diff --git a/rpi_pico/epaper_example/CMakeLists.txt b/rpi_pico/epaper_example/CMakeLists.txt
index 21668a5..aaf5ead 100644
--- a/rpi_pico/epaper_example/CMakeLists.txt
+++ b/rpi_pico/epaper_example/CMakeLists.txt
@@ -1,3 +1,31 @@
+# == DO NEVER EDIT THE NEXT LINES for Raspberry Pi Pico VS Code Extension to work ==
+if(WIN32)
+    set(USERHOME $ENV{USERPROFILE})
+else()
+    set(USERHOME $ENV{HOME})
+endif()
+set(sdkVersion 2.0.0)
+set(toolchainVersion 13_2_Rel1)
+set(picotoolVersion 2.0.0)
+set(picoVscode ${USERHOME}/.pico-sdk/cmake/pico-vscode.cmake)
+if (EXISTS ${picoVscode})
+    include(${picoVscode})
+endif()
+# ====================================================================================
+# == DO NEVER EDIT THE NEXT LINES for Raspberry Pi Pico VS Code Extension to work ==
+if(WIN32)
+    set(USERHOME $ENV{USERPROFILE})
+else()
+    set(USERHOME $ENV{HOME})
+endif()
+set(sdkVersion 2.0.0)
+set(toolchainVersion 13_2_Rel1)
+set(picotoolVersion 2.0.0)
+set(picoVscode ${USERHOME}/.pico-sdk/cmake/pico-vscode.cmake)
+if (EXISTS ${picoVscode})
+    include(${picoVscode})
+endif()
+# ====================================================================================
 # Generated Cmake Pico project file
 
 cmake_minimum_required(VERSION 3.13)
diff --git a/rpi_pico/epaper_example/epaper_example.c b/rpi_pico/epaper_example/epaper_example.c
index b25375a..9f96035 100644
--- a/rpi_pico/epaper_example/epaper_example.c
+++ b/rpi_pico/epaper_example/epaper_example.c
@@ -11,6 +11,9 @@
 #define PIN_CS   17
 #define PIN_SCK  18
 #define PIN_MOSI 19
+#define PIN_BUSY 22
+#define PIN_DC 21
+#define PIN_RST 20
 
 // I2C defines
 // This example will use I2C0 on GPIO8 (SDA) and GPIO9 (SCL) running at 400KHz.
@@ -29,31 +32,11 @@ BBEPDISP bbep; // the main display structure
 
 int main()
 {
-    stdio_init_all();
-
-    // SPI initialisation. This example will use SPI at 1MHz.
-    spi_init(SPI_PORT, 1000*1000);
-    gpio_set_function(PIN_MISO, GPIO_FUNC_SPI);
-    gpio_set_function(PIN_CS,   GPIO_FUNC_SIO);
-    gpio_set_function(PIN_SCK,  GPIO_FUNC_SPI);
-    gpio_set_function(PIN_MOSI, GPIO_FUNC_SPI);
-    
-    // Chip select is active-low, so we'll initialise it to a driven-high state
-    gpio_set_dir(PIN_CS, GPIO_OUT);
-    gpio_put(PIN_CS, 1);
-    // For more examples of SPI use see https://github.com/raspberrypi/pico-examples/tree/master/spi
-
-    // I2C Initialisation. Using it at 400Khz.
-    i2c_init(I2C_PORT, 400*1000);
-    
-    gpio_set_function(I2C_SDA, GPIO_FUNC_I2C);
-    gpio_set_function(I2C_SCL, GPIO_FUNC_I2C);
-    gpio_pull_up(I2C_SDA);
-    gpio_pull_up(I2C_SCL);
-    // For more examples of I2C use see https://github.com/raspberrypi/pico-examples/tree/master/i2c
-
-    while (true) {
-        printf("Hello, world!\n");
-        sleep_ms(1000);
-    }
-}
+    bbepSetPanelType(&bbep, EPD295_128x296); // must set this first
+    bbepInitIO(&bbep, PIN_DC, PIN_RST, PIN_BUSY, PIN_CS, PIN_MOSI, PIN_SCK, 8000000);
+    bbepFill(&bbep, BBEP_WHITE, 0);
+    bbepWriteString(&bbep, 0, 0, "RPI Pico2!", FONT_12x16, BBEP_BLACK);
+    bbepRefresh(&bbep, REFRESH_FULL);
+    bbepWaitBusy(&bbep);
+    bbepSleep(&bbep, DEEP_SLEEP);
+} /* main() */