This CL addresses the following major issues:
- When an application releases memory to the sentry, the sentry unconditionally
releases that memory to the host, rather than allowing it to be reused for
future allocations, in order to ensure that new allocations are uniformly
decommitted (use no memory): cl/145016083. In most cases, this should have
relatively little performance impact; since releasing memory from the
application to the OS is expensive even outside of gVisor, application memory
allocators optimizing for performance already limit the rate at which they
release memory to the OS. However, in applications that involve frequent
process creation and exit (e.g. build systems), this practice prevents reuse
of memory deallocated by exiting processes for memory allocated by new
processes, resulting in both performance degradation and a spike in memory
usage (since the sentry may not have released all deallocated memory to the
host by the time new allocations occur).
- gVisor's historical approach to application THP is based on THP being enabled
on a per-memfd basis, using the MFD_HUGEPAGE flag not merged into the
upstream Linux kernel
(https://patchwork.kernel.org/project/linux-mm/patch/c140f56a-1aa3-f7ae-b7d1-93da7d5a3572@google.com/).
Thus, on vanilla Linux kernels, gVisor cannot use THP for application memory
without requiring the system to enable THP for all tmpfs files and memfds (by
setting /sys/kernel/mm/transparent_hugepage/shmem_enabled to "always" or
"force").
- Both MM and the application page allocator (pgalloc) are agnostic as to
whether the underlying memory file will be THP-backed. Instead, both attempt
to align hugepage-sized and larger allocations to hugepage boundaries, such
that if the memory file happens to support THP then such allocations will be
appropriately aligned to use THP. This is suboptimal since many allocations
do not benefit from THP, resulting in memory underutilization.
These issues are especially relevant to platforms based on hardware
virtualization, where acquiring memory from the host is significantly more
expensive due to EPT/NPT fault overhead; when effective, THP reduces the
frequency with which said cost is incurred by a factor of 512, and page reuse
avoids incurring it at all.
Thus:
- Instead of inferring whether THP use is desired from allocation size,
indicate this explicitly as AllocOpts.Huge, and only set it to true for
allocations for non-stack private anonymous mappings.
- Add AllocateCallerIndirectCommit, a new possible value for AllocOpts.Mode
that indicates that the caller will commit all pages in the allocation. In
such cases, pgalloc can reuse deallocated pages without risking increased
memory usage, internally referred to as "recycling".
AllocateCallerIndirectCommit is used primarily for page faults on a
THP-backed region. (It is also used for single-page allocations on non-THP
backed regions, but due to expansion of faults to mm.privateAllocUnit-aligned
ranges, this is relatively uncommon.)
- Allow different chunks in pgalloc.MemoryFile's backing file to have varying
THP-ness, indicated to the host using MADV_HUGEPAGE/NOHUGEPAGE.
- Split pgalloc.MemoryFile's existing page metadata set into two sets tracking
deallocated pages for small/huge-page-backed regions respectively; two sets
tracking in-use pages for small/huge-page-backed regions respectively; and a
fifth set tracking memory accounting state.
- Add MemoryFileOpts.DisableMemoryAccounting; this is primarily intended for
pgalloc tests, but may also be applicable to disk-backed MemoryFiles.
Cleanup:
- Remove MemoryFile.usageSwapped; the UpdateUsage() optimization it enabled,
described in updateUsageLocked(), was based on the condition that
MemoryFile.mu would be locked throughout the call to updateUsageLocked(),
which was invalidated by cl/337865250.
- Remove MemoryFileOpts.ManualZeroing, which is unused.
- Rename "reclaiming" to "releasing"; the former is confusing since "reclaim"
in Linux has a significantly different meaning (essentially "eviction" in
pgalloc), and the latter seems to be conventional in user-mode memory
allocators.
Using THP for application memory requires setting
/sys/kernel/mm/transparent_hugepage/shmem_enabled to "advise", in order to
allow runsc to request THP from the kernel.
After this CL, pgalloc.MemoryFile still releases memory to the host as fast as
possible, limiting the effectiveness of page recycling. A following CL adds
optional memory release throttling to improve this.
Performance outcomes vary by workload and platform. (In all of the below,
"baseline" is without this CL, "expt" is with this CL, and "expt2" is with this
CL + reclaim throttling (cl/575046398).)
For systrap in GKE: As noted, this change is required to enable application THP
without forcing it on all host shmem users. In conjunction with recycling
(which has a relatively small effect on systrap since it does not use hardware
virtualization), THP use slightly improves performance, although whether this
is measurable is case-dependent. On an idle VM, with shmem_enabled = "advise":
```
goos: linux
goarch: amd64
cpu: Intel(R) Xeon(R) CPU @ 2.80GHz
│ baseline │ expt │ expt2 │
│ sec/op │ sec/op vs base │ sec/op vs base │
BuildABSL/page_cache.clean/filesystem.bindfs-16 39.09 ± 4% 38.84 ± 5% ~ (p=0.947 n=30) 38.84 ± 3% ~ (p=0.854 n=30)
BuildABSL/page_cache.dirty/filesystem.bindfs-16 37.83 ± 3% 36.58 ± 4% ~ (p=0.057 n=30) 36.83 ± 5% ~ (p=0.314 n=30)
BuildABSL/page_cache.clean/filesystem.tmpfs-16 39.34 ± 3% 38.59 ± 4% ~ (p=0.350 n=30) 38.58 ± 4% ~ (p=0.300 n=30)
BuildABSL/page_cache.dirty/filesystem.tmpfs-16 37.83 ± 3% 36.08 ± 4% -4.64% (p=0.026 n=30) 36.58 ± 4% ~ (p=0.123 n=30)
BuildABSL/page_cache.clean/filesystem.rootfs-16 39.59 ± 4% 38.83 ± 3% ~ (p=0.485 n=30) 40.09 ± 5% ~ (p=0.971 n=30)
BuildABSL/page_cache.dirty/filesystem.rootfs-16 36.83 ± 3% 38.08 ± 5% ~ (p=0.307 n=30) 38.08 ± 1% ~ (p=0.242 n=30)
BuildABSL/page_cache.clean/filesystem.fusefs-16 38.34 ± 3% 37.59 ± 5% ~ (p=0.752 n=30) 38.59 ± 3% ~ (p=0.982 n=30)
BuildABSL/page_cache.dirty/filesystem.fusefs-16 37.58 ± 4% 38.08 ± 5% ~ (p=0.708 n=30) 36.08 ± 6% ~ (p=0.127 n=30)
BuildGRPC/page_cache.clean/filesystem.bindfs-16 212.7 ± 2% 211.0 ± 1% ~ (p=0.138 n=30) 211.2 ± 1% ~ (p=0.458 n=30)
BuildGRPC/page_cache.dirty/filesystem.bindfs-16 210.0 ± 1% 210.0 ± 1% ~ (p=0.542 n=30) 209.7 ± 1% ~ (p=0.665 n=30)
BuildGRPC/page_cache.clean/filesystem.rootfs-16 210.5 ± 1% 210.0 ± 1% ~ (p=0.423 n=30) 210.0 ± 1% ~ (p=0.142 n=30)
BuildGRPC/page_cache.dirty/filesystem.rootfs-16 210.2 ± 1% 209.0 ± 1% ~ (p=0.219 n=30) 209.5 ± 1% ~ (p=0.230 n=30)
geomean 67.62 66.97 -0.96% 67.12 -0.74%
```
The KVM platform benefits significantly from reduced nested page faults due to
huge pages, and to a lesser extent due to recycling:
```
goos: linux
goarch: amd64
cpu: Intel(R) Xeon(R) W-2135 CPU @ 3.70GHz
│ baseline │ expt │ expt2 │
│ sec/op │ sec/op vs base │ sec/op vs base │
BuildABSL/page_cache.clean/filesystem.bindfs-12 43.11 ± 2% 39.35 ± 3% -8.71% (p=0.000 n=20) 38.10 ± 4% -11.63% (p=0.000 n=20+19)
BuildABSL/page_cache.dirty/filesystem.bindfs-12 42.35 ± 3% 39.09 ± 4% -7.69% (p=0.000 n=20+19) 39.09 ± 5% -7.69% (p=0.000 n=20+19)
BuildABSL/page_cache.clean/filesystem.tmpfs-12 42.35 ± 3% 38.34 ± 5% -9.46% (p=0.000 n=20) 38.59 ± 3% -8.87% (p=0.000 n=20+19)
BuildABSL/page_cache.dirty/filesystem.tmpfs-12 42.09 ± 1% 37.59 ± 4% -10.70% (p=0.000 n=20) 38.09 ± 4% -9.51% (p=0.000 n=20+19)
BuildABSL/page_cache.clean/filesystem.rootfs-12 42.85 ± 3% 38.84 ± 3% -9.35% (p=0.000 n=20) 39.09 ± 3% -8.77% (p=0.000 n=20+17)
BuildABSL/page_cache.dirty/filesystem.rootfs-12 41.85 ± 2% 39.59 ± 6% -5.40% (p=0.000 n=20+19) 38.09 ± 3% -9.00% (p=0.000 n=20+19)
BuildABSL/page_cache.clean/filesystem.fusefs-12 42.60 ± 2% 38.34 ± 2% -10.00% (p=0.000 n=20) 39.59 ± 3% -7.06% (p=0.000 n=20+19)
BuildABSL/page_cache.dirty/filesystem.fusefs-12 42.09 ± 4% 39.09 ± 3% -7.13% (p=0.000 n=20) 38.09 ± 3% -9.52% (p=0.000 n=20+19)
BuildGRPC/page_cache.clean/filesystem.bindfs-12 207.7 ± 1% 206.4 ± 0% -0.60% (p=0.018 n=20) 205.9 ± 1% -0.85% (p=0.001 n=20+19)
BuildGRPC/page_cache.dirty/filesystem.bindfs-12 206.9 ± 1% 206.9 ± 1% ~ (p=0.121 n=20) 204.4 ± 1% -1.22% (p=0.004 n=20+19)
BuildGRPC/page_cache.clean/filesystem.rootfs-12 207.7 ± 1% 204.9 ± 1% -1.33% (p=0.004 n=20) 203.9 ± 0% -1.81% (p=0.000 n=20+19)
BuildGRPC/page_cache.dirty/filesystem.rootfs-12 206.9 ± 1% 204.9 ± 0% -0.97% (p=0.004 n=20+19) 203.9 ± 0% -1.45% (p=0.000 n=20+19)
geomean 71.97 67.63 -6.03% 67.28 -6.52%
```
PiperOrigin-RevId: 647771821
We want to decouple the netstack from the kernel. This coupling is
causing bugs in restore because netstack needs to be created before the Kernel
is restored. So right now, netstack ends up using a "temporary" Kernel which is
later destroyed in the restore sequence, but netstack keeps referencing it.
Before this change, netstack was being initialized with a `kernel.TimeKeeper`.
This `Timekeeper` was being initialized with `VDSOParamPage`, which references
the MemoryFile of the kernel. So as a result, on restore the netstack ends up
referencing the destroyed kernel's MemoryFile.
So instead move out VDSOParamPage from TimeKeeper altogether. The callers of
`TimeKeeper.SetClocks()` and `TimeKeeper.ResumeUpdates()` pass VDSOParamPage
from the correct kernel being used currently.
PiperOrigin-RevId: 647168588
The work done in c087777e37 ("Plumb restore context to afterLoad()") makes
pgalloc.MemoryFileProvider redundant as structs can now easily restore
pgalloc.MemoryFile in stateify's afterLoad() method. This allows structs to
have a pgalloc.MemoryFile field and use that directly, instead of going through
the provided interface.
This cleans up a lot of code and also should be more performant (avoids an
interface method call on many hot paths).
PiperOrigin-RevId: 615258927
It is an idea of running codespell as part of our presubmit checks.
Before enabling it for new changes, let's fix what it has found.
Signed-off-by: Andrei Vagin <avagin@gmail.com>
This moves the initialization of `cpuid.hostFeatureSet` out of package-level
`init` and instead moves it to an explicit `cpuid.Initialize()` function.
On AMD64, this saves about 512KiB of heap memory that would otherwise always
be live.
PiperOrigin-RevId: 514896323
This moves the initialization of `seccheck.Points` out of package-level
`init` and instead moves it to an explicit `seccheck.Initialize()` function.
On AMD64, this saves about 614KiB of heap memory that would otherwise always
be live.
PiperOrigin-RevId: 514813332
This allows overriding the path used to access the kernel's KVM device file,
typically at `/dev/kvm`, with a flag-controlled path instead.
PiperOrigin-RevId: 431073099
Weirdness metric contains fields to track the number of clock fallback,
partial result and vsyscalls. This metric will avoid the overhead of
having three different metrics (fallbackMetric, partialResultMetric,
vsyscallCount).
PiperOrigin-RevId: 369970218
Split usermem package to help remove syserror dependency in go_marshal.
New hostarch package contains code not dependent on syserror.
PiperOrigin-RevId: 365651233
These are primarily simplification and lint mistakes. However, minor
fixes are also included and tests added where appropriate.
PiperOrigin-RevId: 351425971
This reduces confusion with context.Context (which is also relevant to
kernel.Tasks) and is consistent with existing function kernel.LoadTaskImage().
PiperOrigin-RevId: 342167298
gVisor bot
cweld510
Jamie LiuandgVisor bot
Ayush RanjanandgVisor bot
Andrei Vagin
Andrei VaginandgVisor bot
Etienne PerotandgVisor bot
Adin ScannellandgVisor bot
Tamir DubersteinandgVisor bot
Nayana BidariandgVisor bot
Zach KoopmansandgVisor bot