Today remove callbacks of platform devices return an int. This is unfortunate
because the device core ignores the return value and so the platform code only
emits a warning (and still removes the device).
The longterm quest is to make these remove callbacks return void instead.
This series is a preparation for that, with the goal to make the remove
callbacks obviously always return 0. This way when the prototype of
these functions is changed to return void, the change is straight
forward and easy to review.
Link: https://lore.kernel.org/r/20220718121409.171773-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
icc_provider_del() already emits an error message on failure. In this
case letting .remove() return the corresponding error code results in
another error message and the device is removed anyhow. (See
platform_remove().)
So ignore the return value of icc_provider_del() and return 0
unconditionally.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220718121409.171773-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
icc_provider_del() already emits an error message on failure. In this
case letting .remove() return the corresponding error code results in
another error message and the device is removed anyhow. (See
platform_remove().)
So ignore the return value of icc_provider_del() and return 0
unconditionally.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220718121409.171773-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
icc_provider_del() already emits an error message on failure. In this
case letting .remove() return the corresponding error code results in
another error message and the device is removed anyhow. (See
platform_remove().)
So ignore the return value of icc_provider_del() and return 0
unconditionally.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220718121409.171773-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
icc_provider_del() already emits an error message on failure. In this
case letting .remove() return the corresponding error code results in
another error message and the device is removed anyhow. (See
platform_remove().)
So ignore the return value of icc_provider_del() and return 0
unconditionally.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220718121409.171773-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
icc_provider_del() already emits an error message on failure. In this
case letting .remove() return the corresponding error code results in
another error message and the device is removed anyhow. (See
platform_remove().)
So ignore the return value of icc_provider_del() and return 0
unconditionally.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220718121409.171773-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
icc_provider_del() already emits an error message on failure. In this
case letting .remove() return the corresponding error code results in
another error message and the device is removed anyhow. (See
platform_remove().)
So ignore the return value of icc_provider_del() and return 0
unconditionally.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220718121409.171773-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This patch set is to support bucket in icc-rpm driver, so it implements
the similar mechanism in the icc-rpmh driver.
It uses interconnect path tag to indicate the bandwidth voting is for
which buckets, and there have three kinds of buckets: AWC, WAKE and
SLEEP, finally the wake and sleep bucket values are used to set the
corresponding clock (active and sleep clocks). So far, we keep the AWC
bucket but doesn't really use it.
Link: https://lore.kernel.org/r/20220712015929.2789881-1-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This patchset is to support i.MX8MP NoC settings, i.MX8MP NoC initial
value after power up is invalid, need set a valid value after related
power domain up.
This patchset also includes two patch[1,2] during my development to enable
the ICC feature for i.MX8MP.
I not include ddrc DVFS in this patchset, ths patchset is only to
support NoC value mode/priority/ext_control being set to a valid value
that suggested by i.MX Chip Design Team. The value is same as NXP
downstream one inside Arm Trusted Firmware:
https://source.codeaurora.org/external/imx/imx-atf/tree/plat/imx/imx8m/i/gpc.c?h=lf_v2.4#n97
Link: https://lore.kernel.org/r/20220703091132.1412063-1-peng.fan@oss.nxp.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This commit uses buckets for support bandwidth and clock rates. It
introduces a new function qcom_icc_bus_aggregate() to calculate the
aggregate average and peak bandwidths for every bucket, and also it
calculates the maximum value of aggregated average bandwidth across all
buckets.
The maximum aggregated average is used to calculate the final bandwidth
requests. And we can set the clock rate per bucket, we use SLEEP bucket
as default bucket if a platform doesn't enable the interconnect path
tags in DT binding; otherwise, we use WAKE bucket to set active clock
and use SLEEP bucket for other clocks. So far we don't use AMC bucket.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220712015929.2789881-6-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect rpm driver uses a single aggregate bandwidth to
calculate the clock rates for both active and sleep clocks; therefore,
it has no chance to separate bandwidth requests for these two kinds of
clocks.
This patch studies the implementation from interconnect rpmh driver to
support multiple buckets. The rpmh driver provides three buckets for
AMC, WAKE, and SLEEP; this driver only needs to use WAKE and SLEEP
buckets, but we keep the same way with rpmh driver, this can allow us to
reuse the DT binding and avoid to define duplicated data structures.
This patch introduces two callbacks: qcom_icc_pre_bw_aggregate() is used
to clean up bucket values before aggregate bandwidth requests, and
qcom_icc_bw_aggregate() is to aggregate bandwidth for buckets.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220712015929.2789881-5-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
