This patch allows the device features to be provisioned through
netlink. A new attribute is introduced to allow the userspace to pass
a 64bit device features during device adding.
This provides several advantages:
- Allow to provision a subset of the features to ease the cross vendor
live migration.
- Better debug-ability for vDPA framework and parent.
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220927074810.28627-2-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
this patch is to add the support for vdpa tool in vp_vdpa
here is the example steps
modprobe vp_vdpa
modprobe vhost_vdpa
echo 0000:00:06.0>/sys/bus/pci/drivers/virtio-pci/unbind
echo 1af4 1041 > /sys/bus/pci/drivers/vp-vdpa/new_id
vdpa dev add name vdpa1 mgmtdev pci/0000:00:06.0
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20220429091030.547434-1-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This patches introduces the multiple address spaces support for vDPA
device. This idea is to identify a specific address space via an
dedicated identifier - ASID.
During vDPA device allocation, vDPA device driver needs to report the
number of address spaces supported by the device then the DMA mapping
ops of the vDPA device needs to be extended to support ASID.
This helps to isolate the environments for the virtqueue that will not
be assigned directly. E.g in the case of virtio-net, the control
virtqueue will not be assigned directly to guest.
As a start, simply claim 1 virtqueue groups and 1 address spaces for
all vDPA devices. And vhost-vDPA will simply reject the device with
more than 1 virtqueue groups or address spaces.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-7-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces virtqueue groups to vDPA device. The virtqueue
group is the minimal set of virtqueues that must share an address
space. And the address space identifier could only be attached to
a specific virtqueue group.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-6-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allows to read vendor statistics of a vdpa device. The specific
statistics data are received from the upstream driver in the form of an
(attribute name, attribute value) pairs.
An example of statistics for mlx5_vdpa device are:
received_desc - number of descriptors received by the virtqueue
completed_desc - number of descriptors completed by the virtqueue
A descriptor using indirect buffers is still counted as 1. In addition,
N chained descriptors are counted correctly N times as one would expect.
A new callback was added to vdpa_config_ops which provides the means for
the vdpa driver to return statistics results.
The interface allows for reading all the supported virtqueues, including
the control virtqueue if it exists.
Below are some examples taken from mlx5_vdpa which are introduced in the
following patch:
1. Read statistics for the virtqueue at index 1
$ vdpa dev vstats show vdpa-a qidx 1
vdpa-a:
queue_type tx queue_index 1 received_desc 3844836 completed_desc 3844836
2. Read statistics for the virtqueue at index 32
$ vdpa dev vstats show vdpa-a qidx 32
vdpa-a:
queue_type control_vq queue_index 32 received_desc 62 completed_desc 62
3. Read statisitics for the virtqueue at index 0 with json output
$ vdpa -j dev vstats show vdpa-a qidx 0
{"vstats":{"vdpa-a":{
"queue_type":"rx","queue_index":0,"name":"received_desc","value":417776,\
"name":"completed_desc","value":417548}}}
4. Read statistics for the virtqueue at index 0 with preety json output
$ vdpa -jp dev vstats show vdpa-a qidx 0
{
"vstats": {
"vdpa-a": {
"queue_type": "rx",
"queue_index": 0,
"name": "received_desc",
"value": 417776,
"name": "completed_desc",
"value": 417548
}
}
}
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220518133804.1075129-3-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add max_supported_vqs and supported_features fields to struct
vdpa_mgmt_dev. Upstream drivers need to feel these values according to
the device capabilities.
These values are reported back in a netlink message when showing management
devices.
Examples:
$ auxiliary/mlx5_core.sf.1:
supported_classes net
max_supported_vqs 257
dev_features CSUM GUEST_CSUM MTU HOST_TSO4 HOST_TSO6 STATUS CTRL_VQ MQ \
CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
$ vdpa -j mgmtdev show
{"mgmtdev":{"auxiliary/mlx5_core.sf.1":{"supported_classes":["net"], \
"max_supported_vqs":257,"dev_features":["CSUM","GUEST_CSUM","MTU", \
"HOST_TSO4","HOST_TSO6","STATUS","CTRL_VQ","MQ","CTRL_MAC_ADDR", \
"VERSION_1","ACCESS_PLATFORM"]}}}
$ vdpa -jp mgmtdev show
{
"mgmtdev": {
"auxiliary/mlx5_core.sf.1": {
"supported_classes": [ "net" ],
"max_supported_vqs": 257,
"dev_features": ["CSUM","GUEST_CSUM","MTU","HOST_TSO4", \
"HOST_TSO6","STATUS","CTRL_VQ","MQ", \
"CTRL_MAC_ADDR","VERSION_1","ACCESS_PLATFORM"]
}
}
}
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-11-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu<si-wei.liu@oracle.com>
Add netlink support to configure the max virtqueue pairs for a device.
At least one pair is required. The maximum is dictated by the device.
Example:
$ vdpa dev add name vdpa-a mgmtdev auxiliary/mlx5_core.sf.1 max_vqp 4
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-6-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide an interface to read the negotiated features. This is needed
when building the netlink message in vdpa_dev_net_config_fill().
Also fix the implementation of vdpa_dev_net_config_fill() to use the
negotiated features instead of the device features.
To make APIs clearer, make the following name changes to struct
vdpa_config_ops so they better describe their operations:
get_features -> get_device_features
set_features -> set_driver_features
Finally, add get_driver_features to return the negotiated features and
add implementation to all the upstream drivers.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-2-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
`driver_override` allows to control which of the vDPA bus drivers
binds to a vDPA device.
If `driver_override` is not set, the previous behaviour is followed:
devices use the first vDPA bus driver loaded (unless auto binding
is disabled).
Tested on Fedora 34 with driverctl(8):
$ modprobe virtio-vdpa
$ modprobe vhost-vdpa
$ modprobe vdpa-sim-net
$ vdpa dev add mgmtdev vdpasim_net name dev1
# dev1 is attached to the first vDPA bus driver loaded
$ driverctl -b vdpa list-devices
dev1 virtio_vdpa
$ driverctl -b vdpa set-override dev1 vhost_vdpa
$ driverctl -b vdpa list-devices
dev1 vhost_vdpa [*]
Note: driverctl(8) integrates with udev so the binding is
preserved.
Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211126164753.181829-3-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
$ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000
$ vdpa dev config show
bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000
$ vdpa dev config show -jp
{
"config": {
"bar": {
"mac": "00:11:22:33:44:55",
"link ": "up",
"link_announce ": false,
"mtu": 9000,
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-5-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Introduce a command to query a device config layout.
An example query of network vdpa device:
$ vdpa dev add name bar mgmtdev vdpasim_net
$ vdpa dev config show
bar: mac 00:35:09:19:48:05 link up link_announce false mtu 1500
$ vdpa dev config show -jp
{
"config": {
"bar": {
"mac": "00:35:09:19:48:05",
"link ": "up",
"link_announce ": false,
"mtu": 1500,
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-3-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Subsequent patches enable get and set configuration either
via management device or via vdpa device' config ops.
This requires synchronization between multiple callers to get and set
config callbacks. Features setting also influence the layout of the
configuration fields endianness.
To avoid exposing synchronization primitives to callers, introduce
helper for setting the configuration and use it.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-2-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
