The tracepoint in get_mapping_status() only dumped the incoming mpext
fields. This patch added a new tracepoint in mptcp_sendmsg_frag() to dump
the outgoing mpext too.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TUN can be used as vhost-net backend. E.g, the tun_net_xmit() is the
interface to forward the skb from TUN to vhost-net/virtio-net.
However, there are many "goto drop" in the TUN driver. Therefore, the
kfree_skb_reason() is involved at each "goto drop" to help userspace
ftrace/ebpf to track the reason for the loss of packets.
The below reasons are introduced:
- SKB_DROP_REASON_DEV_READY
- SKB_DROP_REASON_NOMEM
- SKB_DROP_REASON_HDR_TRUNC
- SKB_DROP_REASON_TAP_FILTER
- SKB_DROP_REASON_TAP_TXFILTER
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TAP can be used as vhost-net backend. E.g., the tap_handle_frame() is
the interface to forward the skb from TAP to vhost-net/virtio-net.
However, there are many "goto drop" in the TAP driver. Therefore, the
kfree_skb_reason() is involved at each "goto drop" to help userspace
ftrace/ebpf to track the reason for the loss of packets.
The below reasons are introduced:
- SKB_DROP_REASON_SKB_CSUM
- SKB_DROP_REASON_SKB_GSO_SEG
- SKB_DROP_REASON_SKB_UCOPY_FAULT
- SKB_DROP_REASON_DEV_HDR
- SKB_DROP_REASON_FULL_RING
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add reason for skb drops to __netif_receive_skb_core() when packet_type
not found to handle the skb. For this purpose, the drop reason
SKB_DROP_REASON_PTYPE_ABSENT is introduced. Take ether packets for
example, this case mainly happens when L3 protocol is not supported.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in sch_handle_ingress() with
kfree_skb_reason(). Following drop reasons are introduced:
SKB_DROP_REASON_TC_INGRESS
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in do_xdp_generic() with kfree_skb_reason().
The drop reason SKB_DROP_REASON_XDP is introduced for this case.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in enqueue_to_backlog() with
kfree_skb_reason(). The skb rop reason SKB_DROP_REASON_CPU_BACKLOG is
introduced for the case of failing to enqueue the skb to the per CPU
backlog queue. The further reason can be backlog queue full or RPS
flow limition, and I think we needn't to make further distinctions.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add reasons for skb drops to __dev_xmit_skb() by replacing
kfree_skb_list() with kfree_skb_list_reason(). The drop reason of
SKB_DROP_REASON_QDISC_DROP is introduced for qdisc enqueue fails.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in sch_handle_egress() with kfree_skb_reason().
The drop reason SKB_DROP_REASON_TC_EGRESS is introduced. Considering
the code path of tc egerss, we make it distinct with the drop reason
of SKB_DROP_REASON_QDISC_DROP in the next commit.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in __neigh_event_send() with
kfree_skb_reason(). Following drop reasons are added:
SKB_DROP_REASON_NEIGH_FAILED
SKB_DROP_REASON_NEIGH_QUEUEFULL
SKB_DROP_REASON_NEIGH_DEAD
The first two reasons above should be the hot path that skb drops
in neighbour subsystem.
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() which is used in the packet egress path of IP layer
with kfree_skb_reason(). Functions that are involved include:
__ip_queue_xmit()
ip_finish_output()
ip_mc_finish_output()
ip6_output()
ip6_finish_output()
ip6_finish_output2()
Following new drop reasons are introduced:
SKB_DROP_REASON_IP_OUTNOROUTES
SKB_DROP_REASON_BPF_CGROUP_EGRESS
SKB_DROP_REASON_IPV6DISABLED
SKB_DROP_REASON_NEIGH_CREATEFAIL
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace tcp_drop() used in tcp_data_queue() with tcp_drop_reason().
Following drop reasons are introduced:
SKB_DROP_REASON_TCP_ZEROWINDOW
SKB_DROP_REASON_TCP_OLD_DATA
SKB_DROP_REASON_TCP_OVERWINDOW
SKB_DROP_REASON_TCP_OLD_DATA is used for the case that end_seq of skb
less than the left edges of receive window. (Maybe there is a better
name?)
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the address of drop reason to tcp_v4_inbound_md5_hash() and
tcp_v6_inbound_md5_hash() to store the reasons for skb drops when this
function fails. Therefore, the drop reason can be passed to
kfree_skb_reason() when the skb needs to be freed.
Following drop reasons are added:
SKB_DROP_REASON_TCP_MD5NOTFOUND
SKB_DROP_REASON_TCP_MD5UNEXPECTED
SKB_DROP_REASON_TCP_MD5FAILURE
SKB_DROP_REASON_TCP_MD5* above correspond to LINUX_MIB_TCPMD5*
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave suggested a while ago (eleven years by now) "Let's make netif_rx()
work in all contexts and get rid of netif_rx_ni()". Eric agreed and
pointed out that modern devices should use netif_receive_skb() to avoid
the overhead.
In the meantime someone added another variant, netif_rx_any_context(),
which behaves as suggested.
netif_rx() must be invoked with disabled bottom halves to ensure that
pending softirqs, which were raised within the function, are handled.
netif_rx_ni() can be invoked only from process context (bottom halves
must be enabled) because the function handles pending softirqs without
checking if bottom halves were disabled or not.
netif_rx_any_context() invokes on the former functions by checking
in_interrupts().
netif_rx() could be taught to handle both cases (disabled and enabled
bottom halves) by simply disabling bottom halves while invoking
netif_rx_internal(). The local_bh_enable() invocation will then invoke
pending softirqs only if the BH-disable counter drops to zero.
Eric is concerned about the overhead of BH-disable+enable especially in
regard to the loopback driver. As critical as this driver is, it will
receive a shortcut to avoid the additional overhead which is not needed.
Add a local_bh_disable() section in netif_rx() to ensure softirqs are
handled if needed.
Provide __netif_rx() which does not disable BH and has a lockdep assert
to ensure that interrupts are disabled. Use this shortcut in the
loopback driver and in drivers/net/*.c.
Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they
can be removed once they are no more users left.
Link: https://lkml.kernel.org/r/20100415.020246.218622820.davem@davemloft.net
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds a couple of new ioctls for mctp sockets:
SIOCMCTPALLOCTAG and SIOCMCTPDROPTAG. These ioctls provide facilities
for explicit allocation / release of tags, overriding the automatic
allocate-on-send/release-on-reply and timeout behaviours. This allows
userspace more control over messages that may not fit a simple
request/response model.
In order to indicate a pre-allocated tag to the sendmsg() syscall, we
introduce a new flag to the struct sockaddr_mctp.smctp_tag value:
MCTP_TAG_PREALLOC.
Additional changes from Jeremy Kerr <jk@codeconstruct.com.au>.
Contains a fix that was:
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() with kfree_skb_reason() in __udp_queue_rcv_skb().
Following new drop reasons are introduced:
SKB_DROP_REASON_SOCKET_RCVBUFF
SKB_DROP_REASON_PROTO_MEM
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() with kfree_skb_reason() in ip_protocol_deliver_rcu().
Following new drop reasons are introduced:
SKB_DROP_REASON_XFRM_POLICY
SKB_DROP_REASON_IP_NOPROTO
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() with kfree_skb_reason() in ip_rcv_finish_core(),
following drop reasons are introduced:
SKB_DROP_REASON_IP_RPFILTER
SKB_DROP_REASON_UNICAST_IN_L2_MULTICAST
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() with kfree_skb_reason() in ip_rcv_core(). Three new
drop reasons are introduced:
SKB_DROP_REASON_OTHERHOST
SKB_DROP_REASON_IP_CSUM
SKB_DROP_REASON_IP_INHDR
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() with kfree_skb_reason() in nf_hook_slow() when
skb is dropped by reason of NF_DROP. Following new drop reasons
are introduced:
SKB_DROP_REASON_NETFILTER_DROP
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pulltracing fixes from Steven Rostedt:
- Limit mcount build time sorting to only those archs that we know it
works for.
- Fix memory leak in error path of histogram setup
- Fix and clean up rel_loc array out of bounds issue
- tools/rtla documentation fixes
- Fix issues with histogram logic
* tag 'trace-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Don't inc err_log entry count if entry allocation fails
tracing: Propagate is_signed to expression
tracing: Fix smatch warning for do while check in event_hist_trigger_parse()
tracing: Fix smatch warning for null glob in event_hist_trigger_parse()
tools/tracing: Update Makefile to build rtla
rtla: Make doc build optional
tracing/perf: Avoid -Warray-bounds warning for __rel_loc macro
tracing: Avoid -Warray-bounds warning for __rel_loc macro
tracing/histogram: Fix a potential memory leak for kstrdup()
ftrace: Have architectures opt-in for mcount build time sorting
As done for trace_events.h, also fix the __rel_loc macro in perf.h,
which silences the -Warray-bounds warning:
In file included from ./include/linux/string.h:253,
from ./include/linux/bitmap.h:11,
from ./include/linux/cpumask.h:12,
from ./include/linux/mm_types_task.h:14,
from ./include/linux/mm_types.h:5,
from ./include/linux/buildid.h:5,
from ./include/linux/module.h:14,
from samples/trace_events/trace-events-sample.c:2:
In function '__fortify_strcpy',
inlined from 'perf_trace_foo_rel_loc' at samples/trace_events/./trace-events-sample.h:519:1:
./include/linux/fortify-string.h:47:33: warning: '__builtin_strcpy' offset 12 is out of the bounds [
0, 4] [-Warray-bounds]
47 | #define __underlying_strcpy __builtin_strcpy
| ^
./include/linux/fortify-string.h:445:24: note: in expansion of macro '__underlying_strcpy'
445 | return __underlying_strcpy(p, q);
| ^~~~~~~~~~~~~~~~~~~
Also make __data struct member a proper flexible array to avoid future
problems.
Link: https://lkml.kernel.org/r/20220125220037.2738923-1-keescook@chromium.org
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 55de2c0b56 ("tracing: Add '__rel_loc' using trace event macros")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>