2013-12-22 16:48:15 +01:00
|
|
|
/** @file */
|
|
|
|
|
|
|
|
|
|
/** @page Page_GettingStarted Getting Started
|
|
|
|
|
* The first thing you should do is to program the fuse bits and the bootloader
|
|
|
|
|
* to the Chameleon-Mini.
|
|
|
|
|
* Use your preferred tool to set the fuse bits as follows:
|
|
|
|
|
*
|
|
|
|
|
* - FUSE1: 0x00
|
|
|
|
|
* - FUSE2: 0xBE
|
|
|
|
|
* - FUSE4: 0xFF
|
2014-01-02 10:08:43 +01:00
|
|
|
* - FUSE5: 0xE9
|
2013-12-22 16:48:15 +01:00
|
|
|
*
|
|
|
|
|
* Next, program the appropriate bootloader from the Firmware/Bootloader directory into the chip.
|
|
|
|
|
* The ATxmega chip now automatically enumerates with its DFU bootloader.
|
|
|
|
|
* Now you can use Atmel's FLIP software or the open source dfu-programmer to program the
|
|
|
|
|
* Chameleon-Mini.hex/.eep into the FLASH and EEPROM using the bootloader. For this you should
|
|
|
|
|
* follow the instructions of the particular DFU tool.
|
|
|
|
|
* For windows machines, there is an example batch file in the Firmware/Chameleon-Mini directory.
|
|
|
|
|
*
|
|
|
|
|
* Once you have got the Chameleon up and running, it should enumerate as the LUFA CDC device.
|
|
|
|
|
* On windows, you should use the supplied LUFA VirtualSerial.inf in the Drivers folder.
|
|
|
|
|
* When the installation is successful, a new COM port or /dev/ttyS shows up on your system.
|
|
|
|
|
*
|
|
|
|
|
* This serial port is your means of controlling the Chameleon-Mini from any computer either
|
|
|
|
|
* using a simple terminal emulator, like TeraTerm or your self-crafted scripts and applications.
|
|
|
|
|
*
|
|
|
|
|
* More info on how to use the serial interface can be found here: @ref Page_CommandLine
|
|
|
|
|
*
|
|
|
|
|
*/
|
