Files

78 lines
1.7 KiB
C

/*
* APUresetbtn.c
*
* part of pfSense (https://www.pfsense.org)
* Copyright (c) 2014-2025 Rubicon Communications, LLC (Netgate)
* All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <sys/types.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <unistd.h>
int
main(int argc, char *argv[])
{
int iofd, i;
u_char ch = 0;
iofd = open("/dev/gpioapu", O_RDWR);
if (iofd == -1) {
perror("cannot open /dev/gpioapu");
exit(1);
}
/* check whether the switch S1 is pressed */
read(iofd, &ch, sizeof(ch));
if (ch == '1') {
/* nothing to do */
exit(0);
}
/* wait for 2 seconds and make sure that the switch is
pressed all the time */
for (i = 0; i < 20; i++) {
usleep(100000);
read(iofd, &ch, sizeof(ch));
if (ch == '1') {
/* switch was released too soon */
exit(2);
}
}
/* blink all three LEDs five times to indicate reset */
for (i = 0; i < 5; i++) {
write(iofd, "111", strlen("111"));
usleep(300000);
write(iofd, "000", strlen("000"));
usleep(300000);
}
/* restore normal LED state */
write(iofd, "100", strlen("100"));
close(iofd);
/* return special code 99 to indicate factory defaults should be loaded */
exit(99);
/* NOTREACHED */
return 0;
}