mirror of
https://github.com/ukui/kernel.git
synced 2026-03-09 10:07:04 -07:00
3005b17c5e2f426576530e3a69af2f7df16efb60
89 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Sergey Senozhatsky
|
ab6f762f0f |
printk: queue wake_up_klogd irq_work only if per-CPU areas are ready
printk_deferred(), similarly to printk_safe/printk_nmi, does not
immediately attempt to print a new message on the consoles, avoiding
calls into non-reentrant kernel paths, e.g. scheduler or timekeeping,
which potentially can deadlock the system.
Those printk() flavors, instead, rely on per-CPU flush irq_work to print
messages from safer contexts. For same reasons (recursive scheduler or
timekeeping calls) printk() uses per-CPU irq_work in order to wake up
user space syslog/kmsg readers.
However, only printk_safe/printk_nmi do make sure that per-CPU areas
have been initialised and that it's safe to modify per-CPU irq_work.
This means that, for instance, should printk_deferred() be invoked "too
early", that is before per-CPU areas are initialised, printk_deferred()
will perform illegal per-CPU access.
Lech Perczak [0] reports that after commit
|
||
 Kefeng Wang
|
61ff72f401 |
printk: Drop pr_warning definition
With all pr_warning are removed, saftely drop pr_warning definition. Link: http://lkml.kernel.org/r/20191128004752.35268-4-wangkefeng.wang@huawei.com To: joe@perches.com To: linux-kernel@vger.kernel.org Cc: gregkh@linuxfoundation.org Cc: tj@kernel.org Cc: arnd@arndb.de Cc: sergey.senozhatsky@gmail.com Cc: rostedt@goodmis.org Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Petr Mladek <pmladek@suse.com> |
||
 Stephen Boyd
|
091cb0994e |
lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds
I'm seeing a bunch of debug prints from a user of print_hex_dump_bytes() in my kernel logs, but I don't have CONFIG_DYNAMIC_DEBUG enabled nor do I have DEBUG defined in my build. The problem is that print_hex_dump_bytes() calls a wrapper function in lib/hexdump.c that calls print_hex_dump() with KERN_DEBUG level. There are three cases to consider here 1. CONFIG_DYNAMIC_DEBUG=y --> call dynamic_hex_dum() 2. CONFIG_DYNAMIC_DEBUG=n && DEBUG --> call print_hex_dump() 3. CONFIG_DYNAMIC_DEBUG=n && !DEBUG --> stub it out Right now, that last case isn't detected and we still call print_hex_dump() from the stub wrapper. Let's make print_hex_dump_bytes() only call print_hex_dump_debug() so that it works properly in all cases. Case #1, print_hex_dump_debug() calls dynamic_hex_dump() and we get same behavior. Case #2, print_hex_dump_debug() calls print_hex_dump() with KERN_DEBUG and we get the same behavior. Case #3, print_hex_dump_debug() is a nop, changing behavior to what we want, i.e. print nothing. Link: http://lkml.kernel.org/r/20190816235624.115280-1-swboyd@chromium.org Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
 Feng Tang
|
c39ea0b9dd |
panic: avoid the extra noise dmesg
When kernel panic happens, it will first print the panic call stack, then the ending msg like: [ 35.743249] ---[ end Kernel panic - not syncing: Fatal exception [ 35.749975] ------------[ cut here ]------------ The above message are very useful for debugging. But if system is configured to not reboot on panic, say the "panic_timeout" parameter equals 0, it will likely print out many noisy message like WARN() call stack for each and every CPU except the panic one, messages like below: WARNING: CPU: 1 PID: 280 at kernel/sched/core.c:1198 set_task_cpu+0x183/0x190 Call Trace: <IRQ> try_to_wake_up default_wake_function autoremove_wake_function __wake_up_common __wake_up_common_lock __wake_up wake_up_klogd_work_func irq_work_run_list irq_work_tick update_process_times tick_sched_timer __hrtimer_run_queues hrtimer_interrupt smp_apic_timer_interrupt apic_timer_interrupt For people working in console mode, the screen will first show the panic call stack, but immediately overridden by these noisy extra messages, which makes debugging much more difficult, as the original context gets lost on screen. Also these noisy messages will confuse some users, as I have seen many bug reporters posted the noisy message into bugzilla, instead of the real panic call stack and context. Adding a flag "suppress_printk" which gets set in panic() to avoid those noisy messages, without changing current kernel behavior that both panic blinking and sysrq magic key can work as is, suggested by Petr Mladek. To verify this, make sure kernel is not configured to reboot on panic and in console # echo c > /proc/sysrq-trigger to see if console only prints out the panic call stack. Link: http://lkml.kernel.org/r/1551430186-24169-1-git-send-email-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Suggested-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Cc: Borislav Petkov <bp@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
 Paul Gortmaker
|
3ec25826ae |
printk: Tie printk_once / printk_deferred_once into .data.once for reset
In commit
|
||
 Linus Torvalds
|
c4703acd6d |
Merge tag 'printk-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek: - Allow to sort mixed lines by an extra information about the caller - Remove no longer used LOG_PREFIX. - Some clean up and documentation update. * tag 'printk-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk/docs: Add extra integer types to printk-formats printk: Remove no longer used LOG_PREFIX. lib/vsprintf: Remove %pCr remnant in comment printk: Pass caller information to log_store(). printk: Add caller information to printk() output. |
||
 Rasmus Villemoes
|
a9d4ab7a91 |
linux/printk.h: use DYNAMIC_DEBUG_BRANCH in pr_debug_ratelimited
pr_debug_ratelimited tests the dynamic debug descriptor the old-fashioned way, and doesn't utilize the static key/jump label implementation when CONFIG_JUMP_LABEL is set. Use the DYNAMIC_DEBUG_BRANCH which is defined appropriately. Link: http://lkml.kernel.org/r/20190212214150.4807-4-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Petr Mladek <pmladek@suse.com> Acked-by: Jason Baron <jbaron@akamai.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
 Tetsuo Handa
|
e36202a844 |
printk: Remove no longer used LOG_PREFIX.
When commit |
||
 Alexey Dobriyan
|
e6310f0fb5 |
include/linux/printk.h: drop silly "static inline asmlinkage" from dump_stack()
Empty function will be inlined so asmlinkage doesn't do anything. Link: http://lkml.kernel.org/r/20181124093530.GE10969@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Joey Pabalinas <joeypabalinas@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Tetsuo Handa
|
9adcfaffc3 |
printk: Make printk_emit() local function.
printk_emit() is called from only devkmsg_write() in the same file. Save object size by making it a local function. Link: http://lkml.kernel.org/r/5cc99d2c-c408-34f7-d1fc-e1cd2a9e31da@i-love.sakura.ne.jp Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> |
||
 Petr Mladek
|
9f68cb5791 | Merge branch 'for-4.19-nmi' into for-linus | ||
|
Petr Mladek
|
03fc7f9c99 |
printk/nmi: Prevent deadlock when accessing the main log buffer in NMI
The commit |
||
 Hans de Goede
|
22eceb8bf3 |
printk: Make CONSOLE_LOGLEVEL_QUIET configurable
The goal of passing the "quiet" option to the kernel is for the kernel to be quiet unless something really is wrong. Sofar passing quiet has been (mostly) equivalent to passing loglevel=4 on the kernel commandline. Which means to show any messages with a level of KERN_ERR or higher severity on the console. In practice this often does not result in a quiet boot though, since there are many false-positive or otherwise harmless error messages printed, defeating the purpose of the quiet option. Esp. the ACPICA code is really bad wrt this, but there are plenty of others too. This commit makes CONSOLE_LOGLEVEL_QUIET configurable. This for example will allow distros which want quiet to really mean quiet to set CONSOLE_LOGLEVEL_QUIET so that only messages with a higher severity then KERN_ERR (CRIT, ALERT, EMERG) get printed, avoiding an endless game of whack-a-mole silencing harmless error messages. Link: http://lkml.kernel.org/r/20180619115726.3098-1-hdegoede@redhat.com To: Petr Mladek <pmladek@suse.com> To: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> |
||
 Dave Young
|
e36df28f53 |
printk: move dump stack related code to lib/dump_stack.c
dump_stack related stuff should belong to lib/dump_stack.c thus move them there. Also conditionally compile lib/dump_stack.c since dump_stack code does not make sense if printk is disabled. Link: http://lkml.kernel.org/r/20180213072834.GA24784@dhcp-128-65.nay.redhat.com To: Steven Rostedt <rostedt@goodmis.org> Cc: linux-kernel@vger.kernel.org Cc: akpm@linux-foundation.org Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Dave Young <dyoung@redhat.com> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Suggested-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> |
||
|
Linus Torvalds
|
11ca75d2d6 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek: - print the warning about dropped messages on consoles on a separate line. It makes it more legible. - one typo fix and small code clean up. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: added new line symbol after warning about dropped messages printk: fix typo in printk_safe.c printk: simplify no_printk() |
||
 Arnd Bergmann
|
01c313dded |
kallsyms: fix building without printk
Building kallsyms fails without CONFIG_PRINTK due to a missing
declaration:
kernel/kallsyms.c: In function 'kallsyms_show_value':
kernel/kallsyms.c:670:10: error: 'kptr_restrict' undeclared (first use in this function); did you mean 'keyring_restrict'?
This moves the declaration outside of the #ifdef guard, the definition
is already available without CONFIG_PRINTK.
Fixes:
|
||
 Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
 Masahiro Yamada
|
93b138dd9d |
printk: simplify no_printk()
Commit
|
||
 Hari Bathini
|
692f66f26a |
crash: move crashkernel parsing and vmcore related code under CONFIG_CRASH_CORE
Patch series "kexec/fadump: remove dependency with CONFIG_KEXEC and reuse crashkernel parameter for fadump", v4. Traditionally, kdump is used to save vmcore in case of a crash. Some architectures like powerpc can save vmcore using architecture specific support instead of kexec/kdump mechanism. Such architecture specific support also needs to reserve memory, to be used by dump capture kernel. crashkernel parameter can be a reused, for memory reservation, by such architecture specific infrastructure. This patchset removes dependency with CONFIG_KEXEC for crashkernel parameter and vmcoreinfo related code as it can be reused without kexec support. Also, crashkernel parameter is reused instead of fadump_reserve_mem to reserve memory for fadump. The first patch moves crashkernel parameter parsing and vmcoreinfo related code under CONFIG_CRASH_CORE instead of CONFIG_KEXEC_CORE. The second patch reuses the definitions of append_elf_note() & final_note() functions under CONFIG_CRASH_CORE in IA64 arch code. The third patch removes dependency on CONFIG_KEXEC for firmware-assisted dump (fadump) in powerpc. The next patch reuses crashkernel parameter for reserving memory for fadump, instead of the fadump_reserve_mem parameter. This has the advantage of using all syntaxes crashkernel parameter supports, for fadump as well. The last patch updates fadump kernel documentation about use of crashkernel parameter. This patch (of 5): Traditionally, kdump is used to save vmcore in case of a crash. Some architectures like powerpc can save vmcore using architecture specific support instead of kexec/kdump mechanism. Such architecture specific support also needs to reserve memory, to be used by dump capture kernel. crashkernel parameter can be a reused, for memory reservation, by such architecture specific infrastructure. But currently, code related to vmcoreinfo and parsing of crashkernel parameter is built under CONFIG_KEXEC_CORE. This patch introduces CONFIG_CRASH_CORE and moves the above mentioned code under this config, allowing code reuse without dependency on CONFIG_KEXEC. There is no functional change with this patch. Link: http://lkml.kernel.org/r/149035338104.6881.4550894432615189948.stgit@hbathini.in.ibm.com Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Sergey Senozhatsky
|
099f1c84c0 |
printk: introduce per-cpu safe_print seq buffer
This patch extends the idea of NMI per-cpu buffers to regions
that may cause recursive printk() calls and possible deadlocks.
Namely, printk() can't handle printk calls from schedule code
or printk() calls from lock debugging code (spin_dump() for instance);
because those may be called with `sem->lock' already taken or any
other `critical' locks (p->pi_lock, etc.). An example of deadlock
can be
vprintk_emit()
console_unlock()
up() << raw_spin_lock_irqsave(&sem->lock, flags);
wake_up_process()
try_to_wake_up()
ttwu_queue()
ttwu_activate()
activate_task()
enqueue_task()
enqueue_task_fair()
cfs_rq_of()
task_of()
WARN_ON_ONCE(!entity_is_task(se))
vprintk_emit()
console_trylock()
down_trylock()
raw_spin_lock_irqsave(&sem->lock, flags)
^^^^ deadlock
and some other cases.
Just like in NMI implementation, the solution uses a per-cpu
`printk_func' pointer to 'redirect' printk() calls to a 'safe'
callback, that store messages in a per-cpu buffer and flushes
them back to logbuf buffer later.
Usage example:
printk()
printk_safe_enter_irqsave(flags)
//
// any printk() call from here will endup in vprintk_safe(),
// that stores messages in a special per-CPU buffer.
//
printk_safe_exit_irqrestore(flags)
The 'redirection' mechanism, though, has been reworked, as suggested
by Petr Mladek. Instead of using a per-cpu @print_func callback we now
keep a per-cpu printk-context variable and call either default or nmi
vprintk function depending on its value. printk_nmi_entrer/exit and
printk_safe_enter/exit, thus, just set/celar corresponding bits in
printk-context functions.
The patch only adds printk_safe support, we don't use it yet.
Link: http://lkml.kernel.org/r/20161227141611.940-4-sergey.senozhatsky@gmail.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Calvin Owens <calvinowens@fb.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
||
|
Sergey Senozhatsky
|
f92bac3b14 |
printk: rename nmi.c and exported api
A preparation patch for printk_safe work. No functional change. - rename nmi.c to print_safe.c - add `printk_safe' prefix to some (which used both by printk-safe and printk-nmi) of the exported functions. Link: http://lkml.kernel.org/r/20161227141611.940-3-sergey.senozhatsky@gmail.com Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Calvin Owens <calvinowens@fb.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> |
||
 Olof Johansson
|
a8cfdc68f6 |
printk: add Kconfig option to set default console loglevel
Add a configuration option to set the default console loglevel. This is, as before, still possible to override at runtime through bootargs (loglevel=<x>), sysrq and /proc/printk. There are cases where adding additional arguments on the commandline is impractical, and changing the default for the kernel when being built makes more sense. Provide such a method here, for those who choose to do so. Also, while touching this code, clarify the difference between MESSAGE_LOGLEVEL_DEFAULT and CONSOLE_LOGLEVEL_DEFAULT. Link: http://lkml.kernel.org/r/1479676829-30031-1-git-send-email-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Petr Mladek
|
262c5e86fe |
printk/btrfs: handle more message headers
Commit |
||
|
Petr Mladek
|
497957576c |
printk/kdb: handle more message headers
Commit
|
||
|
Linus Torvalds
|
4bcc595ccd |
printk: reinstate KERN_CONT for printing continuation lines
Long long ago the kernel log buffer was a buffered stream of bytes, very much like stdio in user space. It supported log levels by scanning the stream and noticing the log level markers at the beginning of each line, but if you wanted to print a partial line in multiple chunks, you just did multiple printk() calls, and it just automatically worked. Except when it didn't, and you had very confusing output when different lines got all mixed up with each other. Then you got fragment lines mixing with each other, or with non-fragment lines, because it was traditionally impossible to tell whether a printk() call was a continuation or not. To at least help clarify the issue of continuation lines, we added a KERN_CONT marker back in 2007 to mark continuation lines: |