Various updates to soc/fsl for 4.19
Moves DPAA2 DPIO driver from staging to fsl/soc
Adds multiple-pin support to QE gpio driver
* tag 'soc-fsl-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: cleanup Kconfig menu
soc: fsl: dpio: Convert DPIO documentation to .rst
staging: fsl-mc: Remove remaining files
staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
staging: fsl-dpaa2: eth: move generic FD defines to DPIO
soc: fsl: qe: gpio: Add qe_gpio_set_multiple
Signed-off-by: Olof Johansson <olof@lixom.net>
Move the NXP DPIO (Datapath I/O Driver) out of the
drivers/staging directory and into the drivers/soc/fsl directory.
The DPIO driver enables access to Queue and Buffer Manager (QBMAN)
hardware on NXP DPAA2 devices. This is a prerequisite to moving the
DPAA2 Ethernet driver out of staging.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Platform drivers need make a lot of resource state requests at the same
time, say, at the start or end of an usecase. It can be quite
inefficient to send each request separately. Instead they can give the
RPMH library a batch of requests to be sent and wait on the whole
transaction to be complete.
rpmh_write_batch() is a blocking call that can be used to send multiple
RPMH command sets. Each RPMH command set is set asynchronously and the
API blocks until all the command sets are complete and receive their
tx_done callbacks.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Platform drivers that want to send a request but do not want to block
until the RPMH request completes have now a new API -
rpmh_write_async().
The API allocates memory and send the requests and returns the control
back to the platform driver. The tx_done callback from the controller is
handled in the context of the controller's thread and frees the
allocated memory. This API allows RPMH requests from atomic contexts as
well.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Active state requests are sent immediately to the RSC controller, while
sleep and wake state requests are cached in this driver to avoid taxing
the RSC controller repeatedly. The cached values will be sent to the
controller when the rpmh_flush() is called.
Generally, flushing is a system PM activity and may be called from the
system PM drivers when the system is entering suspend or deeper sleep
modes during cpuidle.
Also allow invalidating the cached requests, so they may be re-populated
again.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
[rplsssn: remove unneeded semicolon, address line over 80chars error]
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Sending RPMH requests and waiting for response from the controller
through a callback is common functionality across all platform drivers.
To simplify drivers, add a library functions to create RPMH client and
send resource state requests.
rpmh_write() is a synchronous blocking call that can be used to send
active state requests.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add controller driver for QCOM SoCs that have hardware based shared
resource management. The hardware IP known as RSC (Resource State
Coordinator) houses multiple Direct Resource Voter (DRV) for different
execution levels. A DRV is a unique voter on the state of a shared
resource. A Trigger Control Set (TCS) is a bunch of slots that can house
multiple resource state requests, that when triggered will issue those
requests through an internal bus to the Resource Power Manager Hardened
(RPMH) blocks. These hardware blocks are capable of adjusting clocks,
voltages, etc. The resource state request from a DRV are aggregated
along with state requests from other processors in the SoC and the
aggregate value is applied on the resource.
Some important aspects of the RPMH communication -
- Requests are <addr, value> with some header information
- Multiple requests (upto 16) may be sent through a TCS, at a time
- Requests in a TCS are sent in sequence
- Requests may be fire-n-forget or completion (response expected)
- Multiple TCS from the same DRV may be triggered simultaneously
- Cannot send a request if another request for the same addr is in
progress from the same DRV
- When all the requests from a TCS are complete, an IRQ is raised
- The IRQ handler needs to clear the TCS before it is available for
reuse
- TCS configuration is specific to a DRV
- Platform drivers may use DRV from different RSCs to make requests
Resource state requests made when CPUs are active are called 'active'
state requests. Requests made when all the CPUs are powered down (idle
state) are called 'sleep' state requests. They are matched by a
corresponding 'wake' state requests which puts the resources back in to
previously requested active state before resuming any CPU. TCSes are
dedicated for each type of requests. Active mode TCSes (AMC) are used to
send requests immediately to the resource, while control TCS are used to
provide specific information to the controller. Sleep and Wake TCS send
sleep and wake requests, after and before the system halt respectively.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Recent Raspberry Pi firmware provides a mailbox property to detect
under-voltage conditions. Here is the current definition.
The u32 value returned by the firmware is divided into 2 parts:
- lower 16-bits are the live value
- upper 16-bits are the history or sticky value
Bits:
0: undervoltage
1: arm frequency capped
2: currently throttled
16: undervoltage has occurred
17: arm frequency capped has occurred
18: throttling has occurred
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Pull ARM SoC late updates from Olof Johansson:
"This is a branch with a few merge requests that either came in late,
or took a while longer for us to review and merge than usual and thus
cut it a bit close to the merge window. We stage them in a separate
branch and if things look good, we still send them up -- and that's
the case here.
This is mostly DT additions for Renesas platforms, adding IP block
descriptions for existing and new SoCs.
There are also some driver updates for Qualcomm platforms for SMEM/QMI
and GENI, which is their generalized serial protocol interface"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits)
soc: qcom: smem: introduce qcom_smem_virt_to_phys()
soc: qcom: qmi: fix a buffer sizing bug
MAINTAINERS: Update pattern for qcom_scm
soc: Unconditionally include qcom Makefile
soc: qcom: smem: check sooner in qcom_smem_set_global_partition()
soc: qcom: smem: fix qcom_smem_set_global_partition()
soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private()
soc: qcom: smem: byte swap values properly
soc: qcom: smem: return proper type for cached entry functions
soc: qcom: smem: fix first cache entry calculation
soc: qcom: cmd-db: Make endian-agnostic
drivers: qcom: add command DB driver
arm64: dts: renesas: salvator-common: Add ADV7482 support
ARM: dts: r8a7740: Add CEU1
ARM: dts: r8a7740: Add CEU0
arm64: dts: renesas: salvator-common: enable VIN
arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7795-es1: add CSI-2 node
...
The tegra_cpuidle_pcie_irqs_in_use() function is stubbed out for non-ARM
builds, but now we can compile-test the Tegra pci driver on non-Tegra
ARM platforms as well, which results in a new link error:
drivers/pci/host/pci-tegra.o: In function `tegra_pcie_map_irq':
pci-tegra.c:(.text+0x288): undefined reference to `tegra_cpuidle_pcie_irqs_in_use'
drivers/pci/host/pci-tegra.o: In function `tegra_msi_map':
pci-tegra.c:(.text+0xba0): undefined reference to `tegra_cpuidle_pcie_irqs_in_use'
This adapts the #ifdef statement to match the exact condition under which
the function can be called.
Fixes: 51bc085d64 ("PCI: Improve host drivers compile test coverage")
Cc: Rob Herring <robh@kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Command DB is a simple database in the shared memory of QCOM SoCs, that
provides information regarding shared resources. Some shared resources
in the SoC have properties that are probed dynamically at boot by the
remote processor. The information pertaining to the SoC and the platform
are made available in the shared memory. Drivers can query this
information using predefined strings.
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
memory: tegra: Changes for v4.18-rc1
This contains some cleanup of the memory controller driver as well as
unification work to share more code between Tegra20 and later SoC
generations. Also included are an implementation for the hot resets
functionality by the memory controller which is required to properly
reset busy hardware.
* tag 'tegra-for-4.18-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions
memory: tegra: Remove Tegra114 SATA and AFI reset definitions
memory: tegra: Register SMMU after MC driver became ready
memory: tegra: Add Tegra210 memory controller hot resets
memory: tegra: Add Tegra124 memory controller hot resets
memory: tegra: Add Tegra114 memory controller hot resets
memory: tegra: Add Tegra30 memory controller hot resets
memory: tegra: Add Tegra20 memory controller hot resets
memory: tegra: Introduce memory client hot reset
memory: tegra: Squash tegra20-mc into common tegra-mc driver
memory: tegra: Remove unused headers inclusions
memory: tegra: Apply interrupts mask per SoC
memory: tegra: Setup interrupts mask before requesting IRQ
memory: tegra: Do not handle spurious interrupts
dt-bindings: memory: tegra: Add hot resets definitions
Signed-off-by: Olof Johansson <olof@lixom.net>
In order to reset busy HW properly, memory controller needs to be
involved, otherwise it is possible to get corrupted memory or hang machine
if HW was reset during DMA. Introduce memory client 'hot reset' that will
be used for resetting of busy HW.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra30+ has some minor differences in registers / bits layout compared
to Tegra20. Let's squash Tegra20 driver into the common tegra-mc driver
in a preparation for the upcoming MC hot reset controls implementation,
avoiding code duplication.
Note that this currently doesn't report the value of MC_GART_ERROR_REQ
because it is located within the GART register area and cannot be safely
accessed from the MC driver (this happens to work only by accident). The
proper solution is to integrate the GART driver with the MC driver, much
like is done for the Tegra SMMU, but that is an invasive change and will
be part of a separate patch series.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently we are enabling handling of interrupts specific to Tegra124+
which happen to overlap with previous generations. Let's specify
interrupts mask per SoC generation for consistency and in a preparation
of squashing of Tegra20 driver into the common one that will enable
handling of GART faults which may be undesirable by newer generations.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
If CONFIG_RASPBERRYPI_FIRMWARE=n:
drivers/gpio/gpio-raspberrypi-exp.c: In function ‘rpi_exp_gpio_get_polarity’:
drivers/gpio/gpio-raspberrypi-exp.c:71: warning: ‘get.polarity’ is used uninitialized in this function
drivers/gpio/gpio-raspberrypi-exp.c: In function ‘rpi_exp_gpio_get_direction’:
drivers/gpio/gpio-raspberrypi-exp.c:150: warning: ‘get.direction’ is used uninitialized in this function
The dummy firmware interface functions return 0, which means success,
causing subsequent code to make use of the never initialized output
parameter.
Fix this by making the dummy functions return an error code (-ENOSYS)
instead.
Note that this assumes the firmware always fills in the requested data
in the CONFIG_RASPBERRYPI_FIRMWARE=y case.
Fixes: d45f1a563b ("staging: vc04_services: fix up rpi firmware functions")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Pull ARM SoC driver updates from Arnd Bergmann:
"The main addition this time around is the new ARM "SCMI" framework,
which is the latest in a series of standards coming from ARM to do
power management in a platform independent way.
This has been through many review cycles, and it relies on a rather
interesting way of using the mailbox subsystem, but in the end I
agreed that Sudeep's version was the best we could do after all.
Other changes include:
- the ARM CCN driver is moved out of drivers/bus into drivers/perf,
which makes more sense. Similarly, the performance monitoring
portion of the CCI driver are moved the same way and cleaned up a
little more.
- a series of updates to the SCPI framework
- support for the Mediatek mt7623a SoC in drivers/soc
- support for additional NVIDIA Tegra hardware in drivers/soc
- a new reset driver for Socionext Uniphier
- lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and
drivers/firmware and drivers/reset across platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
reset: uniphier: add ethernet reset control support for PXs3
reset: stm32mp1: Enable stm32mp1 reset driver
dt-bindings: reset: add STM32MP1 resets
reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control
reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency
reset: modify the way reset lookup works for board files
reset: add support for non-DT systems
clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove
firmware: arm_scmi: prevent accessing rate_discrete uninitialized
hwmon: (scmi) return -EINVAL when sensor information is unavailable
amlogic: meson-gx-socinfo: Update soc ids
soc/tegra: pmc: Use the new reset APIs to manage reset controllers
soc: mediatek: update power domain data of MT2712
dt-bindings: soc: update MT2712 power dt-bindings
cpufreq: scmi: add thermal dependency
soc: mediatek: fix the mistaken pointer accessed when subdomains are added
soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC
soc: mediatek: avoid hardcoded value with bus_prot_mask
dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding
dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC
...
Pull "firmware: Changes for v4.17-rc1" from Thierry Reding:
These changes are rather small, with just a fix for a return value check
and some preparatory work for Tegra194 BPMP support.
* tag 'tegra-for-4.17-firmware' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: adjust tested variable
firmware: tegra: Simplify channel management
Linux 4.16-rc5 merged into the GPIO devel branch to resolve
a nasty conflict between fixes and devel in the RCAR driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Tegra194 BPMP only implements 5 channels (4 to BPMP, 1 to CCPLEX),
and they are not placed contiguously in memory. The current channel
management in the BPMP driver does not support this.
Simplify and refactor the channel management such that only one atomic
transmit channel and one receive channel are supported, and channels
are not required to be placed contiguously in memory. The same
configuration also works on T186 so we end up with less code.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pull ARC fixes from Vineet Gupta:
- MCIP aka ARconnect fixes for SMP builds [Euginey]
- preventive fix for SLC (L2 cache) flushing [Euginey]
- Kconfig default fix [Ulf Magnusson]
- trailing semicolon fixes [Luis de Bethencourt]
- other assorted minor fixes
* tag 'arc-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: setup cpu possible mask according to possible-cpus dts property
ARC: mcip: update MCIP debug mask when the new cpu came online
ARC: mcip: halt GFRC counter when ARC cores halt
ARCv2: boot log: fix HS48 release number
arc: dts: use 'atmel' as manufacturer for at24 in axs10x_mb
ARC: Fix malformed ARC_EMUL_UNALIGNED default
ARC: boot log: Fix trailing semicolon
ARC: dw2 unwind: Fix trailing semicolon
ARC: Enable fatal signals on boot for dev platforms
ARCv2: Don't pretend we may set L-bit in STATUS32 with kflag instruction
ARCv2: cache: fix slc_entire_op: flush only instead of flush-n-inv
As of today we use hardcoded MCIP debug mask, so if we launch
kernel via debugger and kick fever cores than HW has all cpus
hang at the momemt of setup MCIP debug mask.
So update MCIP debug mask when the new cpu came online, instead of
use hardcoded MCIP debug mask.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
In SMP systems, GFRC is used for clocksource. However by default the
counter keeps running even when core is halted (say when debugging via a
JTAG debugger). This confuses Linux timekeeping and triggers flase RCU stall
splat such as below:
| [ARCLinux]# while true; do ./shm_open_23-1.run-test ; done
| Running with 1000 processes for 1000 objects
| hrtimer: interrupt took 485060 ns
|
| create_cnt: 1000
| Running with 1000 processes for 1000 objects
| [ARCLinux]# INFO: rcu_preempt self-detected stall on CPU
| 2-...: (1 GPs behind) idle=a01/1/0 softirq=135770/135773 fqs=0
| INFO: rcu_preempt detected stalls on CPUs/tasks:
| 0-...: (1 GPs behind) idle=71e/0/0 softirq=135264/135264 fqs=0
| 2-...: (1 GPs behind) idle=a01/1/0 softirq=135770/135773 fqs=0
| 3-...: (1 GPs behind) idle=4e0/0/0 softirq=134304/134304 fqs=0
| (detected by 1, t=13648 jiffies, g=31493, c=31492, q=1)
Starting from ARC HS v3.0 it's possible to tie GFRC to state of up-to 4
ARC cores with help of GFRC's CORE register where we set a mask for
cores which state we need to rely on.
We update cpu mask every time new cpu came online instead of using
hardcoded one or using mask generated from "possible_cpus" as we
want it set correctly even if we run kernel on HW which has fewer cores
than expected (or we launch kernel via debugger and kick fever cores
than HW has)
Note that GFRC halts when all cores have halted and thus relies on
programming of Inter-Core-dEbug register to halt all cores when one
halts.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: rewrote changelog]
