Pull drm fixes from Dave Airlie:
"Nothing too major or scary.
One i915 regression fix, nouveau has a tmds regression fix, along with
a regression fix for the runtime pm code for optimus laptops not
restoring the display hw correctly"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: make sure display hardware is reinitialised on runtime resume
drm/nouveau: punt fbcon resume out to a workqueue
drm/nouveau: fix regression on original nv50 board
drm/nv50/disp: fix dpms regression on certain boards
drm/i915: Flush the PTEs after updating them before suspend
final regression fix for 3.17.
* tag 'drm-intel-fixes-2014-10-02' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Flush the PTEs after updating them before suspend
Linus commit 05c63c2ff2 modified the
runtime suspend/resume paths to skip over display-related tasks to
avoid locking issues on resume.
Unfortunately, this resulted in the display hardware being left in
a partially initialised state, preventing subsequent modesets from
completing.
This commit unifies the (many) suspend/resume paths, bringing back
display (and fbcon) handling in the runtime paths.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Preparation for some runtime pm fixes. Currently we skip over fbcon
suspend/resume in the runtime path, which causes issues on resume if
fbcon tries to write to the framebuffer before the BAR subdev has
been resumed to restore the BAR1 VM setup.
As we might be woken up via a sysfs connector, we are unable to call
fb_set_suspend() in the resume path as it could make its way down to
a modeset and cause all sorts of locking hilarity.
To solve this, we'll just delay the fbcon resume to a workqueue.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Xorg (and any non-DRM client really) doesn't have permission to directly
touch VRAM on nv50 and up, which the fence code prior to g84 depends on.
It's less invasive to temporarily grant it premission to do so, as it
previously did, than it is to rework fencenv50 to use the VM. That
will come later on.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Some of the Thinkpads' firmware will issue a backlight change request
through i915 operation region unconditionally on AC plug/unplug, the
backlight level used is arbitrary and thus should be ignored. This is
handled by commit 0b9f7d93ca (ACPI / i915: ignore firmware requests
for backlight change). Then there is a Dell laptop whose vendor backlight
interface also makes use of operation region to change backlight level
and with the above commit, that interface no long works. The condition
used to ignore the backlight change request from firmware is thus
changed to: if the vendor backlight interface is not in use and the ACPI
backlight interface is broken, we ignore the requests; oterwise, we keep
processing them.
Fixes: 0b9f7d93ca (ACPI / i915: ignore firmware requests for backlight change)
Link: https://lkml.org/lkml/2014/9/23/854
Reported-and-tested-by: Pali Rohár <pali.rohar@gmail.com>
Cc: 3.16+ <stable@vger.kernel.org> # 3.16+
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- fix a backlight regression resulting in dark screen
- add a PX quirk to avoid a hang with runtime pm
- fix an init issue on the CIK compute rings
- fix IH ring buffer overflows gracefully
* 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/cik: use a separate counter for CP init timeout
drm/radeon: add PX quirk for asus K53TK
drm/radeon: add a backlight quirk for Amilo Xi 2550
drm/radeon: add a module parameter for backlight control (v2)
drm/radeon: Update IH_RB_RPTR register after each processed interrupt
drm/radeon: Make IH ring overflow debugging output more useful
drm/radeon: Clear RB_OVERFLOW bit earlier
Ring init and cleanup are not balanced because we re-init the rings on
resume without having cleaned them up on suspend. This leads to the
driver leaking the parser's hash tables with a kmemleak signature such
as this:
unreferenced object 0xffff880405960980 (size 32):
comm "systemd-udevd", pid 516, jiffies 4294896961 (age 10202.044s)
hex dump (first 32 bytes):
d0 85 46 c0 ff ff ff ff 00 00 00 00 00 00 00 00 ..F.............
98 60 28 04 04 88 ff ff 00 00 00 00 00 00 00 00 .`(.............
backtrace:
[<ffffffff81816f9e>] kmemleak_alloc+0x4e/0xb0
[<ffffffff811fa678>] kmem_cache_alloc_trace+0x168/0x2f0
[<ffffffffc03e20a5>] i915_cmd_parser_init_ring+0x2a5/0x3e0 [i915]
[<ffffffffc04088a2>] intel_init_ring_buffer+0x202/0x470 [i915]
[<ffffffffc040c998>] intel_init_vebox_ring_buffer+0x1e8/0x2b0 [i915]
[<ffffffffc03eff59>] i915_gem_init_hw+0x2f9/0x3a0 [i915]
[<ffffffffc03f0057>] i915_gem_init+0x57/0x1d0 [i915]
[<ffffffffc045e26a>] i915_driver_load+0xc0a/0x10e0 [i915]
[<ffffffffc02e0d5d>] drm_dev_register+0xad/0x100 [drm]
[<ffffffffc02e3b9f>] drm_get_pci_dev+0x8f/0x200 [drm]
[<ffffffffc03c934b>] i915_pci_probe+0x3b/0x60 [i915]
[<ffffffff81436725>] local_pci_probe+0x45/0xa0
[<ffffffff81437a69>] pci_device_probe+0xd9/0x130
[<ffffffff81524f4d>] driver_probe_device+0x12d/0x3e0
[<ffffffff815252d3>] __driver_attach+0x93/0xa0
[<ffffffff81522e1b>] bus_for_each_dev+0x6b/0xb0
This patch extends the current convention of checking whether a
resource is already allocated before allocating it during ring init.
Longer term it might make sense to only init the rings once.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83794
Tested-by: Kari Suvanto <kari.tj.suvanto@gmail.com>
Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add a module parameter to disable the radeon GPU backlight
controller to override the automatic detection. Some
laptops seems to indicate that they use the integrated
controller, but appear to actually use an external
controller.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=81382
v2: fix module parameter description
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the same format for all ring indices, and fix the calculation of the
post-overflow RPTR.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise the bit remains set in rdev->ih.rptr, so the wptr can never
match that and we still have an infinite loop.
This fix allows me to successfully recover from an IH ring buffer
overflow.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull drm fixes from Dave Airlie:
"A bunch of radeon fixes for oops on module unload, and problems with
resetting the dma engine, one nouveau fix for black boxes in rendering
on my mbp retina, one sti fix, and a couple of intel fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: ltc/gf100-: fix cbc issues on certain boards
drm/bochs: add missing drm_connector_register call
drm/cirrus: add missing drm_connector_register call
drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page
drm/nouveau/runpm: fix module unload
drm/radeon/px: fix module unload
vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops
drm/radeon: don't reset dma on r6xx-evergreen init
drm/radeon: don't reset sdma on CIK init
drm/radeon: don't reset dma on NI/SI init
drm/radeon/dpm: fix resume on mullins
drm/radeon: Disable HDP flush before every CS again for < r600
drm/radeon: delete unused PTE_* defines
drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chv
drm: sti: do not iterate over the info frame array
drm/i915: Fix SRC_COPY width on 830/845g
A mismatch between FB and LTC's idea of how big a large page is causes
issues such as black "holes" in rendering to occur on some boards
(those where LTC is configured for 64KiB large pages) when compression
is used.
Confirmed to fix at least the GK107 MBP.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
single fix for regression on rs4xx/rs690/rs740
* 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page
Pull PCI fixes from Bjorn Helgaas:
"These fix:
- Boot video device detection on dual-GPU Apple systems
- Hotplug fiascos on VGA switcheroo with radeon & nouveau drivers
- Boot hang on Freescale i.MX6 systems
- Excessive "no hotplug settings from platform" warnings
In particular:
Enumeration
- Don't default exclusively to first video device (Bruno Prémont)
PCI device hotplug
- Remove "no hotplug settings from platform" warning (Bjorn Helgaas)
- Add pci_ignore_hotplug() for VGA switcheroo (Bjorn Helgaas)
Freescale i.MX6
- Put LTSSM in "Detect" state before disabling (Lucas Stach)"
* tag 'pci-v3.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
vgaarb: Drop obsolete #ifndef
vgaarb: Don't default exclusively to first video device with mem+io
ACPIPHP / radeon / nouveau: Remove acpi_bus_no_hotplug()
PCI: Remove "no hotplug settings from platform" warning
PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device
PCI: imx6: Put LTSSM in "Detect" state before disabling it
MAINTAINERS: Add Lucas Stach as co-maintainer for i.MX6 PCI driver
* pci/vga:
vgaarb: Drop obsolete #ifndef
vgaarb: Don't default exclusively to first video device with mem+io
* commit '6a73336bde29':
PCI: Remove "no hotplug settings from platform" warning
