inode_lock[ATOMIC_FILE] was used for protecting sbi->atomic_files,
update atomic_files variable's type to atomic_t instead of unsigned
int, then inode_lock[ATOMIC_FILE] can be obsoleted.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
ERROR: code indent should use tabs where possible
ERROR: spaces required around that ':'
ERROR: incorrect tab
Found serveral code type errors when review the code and fix it.
There is no function change.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes counting unusable blocks set by zone capacity when
checking the valid block count in a section.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Current atomic write has three major issues like below.
- keeps the updates in non-reclaimable memory space and they are even
hard to be migrated, which is not good for contiguous memory
allocation.
- disk spaces used for atomic files cannot be garbage collected, so
this makes it difficult for the filesystem to be defragmented.
- If atomic write operations hit the threshold of either memory usage
or garbage collection failure count, All the atomic write operations
will fail immediately.
To resolve the issues, I will keep a COW inode internally for all the
updates to be flushed from memory, when we need to flush them out in a
situation like high memory pressure. These COW inodes will be tagged
as orphan inodes to be reclaimed in case of sudden power-cut or system
failure during atomic writes.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We need a mid level of gc urgent mode to do GC forcibly in a period
of given gc_urgent_sleep_time, but not like using greedy GC approach
and switching to SSR mode such as gc urgent high mode. This can be
used for more aggressive periodic storage clean up.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This adds a sysfs entry to call checkpoint during fsync() in order to avoid
long elapsed time to run roll-forward recovery when booting the device.
Default value doesn't enforce the limitation which is same as before.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
To fix:
WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Do not use numbers but strings to improve readability when flag is set.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We need to get sbi->s_flag to understand the current f2fs status as well.
One example is SBI_NEED_FSCK.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Added gc_reclaimed_segments and gc_segment_mode sysfs nodes.
1) "gc_reclaimed_segments" shows how many segments have been
reclaimed by GC during a specific GC mode.
2) "gc_segment_mode" is used to control for which gc mode
the "gc_reclaimed_segments" node shows.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Support to use address space of inner inode to cache compressed block,
in order to improve cache hit ratio of random read.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch combined the below three clean-up patches.
- modify open brace '{' following function definitions
- ERROR: spaces required around that ':'
- ERROR: spaces required before the open parenthesis '('
- ERROR: spaces prohibited before that ','
- Made suggested modifications from checkpatch in reference to WARNING:
Missing a blank line after declarations
Signed-off-by: Yi Zhuang <zhuangyi1@huawei.com>
Signed-off-by: Jia Yang <jiayang5@huawei.com>
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge",
which creates a kernel daemon and makes it to merge concurrent checkpoint
requests as much as possible to eliminate redundant checkpoint issues. Plus,
we can eliminate the sluggish issue caused by slow checkpoint operation
when the checkpoint is done in a process context in a cgroup having
low i/o budget and cpu shares. To make this do better, we set the
default i/o priority of the kernel daemon to "3", to give one higher
priority than other kernel threads. The below verification result
explains this.
The basic idea has come from https://opensource.samsung.com.
[Verification]
Android Pixel Device(ARM64, 7GB RAM, 256GB UFS)
Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20)
Set "strict_guarantees" to "1" in BFQ tunables
In "fg" cgroup,
- thread A => trigger 1000 checkpoint operations
"for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1;
done"
- thread B => gererating async. I/O
"fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1
--filename=test_img --name=test"
In "bg" cgroup,
- thread C => trigger repeated checkpoint operations
"echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file;
fsync test_dir2; done"
We've measured thread A's execution time.
[ w/o patch ]
Elapsed Time: Avg. 68 seconds
[ w/ patch ]
Elapsed Time: Avg. 48 seconds
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
[Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan]
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After commit 0b6d4ca04a ("f2fs: don't return vmalloc() memory from
f2fs_kmalloc()"), f2fs_k{m,z}alloc() will not return vmalloc()'ed
memory, so clean up to use kfree() instead of kvfree() to free
vmalloc()'ed memory.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Current compr_blocks of superblock info is not 64bit value. We are
accumulating each i_compr_blocks count of inodes to this value and
those are 64bit values. So, need to change this to 64bit value.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are several issues in current background GC algorithm:
- valid blocks is one of key factors during cost overhead calculation,
so if segment has less valid block, however even its age is young or
it locates hot segment, CB algorithm will still choose the segment as
victim, it's not appropriate.
- GCed data/node will go to existing logs, no matter in-there datas'
update frequency is the same or not, it may mix hot and cold data
again.
- GC alloctor mainly use LFS type segment, it will cost free segment
more quickly.
This patch introduces a new algorithm named age threshold based
garbage collection to solve above issues, there are three steps
mainly:
1. select a source victim:
- set an age threshold, and select candidates beased threshold:
e.g.
0 means youngest, 100 means oldest, if we set age threshold to 80
then select dirty segments which has age in range of [80, 100] as
candiddates;
- set candidate_ratio threshold, and select candidates based the
ratio, so that we can shrink candidates to those oldest segments;
- select target segment with fewest valid blocks in order to
migrate blocks with minimum cost;
2. select a target victim:
- select candidates beased age threshold;
- set candidate_radius threshold, search candidates whose age is
around source victims, searching radius should less than the
radius threshold.
- select target segment with most valid blocks in order to avoid
migrating current target segment.
3. merge valid blocks from source victim into target victim with
SSR alloctor.
Test steps:
- create 160 dirty segments:
* half of them have 128 valid blocks per segment
* left of them have 384 valid blocks per segment
- run background GC
Benefit: GC count and block movement count both decrease obviously:
- Before:
- Valid: 86
- Dirty: 1
- Prefree: 11
- Free: 6001 (6001)
GC calls: 162 (BG: 220)
- data segments : 160 (160)
- node segments : 2 (2)
Try to move 41454 blocks (BG: 41454)
- data blocks : 40960 (40960)
- node blocks : 494 (494)
IPU: 0 blocks
SSR: 0 blocks in 0 segments
LFS: 41364 blocks in 81 segments
- After:
- Valid: 87
- Dirty: 0
- Prefree: 4
- Free: 6008 (6008)
GC calls: 75 (BG: 76)
- data segments : 74 (74)
- node segments : 1 (1)
Try to move 12813 blocks (BG: 12813)
- data blocks : 12544 (12544)
- node blocks : 269 (269)
IPU: 0 blocks
SSR: 12032 blocks in 77 segments
LFS: 855 blocks in 2 segments
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previous implementation of aligned pinfile allocation will:
- allocate new segment on cold data log no matter whether last used
segment is partially used or not, it makes IOs more random;
- force concurrent cold data/GCed IO going into warm data area, it
can make a bad effect on hot/cold data separation;
In this patch, we introduce a new type of log named 'inmem curseg',
the differents from normal curseg is:
- it reuses existed segment type (CURSEG_XXX_NODE/DATA);
- it only exists in memory, its segno, blkofs, summary will not b
persisted into checkpoint area;
With this new feature, we can enhance scalability of log, special
allocators can be created for purposes:
- pure lfs allocator for aligned pinfile allocation or file
defragmentation
- pure ssr allocator for later feature
So that, let's update aligned pinfile allocation to use this new
inmem curseg fwk.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently f2fs stats are only available from /d/f2fs/status. This patch
adds some of the f2fs stats to sysfs so that they are accessible even
when debugfs is not mounted.
The following sysfs nodes are added:
-/sys/fs/f2fs/<disk>/free_segments
-/sys/fs/f2fs/<disk>/cp_foreground_calls
-/sys/fs/f2fs/<disk>/cp_background_calls
-/sys/fs/f2fs/<disk>/gc_foreground_calls
-/sys/fs/f2fs/<disk>/gc_background_calls
-/sys/fs/f2fs/<disk>/moved_blocks_foreground
-/sys/fs/f2fs/<disk>/moved_blocks_background
-/sys/fs/f2fs/<disk>/avg_vblocks
Signed-off-by: Hridya Valsaraju <hridya@google.com>
[Jaegeuk Kim: allow STAT_FS without DEBUG_FS]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>