pokecrystal-board/docs/design_flaws.md

# Design Flaws


## Contents

- [Pic banks are offset by `PICS_FIX`](#pic-banks-are-offset-by-pics_fix)
- [`PokemonPicPointers` and `UnownPicPointers` are assumed to start at the same address](#pokemonpicpointers-and-unownpicpointers-are-assumed-to-start-at-the-same-address)
- [Footprints are split into top and bottom halves](#footprints-are-split-into-top-and-bottom-halves)
- [Pokédex entry banks are derived from their species IDs](#pokédex-entry-banks-are-derived-from-their-species-ids)
- [`ITEM_C3` and `ITEM_DC` break up the continuous sequence of TM items](#item_c3-and-item_dc-break-up-the-continuous-sequence-of-tm-items)


## Pic banks are offset by `PICS_FIX`

[data/pokemon/pic_pointers.asm](/data/pokemon/pic_pointers.asm), [data/pokemon/unown_pic_pointers.asm](/data/pokemon/unown_pic_pointers.asm), and [data/trainers/pic_pointers.asm](/data/trainers/pic_pointers.asm) all have to use `dba_pic` instead of `dba`. This is a macro in [macros/data.asm](/macros/data.asm) that offsets banks by `PICS_FIX`:

```asm
dba_pic: MACRO ; dbw bank, address
	db BANK(\1) - PICS_FIX
	dw \1
ENDM
```

The offset is translated into a correct bank by `FixPicBank` in [gfx/load_pics.asm](/gfx/load_pics.asm):

```asm
FixPicBank: ; 511c5
; This is a thing for some reason.

PICS_FIX EQU $36
GLOBAL PICS_FIX

	push hl
	push bc
	sub BANK(Pics_1) - PICS_FIX
	ld c, a
	ld b, 0
	ld hl, .PicsBanks
	add hl, bc
	ld a, [hl]
	pop bc
	pop hl
	ret

.PicsBanks: ; 511d4
	db BANK(Pics_1) + 0
	db BANK(Pics_1) + 1
	db BANK(Pics_1) + 2
	db BANK(Pics_1) + 3
	db BANK(Pics_1) + 4
	db BANK(Pics_1) + 5
	db BANK(Pics_1) + 6
	db BANK(Pics_1) + 7
	db BANK(Pics_1) + 8
	db BANK(Pics_1) + 9
	db BANK(Pics_1) + 10
	db BANK(Pics_1) + 11
	db BANK(Pics_1) + 12
	db BANK(Pics_1) + 13
	db BANK(Pics_1) + 14
	db BANK(Pics_1) + 15
	db BANK(Pics_1) + 16
	db BANK(Pics_1) + 17
	db BANK(Pics_1) + 18
	db BANK(Pics_1) + 19
	db BANK(Pics_1) + 20
	db BANK(Pics_1) + 21
	db BANK(Pics_1) + 22
	db BANK(Pics_1) + 23
```


## `PokemonPicPointers` and `UnownPicPointers` are assumed to start at the same address

In [gfx/pics.asm](/gfx/pics.asm):

```asm
; PokemonPicPointers and UnownPicPointers are assumed to start at the same
; address, but in different banks. This is enforced in pokecrystal.link.

SECTION "Pic Pointers", ROMX

INCLUDE "data/pokemon/pic_pointers.asm"


SECTION "Unown Pic Pointers", ROMX

INCLUDE "data/pokemon/unown_pic_pointers.asm"
```

Two routines in [gfx/load_pics.asm](/gfx/load_pics.asm) make this assumption; `GetFrontpicPointer`:

```asm
	ld a, [CurPartySpecies]
	cp UNOWN
	jr z, .unown
	ld a, [CurPartySpecies]
	ld d, BANK(PokemonPicPointers)
	jr .ok

.unown
	ld a, [UnownLetter]
	ld d, BANK(UnownPicPointers)

.ok
	ld hl, PokemonPicPointers ; UnownPicPointers
	dec a
	ld bc, 6
	call AddNTimes
```

And `GetMonBackpic`:

```asm
	; These are assumed to be at the same
	; address in their respective banks.
	GLOBAL PokemonPicPointers,  UnownPicPointers
	ld hl, PokemonPicPointers ; UnownPicPointers
	ld a, b
	ld d, BANK(PokemonPicPointers)
	cp UNOWN
	jr nz, .ok
	ld a, c
	ld d, BANK(UnownPicPointers)
.ok
	dec a
	ld bc, 6
	call AddNTimes
```


## Footprints are split into top and bottom halves

In [gfx/footprints.asm](/gfx/footprints.asm):

```asm
; Footprints are 2x2 tiles each, but are stored as a 16x64-tile image
; (32 rows of 8 footprints per row).
; That means there's a row of the top two tiles for eight footprints,
; then a row of the bottom two tiles for those eight footprints.

; These macros help extract the first and the last two tiles, respectively.
footprint_top    EQUS "0,                 2 * LEN_1BPP_TILE"
footprint_bottom EQUS "2 * LEN_1BPP_TILE, 2 * LEN_1BPP_TILE"

; Entries correspond to Pokémon species, two apiece, 8 tops then 8 bottoms

; 001-008 top halves
INCBIN "gfx/footprints/bulbasaur.1bpp",  footprint_top
INCBIN "gfx/footprints/ivysaur.1bpp",    footprint_top
INCBIN "gfx/footprints/venusaur.1bpp",   footprint_top
INCBIN "gfx/footprints/charmander.1bpp", footprint_top
INCBIN "gfx/footprints/charmeleon.1bpp", footprint_top
INCBIN "gfx/footprints/charizard.1bpp",  footprint_top
INCBIN "gfx/footprints/squirtle.1bpp",   footprint_top
INCBIN "gfx/footprints/wartortle.1bpp",  footprint_top
; 001-008 bottom halves
INCBIN "gfx/footprints/bulbasaur.1bpp",  footprint_bottom
INCBIN "gfx/footprints/ivysaur.1bpp",    footprint_bottom
INCBIN "gfx/footprints/venusaur.1bpp",   footprint_bottom
INCBIN "gfx/footprints/charmander.1bpp", footprint_bottom
INCBIN "gfx/footprints/charmeleon.1bpp", footprint_bottom
INCBIN "gfx/footprints/charizard.1bpp",  footprint_bottom
INCBIN "gfx/footprints/squirtle.1bpp",   footprint_bottom
INCBIN "gfx/footprints/wartortle.1bpp",  footprint_bottom
...
```

`Pokedex_LoadAnyFootprint` in [engine/pokedex.asm](/engine/pokedex.asm):

```asm
	push hl
	ld e, l
	ld d, h
	ld hl, VTiles2 tile $62
	lb bc, BANK(Footprints), 2
	call Request1bpp
	pop hl

	; Whoever was editing footprints forgot to fix their
	; tile editor. Now each bottom half is 8 tiles off.
	ld de, 8 tiles
	add hl, de

	ld e, l
	ld d, h
	ld hl, VTiles2 tile $64
	lb bc, BANK(Footprints), 2
	call Request1bpp
```


## Pokédex entry banks are derived from their species IDs

`PokedexDataPointerTable` in [data/pokemon/dex_entry_pointers.asm](/data/pokemon/dex_entry_pointers.asm) is a table of `dw`, not `dba`, yet there are four banks used for Pokédex entries. The correct bank is derived from the species ID at the beginning of each entry. (This is the only use that species ID has.)

Three separate routines do the same derivation; `GetDexEntryPointer` in [engine/pokedex_2.asm](/engine/pokedex_2.asm):

```asm
GetDexEntryPointer: ; 44333
; return dex entry pointer b:de
	push hl
	ld hl, PokedexDataPointerTable
	ld a, b
	dec a
	ld d, 0
	ld e, a
	add hl, de
	add hl, de
	ld e, [hl]
	inc hl
	ld d, [hl]
	push de
	rlca
	rlca
	and $3
	ld hl, .PokedexEntryBanks
	ld d, 0
	ld e, a
	add hl, de
	ld b, [hl]
	pop de
	pop hl
	ret

.PokedexEntryBanks: ; 44351

GLOBAL PokedexEntries1
GLOBAL PokedexEntries2
GLOBAL PokedexEntries3
GLOBAL PokedexEntries4

	db BANK(PokedexEntries1)
	db BANK(PokedexEntries2)
	db BANK(PokedexEntries3)
	db BANK(PokedexEntries4)
```

`GetPokedexEntryBank` in [engine/item_effects.asm](/engine/item_effects.asm):

```asm
GetPokedexEntryBank:
	push hl
	push de
	ld a, [EnemyMonSpecies]
	rlca
	rlca
	and 3
	ld hl, .PokedexEntryBanks
	ld d, 0
	ld e, a
	add hl, de
	ld a, [hl]
	pop de
	pop hl
	ret

.PokedexEntryBanks:

GLOBAL PokedexEntries1
GLOBAL PokedexEntries2
GLOBAL PokedexEntries3
GLOBAL PokedexEntries4

	db BANK(PokedexEntries1)
	db BANK(PokedexEntries2)
	db BANK(PokedexEntries3)
	db BANK(PokedexEntries4)
```

And `PokedexShow_GetDexEntryBank` in [engine/radio.asm](/engine/radio.asm):

```asm
PokedexShow_GetDexEntryBank:
	push hl
	push de
	ld a, [CurPartySpecies]
	dec a
	rlca
	rlca
	and 3
	ld hl, .pokedexbanks
	ld d, 0
	ld e, a
	add hl, de
	ld a, [hl]
	pop de
	pop hl
	ret

.pokedexbanks
	db BANK(PokedexEntries1)
	db BANK(PokedexEntries2)
	db BANK(PokedexEntries3)
	db BANK(PokedexEntries4)
```


## `ITEM_C3` and `ITEM_DC` break up the continuous sequence of TM items

[constants/item_constants.asm](/constants/item_constants.asm) defined the 50 TMs in order with `add_tm`, but `ITEM_C3` and `ITEM_DC` break up that sequence.

```asm
	add_tm DYNAMICPUNCH ; $BF
	...
	add_tm ROLLOUT      ; $C2
	const ITEM_C3       ; $C3
	add_tm ROAR         ; $C4
	...
	add_tm DIG          ; $DB
	const ITEM_DC       ; $DC
	add_tm PSYCHIC_M    ; $DD
	...
	add_tm NIGHTMARE    ; $F2
NUM_TMS = const_value - TM01 - 2 ; discount ITEM_C3 and ITEM_DC
```

`GetTMHMNumber` and `GetNumberedTMHM` in [engine/items.asm](/engine/items.asm) have to compensate for this:

```asm
GetTMHMNumber:: ; d407
; Return the number of a TM/HM by item id c.
	ld a, c
; Skip any dummy items.
	cp ITEM_C3 ; TM04-05
	jr c, .done
	cp ITEM_DC ; TM28-29
	jr c, .skip
	dec a
.skip
	dec a
.done
	sub TM01
	inc a
	ld c, a
	ret

GetNumberedTMHM: ; d417
; Return the item id of a TM/HM by number c.
	ld a, c
; Skip any gaps.
	cp ITEM_C3 - (TM01 - 1)
	jr c, .done
	cp ITEM_DC - (TM01 - 1) - 1
	jr c, .skip_one
.skip_two
	inc a
.skip_one
	inc a
.done
	add TM01
	dec a
	ld c, a
	ret
```