Pull power management updates from Rafael Wysocki:
"These are mostly minor improvements all over including new CPU IDs for
the Intel RAPL driver, an Energy Model rework to use micro-Watt as the
power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq
updates, documentation cleanups and a new version of the pm-graph
suite of utilities.
Specifics:
- Make cpufreq_show_cpus() more straightforward (Viresh Kumar).
- Drop unnecessary CPU hotplug locking from store() used by cpufreq
sysfs attributes (Viresh Kumar).
- Make the ACPI cpufreq driver support the boost control interface on
Zhaoxin/Centaur processors (Tony W Wang-oc).
- Print a warning message on attempts to free an active cpufreq
policy which should never happen (Viresh Kumar).
- Fix grammar in the Kconfig help text for the loongson2 cpufreq
driver (Randy Dunlap).
- Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
governor (Zhao Liu).
- Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
cpuidle driver (Eiichi Tsukata).
- Modify intel_idle to treat C1 and C1E as independent idle states on
Sapphire Rapids (Artem Bityutskiy).
- Extend support for wakeirq to callback wrappers used during system
suspend and resume (Ulf Hansson).
- Defer waiting for device probe before loading a hibernation image
till the first actual device access to avoid possible deadlocks
reported by syzbot (Tetsuo Handa).
- Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
Helgaas).
- Add Raptor Lake-P to the list of processors supported by the Intel
RAPL driver (George D Sworo).
- Add Alder Lake-N and Raptor Lake-P to the list of processors for
which Power Limit4 is supported in the Intel RAPL driver (Sumeet
Pawnikar).
- Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
attempting to remove it (Hsin-Yi Wang).
- Change the Energy Model code to represent power in micro-Watts and
adjust its users accordingly (Lukasz Luba).
- Add new devfreq driver for Mediatek CCI (Cache Coherent
Interconnect) (Johnson Wang).
- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c (Krzysztof Kozlowski).
- Address kernel-doc warnings by adding the description for unused
function parameters in devfreq core (Mauro Carvalho Chehab).
- Use NULL to pass a null pointer rather than zero according to the
function propotype in imx-bus.c (Colin Ian King).
- Print error message instead of error interger value in
tegra30-devfreq.c (Dmitry Osipenko).
- Add checks to prevent setting negative frequency QoS limits for
CPUs (Shivnandan Kumar).
- Update the pm-graph suite of utilities to the latest revision 5.9
including multiple improvements (Todd Brandt).
- Drop pme_interrupt reference from the PCI power management
documentation (Mario Limonciello)"
* tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
PM: QoS: Add check to make sure CPU freq is non-negative
PM: hibernate: defer device probing when resuming from hibernation
intel_idle: make SPR C1 and C1E be independent
cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask
cpufreq: loongson2: fix Kconfig "its" grammar
pm-graph v5.9
cpufreq: Warn users while freeing active policy
cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
firmware: arm_scmi: Get detailed power scale from perf
Documentation: EM: Switch to micro-Watts scale
PM: EM: convert power field to micro-Watts precision and align drivers
PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
PM / devfreq: shut up kernel-doc warnings
dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
dt-bindings: interconnect: Add MediaTek CCI dt-bindings
PM: domains: Ensure genpd_debugfs_dir exists before remove
PM: runtime: Extend support for wakeirq for force_suspend|resume
...
In SCMI v3.1 the power scale can be in micro-Watts. The upper layers, e.g.
cpufreq and EM should handle received power values properly (upscale when
needed). Thus, provide an interface which allows to check what is the
scale for power values. The old interface allowed to distinguish between
bogo-Watts and milli-Watts only (which was good for older SCMI spec).
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a method to get hold of a protocol, causing it to be initialized and
its resource accounting updated, without getting access to its operations
and handle.
Some protocols, like SCMI SystemPower, do not expose any protocol ops to
the kernel OSPM agent but still need to be at least initialized. This
helper avoids the need to invoke a full devm_get_protocol() only to get
the protocol initialized while throwing away unused the protocol ops and
handle.
Link: https://lore.kernel.org/r/20220704101933.2981635-4-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Commit b260fccaeb ("firmware: arm_scmi: Add SCMI v3.1 protocol extended
names support") moved all the name string buffers to use the extended buffer
size of 64 instead of the required 16 bytes. While that should be fine if
the firmware terminates the string before 16 bytes, there is possibility
of copying random data if the name is not NULL terminated by the firmware.
SCMI base protocol agent_name/vendor_id/sub_vendor_id are defined by the
specification as NULL-terminated ASCII strings up to 16-bytes in length.
The underlying buffers and message descriptors are currently bigger than
needed; resize them to fit only the strictly needed 16 bytes to avoid
any possible leaks when reading data from the firmware.
Change the size argument of strlcpy to use SCMI_SHORT_NAME_MAX_SIZE always
when dealing with short domain names, so as to limit the possibility that
an ill-formed non-NULL terminated short reply from the SCMI platform
firmware can leak stale content laying in the underlying transport shared
memory area.
While at that, convert all strings handling routines to use the preferred
strscpy.
Link: https://lore.kernel.org/r/20220608095530.497879-1-cristian.marussi@arm.com
Fixes: b260fccaeb ("firmware: arm_scmi: Add SCMI v3.1 protocol extended names support")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add SCMI v3.1 voltage protocol support for asynchronous VOLTAGE_LEVEL_SET
command.
Note that, if a voltage domain is advertised to support the asynchronous
version of VOLTAGE_LEVEL_SET, the command will be issued asynchronously
unless explicitly requested to use the synchronous version by setting the
mode to SCMI_VOLTAGE_LEVEL_SET_SYNC when calling voltage_ops->level_set.
The SCMI regulator driver level_set invocation has been left unchanged
so that it will transparently use the asynchronous version if available.
Link: https://lore.kernel.org/r/20220330150551.2573938-21-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
An SCMI agent can be configured system-wide with a well-defined atomic
threshold: only SCMI synchronous command whose latency has been advertised
by the SCMI platform to be lower or equal to this configured threshold will
be considered for atomic operations, when requested and if supported by the
underlying transport at all.
Link: https://lore.kernel.org/r/20220217131234.50328-6-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
An SCMI transport can be configured as .atomic_enabled in order to signal
to the SCMI core that all its TX path is executed in atomic context and
that, when requested, polling mode should be used while waiting for command
responses.
When a specific platform configuration had properly configured such a
transport as .atomic_enabled, the SCMI core will also take care not to
sleep in the corresponding RX path while waiting for a response if that
specific command transaction was requested as atomic using polling mode.
Asynchronous commands should not be used in an atomic context and so a
warning is emitted if polling was requested for an asynchronous command.
Add also a method to check, from the SCMI drivers, if the underlying SCMI
transport is currently configured to support atomic transactions: this will
be used by upper layers to determine if atomic requests can be supported at
all on this SCMI instance.
Link: https://lore.kernel.org/r/20211220195646.44498-7-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Kernel doc validation script is unhappy and complains with the below set
of warnings.
| Function parameter or member 'fast_switch_possible' not described in 'scmi_perf_proto_ops'
| Function parameter or member 'power_scale_mw_get' not described in 'scmi_perf_proto_ops'
| cannot understand function prototype: 'struct scmi_sensor_reading '
| cannot understand function prototype: 'struct scmi_range_attrs '
| cannot understand function prototype: 'struct scmi_sensor_axis_info '
| cannot understand function prototype: 'struct scmi_sensor_intervals_info '
Fix them adding appropriate documents or missing keywords.
Link: https://lore.kernel.org/r/20210712130801.2436492-2-sudeep.holla@arm.com
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
