From c21ddfdb74eef370d9a3d118fb5ea457795232cf Mon Sep 17 00:00:00 2001
From: dxl <64101226@qq.com>
Date: Fri, 4 Sep 2026 09:54:06 +0800
Subject: [PATCH] Power consumption testing has been added for pm5.

---
 armsrc/at32_unit_test.c | 58 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 57 insertions(+), 1 deletion(-)

diff --git a/armsrc/at32_unit_test.c b/armsrc/at32_unit_test.c
index edf589094..be0d5103c 100644
--- a/armsrc/at32_unit_test.c
+++ b/armsrc/at32_unit_test.c
@@ -1827,6 +1827,59 @@ void test_config_uart_tx2_to_dbgio(void) {
     gpio_init(GPIOA, &gpio_init_struct); // PA2_TX
 }
 
+#include "fpga_loader.h"
+#include "lfsampling.h"
+
+void test_max_power(void) {
+    FpgaResetComInterface();
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+
+    SpinDelay(100);
+    FpgaSetup24MHzClk();
+
+    uint8_t data;
+
+    // 开所有的灯
+    LED_A_ON();
+    LED_B_ON();
+    LED_C_ON();
+    LED_D_ON();
+    test_i2c_rgb_simple();
+
+    // 0x03 DischargeCurrentControl 寄存器
+    data = 0xE1; // 修改放电电流到 3A
+    I2C_BufferWrite(&data, 1, 0x03, 0x93);
+    // 0x05 ChargerTermination/TimerControl 寄存器
+    data = 0x1A; // 禁用定时器，正常为了安全可能需要在MainLoop喂狗
+    I2C_BufferWrite(&data, 1, 0x05, 0x93);
+
+#if 0
+    FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER);
+#else
+
+    // 开场
+    // FPGA_MAJOR_MODE_LF_READER | FPGA_LF_ADC_READER_FIELD
+    // FPGA_MAJOR_MODE_HF_READER
+    // FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER | FPGA_LF_ADC_READER_FIELD);
+    LFSetupFPGAForADC(LF_DIVISOR_125, true);
+
+    gpio_fpga_mod_only_setup();
+    Gpio_SSC_DOUT_Low();
+
+    // 配置低频高Q
+    data = 0x87; // 0x87 = 10000111: 125k + 高Q + 开启两个LED
+    I2C_BufferWrite(&data, 1, 0x02, 0x51 << 1);
+
+#endif
+
+    // 调到最高输出电压
+    FpgaSendCommand(FPGA_CMD_SET_PWR_PWM_LOW_COUNT, 4095u & 0xFFF);
+
+    // 蜂鸣器持续响着
+    test_beep();
+}
+
 // 覆盖 UnitTestMain 实现单元测试
 void UnitTestMain(void);
 
@@ -1847,13 +1900,16 @@ void UnitTestMain(void) {
     // ------------------------------- 关闭所有的LED -------------------------------
     LEDsoff();
 
+    // ------------------------------- 功耗测试 -------------------------------
+    // test_max_power();
+
     // ------------------------------- 关闭FPGA输出 -------------------------------
     // 不然的话调试的时候也会很发热
     SpinDelay(500);
     FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 
     // ------------------------------- 测试 配置UART TX2为DBGIO输出 -------------------------------
-    test_config_uart_tx2_to_dbgio();
+    // test_config_uart_tx2_to_dbgio();
 
     // ------------------------------- 测试 蓝牙电池套件UART通信 -------------------------------
     // test_bwm_uart();