Initially, the cpu_cooling device for ARM was changed by adding a new
policy inserting idle cycles. The intel_powerclamp driver does a
similar action.
Instead of implementing idle injections privately in the cpu_cooling
device, move the idle injection code in a dedicated framework and give
the opportunity to other frameworks to make use of it.
The framework relies on the smpboot kthreads which handles via its
main loop the common code for hotplugging and [un]parking.
This code was previously tested with the cpu cooling device and went
through several iterations. It results now in split code and API
exported in the header file. It was tested with the cpu cooling device
with success.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Rewrite of all comments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
RAPL MSRs and handling for Cannon Lake are similar to Sky Lake
and Kaby Lake.
Signed-off-by: Joe Konno <joe.konno@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PL1 and PL2 could be throlled or de-throttled by
Thermal management to control SOC temperature.
However, currently, their value will be reset to default value
after once system suspend and resume.
Add pm_notifier to save PL1, PL2 before system suspect and restore
PL1, PL2 after system resume.
Signed-off-by: Zhen Han <zhen.han@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Simplify powercap_init() by reducing the number of redundant
assignments in it.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
[ rjw: Subject+changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fixes wrong bits shift operation in the rapl_write_data_raw function, which
might cause overridding bits outside of the mask.
For example, writing new TIME_WINDOW1 value can override POWER_LIMIT1.
Signed-off-by: Adam Lessnau <adam.lessnau@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the current code we accidentally return the successful result from
idr_alloc() instead of a negative error pointer. The caller is looking
for an error pointer and so it treats the returned value as a valid
pointer.
This one might be a bit serious because if it lets people get around the
kernel's protection for remapping NULL. I'm not sure.
Fixes: 75d2364ea0 (PowerCap: Add class driver)
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit e1399ba20e ("powercap / RAPL: handle missing MSRs") added
contraint_to_pl() function to return index into an array. But it
can potentially return -EINVAL if powercap layer sends an out of
range constraint ID. This patch adds sanity check.
Unnecessary RAPL domain pointer check is removed since it must be
initialized before calling rapl_unit_xlate().
Fixes: e1399ba20e ("powercap / RAPL: handle missing MSRs")
Reported-by: Odzioba, Lukasz <lukasz.odzioba@intel.com>
Reported-by: Koss, Marcin <marcin.koss@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ability of the CPU hotplug code to stop online/offline at each step
makes it necessary to track the activated CPUs in a package directly,
because outerwise a CPU offline callback can find CPUs which have already
executed the offline callback, but are not yet marked offline in the
topology mask. That could make such a CPU the package leader and in case
that CPU goes fully offline leave the package lead orphaned.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The whole init/exit code is a duplicate of the cpuhotplug code. So we can
just let the hotplug code do the actual work of setting up and tearing down
the domains.
This also restores the package hardware when a package is removed during
hotplug instead of leaving it in the last configured state and only reset
it when the driver is removed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Install the callbacks via the state machine as a first step. The init/exit
code is a duplicate of the hotplug code. This is cleaned up in a
consecutive patch.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If rapl_package_register_powercap() fails in rapl_add_package() the
function happily returns 0.
Capture the error code and propagate it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The domain data of packages is only updated at init time, but new packages
created by hotplug miss that treatment.
Add it there and remove the global update at init time, because it's now
obsolete.
The more interesting question is why rapl_update_domain_data() exists at
all as nothing ever uses that data.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It's confirmed that RAPL works as expected on Ivy Bridge servers.
Tested against processor: Intel(R) Xeon(R) CPU E5-2697 v2 @2.70GHz
Signed-off-by: Xiaolong Wang <xiaolong.wang@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some RAPL MSRs may not exist on some CPUs, we need to continue
the topology detection and enumerate what is available.
This patch handles the missing MSRs, then reports to the powercap
layer only the features available.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since the RAPL interface is not architectual, its enumeration depends
on poking MSRs instead of using the CPUID method.
In KVM guests, the RAPL driver probe will fail and emit the following
message for every CPU: "no valid rapl domains found in package"
This patch converts the warning to a debug message only (still return
-ENODEV so that RAPL does not run in KVM guests).
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
