diff --git a/.gitignore b/.gitignore index 79e7608..9b759bb 100644 --- a/.gitignore +++ b/.gitignore @@ -1,3 +1,5 @@ .idea/ .vscode/ -.vs/ \ No newline at end of file +.vs/ + +.DS_Store \ No newline at end of file diff --git a/firmware/application/Makefile b/firmware/application/Makefile index 1cb7d19..3409961 100644 --- a/firmware/application/Makefile +++ b/firmware/application/Makefile @@ -12,6 +12,7 @@ SRC_FILES += \ $(PROJ_DIR)/app_cmd.c \ $(PROJ_DIR)/ble_main.c \ $(PROJ_DIR)/rfid_main.c \ + $(PROJ_DIR)/settings.c \ $(PROJ_DIR)/usb_main.c \ $(PROJ_DIR)/rgb_marquee.c \ $(PROJ_DIR)/bsp/bsp_delay.c \ diff --git a/firmware/application/src/app_cmd.c b/firmware/application/src/app_cmd.c index 2eb7559..4ea39a0 100644 --- a/firmware/application/src/app_cmd.c +++ b/firmware/application/src/app_cmd.c @@ -12,6 +12,7 @@ #include "app_status.h" #include "tag_persistence.h" #include "nrf_pwr_mgmt.h" +#include "settings.h" #define NRF_LOG_MODULE_NAME app_cmd @@ -80,6 +81,32 @@ data_frame_tx_t* cmd_processor_get_device_address(uint16_t cmd, uint16_t status, return data_frame_make(cmd, STATUS_DEVICE_SUCCESS, 6, (uint8_t*)(&device_address[0])); } +data_frame_tx_t* cmd_processor_save_settings(uint16_t cmd, uint16_t status, uint16_t length, uint8_t *data) { + status = settings_save_config(); + return data_frame_make(cmd, status, 0, NULL); +} + +data_frame_tx_t* cmd_processor_reset_settings(uint16_t cmd, uint16_t status, uint16_t length, uint8_t *data) { + settings_init_config(); + status = settings_save_config(); + return data_frame_make(cmd, status, 0, NULL); +} + +data_frame_tx_t* cmd_processor_set_animation_mode(uint16_t cmd, uint16_t status, uint16_t length, uint8_t *data) { + if (length == 1) { + settings_set_animation_config(data[0]); + } + else { + status = STATUS_PAR_ERR; + } + return data_frame_make(cmd, status, 0, NULL); +} + +data_frame_tx_t* cmd_processor_get_animation_mode(uint16_t cmd, uint16_t status, uint16_t length, uint8_t *data) { + uint8_t animation_mode = settings_get_animation_config(); + return data_frame_make(cmd, STATUS_DEVICE_SUCCESS, 1, (uint8_t *)(&animation_mode)); +} + #if defined(PROJECT_CHAMELEON_ULTRA) data_frame_tx_t* cmd_processor_14a_scan(uint16_t cmd, uint16_t status, uint16_t length, uint8_t *data) { @@ -524,6 +551,10 @@ static cmd_data_map_t m_data_cmd_map[] = { { DATA_CMD_ENTER_BOOTLOADER, NULL, cmd_processor_enter_bootloader, NULL }, { DATA_CMD_GET_DEVICE_CHIP_ID, NULL, cmd_processor_get_device_chip_id, NULL }, { DATA_CMD_GET_DEVICE_ADDRESS, NULL, cmd_processor_get_device_address, NULL }, + { DATA_CMD_SAVE_SETTINGS, NULL, cmd_processor_save_settings, NULL }, + { DATA_CMD_RESET_SETTINGS, NULL, cmd_processor_reset_settings, NULL }, + { DATA_CMD_SET_ANIMATION_MODE, NULL, cmd_processor_set_animation_mode, NULL }, + { DATA_CMD_GET_ANIMATION_MODE, NULL, cmd_processor_get_animation_mode, NULL }, #if defined(PROJECT_CHAMELEON_ULTRA) diff --git a/firmware/application/src/app_main.c b/firmware/application/src/app_main.c index 2c4a529..1e92c1b 100644 --- a/firmware/application/src/app_main.c +++ b/firmware/application/src/app_main.c @@ -36,6 +36,8 @@ NRF_LOG_MODULE_REGISTER(); #include "usb_main.h" #include "rgb_marquee.h" +#include "settings.h" + // Defining soft timers APP_TIMER_DEF(m_button_check_timer); // Timer for button debounce @@ -219,22 +221,25 @@ static void system_off_enter(void) { for (uint8_t i = 0; i < RGB_LIST_NUM; i++) { nrf_gpio_pin_clear(p_led_array[i]); } - uint8_t slot = tag_emulation_get_slot(); - // Power off animation - uint8_t dir = slot > 3 ? 1 : 0; - uint8_t color = get_color_by_slot(slot); - if (m_reset_source & (NRF_POWER_RESETREAS_NFC_MASK | NRF_POWER_RESETREAS_LPCOMP_MASK)) { - if (m_reset_source & NRF_POWER_RESETREAS_NFC_MASK) { - color = 1; - } else { - color = 2; + uint8_t animation_config = settings_get_animation_config(); + if (animation_config == SettingsAnimationModeFull) { + uint8_t slot = tag_emulation_get_slot(); + // Power off animation + uint8_t dir = slot > 3 ? 1 : 0; + uint8_t color = get_color_by_slot(slot); + if (m_reset_source & (NRF_POWER_RESETREAS_NFC_MASK | NRF_POWER_RESETREAS_LPCOMP_MASK)) { + if (m_reset_source & NRF_POWER_RESETREAS_NFC_MASK) { + color = 1; + } else { + color = 2; + } } + ledblink5(color, slot, dir ? 7 : 0); + ledblink4(color, dir, 7, 99, 75); + ledblink4(color, !dir, 7, 75, 50); + ledblink4(color, dir, 7, 50, 25); + ledblink4(color, !dir, 7, 25, 0); } - ledblink5(color, slot, dir ? 7 : 0); - ledblink4(color, dir, 7, 99, 75); - ledblink4(color, !dir, 7, 75, 50); - ledblink4(color, dir, 7, 50, 25); - ledblink4(color, !dir, 7, 25, 0); rgb_marquee_stop(); } @@ -346,9 +351,18 @@ static void check_wakeup_src(void) { advertising_start(); // Turn on Bluetooth radio // Button wake-up boot animation - ledblink2(color, !dir, 11); - ledblink2(color, dir, 11); - ledblink2(color, !dir, dir ? slot : 7 - slot); + uint8_t animation_config = settings_get_animation_config(); + if (animation_config == SettingsAnimationModeFull) + { + ledblink2(color, !dir, 11); + ledblink2(color, dir, 11); + ledblink2(color, !dir, dir ? slot : 7 - slot); + } else if (animation_config == SettingsAnimationModeMinimal) { + ledblink2(color, !dir, dir ? slot : 7 - slot); + } else { + set_slot_light_color(color); + } + // The indicator of the current card slot lights up at the end of the animation light_up_by_slot(); @@ -374,8 +388,11 @@ static void check_wakeup_src(void) { // 当前是模拟卡事件唤醒系统，我们可以让场强灯先亮起来 TAG_FIELD_LED_ON(); - // In the case of field wake-up, only one round of RGB is swept as the power-on animation - ledblink2(color, !dir, dir ? slot : 7 - slot); + uint8_t animation_config = settings_get_animation_config(); + if (animation_config == SettingsAnimationModeFull) { + // In the case of field wake-up, only one round of RGB is swept as the power-on animation + ledblink2(color, !dir, dir ? slot : 7 - slot); + } set_slot_light_color(color); light_up_by_slot(); @@ -517,6 +534,8 @@ int main(void) { tag_emulation_init(); // Analog card initialization rgb_marquee_init(); // Light effect initialization + settings_load_config(); // Load settings from flash + // cmd callback register on_data_frame_complete(on_data_frame_received); diff --git a/firmware/application/src/data_cmd.h b/firmware/application/src/data_cmd.h index e5437ae..a653574 100644 --- a/firmware/application/src/data_cmd.h +++ b/firmware/application/src/data_cmd.h @@ -20,6 +20,10 @@ #define DATA_CMD_ENTER_BOOTLOADER (1010) #define DATA_CMD_GET_DEVICE_CHIP_ID (1011) #define DATA_CMD_GET_DEVICE_ADDRESS (1012) +#define DATA_CMD_SAVE_SETTINGS (1013) +#define DATA_CMD_RESET_SETTINGS (1014) +#define DATA_CMD_SET_ANIMATION_MODE (1015) +#define DATA_CMD_GET_ANIMATION_MODE (1016) // // ****************************************************************** diff --git a/firmware/application/src/rfid/nfctag/tag_emulation.c b/firmware/application/src/rfid/nfctag/tag_emulation.c index dfa1ff1..849cd03 100644 --- a/firmware/application/src/rfid/nfctag/tag_emulation.c +++ b/firmware/application/src/rfid/nfctag/tag_emulation.c @@ -3,6 +3,7 @@ #include "lf_tag_em.h" #include "nfc_mf1.h" #include "nfc_ntag.h" +#include "fds_ids.h" #include "fds_util.h" #include "tag_emulation.h" #include "tag_persistence.h" diff --git a/firmware/application/src/rfid/nfctag/tag_emulation.h b/firmware/application/src/rfid/nfctag/tag_emulation.h index 1be4573..789424f 100644 --- a/firmware/application/src/rfid/nfctag/tag_emulation.h +++ b/firmware/application/src/rfid/nfctag/tag_emulation.h @@ -5,12 +5,11 @@ #include #include +#include "utils.h" #include "tag_base_type.h" // 最多八张卡槽 #define TAG_MAX_SLOT_NUM 8 -// u32 size align. -#define ALIGN_U32 __attribute__((aligned(4))) extern bool g_is_tag_emulating; diff --git a/firmware/application/src/rfid/nfctag/tag_persistence.c b/firmware/application/src/rfid/nfctag/tag_persistence.c index 2bf7a38..4997be2 100644 --- a/firmware/application/src/rfid/nfctag/tag_persistence.c +++ b/firmware/application/src/rfid/nfctag/tag_persistence.c @@ -1,5 +1,5 @@ #include "tag_persistence.h" - +#include "fds_ids.h" #define NRF_LOG_MODULE_NAME tag_persistence #include "nrf_log.h" diff --git a/firmware/application/src/rfid/nfctag/tag_persistence.h b/firmware/application/src/rfid/nfctag/tag_persistence.h index d25982e..21b51d0 100644 --- a/firmware/application/src/rfid/nfctag/tag_persistence.h +++ b/firmware/application/src/rfid/nfctag/tag_persistence.h @@ -5,27 +5,6 @@ #include "tag_base_type.h" -/* - * 卡槽配置，只有一份，一致即可 - */ -#define FDS_CONFIG_RECORD_FILE_KEY 0x1066 -#define FDS_CONFIG_RECORD_FILE_ID 0x1066 - -/* - * 每个卡槽有高低频两种数据，其中key是跟卡槽走的，而id+n就等于数据索引，固定某个索引为指定类型即可 - * 每个slot的file_key都不一样 - * 每个slot有两种类型的卡片，因此有两个数据ID（当前） - */ -#define FDS_SLOT_TAG_DUMP_FILE_KEY 0x1067 -#define FDS_SLOT_TAG_DUMP_FILE_ID 0x1067 - -/* - * 每个卡槽有高低频两种数据，因此卡槽的昵称也要有两种，其中key是跟卡槽走的，而id+n就等于数据索引，固定某个索引为指定类型即可 - */ -#define FDS_SLOT_TAG_NICK_NAME_KEY 0x1068 -#define FDS_SLOT_TAG_NICK_NAME_ID 0x1068 - - typedef struct { uint16_t key; uint16_t id; diff --git a/firmware/application/src/settings.c b/firmware/application/src/settings.c new file mode 100644 index 0000000..944060c --- /dev/null +++ b/firmware/application/src/settings.c @@ -0,0 +1,117 @@ +#include +#include "crc_utils.h" +#include "app_status.h" +#include "settings.h" +#include "fds_ids.h" +#include "fds_util.h" + +#define NRF_LOG_MODULE_NAME settings +#include "nrf_log.h" +#include "nrf_log_ctrl.h" +#include "nrf_log_default_backends.h" +NRF_LOG_MODULE_REGISTER(); + +static settings_data_t config; + +static uint16_t m_config_crc; + +static void update_config_crc(void) +{ + calc_14a_crc_lut((uint8_t *)&config, sizeof(config), (uint8_t *)&m_config_crc); +} + +static bool config_did_change(void) +{ + uint16_t new_calc_crc; + calc_14a_crc_lut((uint8_t *)&config, sizeof(config), (uint8_t *)&new_calc_crc); + return new_calc_crc != m_config_crc; +} + +void settings_init_config(void) +{ + config.version = SETTINGS_CURRENT_VERSION; + config.animation_config = SettingsAnimationModeFull; +} + +void settings_migrate(void) +{ + switch (config.version) { + case 0: + NRF_LOG_ERROR("Unexpected configuration version detected!"); + settings_init_config(); + break; + /* + * When needed migrations can be implemented like this: + * + * case 1: + * config->new_field = some_default_value; + * case 2: + * config->another_new_field = some_default_value; + * case 3: + * config->another_new_field = some_default_value; + * break; + * + * Note that the `break` statement should only be used on the last migration step, all the previous steps must fall + * through to the next case. + */ + default: + NRF_LOG_ERROR("Unsupported configuration migration attempted! (%d -> %d)", config.version, SETTINGS_CURRENT_VERSION); + break; + } +} + +void settings_load_config(void) +{ + bool ret = fds_read_sync(FDS_SETTINGS_ID, FDS_SETTINGS_KEY, sizeof(config), (uint8_t *)&config); + if (ret) { + NRF_LOG_INFO("Load config done."); + // After the reading is complete, we first save a copy of the current CRC, which can be used as a reference for comparison of changes when saving later + update_config_crc(); + } else { + NRF_LOG_WARNING("Config does not exist, loading default values..."); + settings_init_config(); + } + if (config.version > SETTINGS_CURRENT_VERSION) { + NRF_LOG_WARNING("Config version %d is greater than current firmware supports (%d). Default config will be loaded.", config.version, SETTINGS_CURRENT_VERSION); + settings_init_config(); + } + if (config.version < SETTINGS_CURRENT_VERSION) { + NRF_LOG_INFO("Config version (%d) is not latest, performing migration to %d", config.version, SETTINGS_CURRENT_VERSION); + settings_migrate(); + } + if (config_did_change()) { + settings_save_config(); + } +} + +uint8_t settings_save_config(void) +{ + // We are saving the configuration, we need to calculate the crc code of the current configuration to judge whether the following data is updated + if (config_did_change()) { // Before saving, make sure that the configuration has changed + NRF_LOG_INFO("Save config start."); + bool ret = fds_write_sync(FDS_SETTINGS_ID, FDS_SETTINGS_KEY, sizeof(config) / 4, (uint8_t *)&config); + if (ret) { + NRF_LOG_INFO("Save config success."); + update_config_crc(); + } + else + { + NRF_LOG_ERROR("Save config error."); + return STATUS_FLASH_WRITE_FAIL; + } + } else { + NRF_LOG_INFO("Config did not change."); + } + + return STATUS_DEVICE_SUCCESS; +} + +uint8_t settings_get_animation_config() +{ + return config.animation_config; +} + +void settings_set_animation_config(uint8_t value) +{ + config.animation_config = value; +} diff --git a/firmware/application/src/settings.h b/firmware/application/src/settings.h new file mode 100644 index 0000000..d8cf545 --- /dev/null +++ b/firmware/application/src/settings.h @@ -0,0 +1,31 @@ +#ifndef SETTINGS_H +#define SETTINGS_H + +#include + +#include "utils.h" + +#define SETTINGS_CURRENT_VERSION 1 + +typedef enum { + SettingsAnimationModeFull = 0, + SettingsAnimationModeMinimal = 1, + SettingsAnimationModeNone = 2, +} settings_animation_mode_t; + +typedef struct ALIGN_U32 { + uint16_t version; + uint8_t animation_config : 2; + uint16_t reserved0 : 14; + uint32_t reserved1; + uint32_t reserved2; +} settings_data_t; + +void settings_init_config(void); +void settings_migrate(void); +void settings_load_config(void); +uint8_t settings_save_config(void); +uint8_t settings_get_animation_config(void); +void settings_set_animation_config(uint8_t value); + +#endif diff --git a/firmware/application/src/utils/fds_ids.h b/firmware/application/src/utils/fds_ids.h new file mode 100644 index 0000000..ca11e2e --- /dev/null +++ b/firmware/application/src/utils/fds_ids.h @@ -0,0 +1,30 @@ +#ifndef FDS_IDS_H +#define FDS_IDS_H + +/* + * 卡槽配置，只有一份，一致即可 + */ +#define FDS_CONFIG_RECORD_FILE_KEY 0x1066 +#define FDS_CONFIG_RECORD_FILE_ID 0x1066 + +/* + * 每个卡槽有高低频两种数据，其中key是跟卡槽走的，而id+n就等于数据索引，固定某个索引为指定类型即可 + * 每个slot的file_key都不一样 + * 每个slot有两种类型的卡片，因此有两个数据ID（当前） + */ +#define FDS_SLOT_TAG_DUMP_FILE_KEY 0x1067 +#define FDS_SLOT_TAG_DUMP_FILE_ID 0x1067 + +/* + * 每个卡槽有高低频两种数据，因此卡槽的昵称也要有两种，其中key是跟卡槽走的，而id+n就等于数据索引，固定某个索引为指定类型即可 + */ +#define FDS_SLOT_TAG_NICK_NAME_KEY 0x1068 +#define FDS_SLOT_TAG_NICK_NAME_ID 0x1068 + +/* + * Slot for settings like LED animation mode and future options + */ +#define FDS_SETTINGS_KEY 0x1069 +#define FDS_SETTINGS_ID 0x1069 + +#endif \ No newline at end of file diff --git a/firmware/common/utils.h b/firmware/common/utils.h new file mode 100644 index 0000000..00ecf46 --- /dev/null +++ b/firmware/common/utils.h @@ -0,0 +1,7 @@ +#ifndef UTILS_H_ +#define UTILS_H_ + +// u32 size align. +#define ALIGN_U32 __attribute__((aligned(4))) + +#endif \ No newline at end of file diff --git a/software/script/chameleon_cli_main.py b/software/script/chameleon_cli_main.py index 83fba87..c3bc0aa 100755 --- a/software/script/chameleon_cli_main.py +++ b/software/script/chameleon_cli_main.py @@ -87,6 +87,16 @@ class ChameleonCLI: 'help': "Emulation tag slot.", }, 'dfu': new_uint(chameleon_cli_unit.HWDFU, "Restart application to bootloader mode(Not yet implement dfu)."), + 'settings': { + 'animation': { + 'get': new_uint(chameleon_cli_unit.HWSettingsAnimationGet, "Get current animation mode value"), + 'set': new_uint(chameleon_cli_unit.HWSettingsAnimationSet, "Change chameleon animation mode"), + 'help': 'Manage wake-up and sleep animation mode' + }, + 'store': new_uint(chameleon_cli_unit.HWSettingsStore, "Store current settings to flash"), + 'reset': new_uint(chameleon_cli_unit.HWSettingsReset, "Reset settings to default values"), + 'help': "Chameleon settings management" + }, 'help': "hardware controller", }, 'hf': { @@ -143,14 +153,15 @@ class ChameleonCLI: cmds = cmd_str.split(" ") cmd_maps: dict or types.FunctionType = self.cmd_maps cmd_end = "" + cmd_end_position = 0 for cmd in cmds: if cmd in cmd_maps: # CMD found in map, we can continue find next cmd_maps = cmd_maps[cmd] cmd_end = cmd + cmd_end_position += len(cmd) + 1 else: # CMD not found break - cmd_end_position = cmd_str.index(cmd_end) + len(cmd_end) + 1 - return cmd_maps, (cmd_str[:cmd_end_position], cmd_str[cmd_end_position:]) + return cmd_maps, (cmd_str[:cmd_end_position - 1], cmd_str[cmd_end_position:]) def startCLI(self): """ diff --git a/software/script/chameleon_cli_unit.py b/software/script/chameleon_cli_unit.py index 4cb0ded..378c922 100644 --- a/software/script/chameleon_cli_unit.py +++ b/software/script/chameleon_cli_unit.py @@ -994,3 +994,53 @@ class HWDFU(DeviceRequiredUnit): print(" - Enter success @.@~") # let time for comm thread to send dfu cmd and close port time.sleep(0.1) + +class HWSettingsAnimationGet(DeviceRequiredUnit): + def args_parser(self) -> ArgumentParserNoExit or None: + return None + def on_exec(self, args: argparse.Namespace): + resp: chameleon_com.Response = self.cmd_standard.get_settings_animation() + if resp.data[0] == 0: + print("Full animation") + elif resp.data[0] == 1: + print("Minimal animation") + elif resp.data[0] == 2: + print("No animation") + else: + print("Unknown setting value, something failed.") + +class HWSettingsAnimationSet(DeviceRequiredUnit): + def args_parser(self) -> ArgumentParserNoExit or None: + parser = ArgumentParserNoExit() + parser.add_argument('-m', '--mode', type=int, required=True, help="0 is full (default), 1 is minimal (only single pass on button wakeup), 2 is none", choices=[0, 1, 2]) + return parser + + def on_exec(self, args: argparse.Namespace): + mode = args.mode + self.cmd_standard.set_settings_animation(mode) + print("Animation mode change success. Do not forget to store your settings in flash!") + + +class HWSettingsStore(DeviceRequiredUnit): + def args_parser(self) -> ArgumentParserNoExit or None: + return None + + def on_exec(self, args: argparse.Namespace): + print("Storing settings...") + resp: chameleon_com.Response = self.cmd_standard.store_settings() + if resp.status == chameleon_status.Device.STATUS_DEVICE_SUCCESS: + print(" - Store success @.@~") + else: + print(" - Store failed") + +class HWSettingsReset(DeviceRequiredUnit): + def args_parser(self) -> ArgumentParserNoExit or None: + return None + + def on_exec(self, args: argparse.Namespace): + print("Initializing settings...") + resp: chameleon_com.Response = self.cmd_standard.reset_settings() + if resp.status == chameleon_status.Device.STATUS_DEVICE_SUCCESS: + print(" - Reset success @.@~") + else: + print(" - Reset failed") diff --git a/software/script/chameleon_cmd.py b/software/script/chameleon_cmd.py index 0f793d5..ab9e94a 100644 --- a/software/script/chameleon_cmd.py +++ b/software/script/chameleon_cmd.py @@ -20,6 +20,11 @@ DATA_CMD_ENTER_BOOTLOADER = 1010 DATA_CMD_GET_DEVICE_CHIP_ID = 1011 DATA_CMD_GET_DEVICE_ADDRESS = 1012 +DATA_CMD_SAVE_SETTINGS = 1013 +DATA_CMD_RESET_SETTINGS = 1014 +DATA_CMD_SET_ANIMATION_MODE = 1015 +DATA_CMD_GET_ANIMATION_MODE = 1016 + DATA_CMD_SCAN_14A_TAG = 2000 DATA_CMD_MF1_SUPPORT_DETECT = 2001 DATA_CMD_MF1_NT_LEVEL_DETECT = 2002 @@ -424,6 +429,30 @@ class BaseChameleonCMD: :return: """ return self.device.send_cmd_auto(DATA_CMD_ENTER_BOOTLOADER, 0x00, close=True) + + def get_settings_animation(self): + """ + Get animation mode value + """ + return self.device.send_cmd_sync(DATA_CMD_GET_ANIMATION_MODE, 0x00, None) + + def set_settings_animation(self, value: int): + """ + Set animation mode value + """ + return self.device.send_cmd_sync(DATA_CMD_SET_ANIMATION_MODE, 0x00, bytearray([value])) + + def reset_settings(self): + """ + Reset settings stored in flash memory + """ + return self.device.send_cmd_sync(DATA_CMD_RESET_SETTINGS, 0x00) + + def store_settings(self): + """ + Store settings to flash memory + """ + return self.device.send_cmd_sync(DATA_CMD_SAVE_SETTINGS, 0x00) class NegativeResponseError(Exception): diff --git a/software/script/chameleon_status.py b/software/script/chameleon_status.py index bab7cde..675aaea 100644 --- a/software/script/chameleon_status.py +++ b/software/script/chameleon_status.py @@ -41,6 +41,8 @@ class Device(metaclass=MetaDevice): STATUS_INVALID_CMD = 0x67 # 无效的指令 STATUS_DEVICE_SUCCESS = 0x68 # 设备相关操作成功执行 STATUS_NOT_IMPLEMENTED = 0x69 # 调用了某些未实现的操作，属于开发者遗漏的错误 + STATUS_FLASH_WRITE_FAIL = 0x70 # flash写入失败 + STATUS_FLASH_READ_FAIL = 0x71 # flash读取失败 message = { @@ -68,4 +70,6 @@ message = { Device.STATUS_INVALID_CMD : "API request fail, cmd invalid", Device.STATUS_DEVICE_SUCCESS : "Device operation succeeded", Device.STATUS_NOT_IMPLEMENTED : "Some api not implemented", + Device.STATUS_FLASH_WRITE_FAIL : "Flash write failed", + Device.STATUS_FLASH_READ_FAIL : "Flash read failed" }