, note that exported files for asm directories are a mix of files listed by: - include/uapi/asm-generic/Kbuild.asm; - arch/<arch>/include/uapi/asm/Kbuild; - arch/<arch>/include/asm/Kbuild. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Mark Salter <msalter@redhat.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
||
Linus Torvalds
|
8d65b08deb |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
|
||
Al Viro
|
2611dc1939 |
Remove compat_sys_getdents64()
Unlike normal compat syscall variants, it is needed only for biarch architectures that have different alignement requirements for u64 in 32bit and 64bit ABI *and* have __put_user() that won't handle a store of 64bit value at 32bit-aligned address. We used to have one such (ia64), but its biarch support has been gone since 2010 (after being broken in 2008, which went unnoticed since nobody had been using it). It had escaped removal at the same time only because back in 2004 a patch that switched several syscalls on amd64 from private wrappers to generic compat ones had switched to use of compat_sys_getdents64(), which hadn't needed (or used) a compat wrapper on amd64. Let's bury it - it's at least 7 years overdue. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
Chenbo Feng
|
5daab9db7b |
New getsockopt option to get socket cookie
Introduce a new getsockopt operation to retrieve the socket cookie for a specific socket based on the socket fd. It returns a unique non-decreasing cookie for each socket. Tested: https://android-review.googlesource.com/#/c/358163/ Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Chenbo Feng <fengc@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
David S. Miller
|
6f14f443d3 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Mostly simple cases of overlapping changes (adding code nearby, a function whose name changes, for example). Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Sridhar Samudrala
|
6d4339028b |
net: Introduce SO_INCOMING_NAPI_ID
This socket option returns the NAPI ID associated with the queue on which the last frame is received. This information can be used by the apps to split the incoming flows among the threads based on the Rx queue on which they are received. If the NAPI ID actually represents a sender_cpu then the value is ignored and 0 is returned. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Josh Hunt
|
a2d133b1d4 |
sock: introduce SO_MEMINFO getsockopt
Allows reading of SK_MEMINFO_VARS via socket option. This way an application can get all meminfo related information in single socket option call instead of multiple calls. Adds helper function, sk_get_meminfo(), and uses that for both getsockopt and sock_diag_put_meminfo(). Suggested by Eric Dumazet. Signed-off-by: Josh Hunt <johunt@akamai.com> Reviewed-by: Jason Baron <jbaron@akamai.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Stafford Horne
|
fdfe4a393e |
generic syscalls: Wire up statx syscall
The new syscall statx is implemented as generic code, so enable it
for architectures like openrisc which use the generic syscall table.
Fixes:
|
||
Andrea Arcangeli
|
e067eba587 |
userfaultfd: document _IOR/_IOW
Patch series "userfaultfd tmpfs/hugetlbfs/non-cooperative", v2 These userfaultfd features are finished and are ready for larger exposure in -mm and upstream merging. 1) tmpfs non present userfault 2) hugetlbfs non present userfault 3) non cooperative userfault for fork/madvise/mremap qemu development code is already exercising 2) and container postcopy live migration needs 3). 1) is not currently used but there's a self test and we know some qemu user for various reasons uses tmpfs as backing for KVM so it'll need it too to use postcopy live migration with tmpfs memory. All review feedback from the previous submit has been handled and the fixes are included. There's no outstanding issue AFIK. Upstream code just did a s/fe/vmf/ conversion in the page faults and this has been converted as well incrementally. In addition to the previous submits, this also wakes up stuck userfaults during UFFDIO_UNREGISTER. The non cooperative testcase actually reproduced this problem by getting stuck instead of quitting clean in some rare case as it could call UFFDIO_UNREGISTER while some userfault could be still in flight. The other option would have been to keep leaving it up to userland to serialize itself and to patch the testcase instead but the wakeup during unregister I think is preferable. David also asked the UFFD_FEATURE_MISSING_HUGETLBFS and UFFD_FEATURE_MISSING_SHMEM feature flags to be added so QEMU can avoid to probe if the hugetlbfs/shmem missing support is available by calling UFFDIO_REGISTER. QEMU already checks HUGETLBFS_MAGIC with fstatfs so if UFFD_FEATURE_MISSING_HUGETLBFS is also set, it knows UFFDIO_REGISTER will succeed (or if it fails, it's for some other more concerning reason). There's no reason to worry about adding too many feature flags. There are 64 available and worst case we've to bump the API if someday we're really going to run out of them. The round-trip network latency of hugetlbfs userfaults during postcopy live migration is still of the order of dozen milliseconds on 10GBit if at 2MB hugepage granularity so it's working perfectly and it should provide for higher bandwidth or lower CPU usage (which makes it interesting to add an option in the future to support THP granularity too for anonymous memory, UFFDIO_COPY would then have to create THP if alignment/len allows for it). 1GB hugetlbfs granularity will require big changes in hugetlbfs to work so it's deferred for later. This patch (of 42): This adds proper documentation (inline) to avoid the risk of further misunderstandings about the semantics of _IOW/_IOR and it also reminds whoever will bump the UFFDIO_API in the future, to change the two ioctl to _IOW. This was found while implementing strace support for those ioctl, otherwise we could have never found it by just reviewing kernel code and testing it. _IOC_READ or _IOC_WRITE alters nothing but the ioctl number itself, so it's only worth fixing if the UFFDIO_API is bumped someday. Link: http://lkml.kernel.org/r/20161216144821.5183-2-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: "Dmitry V. Levin" <ldv@altlinux.org> Cc: Michael Rapoport <RAPOPORT@il.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Francis Yan
|
1c885808e4 |
tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING
This patch exports the sender chronograph stats via the socket SO_TIMESTAMPING channel. Currently we can instrument how long a particular application unit of data was queued in TCP by tracking SOF_TIMESTAMPING_TX_SOFTWARE and SOF_TIMESTAMPING_TX_SCHED. Having these sender chronograph stats exported simultaneously along with these timestamps allow further breaking down the various sender limitation. For example, a video server can tell if a particular chunk of video on a connection takes a long time to deliver because TCP was experiencing small receive window. It is not possible to tell before this patch without packet traces. To prepare these stats, the user needs to set SOF_TIMESTAMPING_OPT_STATS and SOF_TIMESTAMPING_OPT_TSONLY flags while requesting other SOF_TIMESTAMPING TX timestamps. When the timestamps are available in the error queue, the stats are returned in a separate control message of type SCM_TIMESTAMPING_OPT_STATS, in a list of TLVs (struct nlattr) of types: TCP_NLA_BUSY_TIME, TCP_NLA_RWND_LIMITED, TCP_NLA_SNDBUF_LIMITED. Unit is microsecond. Signed-off-by: Francis Yan <francisyyan@gmail.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Dave Hansen
|
71757904ef |
generic syscalls: kill cruft from removed pkey syscalls
pkey_set() and pkey_get() were syscalls present in older versions
of the protection keys patches. They were fully excised from the
x86 code, but some cruft was left in the generic syscall code. The
C++ comments were intended to help to make it more glaring to me to
fix them before actually submitting them. That technique worked,
but later than I would have liked.
I test-compiled this for arm64.
Fixes:
|
||
Dave Hansen
|
a60f7b69d9 |
generic syscalls: Wire up memory protection keys syscalls
These new syscalls are implemented as generic code, so enable them for architectures like arm64 which use the generic syscall table. According to Arnd: Even if the support is x86 specific for the forseeable future, it may be good to reserve the number just in case. The other architecture specific syscall lists are usually left to the individual arch maintainers, most a lot of the newer architectures share this table. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave@sr71.net> Cc: mgorman@techsingularity.net Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163018.505A6875@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
||
|
Dave Hansen
|
e8c24d3a23 |
x86/pkeys: Allocation/free syscalls
This patch adds two new system calls: int pkey_alloc(unsigned long flags, unsigned long init_access_rights) int pkey_free(int pkey); These implement an "allocator" for the protection keys themselves, which can be thought of as analogous to the allocator that the kernel has for file descriptors. The kernel tracks which numbers are in use, and only allows operations on keys that are valid. A key which was not obtained by pkey_alloc() may not, for instance, be passed to pkey_mprotect(). These system calls are also very important given the kernel's use of pkeys to implement execute-only support. These help ensure that userspace can never assume that it has control of a key unless it first asks the kernel. The kernel does not promise to preserve PKRU (right register) contents except for allocated pkeys. The 'init_access_rights' argument to pkey_alloc() specifies the rights that will be established for the returned pkey. For instance: pkey = pkey_alloc(flags, PKEY_DENY_WRITE); will allocate 'pkey', but also sets the bits in PKRU[1] such that writing to 'pkey' is already denied. The kernel does not prevent pkey_free() from successfully freeing in-use pkeys (those still assigned to a memory range by pkey_mprotect()). It would be expensive to implement the checks for this, so we instead say, "Just don't do it" since sane software will never do it anyway. Any piece of userspace calling pkey_alloc() needs to be prepared for it to fail. Why? pkey_alloc() returns the same error code (ENOSPC) when there are no pkeys and when pkeys are unsupported. They can be unsupported for a whole host of reasons, so apps must be prepared for this. Also, libraries or LD_PRELOADs might steal keys before an application gets access to them. This allocation mechanism could be implemented in userspace. Even if we did it in userspace, we would still need additional user/kernel interfaces to tell userspace which keys are being used by the kernel internally (such as for execute-only mappings). Having the kernel provide this facility completely removes the need for these additional interfaces, or having an implementation of this in userspace at all. Note that we have to make changes to all of the architectures that do not use mman-common.h because we use the new PKEY_DENY_ACCESS/WRITE macros in arch-independent code. 1. PKRU is the Protection Key Rights User register. It is a usermode-accessible register that controls whether writes and/or access to each individual pkey is allowed or denied. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: linux-arch@vger.kernel.org Cc: Dave Hansen <dave@sr71.net> Cc: arnd@arndb.de Cc: linux-api@vger.kernel.org Cc: linux-mm@kvack.org Cc: luto@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
||
James Hogan
|
b0da6d4415 |
asm-generic: Drop renameat syscall from default list
The newer renameat2 syscall provides all the functionality provided by the renameat syscall and adds flags, so future architectures won't need to include renameat. Therefore drop the renameat syscall from the generic syscall list unless __ARCH_WANT_RENAMEAT is defined by the architecture's unistd.h prior to including asm-generic/unistd.h, and adjust all architectures using the generic syscall list to define it so that no in-tree architectures are affected. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Cc: linux-arch@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: linux-c6x-dev@linux-c6x.org Cc: Richard Kuo <rkuo@codeaurora.org> Cc: linux-hexagon@vger.kernel.org Cc: linux-metag@vger.kernel.org Cc: Jonas Bonn <jonas@southpole.se> Cc: linux@lists.openrisc.net Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ley Foon Tan <lftan@altera.com> Cc: nios2-dev@lists.rocketboards.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Yury Norov
|
1f93e9f231 |
asm-generic: use compat version for preadv2 and pwritev2
Compat architectures that does not use generic unistd (mips, s390), declare compat version in their syscall tables for preadv2 and pwritev2. Generic unistd syscall table should do it as well. [arnd: this initially slipped through the review and an incorrect patch got merged. arch/tile/ is the only architecture that could be affected for their 32-bit compat mode, every other architecture we support today is fine.] Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Andre Przywara
|
987aedb5d6 |
generic syscalls: wire up preadv2 and pwritev2 syscalls
These new syscalls are implemented as generic code, so enable them for architectures like arm64 which use the generic syscall table. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Torvalds
|
643ad15d47 |
Merge branch 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 protection key support from Ingo Molnar:
"This tree adds support for a new memory protection hardware feature
that is available in upcoming Intel CPUs: 'protection keys' (pkeys).
There's a background article at LWN.net:
https://lwn.net/Articles/643797/
The gist is that protection keys allow the encoding of
user-controllable permission masks in the pte. So instead of having a
fixed protection mask in the pte (which needs a system call to change
and works on a per page basis), the user can map a (handful of)
protection mask variants and can change the masks runtime relatively
cheaply, without having to change every single page in the affected
virtual memory range.
This allows the dynamic switching of the protection bits of large
amounts of virtual memory, via user-space instructions. It also
allows more precise control of MMU permission bits: for example the
executable bit is separate from the read bit (see more about that
below).
This tree adds the MM infrastructure and low level x86 glue needed for
that, plus it adds a high level API to make use of protection keys -
if a user-space application calls:
mmap(..., PROT_EXEC);
or
mprotect(ptr, sz, PROT_EXEC);
(note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice
this special case, and will set a special protection key on this
memory range. It also sets the appropriate bits in the Protection
Keys User Rights (PKRU) register so that the memory becomes unreadable
and unwritable.
So using protection keys the kernel is able to implement 'true'
PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies
PROT_READ as well. Unreadable executable mappings have security
advantages: they cannot be read via information leaks to figure out
ASLR details, nor can they be scanned for ROP gadgets - and they
cannot be used by exploits for data purposes either.
We know about no user-space code that relies on pure PROT_EXEC
mappings today, but binary loaders could start making use of this new
feature to map binaries and libraries in a more secure fashion.
There is other pending pkeys work that offers more high level system
call APIs to manage protection keys - but those are not part of this
pull request.
Right now there's a Kconfig that controls this feature
(CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled
(like most x86 CPU feature enablement code that has no runtime
overhead), but it's not user-configurable at the moment. If there's
any serious problem with this then we can make it configurable and/or
flip the default"
* 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
x86/mm/pkeys: Fix mismerge of protection keys CPUID bits
mm/pkeys: Fix siginfo ABI breakage caused by new u64 field
x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA
mm/core, x86/mm/pkeys: Add execute-only protection keys support
x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags
x86/mm/pkeys: Allow kernel to modify user pkey rights register
x86/fpu: Allow setting of XSAVE state
x86/mm: Factor out LDT init from context init
mm/core, x86/mm/pkeys: Add arch_validate_pkey()
mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits()
x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU
x86/mm/pkeys: Add Kconfig prompt to existing config option
x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps
x86/mm/pkeys: Dump PKRU with other kernel registers
mm/core, x86/mm/pkeys: Differentiate instruction fetches
x86/mm/pkeys: Optimize fault handling in access_error()
mm/core: Do not enforce PKEY permissions on remote mm access
um, pkeys: Add UML arch_*_access_permitted() methods
mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys
x86/mm/gup: Simplify get_user_pages() PTE bit handling
...
|
||
|
Dave Hansen
|
49cd53bf14 |
mm/pkeys: Fix siginfo ABI breakage caused by new u64 field
Stephen Rothwell reported this linux-next build failure:
http://lkml.kernel.org/r/20160226164406.065a1ffc@canb.auug.org.au
... caused by the Memory Protection Keys patches from the tip tree triggering
a newly introduced build-time sanity check on an ARM build, because they changed
the ABI of siginfo in an unexpected way.
If u64 has a natural alignment of 8 bytes (which is the case on most mainstream
platforms, with the notable exception of x86-32), then the leadup to the
_sifields union matters:
typedef struct siginfo {
int si_signo;
int si_errno;
int si_code;
union {
...
} _sifields;
} __ARCH_SI_ATTRIBUTES siginfo_t;
Note how the first 3 fields give us 12 bytes, so _sifields is not 8
naturally bytes aligned.
Before the _pkey field addition the largest element of _sifields (on
32-bit platforms) was 32 bits. With the u64 added, the minimum alignment
requirement increased to 8 bytes on those (rare) 32-bit platforms. Thus
GCC padded the space after si_code with 4 extra bytes, and shifted all
_sifields offsets by 4 bytes - breaking the ABI of all of those
remaining fields.
On 64-bit platforms this problem was hidden due to _sifields already
having numerous fields with natural 8 bytes alignment (pointers).
To fix this, we replace the u64 with an '__u32'. The __u32 does not
increase the minimum alignment requirement of the union, and it is
also large enough to store the 16-bit pkey we have today on x86.
Reported-by: Stehen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Stehen Rothwell <sfr@canb.auug.org.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Helge Deller <deller@gmx.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-next@vger.kernel.org
Fixes:
|
||
Tom Herbert
|
a87cb3e48e |
net: Facility to report route quality of connected sockets
This patch add the SO_CNX_ADVICE socket option (setsockopt only). The purpose is to allow an application to give feedback to the kernel about the quality of the network path for a connected socket. The value argument indicates the type of quality report. For this initial patch the only supported advice is a value of 1 which indicates "bad path, please reroute"-- the action taken by the kernel is to call dst_negative_advice which will attempt to choose a different ECMP route, reset the TX hash for flow label and UDP source port in encapsulation, etc. This facility should be useful for connected UDP sockets where only the application can provide any feedback about path quality. It could also be useful for TCP applications that have additional knowledge about the path outside of the normal TCP control loop. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Dave Hansen
|
cd0ea35ff5 |
signals, pkeys: Notify userspace about protection key faults
A protection key fault is very similar to any other access error. There must be a VMA, etc... We even want to take the same action (SIGSEGV) that we do with a normal access fault. However, we do need to let userspace know that something is different. We do this the same way what we did with SEGV_BNDERR with Memory Protection eXtensions (MPX): define a new SEGV code: SEGV_PKUERR. We add a siginfo field: si_pkey that reveals to userspace which protection key was set on the PTE that we faulted on. There is no other easy way for userspace to figure this out. They could parse smaps but that would be a bit cruel. We share space with in siginfo with _addr_bnd. #BR faults from MPX are completely separate from page faults (#PF) that trigger from protection key violations, so we never need both at the same time. Note that _pkey is a 64-bit value. The current hardware only supports 4-bit protection keys. We do this because there is _plenty_ of space in _sigfault and it is possible that future processors would support more than 4 bits of protection keys. The x86 code to actually fill in the siginfo is in the next patch. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amanieu d'Antras <amanieu@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210212.3A9B83AC@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Chen Gang
|
21f55b018b |
arch/*/include/uapi/asm/mman.h: : let MADV_FREE have same value for all architectures
For uapi, need try to let all macros have same value, and MADV_FREE is added into main branch recently, so need redefine MADV_FREE for it. At present, '8' can be shared with all architectures, so redefine it to '8'. [sudipm.mukherjee@gmail.com: correct uniform value of MADV_FREE] Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Roland Dreier <roland@kernel.org> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Shaohua Li <shli@kernel.org> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Jason Evans <je@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Rik van Riel <riel@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Shaohua Li <shli@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Minchan Kim
|
854e9ed09d |
mm: support madvise(MADV_FREE)
Linux doesn't have an ability to free pages lazy while other OS already have been supported that named by madvise(MADV_FREE). The gain is clear that kernel can discard freed pages rather than swapping out or OOM if memory pressure happens. Without memory pressure, freed pages would be reused by userspace without another additional overhead(ex, page fault + allocation + zeroing). Jason Evans said: : Facebook has been using MAP_UNINITIALIZED : (https://lkml.org/lkml/2012/1/18/308) in some of its applications for : several years, but there are operational costs to maintaining this : out-of-tree in our kernel and in jemalloc, and we are anxious to retire it : in favor of MADV_FREE. When we first enabled MAP_UNINITIALIZED it : increased throughput for much of our workload by ~5%, and although the : benefit has decreased using newer hardware and kernels, there is still : enough benefit that we cannot reasonably retire it without a replacement. : : Aside from Facebook operations, there are numerous broadly used : applications that would benefit from MADV_FREE. The ones that immediately : come to mind are redis, varnish, and MariaDB. I don't have much insight : into Android internals and development process, but I would hope to see : MADV_FREE support eventually end up there as well to benefit applications : linked with the integrated jemalloc. : : jemalloc will use MADV_FREE once it becomes available in the Linux kernel. : In fact, jemalloc already uses MADV_FREE or equivalent everywhere it's : available: *BSD, OS X, Windows, and Solaris -- every platform except Linux : (and AIX, but I'm not sure it even compiles on AIX). The lack of : MADV_FREE on Linux forced me down a long series of increasingly : sophisticated heuristics for madvise() volume reduction, and even so this : remains a common performance issue for people using jemalloc on Linux. : Please integrate MADV_FREE; many people will benefit substantially. How it works: When madvise syscall is called, VM clears dirty bit of ptes of the range. If memory pressure happens, VM checks dirty bit of page table and if it found still "clean", it means it's a "lazyfree pages" so VM could discard the page instead of swapping out. Once there was store operation for the page before VM peek a page to reclaim, dirty bit is set so VM can swap out the page instead of discarding. One thing we should notice is that basically, MADV_FREE relies on dirty bit in page table entry to decide whether VM allows to discard the page or not. IOW, if page table entry includes marked dirty bit, VM shouldn't discard the page. However, as a example, if swap-in by read fault happens, page table entry doesn't have dirty bit so MADV_FREE could discard the page wrongly. For avoiding the problem, MADV_FREE did more checks with PageDirty and PageSwapCache. It worked out because swapped-in page lives on swap cache and since it is evicted from the swap cache, the page has PG_dirty flag. So both page flags check effectively prevent wrong discarding by MADV_FREE. However, a problem in above logic is that swapped-in page has PG_dirty still after they are removed from swap cache so VM cannot consider the page as freeable any more even if madvise_free is called in future. Look at below example for detail. ptr = malloc(); memset(ptr); .. .. .. heavy memory pressure so all of pages are swapped out .. .. var = *ptr; -> a page swapped-in and could be removed from swapcache. Then, page table doesn't mark dirty bit and page descriptor includes PG_dirty .. .. madvise_free(ptr); -> It doesn't clear PG_dirty of the page. .. .. .. .. heavy memory pressure again. .. In this time, VM cannot discard the page because the page .. has *PG_dirty* To solve the problem, this patch clears PG_dirty if only the page is owned exclusively by current process when madvise is called because PG_dirty represents ptes's dirtiness in several processes so we could clear it only if we own it exclusively. Firstly, heavy users would be general allocators(ex, jemalloc, tcmalloc and hope glibc supports it) and jemalloc/tcmalloc already have supported the feature for other OS(ex, FreeBSD) barrios@blaptop:~/benchmark/ebizzy$ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 12 On-line CPU(s) list: 0-11 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 12 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 2 Stepping: 3 CPU MHz: 3200.185 BogoMIPS: 6400.53 Virtualization: VT-x Hypervisor vendor: KVM Virtualization type: full L1d cache: 32K L1i cache: 32K L2 cache: 4096K NUMA node0 CPU(s): 0-11 ebizzy benchmark(./ebizzy -S 10 -n 512) Higher avg is better. vanilla-jemalloc MADV_free-jemalloc 1 thread records: 10 records: 10 avg: 2961.90 avg: 12069.70 std: 71.96(2.43%) std: 186.68(1.55%) max: 3070.00 max: 12385.00 min: 2796.00 min: 11746.00 2 thread records: 10 records: 10 avg: 5020.00 avg: 17827.00 std: 264.87(5.28%) std: 358.52(2.01%) max: 5244.00 max: 18760.00 min: 4251.00 min: 17382.00 4 thread records: 10 records: 10 avg: 8988.80 avg: 27930.80 std: 1175.33(13.08%) std: 3317.33(11.88%) max: 9508.00 max: 30879.00 min: 5477.00 min: 21024.00 8 thread records: 10 records: 10 avg: 13036.50 avg: 33739.40 std: 170.67(1.31%) std: 5146.22(15.25%) max: 13371.00 max: 40572.00 min: 12785.00 min: 24088.00 16 thread records: 10 records: 10 avg: 11092.40 avg: 31424.20 std: 710.60(6.41%) std: 3763.89(11.98%) max: 12446.00 max: 36635.00 min: 9949.00 min: 25669.00 32 thread records: 10 records: 10 avg: 11067.00 avg: 34495.80 std: 971.06(8.77%) std: 2721.36(7.89%) max: 12010.00 max: 38598.00 min: 9002.00 min: 30636.00 In summary, MADV_FREE is about much faster than MADV_DONTNEED. This patch (of 12): Add core MADV_FREE implementation. [akpm@linux-foundation.org: small cleanups] Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jason Evans <je@fb.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Shaohua Li <shli@kernel.org> Cc: <yalin.wang2010@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: "Shaohua Li" <shli@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Shaohua Li <shli@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
aee3bfa330 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from Davic Miller:
1) Support busy polling generically, for all NAPI drivers. From Eric
Dumazet.
2) Add byte/packet counter support to nft_ct, from Floriani Westphal.
3) Add RSS/XPS support to mvneta driver, from Gregory Clement.
4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
Frederic Sowa.
5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.
6) Add support for VLAN device bridging to mlxsw switch driver, from
Ido Schimmel.
7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.
8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.
9) Reorganize wireless drivers into per-vendor directories just like we
do for ethernet drivers. From Kalle Valo.
10) Provide a way for administrators "destroy" connected sockets via the
SOCK_DESTROY socket netlink diag operation. From Lorenzo Colitti.
11) Add support to add/remove multicast routes via netlink, from Nikolay
Aleksandrov.
12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.
13) Add forwarding and packet duplication facilities to nf_tables, from
Pablo Neira Ayuso.
14) Dead route support in MPLS, from Roopa Prabhu.
15) TSO support for thunderx chips, from Sunil Goutham.
16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.
17) Rationalize, consolidate, and more completely document the checksum
offloading facilities in the networking stack. From Tom Herbert.
18) Support aborting an ongoing scan in mac80211/cfg80211, from
Vidyullatha Kanchanapally.
19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
net: bnxt: always return values from _bnxt_get_max_rings
net: bpf: reject invalid shifts
phonet: properly unshare skbs in phonet_rcv()
dwc_eth_qos: Fix dma address for multi-fragment skbs
phy: remove an unneeded condition
mdio: remove an unneed condition
mdio_bus: NULL dereference on allocation error
net: Fix typo in netdev_intersect_features
net: freescale: mac-fec: Fix build error from phy_device API change
net: freescale: ucc_geth: Fix build error from phy_device API change
bonding: Prevent IPv6 link local address on enslaved devices
IB/mlx5: Add flow steering support
net/mlx5_core: Export flow steering API
net/mlx5_core: Make ipv4/ipv6 location more clear
net/mlx5_core: Enable flow steering support for the IB driver
net/mlx5_core: Initialize namespaces only when supported by device
net/mlx5_core: Set priority attributes
net/mlx5_core: Connect flow tables
net/mlx5_core: Introduce modify flow table command
net/mlx5_core: Managing root flow table
...
|
||
Craig Gallek
|
538950a1b7 |
soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF
Expose socket options for setting a classic or extended BPF program for use when selecting sockets in an SO_REUSEPORT group. These options can be used on the first socket to belong to a group before bind or on any socket in the group after bind. This change includes refactoring of the existing sk_filter code to allow reuse of the existing BPF filter validation checks. Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |