import sys, os, time, datetime, json from gbz80disasm import opt_table from ctypes import c_int8 from copy import copy, deepcopy from labels import get_label_from_line, get_address_from_line_comment relative_jumps = [0x38, 0x30, 0x20, 0x28, 0x18, 0xc3, 0xda, 0xc2, 0x32] relative_unconditional_jumps = [0xc3, 0x18] call_commands = [0xdc, 0xd4, 0xc4, 0xcc, 0xcd] end_08_scripts_with = [ 0xe9, # jp hl 0xc9, # ret ] # possibly also: # 0xc3, # jp # 0xc18, # jr # 0xda, 0xe9, 0xd2, 0xc2, 0xca, 0x38, 0x30, 0x20, 0x28, 0x18, 0xd8, # 0xd0, 0xc0, 0xc8, 0xc9 spacing = "\t" class RomStr(str): """ Simple wrapper to prevent a giant rom from being shown on screen. """ def __init__(self, *args, **kwargs): if "labels" in kwargs.keys() and kwargs["labels"] == True: self.load_labels() str.__init__(self) def __repr__(self): """ Simplifies this object so that the output doesn't overflow stdout. """ return "RomStr(too long)" @classmethod def load(cls, crystal=True, red=False): """ Loads a ROM into a RomStr. """ if crystal and not red: file_handler = open("../baserom.gbc", "r") elif red and not crystal: file_handler = open("../pokered-baserom.gbc", "r") else: raise Exception, "not sure which rom to load?" bytes = file_handler.read() file_handler.close() return RomStr(bytes) def load_labels(self, filename="labels.json"): """ Loads labels from labels.json, or parses the source code file and generates new labels. """ filename = os.path.join(os.path.dirname(__file__), filename) # blank out the hash self.labels = {} # check if the labels file exists file_existence = os.path.exists(filename) generate_labels = False # determine if the labels file needs to be regenerated if file_existence: modified = os.path.getmtime(filename) modified = datetime.datetime.fromtimestamp(modified) current = datetime.datetime.fromtimestamp(time.time()) is_old = (current - modified) > datetime.timedelta(days=3) if is_old: generate_labels = True else: generate_labels = True # scan the asm source code for labels if generate_labels: asm = open(os.path.join(os.path.dirname(__file__), "../main.asm"), "r").read().split("\n") for line in asm: label = get_label_from_line(line) if label: address = get_address_from_line_comment(line) self.labels[address] = label content = json.dumps(self.labels) file_handler = open(filename, "w") file_handler.write(content) file_handler.close() # load the labels from the file self.labels = json.loads(open(filename, "r").read()) def length(self): """ len(self) """ return len(self) def len(self): """ len(self) """ return self.length() def interval(self, offset, length, strings=True, debug=True): """ returns hex values for the rom starting at offset until offset+length """ returnable = [] for byte in self[offset:offset+length]: if strings: returnable.append(hex(ord(byte))) else: returnable.append(ord(byte)) return returnable def until(self, offset, byte, strings=True, debug=False): """ Returns hex values from rom starting at offset until the given byte. """ return self.interval(offset, self.find(chr(byte), offset) - offset, strings=strings) def to_asm(self, address, end_address=None, size=None, max_size=0x4000, debug=None): """ Disassembles ASM at some address. This will stop disassembling when either the end_address or size is met. Also, there's a maximum size that will be parsed, so that large patches of data aren't parsed as code. """ if type(address) == str and "0x" in address: address = int(address, 16) start_address = address if start_address == None: raise Exception, "address must be given" if debug == None: if not hasattr(self, "debug"): debug = False else: debug = self.debug # this is probably a terrible idea.. why am i doing this? if size != None and max_size < size: raise Exception, "max_size must be greater than or equal to size" elif end_address != None and (end_address - start_address) > max_size: raise Exception, "end_address is out of bounds" elif end_address != None and size != None: if (end_address - start_address) >= size: size = end_address - start_address else: end_address = start_address + size elif end_address == None and size != None: end_address = start_address + size elif end_address != None and size == None: size = end_address - start_address return DisAsm(start_address=start_address, end_address=end_address, size=size, max_size=max_size, debug=debug, rom=self) class DisAsm: """ z80 disassembler """ def __init__(self, start_address=None, end_address=None, size=None, max_size=0x4000, debug=True, rom=None): assert start_address != None, "start_address must be given" if rom == None: file_handler = open("../baserom.gbc", "r") bytes = file_handler.read() file_handler.close() rom = RomStr(bytes) if debug not in [None, True, False]: raise Exception, "debug param is invalid" if debug == None: debug = False # get end_address and size in sync with each other if end_address == None and size != None: end_address = start_address + size elif end_address != None and size == None: size = end_address - start_address elif end_address != None and size != None: size = max(end_address - start_address, size) end_address = start_address + size # check that the bounds make sense if end_address != None: if end_address <= start_address: raise Exception, "end_address is out of bounds" elif (end_address - start_address) > max_size: raise Exception, "end_address goes beyond max_size" # check more edge cases if not start_address >= 0: raise Exception, "start_address must be at least 0" elif end_address != None and not end_address >= 0: raise Exception, "end_address must be at least 0" self.rom = rom self.start_address = start_address self.end_address = end_address self.size = size self.max_size = max_size self.debug = debug self.parse() def parse(self): """ Disassembles stuff and things. """ rom = self.rom start_address = self.start_address end_address = self.end_address max_size = self.max_size debug = self.debug bank_id = start_address / 0x4000 # [{"command": 0x20, "bytes": [0x20, 0x40, 0x50], # "asm": "jp $5040", "label": "Unknown5040"}] asm_commands = {} offset = start_address last_hl_address = None last_a_address = None used_3d97 = False keep_reading = True while (end_address != 0 and offset <= end_address) or keep_reading: # read the current opcode byte current_byte = ord(rom[offset]) current_byte_number = len(asm_commands.keys()) # setup this next/upcoming command if offset in asm_commands.keys(): asm_command = asm_commands[offset] else: asm_command = {} asm_command["address"] = offset if not "references" in asm_command.keys(): # This counts how many times relative jumps reference this # byte. This is used to determine whether or not to print out a # label later. asm_command["references"] = 0 # some commands have two opcodes next_byte = ord(rom[offset+1]) if self.debug: print "offset: \t\t" + hex(offset) print "current_byte: \t\t" + hex(current_byte) print "next_byte: \t\t" + hex(next_byte) # all two-byte opcodes also have their first byte in there somewhere if (current_byte in opt_table.keys()) or ((current_byte + (next_byte << 8)) in opt_table.keys()): # this might be a two-byte opcode possible_opcode = current_byte + (next_byte << 8) # check if this is a two-byte opcode if possible_opcode in opt_table.keys(): op_code = possible_opcode else: op_code = current_byte op = opt_table[op_code] opstr = op[0].lower() optype = op[1] if self.debug: print "opstr: " + opstr asm_command["type"] = "op" asm_command["id"] = op_code asm_command["format"] = opstr asm_command["opnumberthing"] = optype opstr2 = None base_opstr = copy(opstr) if "x" in opstr: for x in range(0, opstr.count("x")): insertion = ord(rom[offset + 1]) # Certain opcodes will have a local relative jump label # here instead of a raw hex value, but this is # controlled through asm output. insertion = "$" + hex(insertion)[2:] opstr = opstr[:opstr.find("x")].lower() + insertion + opstr[opstr.find("x")+1:].lower() if op_code in relative_jumps: target_address = offset + 2 + c_int8(ord(rom[offset + 1])).value insertion = "asm_" + hex(target_address) if str(target_address) in self.rom.labels.keys(): insertion = self.rom.labels[str(target_address)] opstr2 = base_opstr[:base_opstr.find("x")].lower() + insertion + base_opstr[base_opstr.find("x")+1:].lower() asm_command["formatted_with_labels"] = opstr2 asm_command["target_address"] = target_address current_byte_number += 1 offset += 1 if "?" in opstr: for y in range(0, opstr.count("?")): byte1 = ord(rom[offset + 1]) byte2 = ord(rom[offset + 2]) number = byte1 number += byte2 << 8; # In most cases, you can use a label here. Labels will # be shown during asm output. insertion = "$%.4x" % (number) opstr = opstr[:opstr.find("?")].lower() + insertion + opstr[opstr.find("?")+1:].lower() # This version of the formatted string has labels. In # the future, the actual labels should be parsed # straight out of the "main.asm" file. target_address = number % 0x4000 insertion = "asm_" + hex(target_address) if str(target_address) in self.rom.labels.keys(): insertion = self.rom.labels[str(target_address)] opstr2 = base_opstr[:base_opstr.find("?")].lower() + insertion + base_opstr[base_opstr.find("?")+1:].lower() asm_command["formatted_with_labels"] = opstr2 asm_command["target_address"] = target_address current_byte_number += 2 offset += 2 # Check for relative jumps, construct the formatted asm line. # Also set the usage of labels. if current_byte in [0x18, 0x20] + relative_jumps: # jr or jr nz # generate a label for the byte we're jumping to target_address = offset + 1 + c_int8(ord(rom[offset])).value if target_address in asm_commands.keys(): asm_commands[target_address]["references"] += 1 remote_label = "asm_" + hex(target_address) asm_commands[target_address]["current_label"] = remote_label asm_command["remote_label"] = remote_label # Not sure how to set this, can't be True because an # address referenced multiple times will use a label # despite the label not necessarily being used in the # output. The "use_remote_label" values should be # calculated when rendering the asm output, based on # which addresses and which op codes will be displayed # (within the range). asm_command["use_remote_label"] = "unknown" else: remote_label = "asm_" + hex(target_address) # This remote address might not be part of this # function. asm_commands[target_address] = { "references": 1, "current_label": remote_label, "address": target_address, } # Also, target_address can be negative (before the # start_address that the user originally requested), # and it shouldn't be shown on asm output because the # intermediate bytes (between a negative target_address # and start_address) won't be disassembled. # Don't know yet if this remote address is part of this # function or not. When the remote address is not part # of this function, the label name should not be used, # because that label will not be disassembled in the # output, until the user asks it to. asm_command["use_remote_label"] = "unknown" asm_command["remote_label"] = remote_label elif current_byte == 0x3e: last_a_address = ord(rom[offset + 1]) # store the formatted string for the output later asm_command["formatted"] = opstr if current_byte == 0x21: last_hl_address = byte1 + (byte2 << 8) # this is leftover from pokered, might be meaningless if current_byte == 0xcd: if number == 0x3d97: used_3d97 = True if current_byte == 0xc3 or current_byte in relative_unconditional_jumps: if current_byte == 0xc3: if number == 0x3d97: used_3d97 = True # stop reading at a jump, relative jump or return if current_byte in end_08_scripts_with: is_data = False if not self.has_outstanding_labels(asm_commands, offset): keep_reading = False break else: keep_reading = True else: keep_reading = True else: # This shouldn't really happen, and means that this area of the # ROM probably doesn't represent instructions. asm_command["type"] = "data" # db asm_command["value"] = current_byte keep_reading = False # save this new command in the list asm_commands[asm_command["address"]] = asm_command # jump forward by a byte offset += 1 # also save the last command if necessary if len(asm_commands.keys()) > 0 and asm_commands[asm_commands.keys()[-1]] is not asm_command: asm_commands[asm_command["address"]] = asm_command # store the set of commands on this object self.asm_commands = asm_commands self.end_address = offset + 1 self.last_address = self.end_address def has_outstanding_labels(self, asm_commands, offset): """ Checks if there are any labels that haven't yet been created. """ # is this really necessary?? return False def used_addresses(self): """ Returns a list of unique addresses that this function will probably call. """ addresses = set() for (id, command) in self.asm_commands.items(): if command.has_key("target_address") and command["id"] in call_commands: addresses.add(command["target_address"]) return addresses def __str__(self): """ ASM pretty printer. """ output = "" for (key, line) in self.asm_commands.items(): # skip anything from before the beginning if key < self.start_address: continue # show a label if line["references"] > 0 and "current_label" in line.keys(): if line["address"] == self.start_address: output += "thing: ; " + hex(line["address"]) + "\n" else: output += "." + line["current_label"] + "\@ ; " + hex(line["address"]) + "\n" # show the actual line if line.has_key("formatted_with_labels"): output += spacing + line["formatted_with_labels"] elif line.has_key("formatted"): output += spacing + line["formatted"] #output += " ; to " + output += "\n" # show the next address after this chunk output += "; " + hex(self.end_address) return output class AsmList(list): """ Simple wrapper to prevent all asm lines from being shown on screen. """ def length(self): """ len(self) """ return len(self) def __repr__(self): """ Simplifies this object so that the output doesn't overflow stdout. """ return "AsmList(too long)" if __name__ == "__main__": cryrom = RomStr(open("../pokecrystal.gbc", "r").read()); asm = cryrom.to_asm(sys.argv[1]) print asm