This adds a new command "hw sethfthresh" to configure the thresholds
used inside the FPGA while demodulating ISO14443A. The thresholds
need to be increased on particularly noisy hardware, such as certain
Chinese PM3 Easy clones.
This was implemented with a new pair of RPCs CMD_HF_MIFARE_READBL_EX and CMD_HF_MIFARE_WRITEBL_EX
these RPCs support all combinations of read/write commands, wakeup, and auth options so
in time can replace the other MFC read/write commands too reduce armsrc code size
and complexity.
Also added config parsing for the gdm cfg block when reading with hf mf gdmcfg and
explicitly with hf mf gdmparsecfg.
Works when the device is running either osimage or bootloader.
- New memory reading command in osimage and bootloader.
- Extended 'hw readmem' command with length parameter, file writing and hex viewer.
- Introduced '--dumpmem' option to proxmark3 executable to support dumping from bootloader.
Simple interactive examples:
hw readmem -f flashdump
hw readmem -l 1024
CLI example:
./pm3 --dumpmem flashdump.bin
Reading from arbitrary memory ranges can be unlocked using the 'raw' option.
No need to wait for 2.5s (1s + FPGA_LOAD_WAIT_TIME) if the real-time
sampling stops.
Make sure the LF bitstream is loaded before real-time sampling so the
response of CMD_WTX won't appear.
Rename UART_TCP_CLIENT_RX_TIMEOUT_MS to UART_NET_CLIENT_RX_TIMEOUT_MS
Add UART_UDP_LOCAL_CLIENT_RX_TIMEOUT_MS for shorter timeout
Check if the target address is local in uart_open()
Henry Gabryjelski
iceman1001
Christian Zietz
nvx
Martijn Plak
wh201906
merlokk
Philippe Teuwen