mirror of
https://github.com/suyu-emu/horinux.git
synced 2026-09-21 14:15:21 -07:00
master
541
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Muchun Song
|
78f39084b4 |
mm: hugetlb_vmemmap: add hugetlb_optimize_vmemmap sysctl
We must add hugetlb_free_vmemmap=on (or "off") to the boot cmdline and
reboot the server to enable or disable the feature of optimizing vmemmap
pages associated with HugeTLB pages. However, rebooting usually takes a
long time. So add a sysctl to enable or disable the feature at runtime
without rebooting. Why we need this? There are 3 use cases.
1) The feature of minimizing overhead of struct page associated with
each HugeTLB is disabled by default without passing
"hugetlb_free_vmemmap=on" to the boot cmdline. When we (ByteDance)
deliver the servers to the users who want to enable this feature, they
have to configure the grub (change boot cmdline) and reboot the
servers, whereas rebooting usually takes a long time (we have thousands
of servers). It's a very bad experience for the users. So we need a
approach to enable this feature after rebooting. This is a use case in
our practical environment.
2) Some use cases are that HugeTLB pages are allocated 'on the fly'
instead of being pulled from the HugeTLB pool, those workloads would be
affected with this feature enabled. Those workloads could be
identified by the characteristics of they never explicitly allocating
huge pages with 'nr_hugepages' but only set 'nr_overcommit_hugepages'
and then let the pages be allocated from the buddy allocator at fault
time. We can confirm it is a real use case from the commit
|
||
|
Muchun Song
|
6e02c46b4d |
mm: memory_hotplug: override memmap_on_memory when hugetlb_free_vmemmap=on
Optimizing HugeTLB vmemmap pages is not compatible with allocating memmap on hot added memory. If "hugetlb_free_vmemmap=on" and memory_hotplug.memmap_on_memory" are both passed on the kernel command line, optimizing hugetlb pages takes precedence. However, the global variable memmap_on_memory will still be set to 1, even though we will not try to allocate memmap on hot added memory. Also introduce mhp_memmap_on_memory() helper to move the definition of "memmap_on_memory" to the scope of CONFIG_MHP_MEMMAP_ON_MEMORY. In the next patch, mhp_memmap_on_memory() will also be exported to be used in hugetlb_vmemmap.c. Link: https://lkml.kernel.org/r/20220512041142.39501-3-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
 Zi Yan
|
b2c9e2fbba |
mm: make alloc_contig_range work at pageblock granularity
alloc_contig_range() worked at MAX_ORDER_NR_PAGES granularity to avoid merging pageblocks with different migratetypes. It might unnecessarily convert extra pageblocks at the beginning and at the end of the range. Change alloc_contig_range() to work at pageblock granularity. Special handling is needed for free pages and in-use pages across the boundaries of the range specified by alloc_contig_range(). Because these= Partially isolated pages causes free page accounting issues. The free pages will be split and freed into separate migratetype lists; the in-use= Pages will be migrated then the freed pages will be handled in the aforementioned way. [ziy@nvidia.com: fix deadlock/crash] Link: https://lkml.kernel.org/r/23A7297E-6C84-4138-A9FE-3598234004E6@nvidia.com Link: https://lkml.kernel.org/r/20220425143118.2850746-4-zi.yan@sent.com Signed-off-by: Zi Yan <ziy@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Hildenbrand <david@redhat.com> Cc: Eric Ren <renzhengeek@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
 liusongtang
|
6366238b8d |
mm/memory_hotplug: use pgprot_val to get value of pgprot
pgprot.pgprot is non-portable code. It should be replaced by portable macro pgprot_val. Link: https://lkml.kernel.org/r/20220426071302.220646-1-liusongtang@huawei.com Signed-off-by: liusongtang <liusongtang@huawei.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
 Joao Martins
|
e3246d8f52 |
mm/sparse-vmemmap: add a pgmap argument to section activation
Patch series "sparse-vmemmap: memory savings for compound devmaps (device-dax)", v9.
This series minimizes 'struct page' overhead by pursuing a similar
approach as Muchun Song series "Free some vmemmap pages of hugetlb page"
(now merged since v5.14), but applied to devmap with @vmemmap_shift
(device-dax).
The vmemmap dedpulication original idea (already used in HugeTLB) is to
reuse/deduplicate tail page vmemmap areas, particular the area which only
describes tail pages. So a vmemmap page describes 64 struct pages, and
the first page for a given ZONE_DEVICE vmemmap would contain the head page
and 63 tail pages. The second vmemmap page would contain only tail pages,
and that's what gets reused across the rest of the subsection/section.
The bigger the page size, the bigger the savings (2M hpage -> save 6
vmemmap pages; 1G hpage -> save 4094 vmemmap pages).
This is done for PMEM /specifically only/ on device-dax configured
namespaces, not fsdax. In other words, a devmap with a @vmemmap_shift.
In terms of savings, per 1Tb of memory, the struct page cost would go down
with compound devmap:
* with 2M pages we lose 4G instead of 16G (0.39% instead of 1.5% of
total memory)
* with 1G pages we lose 40MB instead of 16G (0.0014% instead of 1.5% of
total memory)
The series is mostly summed up by patch 4, and to summarize what the
series does:
Patches 1 - 3: Minor cleanups in preparation for patch 4. Move the very
nice docs of hugetlb_vmemmap.c into a Documentation/vm/ entry.
Patch 4: Patch 4 is the one that takes care of the struct page savings
(also referred to here as tail-page/vmemmap deduplication). Much like
Muchun series, we reuse the second PTE tail page vmemmap areas across a
given @vmemmap_shift On important difference though, is that contrary to
the hugetlbfs series, there's no vmemmap for the area because we are
late-populating it as opposed to remapping a system-ram range. IOW no
freeing of pages of already initialized vmemmap like the case for
hugetlbfs, which greatly simplifies the logic (besides not being
arch-specific). altmap case unchanged and still goes via the
vmemmap_populate(). Also adjust the newly added docs to the device-dax
case.
[Note that device-dax is still a little behind HugeTLB in terms of
savings. I have an additional simple patch that reuses the head vmemmap
page too, as a follow-up. That will double the savings and namespaces
initialization.]
Patch 5: Initialize fewer struct pages depending on the page size with
DRAM backed struct pages -- because fewer pages are unique and most tail
pages (with bigger vmemmap_shift).
NVDIMM namespace bootstrap improves from ~268-358 ms to
~80-110/<1ms on 128G NVDIMMs with 2M and 1G respectivally. And struct
page needed capacity will be 3.8x / 1071x smaller for 2M and 1G
respectivelly. Tested on x86 with 1.5Tb of pmem (including pinning,
and RDMA registration/deregistration scalability with 2M MRs)
This patch (of 5):
In support of using compound pages for devmap mappings, plumb the pgmap
down to the vmemmap_populate implementation. Note that while altmap is
retrievable from pgmap the memory hotplug code passes altmap without
pgmap[*], so both need to be independently plumbed.
So in addition to @altmap, pass @pgmap to sparse section populate
functions namely:
sparse_add_section
section_activate
populate_section_memmap
__populate_section_memmap
Passing @pgmap allows __populate_section_memmap() to both fetch the
vmemmap_shift in which memmap metadata is created for and also to let
sparse-vmemmap fetch pgmap ranges to co-relate to a given section and pick
whether to just reuse tail pages from past onlined sections.
While at it, fix the kdoc for @altmap for sparse_add_section().
[*] https://lore.kernel.org/linux-mm/20210319092635.6214-1-osalvador@suse.de/
Link: https://lkml.kernel.org/r/20220420155310.9712-1-joao.m.martins@oracle.com
Link: https://lkml.kernel.org/r/20220420155310.9712-2-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Muchun Song
|
f10f1442c3 |
mm: hugetlb_vmemmap: cleanup hugetlb_free_vmemmap_enabled*
The word of "free" is not expressive enough to express the feature of optimizing vmemmap pages associated with each HugeTLB, rename this keywork to "optimize". In this patch , cheanup the static key and hugetlb_free_vmemmap_enabled() to make code more expressive. Link: https://lkml.kernel.org/r/20220404074652.68024-3-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
 Linus Torvalds
|
9030fb0bb9 |
Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
|
||
 David Hildenbrand
|
395f6081ba |
drivers/base/memory: determine and store zone for single-zone memory blocks
test_pages_in_a_zone() is just another nasty PFN walker that can easily stumble over ZONE_DEVICE memory ranges falling into the same memory block as ordinary system RAM: the memmap of parts of these ranges might possibly be uninitialized. In fact, we observed (on an older kernel) with UBSAN: UBSAN: Undefined behaviour in ./include/linux/mm.h:1133:50 index 7 is out of range for type 'zone [5]' CPU: 121 PID: 35603 Comm: read_all Kdump: loaded Tainted: [...] Hardware name: Dell Inc. PowerEdge R7425/08V001, BIOS 1.12.2 11/15/2019 Call Trace: dump_stack+0x9a/0xf0 ubsan_epilogue+0x9/0x7a __ubsan_handle_out_of_bounds+0x13a/0x181 test_pages_in_a_zone+0x3c4/0x500 show_valid_zones+0x1fa/0x380 dev_attr_show+0x43/0xb0 sysfs_kf_seq_show+0x1c5/0x440 seq_read+0x49d/0x1190 vfs_read+0xff/0x300 ksys_read+0xb8/0x170 do_syscall_64+0xa5/0x4b0 entry_SYSCALL_64_after_hwframe+0x6a/0xdf RIP: 0033:0x7f01f4439b52 We seem to stumble over a memmap that contains a garbage zone id. While we could try inserting pfn_to_online_page() calls, it will just make memory offlining slower, because we use test_pages_in_a_zone() to make sure we're offlining pages that all belong to the same zone. Let's just get rid of this PFN walker and determine the single zone of a memory block -- if any -- for early memory blocks during boot. For memory onlining, we know the single zone already. Let's avoid any additional memmap scanning and just rely on the zone information available during boot. For memory hot(un)plug, we only really care about memory blocks that: * span a single zone (and, thereby, a single node) * are completely System RAM (IOW, no holes, no ZONE_DEVICE) If one of these conditions is not met, we reject memory offlining. Hotplugged memory blocks (starting out offline), always meet both conditions. There are three scenarios to handle: (1) Memory hot(un)plug A memory block with zone == NULL cannot be offlined, corresponding to our previous test_pages_in_a_zone() check. After successful memory onlining/offlining, we simply set the zone accordingly. * Memory onlining: set the zone we just used for onlining * Memory offlining: set zone = NULL So a hotplugged memory block starts with zone = NULL. Once memory onlining is done, we set the proper zone. (2) Boot memory with !CONFIG_NUMA We know that there is just a single pgdat, so we simply scan all zones of that pgdat for an intersection with our memory block PFN range when adding the memory block. If more than one zone intersects (e.g., DMA and DMA32 on x86 for the first memory block) we set zone = NULL and consequently mimic what test_pages_in_a_zone() used to do. (3) Boot memory with CONFIG_NUMA At the point in time we create the memory block devices during boot, we don't know yet which nodes *actually* span a memory block. While we could scan all zones of all nodes for intersections, overlapping nodes complicate the situation and scanning all nodes is possibly expensive. But that problem has already been solved by the code that sets the node of a memory block and creates the link in the sysfs -- do_register_memory_block_under_node(). So, we hook into the code that sets the node id for a memory block. If we already have a different node id set for the memory block, we know that multiple nodes *actually* have PFNs falling into our memory block: we set zone = NULL and consequently mimic what test_pages_in_a_zone() used to do. If there is no node id set, we do the same as (2) for the given node. Note that the call order in driver_init() is: -> memory_dev_init(): create memory block devices -> node_dev_init(): link memory block devices to the node and set the node id So in summary, we detect if there is a single zone responsible for this memory block and we consequently store the zone in that case in the memory block, updating it during memory onlining/offlining. Link: https://lkml.kernel.org/r/20220210184359.235565-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Rafael Parra <rparrazo@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rafael Parra <rparrazo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
cc6515591b |
drivers/base/node: rename link_mem_sections() to register_memory_block_under_node()
Patch series "drivers/base/memory: determine and store zone for single-zone memory blocks", v2. I remember talking to Michal in the past about removing test_pages_in_a_zone(), which we use for: * verifying that a memory block we intend to offline is really only managed by a single zone. We don't support offlining of memory blocks that are managed by multiple zones (e.g., multiple nodes, DMA and DMA32) * exposing that zone to user space via /sys/devices/system/memory/memory*/valid_zones Now that I identified some more cases where test_pages_in_a_zone() might go wrong, and we received an UBSAN report (see patch #3), let's get rid of this PFN walker. So instead of detecting the zone at runtime with test_pages_in_a_zone() by scanning the memmap, let's determine and remember for each memory block if it's managed by a single zone. The stored zone can then be used for the above two cases, avoiding a manual lookup using test_pages_in_a_zone(). This avoids eventually stumbling over uninitialized memmaps in corner cases, especially when ZONE_DEVICE ranges partly fall into memory block (that are responsible for managing System RAM). Handling memory onlining is easy, because we online to exactly one zone. Handling boot memory is more tricky, because we want to avoid scanning all zones of all nodes to detect possible zones that overlap with the physical memory region of interest. Fortunately, we already have code that determines the applicable nodes for a memory block, to create sysfs links -- we'll hook into that. Patch #1 is a simple cleanup I had laying around for a longer time. Patch #2 contains the main logic to remove test_pages_in_a_zone() and further details. [1] https://lkml.kernel.org/r/20220128144540.153902-1-david@redhat.com [2] https://lkml.kernel.org/r/20220203105212.30385-1-david@redhat.com This patch (of 2): Let's adjust the stale terminology, making it match unregister_memory_block_under_nodes() and do_register_memory_block_under_node(). We're dealing with memory block devices, which span 1..X memory sections. Link: https://lkml.kernel.org/r/20220210184359.235565-1-david@redhat.com Link: https://lkml.kernel.org/r/20220210184359.235565-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Oscar Salvador <osalvador@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rafael Parra <rparrazo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
 Miaohe Lin
|
36ba30bc1d |
mm/memory_hotplug: fix misplaced comment in offline_pages
It's misplaced since commit
|
||
|
Miaohe Lin
|
b27340a5bd |
mm/memory_hotplug: clean up try_offline_node
We can use helper macro node_spanned_pages to check whether node spans pages. And we can change the parameter of check_cpu_on_node to nid as that's what it really cares. Thus we can further get rid of the local variable pgdat and improve the readability a bit. Link: https://lkml.kernel.org/r/20220207133643.23427-4-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Miaohe Lin
|
d6aad2016a |
mm/memory_hotplug: avoid calling zone_intersects() for ZONE_NORMAL
If zid reaches ZONE_NORMAL, the caller will always get the NORMAL zone no matter what zone_intersects() returns. So we can save some possible cpu cycles by avoid calling zone_intersects() for ZONE_NORMAL. Link: https://lkml.kernel.org/r/20220207133643.23427-3-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Miaohe Lin
|
2b6bf15f46 |
mm/memory_hotplug: remove obsolete comment of __add_pages
Patch series "A few cleanup patches around memory_hotplug".
This series contains a few patches to fix obsolete and misplaced comments,
clean up the try_offline_node function and so on.
This patch (of 4):
Since commit
|
||
 Michal Hocko
|
70b5b46a75 |
mm, memory_hotplug: reorganize new pgdat initialization
When a !node_online node is brought up it needs a hotplug specific initialization because the node could be either uninitialized yet or it could have been recycled after previous hotremove. hotadd_init_pgdat is responsible for that. Internal pgdat state is initialized at two places currently - hotadd_init_pgdat - free_area_init_core_hotplug There is no real clear cut what should go where but this patch's chosen to move the whole internal state initialization into free_area_init_core_hotplug. hotadd_init_pgdat is still responsible to pull all the parts together - most notably to initialize zonelists because those depend on the overall topology. This patch doesn't introduce any functional change. Link: https://lkml.kernel.org/r/20220127085305.20890-5-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Rafael Aquini <raquini@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Alexey Makhalov <amakhalov@vmware.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nico Pache <npache@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
390511e147 |
mm, memory_hotplug: drop arch_free_nodedata
Prior to "mm: handle uninitialized numa nodes gracefully" memory hotplug used to allocate pgdat when memory has been added to a node (hotadd_init_pgdat) arch_free_nodedata has been only used in the failure path because once the pgdat is exported (to be visible by NODA_DATA(nid)) it cannot really be freed because there is no synchronization available for that. pgdat is allocated for each possible nodes now so the memory hotplug doesn't need to do the ever use arch_free_nodedata so drop it. This patch doesn't introduce any functional change. Link: https://lkml.kernel.org/r/20220127085305.20890-4-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Rafael Aquini <raquini@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Alexey Makhalov <amakhalov@vmware.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Nico Pache <npache@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
09f49dca57 |
mm: handle uninitialized numa nodes gracefully
We have had several reports [1][2][3] that page allocator blows up when an allocation from a possible node is requested. The underlying reason is that NODE_DATA for the specific node is not allocated. NUMA specific initialization is arch specific and it can vary a lot. E.g. x86 tries to initialize all nodes that have some cpu affinity (see init_cpu_to_node) but this can be insufficient because the node might be cpuless for example. One way to address this problem would be to check for !node_online nodes when trying to get a zonelist and silently fall back to another node. That is unfortunately adding a branch into allocator hot path and it doesn't handle any other potential NODE_DATA users. This patch takes a different approach (following a lead of [3]) and it pre allocates pgdat for all possible nodes in an arch indipendent code - free_area_init. All uninitialized nodes are treated as memoryless nodes. node_state of the node is not changed because that would lead to other side effects - e.g. sysfs representation of such a node and from past discussions [4] it is known that some tools might have problems digesting that. Newly allocated pgdat only gets a minimal initialization and the rest of the work is expected to be done by the memory hotplug - hotadd_new_pgdat (renamed to hotadd_init_pgdat). generic_alloc_nodedata is changed to use the memblock allocator because neither page nor slab allocators are available at the stage when all pgdats are allocated. Hotplug doesn't allocate pgdat anymore so we can use the early boot allocator. The only arch specific implementation is ia64 and that is changed to use the early allocator as well. [1] http://lkml.kernel.org/r/20211101201312.11589-1-amakhalov@vmware.com [2] http://lkml.kernel.org/r/20211207224013.880775-1-npache@redhat.com [3] http://lkml.kernel.org/r/20190114082416.30939-1-mhocko@kernel.org [4] http://lkml.kernel.org/r/20200428093836.27190-1-srikar@linux.vnet.ibm.com [akpm@linux-foundation.org: replace comment, per Mike] Link: https://lkml.kernel.org/r/Yfe7RBeLCijnWBON@dhcp22.suse.cz Reported-by: Alexey Makhalov <amakhalov@vmware.com> Tested-by: Alexey Makhalov <amakhalov@vmware.com> Reported-by: Nico Pache <npache@redhat.com> Acked-by: Rafael Aquini <raquini@redhat.com> Tested-by: Rafael Aquini <raquini@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Muchun Song
|
a6b40850c4 |
mm: hugetlb: replace hugetlb_free_vmemmap_enabled with a static_key
The page_fixed_fake_head() is used throughout memory management and the conditional check requires checking a global variable, although the overhead of this check may be small, it increases when the memory cache comes under pressure. Also, the global variable will not be modified after system boot, so it is very appropriate to use static key machanism. Link: https://lkml.kernel.org/r/20211101031651.75851-3-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Barry Song <song.bao.hua@hisilicon.com> Cc: Bodeddula Balasubramaniam <bodeddub@amazon.com> Cc: Chen Huang <chenhuang5@huawei.com> Cc: David Hildenbrand <david@redhat.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
 Matthew Wilcox (Oracle)
|
869f7ee6f6 |
mm/rmap: Convert try_to_unmap() to take a folio
Change all three callers and the worker function try_to_unmap_one(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> |
||
 Jakub Kicinski
|
8581fd402a |
treewide: Add missing includes masked by cgroup -> bpf dependency
cgroup.h (therefore swap.h, therefore half of the universe) includes bpf.h which in turn includes module.h and slab.h. Since we're about to get rid of that dependency we need to clean things up. v2: drop the cpu.h include from cacheinfo.h, it's not necessary and it makes riscv sensitive to ordering of include files. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Krzysztof Wilczyński <kw@linux.com> Acked-by: Peter Chen <peter.chen@kernel.org> Acked-by: SeongJae Park <sj@kernel.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/all/20211120035253.72074-1-kuba@kernel.org/ # v1 Link: https://lore.kernel.org/all/20211120165528.197359-1-kuba@kernel.org/ # cacheinfo discussion Link: https://lore.kernel.org/bpf/20211202203400.1208663-1-kuba@kernel.org |
||
|
David Hildenbrand
|
32befe9e27 |
mm/memory_hotplug: indicate MEMBLOCK_DRIVER_MANAGED with IORESOURCE_SYSRAM_DRIVER_MANAGED
Let's communicate driver-managed regions to memblock, to properly teach kexec_file with CONFIG_ARCH_KEEP_MEMBLOCK to not place images on these memory regions. Link: https://lkml.kernel.org/r/20211004093605.5830-6-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Jianyong Wu <Jianyong.Wu@arm.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Shahab Vahedi <shahab@synopsys.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
952eea9b01 |
memblock: allow to specify flags with memblock_add_node()
We want to specify flags when hotplugging memory. Let's prepare to pass flags to memblock_add_node() by adjusting all existing users. Note that when hotplugging memory the system is already up and running and we might have concurrent memblock users: for example, while we're hotplugging memory, kexec_file code might search for suitable memory regions to place kexec images. It's important to add the memory directly to memblock via a single call with the right flags, instead of adding the memory first and apply flags later: otherwise, concurrent memblock users might temporarily stumble over memblocks with wrong flags, which will be important in a follow-up patch that introduces a new flag to properly handle add_memory_driver_managed(). Link: https://lkml.kernel.org/r/20211004093605.5830-4-david@redhat.com Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Shahab Vahedi <shahab@synopsys.com> [arch/arc] Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Jianyong Wu <Jianyong.Wu@arm.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
53d38316ab |
mm/memory_hotplug: handle memblock_add_node() failures in add_memory_resource()
Patch series "mm/memory_hotplug: full support for add_memory_driver_managed() with CONFIG_ARCH_KEEP_MEMBLOCK", v2.
Architectures that require CONFIG_ARCH_KEEP_MEMBLOCK=y, such as arm64,
don't cleanly support add_memory_driver_managed() yet. Most
prominently, kexec_file can still end up placing kexec images on such
driver-managed memory, resulting in undesired behavior, for example,
having kexec images located on memory not part of the firmware-provided
memory map.
Teaching kexec to not place images on driver-managed memory is
especially relevant for virtio-mem. Details can be found in commit
|
||
|
David Hildenbrand
|
6b740c6c3a |
mm/memory_hotplug: remove HIGHMEM leftovers
We don't support CONFIG_MEMORY_HOTPLUG on 32 bit and consequently not HIGHMEM. Let's remove any leftover code -- including the unused "status_change_nid_high" field part of the memory notifier. Link: https://lkml.kernel.org/r/20210929143600.49379-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Alex Shi <alexs@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
50f9481ed9 |
mm/memory_hotplug: remove CONFIG_MEMORY_HOTPLUG_SPARSE
CONFIG_MEMORY_HOTPLUG depends on CONFIG_SPARSEMEM, so there is no need for CONFIG_MEMORY_HOTPLUG_SPARSE anymore; adjust all instances to use CONFIG_MEMORY_HOTPLUG and remove CONFIG_MEMORY_HOTPLUG_SPARSE. Link: https://lkml.kernel.org/r/20210929143600.49379-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> [kselftest] Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Oscar Salvador <osalvador@suse.de> Cc: Alex Shi <alexs@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
 Tang Yizhou
|
ac62554ba7 |
mm/memory_hotplug: add static qualifier for online_policy_to_str()
online_policy_to_str is only used in memory_hotplug.c and should be defined as static. Link: https://lkml.kernel.org/r/20210913024534.26161-1-tangyizhou@huawei.com Signed-off-by: Tang Yizhou <tangyizhou@huawei.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |