93e163a9e0
drm/bridge: imx: Add i.MX8qm/qxp pixel combiner support
...
This patch adds a drm bridge driver for i.MX8qm/qxp pixel combiner.
The pixel combiner takes two output streams from a single display
controller and manipulates the two streams to support a number
of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured
as either one screen, two screens, or virtual screens. The pixel
combiner is also responsible for generating some of the control signals
for the pixel link output channel. For now, the driver only supports
the bypass mode.
Reviewed-by: Robert Foss <robert.foss@linaro.org >
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com > # Colibri iMX8X, LT170410-2WHC, LP156WF1
Signed-off-by: Liu Ying <victor.liu@nxp.com >
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com >
Signed-off-by: Robert Foss <robert.foss@linaro.org >
Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-5-victor.liu@nxp.com
2022-06-20 21:15:07 +02:00
6352cd451d
drm: bridge: Add TI DLPC3433 DSI to DMD bridge
...
TI DLPC3433 is a MIPI DSI based display controller bridge
for processing high resolution DMD based projectors.
It has a flexible configuration of MIPI DSI and DPI signal
input that produces a DMD output in RGB565, RGB666, RGB888
formats.
It supports upto 720p resolution with 60 and 120 Hz refresh
rates.
Add bridge driver for it.
Signed-off-by: Christopher Vollo <chris@renewoutreach.org >
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com >
Signed-off-by: Robert Foss <robert.foss@linaro.org >
Link: https://patchwork.freedesktop.org/patch/msgid/20220603140349.3563612-2-jagan@amarulasolutions.com
2022-06-03 16:23:31 +02:00
463db5c2ed
drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge
...
The i.MX8MP contains two syscon registers which are responsible
for configuring the on-SoC DPI-to-LVDS serializer. Implement a
simple bridge driver for this serializer.
--
- Add sentinel of_device_table
- Add RB from Sam
- Rename to fsl-ldb altogether
Reviewed-by: Sam Ravnborg <sam@ravnborg.org >
Signed-off-by: Marek Vasut <marex@denx.de >
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com >
Cc: Lucas Stach <l.stach@pengutronix.de >
Cc: Maxime Ripard <maxime@cerno.tech >
Cc: Peng Fan <peng.fan@nxp.com >
Cc: Robby Cai <robby.cai@nxp.com >
Cc: Robert Foss <robert.foss@linaro.org >
Cc: Sam Ravnborg <sam@ravnborg.org >
Cc: Thomas Zimmermann <tzimmermann@suse.de >
To: dri-devel@lists.freedesktop.org
V2: - Rename syscon to fsl,syscon
V3: - Consistently use MX8MP
V4: - Fix MODULE_DESCRIPTION to also use MX8MP
Signed-off-by: Robert Foss <robert.foss@linaro.org >
Link: https://patchwork.freedesktop.org/patch/msgid/20220426193645.244792-2-marex@denx.de
2022-05-02 16:44:55 +02:00
8ce4129e3d
drm/bridge: lt9211: Add Lontium LT9211 bridge driver
...
Add driver for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI to
Single-link/Dual-Link DSI/LVDS or Single DPI bridge. This chip is highly
capable at converting formats, but sadly it is also highly undocumented.
This driver is written without any documentation from Lontium and based
only on shreds of information available in various obscure example codes,
hence long runs of unknown register patches and lengthy delays in various
places. Whichever register meaning could be divined from its behavior has
at least a comment around it.
Currently the only mode tested is Single-link DSI to Single-link LVDS.
Dual-link LVDS might work as well, the register programming is in place,
but is untested.
Reviewed-by: Robert Foss <robert.foss@linaro.org >
Signed-off-by: Marek Vasut <marex@denx.de >
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com >
Cc: Lucas Stach <l.stach@pengutronix.de >
Cc: Maxime Ripard <maxime@cerno.tech >
Cc: Robert Foss <robert.foss@linaro.org >
Cc: Sam Ravnborg <sam@ravnborg.org >
Cc: Thomas Zimmermann <tzimmermann@suse.de >
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org >
Link: https://patchwork.freedesktop.org/patch/msgid/20220419143958.94873-2-marex@denx.de
2022-04-19 16:47:38 +02:00
b5c84a9edc
drm/bridge: add it6505 driver
...
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen <allen.chen@ite.com.tw >
Tested-by: Hsin-yi Wang <hsinyi@chromium.org >
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw >
Signed-off-by: Allen Chen <allen.chen@ite.com.tw >
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com >
Signed-off-by: Robert Foss <robert.foss@linaro.org >
Link: https://patchwork.freedesktop.org/patch/msgid/20220114091502.333083-1-allen.chen@ite.com.tw
2022-02-01 11:20:21 +01:00
ceb515ba29
drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver
...
Add driver for TI SN65DSI83 Single-link DSI to Single-link LVDS bridge
and TI SN65DSI84 Single-link DSI to Dual-link or 2x Single-link LVDS
bridge. TI SN65DSI85 is unsupported due to lack of hardware to test on,
but easy to add.
The driver operates the chip via I2C bus. Currently the LVDS clock are
always derived from DSI clock lane, which is the usual mode of operation.
Support for clock from external oscillator is not implemented, but it is
easy to add if ever needed. Only RGB888 pixel format is implemented, the
LVDS666 is not supported, but could be added if needed.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org >
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de >
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de >
Tested-by: Adam Ford <aford173@gmail.com >
Signed-off-by: Marek Vasut <marex@denx.de >
Cc: Douglas Anderson <dianders@chromium.org >
Cc: Jagan Teki <jagan@amarulasolutions.com >
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com >
Cc: Linus Walleij <linus.walleij@linaro.org >
Cc: Loic Poulain <loic.poulain@linaro.org >
Cc: Philippe Schenker <philippe.schenker@toradex.com >
Cc: Sam Ravnborg <sam@ravnborg.org >
Cc: Stephen Boyd <swboyd@chromium.org >
Cc: Valentin Raevsky <valentin@compulab.co.il >
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org >
Link: https://patchwork.freedesktop.org/patch/msgid/20210607174258.16300-2-marex@denx.de
2021-06-08 11:42:25 +02:00
44602b10d7
drm/bridge: Add ChromeOS EC ANX7688 bridge driver support
...
This driver adds support for the ChromeOS EC ANX7688 HDMI to DP converter
For our use case, the only reason the Linux kernel driver is necessary is
to reject resolutions that require more bandwidth than what is available
on the DP side. DP bandwidth and lane count are reported by the bridge via
2 registers and, as far as we know, only chips that have a firmware
version greater than 0.85 support these two registers.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org >
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org >
[The driver is OF only so should depends on CONFIG_OF]
Reported-by: kbuild test robot <lkp@intel.com >
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com >
[convert to i2c driver, rename to cros_ec_anx7688, add err checks]
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com >
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com >
Signed-off-by: Robert Foss <robert.foss@linaro.org >
Link: https://patchwork.freedesktop.org/patch/msgid/20210518141927.24795-3-dafna.hirschfeld@collabora.com
2021-05-18 16:41:01 +02:00
988156dc2f
drm: bridge: add it66121 driver
...
This commit is a simple driver for bridge HMDI it66121.
The input format is RBG and there is no color conversion.
Audio, HDCP and CEC are not supported yet.
Signed-off-by: Phong LE <ple@baylibre.com >
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com >
Reviewed-by: Robert Foss <robert.foss@linaro.org >
Link: https://patchwork.freedesktop.org/patch/msgid/20210419071223.2673533-3-narmstrong@baylibre.com
2021-04-21 13:51:29 +02:00
30e2ae943c
drm/bridge: Introduce LT8912B DSI to HDMI bridge
...
Lontium LT8912B is a DSI to HDMI bridge.
Reported-by: kernel test robot <lkp@intel.com >
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com >
Reviewed-by: Robert Foss <robert.foss@linaro.org >
Signed-off-by: Robert Foss <robert.foss@linaro.org >
Link: https://patchwork.freedesktop.org/patch/msgid/20210326121955.1266230-3-adrien.grassein@gmail.com
2021-03-26 15:40:20 +01:00
ce517f1894
drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge
...
ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and
produce RGB565, RGB666, RGB888 output format.
Add bridge driver for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com >
Reviewed-by: Robert Foss <robert.foss@linaro.org >
Signed-off-by: Robert Foss <robert.foss@linaro.org >
Link: https://patchwork.freedesktop.org/patch/msgid/20210322103328.66442-2-jagan@amarulasolutions.com
2021-03-25 17:46:08 +01:00
0cbbd5b1a0
drm: bridge: add support for lontium LT9611UXC bridge
...
Add support for Lontium LT9611UXC HDMI bridge. Lontium LT9611UXC is a
DSI to HDMI bridge which supports two DSI ports and I2S port as an input
and HDMI port as output. Despite name being similar to LT9611, these
devices are different enough to warrant separate driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org >
Reviewed-by: Sam Ravnborg <sam@ravnborg.org >
Signed-off-by: Sam Ravnborg <sam@ravnborg.org >
Link: https://patchwork.freedesktop.org/patch/msgid/20201102011435.1100930-3-dmitry.baryshkov@linaro.org
2020-11-07 12:04:40 +01:00
fb43aa0acd
drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge
...
Add a new DRM bridge driver for Cadence MHDP8546 DPTX IP used in TI J721E
SoC. MHDP DPTX IP is the component that complies with VESA DisplayPort (DP)
and embedded Display Port (eDP) standards. It integrates uCPU running the
embedded Firmware (FW) interfaced over APB interface.
Basically, it takes a DPI stream as input and outputs it encoded in DP
format. Currently, it supports only SST mode.
Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com >
Co-developed-by: Jyri Sarha <jsarha@ti.com >
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com >
Signed-off-by: Jyri Sarha <jsarha@ti.com >
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com >
Signed-off-by: Yuti Amonkar <yamonkar@cadence.com >
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com >
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com >
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com >
2020-09-18 15:16:01 +03:00
1930d19cb4
drm/bridge: tc358762: Add basic driver for Toshiba TC358762 DSI-to-DPI bridge
...
Add very basic driver for Toshiba TC358762 DSI-to-DPI bridge, derived
from tc358764 driver and panel-raspberrypi-touchscreen. This driver is
meant to replace the panel-raspberrypi-touchscreen too, as the bridge
connection can be described in DT too.
Signed-off-by: Marek Vasut <marex@denx.de >
Cc: dri-devel@lists.freedesktop.org
Cc: Eric Anholt <eric@anholt.net >
Cc: Rob Herring <robh+dt@kernel.org >
Cc: Sam Ravnborg <sam@ravnborg.org >
Cc: devicetree@vger.kernel.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org >
Signed-off-by: Sam Ravnborg <sam.ravnborg@gmail.com >
Link: https://patchwork.freedesktop.org/patch/msgid/20200809105705.6334-2-marex@denx.de
2020-08-12 22:06:18 +02:00
b26975593b
display/drm/bridge: TC358775 DSI/LVDS driver
...
This driver is tested with two panels individually with Apq8016-IFC6309 board
https://www.inforcecomputing.com/products/single-board-computers-sbc/qualcomm-snapdragon-410-inforce-6309-micro-sbc
1. 1366x768@60 auo,b101xtn01 data-mapping = "jeida-24"
2. 800x480@60 innolux,at070tn92 data-mapping = "vesa-24"
- power off sequence in proper order
- put_unaligned_be16, put_unaligned_le32 macros used
- static function for mode_valid
- len initialized
- MODE_CLOCK_HIGH handled properly
- bus_formats handled in mode_valid
- GENMASK and FIELD_PREP used
- Kconfig proper indentation
- error handling endpoint data-lanes
- check for bus_formats unsupported
- display_timings naming local variables
- help modified
- ~vsdelay dynamic value set based on the
calculation of dsi speed, output speed, blanking
- panel->connector_type removed
- dual port implemented
- devm_drm_panel_bridge_add method used instead of panel
description modified
- regulator enable and disable with proper orders and delays
as per the spec
- removed drm_connector_status
- added bus_formats
- mdelay to usleep_range
- magic number to macros for CLRSI and mux registers
description modified
- replaced u32 instead of uint32_t
- updated alphabetic order of headers
- added SPDX identifier license
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com >
Reviewed-by: Sam Ravnborg <sam@ravnborg.org >
Signed-off-by: Sam Ravnborg <sam.ravnborg@gmail.com >
Link: https://patchwork.freedesktop.org/patch/msgid/1594388491-15129-2-git-send-email-simhavcs@gmail.com
2020-08-10 19:46:06 +02:00
23278bf54a
drm/bridge: Introduce LT9611 DSI to HDMI bridge
...
Lontium Lt9611 is a DSI to HDMI bridge which supports two DSI ports and
I2S port as an input and HDMI port as output
Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org >
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org >
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org >
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org >
Tested-by: John Stultz <john.stultz@linaro.org >
Signed-off-by: Vinod Koul <vkoul@kernel.org >
Signed-off-by: Sam Ravnborg <sam@ravnborg.org > # fix lt9611_bridge_mode_valid
Link: https://patchwork.freedesktop.org/patch/msgid/20200723163442.1280414-4-vkoul@kernel.org
2020-07-26 16:55:49 +02:00
e7f12054a1
drm/bridge: chrontel-ch7033: Add a new driver
...
This is a driver for video encoder with VGA and DVI/HDMI outputs.
There is no documentation for the chip -- the operation was guessed from
what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names
come from the ch7035 driver in Mediatek's GPL code dump.
Only bare minimum is implemented -- no fancy stuff, such as scaling. That
would only worsen our misery. We don't load the firmware and we don't need
to even bother enabling the MCU. There are probably no distributable
firmware images anyway.
Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60,
with VGA as well as DVI.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk >
Acked-by: Sam Ravnborg <sam@ravnborg.org >
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com >
Link: https://patchwork.freedesktop.org/patch/msgid/20200424213539.93157-4-lkundrak@v3.sk
2020-05-05 09:48:56 +02:00
44cfc62334
drm/bridge: Add NWL MIPI DSI host controller support
...
This adds initial support for the NWL MIPI DSI Host controller found on
i.MX8 SoCs.
It adds support for the i.MX8MQ but the same IP can be found on
e.g. the i.MX8QXP.
It has been tested on the Librem 5 devkit using mxsfb.
Signed-off-by: Guido Günther <agx@sigxcpu.org >
Co-developed-by: Robert Chiras <robert.chiras@nxp.com >
Signed-off-by: Robert Chiras <robert.chiras@nxp.com >
Tested-by: Robert Chiras <robert.chiras@nxp.com >
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm >
Reviewed-by: Fabio Estevam <festevam@gmail.com >
Signed-off-by: Sam Ravnborg <sam@ravnborg.org >
Link: https://patchwork.freedesktop.org/patch/msgid/1cf5750f734e33d005564cd89c576eaf3c1c192b.1586427783.git.agx@sigxcpu.org
2020-04-09 15:52:47 +02:00
cff5e6f7e8
drm/bridge: Add driver for the TI TPD12S015 HDMI level shifter
...
The TI TPD12S015 is an HDMI level shifter and ESD protector controlled
through GPIOs. Add a DRM bridge driver for the device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com >
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com >
Acked-by: Sam Ravnborg <sam@ravnborg.org >
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com >
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com >
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com >
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-17-laurent.pinchart@ideasonboard.com
2020-02-26 13:31:38 +02:00
0c275c3017
drm/bridge: Add bridge driver for display connectors
...
Display connectors are modelled in DT as a device node, but have so far
been handled manually in several bridge drivers. This resulted in
duplicate code in several bridge drivers, with slightly different (and
thus confusing) logics.
In order to fix this, implement a bridge driver for display connectors.
The driver centralises logic for the DVI, HDMI, VGAn composite and
S-video connectors and exposes corresponding bridge operations.
This driver in itself doesn't solve the issue completely, changes in
bridge and display controller drivers are needed to make use of the new
connector driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com >
Reviewed-by: Maxime Ripard <mripard@kernel.org >
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com >
Acked-by: Sam Ravnborg <sam@ravnborg.org >
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com >
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com >
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com >
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-16-laurent.pinchart@ideasonboard.com
2020-02-26 13:31:37 +02:00
0411374bdf
drm/bridge: dumb-vga-dac: Rename driver to simple-bridge
...
The dumb-vga-dac driver can support simple DRM bridges without being
limited to VGA DACs. Rename it to simple-bridge.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com >
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com >
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com >
Acked-by: Maxime Ripard <mripard@kernel.org >
Acked-by: Sam Ravnborg <sam@ravnborg.org >
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com >
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com >
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com >
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-12-laurent.pinchart@ideasonboard.com
2020-02-26 13:31:31 +02:00
ff1ca6397b
drm/bridge: Add tc358768 driver
...
Add basic support for the Toshiba TC358768 RGB to DSI bridge.
Not all the features of the TC358768 is implemented by the initial driver:
MIPI_DSI_MODE_VIDEO and MIPI_DSI_FMT_RGB888 is only supported and tested.
Only write is implemented for mipi_dsi_host_ops.transfer.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com >
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com >
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com >
Link: https://patchwork.freedesktop.org/patch/msgid/20200131111553.472-3-peter.ujfalusi@ti.com
2020-02-10 10:49:49 +01:00
bc1aee7fc8
drm/bridge: Add I2C based driver for ps8640 bridge
...
This patch adds drm_bridge driver for parade DSI to eDP bridge chip.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com >
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org >
[uli: followed API changes, removed FW update feature]
Signed-off-by: Ulrich Hecht <uli@fpond.eu >
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com >
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org >
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com >
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com >
Link: https://patchwork.freedesktop.org/patch/msgid/20191230090419.137141-3-enric.balletbo@collabora.com
2020-01-22 16:45:50 +01:00
0d60131a3b
drm/bridge: Repurpose lvds-encoder.c
...
lvds-encoder.c implementation is also suitable for LVDS decoders,
not just LVDS encoders.
Instead of creating a new driver for addressing support for
transparent LVDS decoders, repurpose lvds-encoder.c for the greater
good with this patch.
This patch only "rebrands" the lvds-encoder.c driver, to make it
suitable for hosting LVDS decoders support. The actual support for
LVDS decoders will come with a later patch.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com >
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com >
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com >
Link: https://patchwork.freedesktop.org/patch/msgid/1573660292-10629-6-git-send-email-fabrizio.castro@bp.renesas.com
2019-12-18 12:26:07 +01:00
5d97408e0d
drm/bridge: move ANA78xx driver to analogix subdirectory
...
As ANA78xx chips are designed and produced by Analogix Semiconductor,
Inc, move their driver codes into analogix subdirectory.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io >
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com >
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com >
Signed-off-by: Torsten Duwe <duwe@suse.de >
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com >
Signed-off-by: Maxime Ripard <maxime@cerno.tech >
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135202.2089C68BE1@verein.lst.de
2019-11-08 10:27:26 +01:00
f38b7cca6d
drm/bridge: tc358764: Add DSI to LVDS bridge driver
...
Add a drm_bridge driver for the Toshiba TC358764 DSI to LVDS bridge.
Changes in v4:
- removed license blob,
- ordered includes,
- added error handling,
- fixed reset GPIO handling,
- added missing calls to the panel,
- custom OF graph code replaced with helpers,
- removed tc358764_poweroff from remove callback.
v5:
- fixed supply names,
- fixed broken console - added connector to fb_helper,
- added detach callback - unbinding works,
- fixed typo in error checking code,
- removed sparse bridge->encoder check - core does it already.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com >
Signed-off-by: Maciej Purski <m.purski@samsung.com >
[ a.hajda@samsung.com: v4, v5 ]
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725154644.25412-6-a.hajda@samsung.com
2018-07-27 09:09:57 +02:00
Liu Ying
Jagan Teki
Marek Vasut
Allen Chen
Enric Balletbo i Serra
Phong LE
Adrien Grassein
Dmitry Baryshkov
Swapnil Jakhade
Vinay Simha BN
Vinod Koul
Lubomir Rintel
Guido Günther
Laurent Pinchart
Peter Ujfalusi
Jitao Shi
Fabrizio Castro
Icenowy Zheng
Andrzej Hajda