proxmark3/armlib/at32_sys/at32f435_437_conf.h

/**
  **************************************************************************
  * @file     at32f435_437_conf.h
  * @brief    at32f435_437 config header file
  **************************************************************************
  *                       Copyright notice & Disclaimer
  *
  * The software Board Support Package (BSP) that is made available to
  * download from Artery official website is the copyrighted work of Artery.
  * Artery authorizes customers to use, copy, and distribute the BSP
  * software and its related documentation for the purpose of design and
  * development in conjunction with Artery microcontrollers. Use of the
  * software is governed by this copyright notice and the following disclaimer.
  *
  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
  *
  **************************************************************************
  */

/* define to prevent recursive inclusion -------------------------------------*/
#ifndef __AT32F435_437_CONF_H
#define __AT32F435_437_CONF_H

#ifdef __cplusplus
extern "C" {
#endif

/**
  * @brief in the following line adjust the value of high speed external crystal (hext)
  * used in your application
  *
  * tip: to avoid modifying this file each time you need to use different hext, you
  *      can define the hext value in your toolchain compiler preprocessor.
  *
  */
#if !defined  HEXT_VALUE
#define HEXT_VALUE                       ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
#endif

/**
  * @brief in the following line adjust the high speed external crystal (hext) startup
  * timeout value
  */
#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed external clock in hz */


/*
 * Do not import any at32f435_437_xxx header file in this file.
 * This will cause developers who only want to include the at32f435_437 header file to get a bunch of unnecessary contents,
 * which will lead to possible conflicts of variable/function names!!!
 * ---
 * So all the module enable definitions below have been moved to CMakeLists.txt,
 * and all the driver header files of at32f435_437_xxx are included only when they are used.
 * ---
 * If you do not do this, the 'usart_init ' function in the usart driver of at32 will cause the conflicting types error by pm3's usart module .
 */


/* module define -------------------------------------------------------------*/
// #define CRM_MODULE_ENABLED
// #define TMR_MODULE_ENABLED
// #define ERTC_MODULE_ENABLED
// #define GPIO_MODULE_ENABLED
// #define I2C_MODULE_ENABLED
// #define USART_MODULE_ENABLED
// #define PWC_MODULE_ENABLED
// #define CAN_MODULE_ENABLED
// #define ADC_MODULE_ENABLED
// #define DAC_MODULE_ENABLED
// #define SPI_MODULE_ENABLED
// #define EDMA_MODULE_ENABLED
// #define DMA_MODULE_ENABLED
// #define DEBUG_MODULE_ENABLED
// #define FLASH_MODULE_ENABLED
// #define CRC_MODULE_ENABLED
// #define WWDT_MODULE_ENABLED
// #define WDT_MODULE_ENABLED
// #define EXINT_MODULE_ENABLED
// #define SDIO_MODULE_ENABLED
// #define XMC_MODULE_ENABLED
// #define USB_MODULE_ENABLED
// #define ACC_MODULE_ENABLED
// #define MISC_MODULE_ENABLED
// #define QSPI_MODULE_ENABLED
// #define DVP_MODULE_ENABLED
// #define SCFG_MODULE_ENABLED
// #define EMAC_MODULE_ENABLED

/* includes ------------------------------------------------------------------*/
// #ifdef CRM_MODULE_ENABLED
// #include "at32f435_437_crm.h"
// #endif
// #ifdef TMR_MODULE_ENABLED
// #include "at32f435_437_tmr.h"
// #endif
// #ifdef ERTC_MODULE_ENABLED
// #include "at32f435_437_ertc.h"
// #endif
// #ifdef GPIO_MODULE_ENABLED
// #include "at32f435_437_gpio.h"
// #endif
// #ifdef I2C_MODULE_ENABLED
// #include "at32f435_437_i2c.h"
// #endif
// #ifdef USART_MODULE_ENABLED
// #include "at32f435_437_usart.h"
// #endif
// #ifdef PWC_MODULE_ENABLED
// #include "at32f435_437_pwc.h"
// #endif
// #ifdef CAN_MODULE_ENABLED
// #include "at32f435_437_can.h"
// #endif
// #ifdef ADC_MODULE_ENABLED
// #include "at32f435_437_adc.h"
// #endif
// #ifdef DAC_MODULE_ENABLED
// #include "at32f435_437_dac.h"
// #endif
// #ifdef SPI_MODULE_ENABLED
// #include "at32f435_437_spi.h"
// #endif
// #ifdef DMA_MODULE_ENABLED
// #include "at32f435_437_dma.h"
// #endif
// #ifdef DEBUG_MODULE_ENABLED
// #include "at32f435_437_debug.h"
// #endif
// #ifdef FLASH_MODULE_ENABLED
// #include "at32f435_437_flash.h"
// #endif
// #ifdef CRC_MODULE_ENABLED
// #include "at32f435_437_crc.h"
// #endif
// #ifdef WWDT_MODULE_ENABLED
// #include "at32f435_437_wwdt.h"
// #endif
// #ifdef WDT_MODULE_ENABLED
// #include "at32f435_437_wdt.h"
// #endif
// #ifdef EXINT_MODULE_ENABLED
// #include "at32f435_437_exint.h"
// #endif
// #ifdef SDIO_MODULE_ENABLED
// #include "at32f435_437_sdio.h"
// #endif
// #ifdef XMC_MODULE_ENABLED
// #include "at32f435_437_xmc.h"
// #endif
// #ifdef ACC_MODULE_ENABLED
// #include "at32f435_437_acc.h"
// #endif
// #ifdef MISC_MODULE_ENABLED
// #include "at32f435_437_misc.h"
// #endif
// #ifdef EDMA_MODULE_ENABLED
// #include "at32f435_437_edma.h"
// #endif
// #ifdef QSPI_MODULE_ENABLED
// #include "at32f435_437_qspi.h"
// #endif
// #ifdef SCFG_MODULE_ENABLED
// #include "at32f435_437_scfg.h"
// #endif
// #ifdef EMAC_MODULE_ENABLED
// #include "at32f435_437_emac.h"
// #endif
// #ifdef DVP_MODULE_ENABLED
// #include "at32f435_437_dvp.h"
// #endif
// #ifdef USB_MODULE_ENABLED
// #include "at32f435_437_usb.h"
// #endif

#ifdef __cplusplus
}
#endif

#endif