linux-packaging-mono/external/bdwgc/doc/README.macros

The collector uses a large amount of conditional compilation in order to
deal with platform dependencies.  This violates a number of known coding
standards.  On the other hand, it seems to be the only practical way to
support this many platforms without excessive code duplication.

A few guidelines have mostly been followed in order to keep this manageable:

1) #if and #ifdef directives are properly indented whenever easily possible.
All known C compilers allow whitespace between the "#" and the "if" to make
this possible.  ANSI C also allows white space before the "#", though we
avoid that.  It has the known disadvantages that it differs from the normal
GNU conventions, and that it makes patches larger than otherwise necessary.
In my opinion, it's still well worth it, for the same reason that we indent
ordinary "if" statements.

2) Whenever possible, tests are performed on the macros defined in gcconfig.h
instead of directly testing platform-specific predefined macros.  This makes
it relatively easy to adapt to new compilers with a different set of
predefined macros.  Currently these macros generally identify platforms
instead of features.  In many cases, this is a mistake.

Many of the tested configuration macros are at least somewhat defined in
either include/private/gcconfig.h or in Makefile.direct.  Here is an attempt
at documenting these macros:  (Thanks to Walter Bright for suggesting
this.  This is a work in progress)

MACRO           EXPLANATION
-----           -----------

GC_DEBUG        Tested by gc.h.  Causes all-upper-case macros to
                expand to calls to debug versions of collector routines.

GC_NAMESPACE    Tested by gc_cpp.h. Causes gc_cpp symbols to be defined
                in "boehmgc" namespace.

GC_DEBUG_REPLACEMENT    Tested by gc.h. Causes GC_MALLOC/REALLOC() to be
                defined as GC_debug_malloc/realloc_replacement().

GC_NO_THREAD_REDIRECTS  Tested by gc.h.  Prevents redirection of thread
                creation routines etc. to GC_ versions.  Requires the
                programmer to explicitly handle thread registration.

GC_NO_THREAD_DECLS      Tested by gc.h.  MS Windows only.  Do not declare
                Windows thread creation routines and do not include windows.h.

GC_DONT_INCLUDE_WINDOWS_H   Tested by gc.h.  MS Windows only.  Do not include
                windows.h from gc.h (but Windows-specific thread creation
                routines are declared).

GC_UNDERSCORE_STDCALL   Tested by gc.h.  Explicitly prefix exported/imported
                WINAPI (__stdcall) symbols with '_' (underscore).  Could be
                used with MinGW (for x86) compiler (in conjunction with
                GC_DLL) to follow MS conventions for __stdcall symbols naming.

_ENABLE_ARRAYNEW
                #define'd by the Digital Mars C++ compiler when
                operator new[] and delete[] are separately
                overloadable. Used in gc_cpp.h.

_DLL            Tested by gc_config_macros.h. Defined by Visual C++ if runtime
                dynamic libraries are in use.  Used (only if none of GC_DLL,
                GC_NOT_DLL, __GNUC__ are defined) to test whether
                __declspec(dllimport) needs to be added to declarations
                to support the case in which the collector is in a DLL.

GC_DLL          Defined by user if dynamic libraries are being built
                or used.  Also set by gc.h if _DLL is defined (except for
                mingw) while GC_NOT_DLL and __GNUC__ are both undefined.
                This is the macro that is tested internally to determine
                whether the GC is in its own dynamic library.  May need
                to be set by clients before including gc.h.  Note that
                inside the GC implementation it indicates that the
                collector is in its own dynamic library, should export
                its symbols, etc.  But in clients it indicates that the
                GC resides in a different DLL, its entry points should
                be referenced accordingly, and precautions may need to
                be taken to properly deal with statically allocated
                variables in the main program.  Used for MS Windows.
                Also used by GCC v4+ (only when the dynamic shared library
                is being built) to hide internally used symbols.

GC_NOT_DLL      User-settable macro that overrides _DLL, e.g. if runtime
                dynamic libraries are used, but the collector is in a static
                library.  Tested by gc_config_macros.h.

GC_REQUIRE_WCSDUP       Force GC to export GC_wcsdup() (the Unicode version
                of GC_strdup); could be useful in the leak-finding mode.


These define arguments influence the collector configuration:

FIND_LEAK       Causes GC_find_leak to be initially set.  This causes the
  collector to assume that all inaccessible objects should have been
  explicitly deallocated, and reports exceptions.  Finalization and the test
  program are not usable in this mode.

GC_FINDLEAK_DELAY_FREE  Turns on deferred freeing of objects in the
  leak-finding mode letting the collector to detect alter-object-after-free
  errors as well as detect leaked objects sooner (instead of only when program
  terminates).  Has no effect if SHORT_DBG_HDRS.

GC_ABORT_ON_LEAK        Causes the application to be terminated once leaked or
  smashed (corrupted on use-after-free) objects are found (after printing the
  information about that objects).

SUNOS5SIGS      Solaris-like signal handling.  This is probably misnamed,
  since it really doesn't guarantee much more than POSIX.  Currently set only
  for Solaris2.X, HPUX, and DRSNX.  Should probably be set for some other
  platforms.

PCR     Set if the collector is being built as part of the Xerox Portable
  Common Runtime.

IMPORTANT: Any of the _THREADS options must normally also be defined in
  the client before including gc.h.  This redefines thread primitives to
  invoke the GC_ versions instead.  Alternatively, linker-based symbol
  interception can be used on a few platforms.

GC_THREADS      Should set the appropriate one of the below macros,
  except GC_WIN32_PTHREADS, which must be set explicitly.  Tested by gc.h.

GC_SOLARIS_THREADS      Enables support for Solaris pthreads.
  Must also define _REENTRANT.  Deprecated, use GC_THREADS instead.

GC_IRIX_THREADS         Enables support for Irix pthreads.  See README.sgi.
  Deprecated, use GC_THREADS instead.

GC_HPUX_THREADS         Enables support for HP/UX 11 pthreads.
  Also requires _REENTRANT or _POSIX_C_SOURCE=199506L. See README.hp.
  Deprecated, use GC_THREADS instead.

GC_LINUX_THREADS        Enables support for Xavier Leroy's Linux threads
  or NPTL threads.  See README.linux.  _REENTRANT may also be required.
  Deprecated, use GC_THREADS instead.

GC_OSF1_THREADS         Enables support for Tru64 pthreads.  Deprecated, use
  GC_THREADS instead.

GC_FREEBSD_THREADS      Enables support for FreeBSD pthreads.  Appeared to run
  into some underlying thread problems.  Deprecated, use GC_THREADS instead.

GC_NETBSD_THREADS       Enables support for NetBSD pthreads.  Deprecated, use
  GC_THREADS instead.

GC_OPENBSD_THREADS      Enables support for OpenBSD pthreads.  Deprecated,
  use GC_THREADS instead.

GC_DARWIN_THREADS       Enables support for Mac OS X pthreads.  Deprecated,
  use GC_THREADS instead.

GC_AIX_THREADS  Enables support for IBM AIX threads.  Deprecated, use
  GC_THREADS instead.

GC_DGUX386_THREADS      Enables support for DB/UX on I386 threads.
  See README.DGUX386.  (Probably has not been tested recently.)  Deprecated,
  use GC_THREADS instead.

GC_WIN32_THREADS        Enables support for Win32 threads.  That makes sense
  for Makefile (and Makefile.direct) only under Cygwin or MinGW.  Deprecated,
  use GC_THREADS instead.

GC_WIN32_PTHREADS       Enables support for pthreads-win32 (or other
  non-Cygwin pthreads library for Windows).  This cannot be enabled
  automatically by GC_THREADS, which would assume Win32 native threads.

PTW32_STATIC_LIB        Causes the static version of the Mingw pthreads
  library to be used.  Requires GC_WIN32_PTHREADS.

GC_PTHREADS_PARAMARK    Causes pthread-based parallel mark implementation
  to be used even if GC_WIN32_PTHREADS is undefined.  (Useful for WinCE.)

ALL_INTERIOR_POINTERS   Allows all pointers to the interior of objects to be
  recognized.  (See gc_priv.h for consequences.)  Alternatively,
  GC_all_interior_pointers can be set at process initialization time.

SMALL_CONFIG    Tries to tune the collector for small heap sizes,
  usually causing it to use less space in such situations.  Incremental
  collection no longer works in this case.  Also, removes some
  statistic-printing code.  Turns off some optimization algorithms (like data
  prefetching in the mark routine).

NO_CLOCK        Do not use system clock.  Disables some statistic printing.

GC_DISABLE_INCREMENTAL  Turn off the incremental collection support.

NO_INCREMENTAL  Causes the gctest program to not invoke the incremental
  collector.  This has no impact on the generated library, only on the test
  program.  (This is often useful for debugging failures unrelated to
  incremental GC.)

LARGE_CONFIG    Tunes the collector for unusually large heaps.
  Necessary for heaps larger than about 4 GiB on most (64-bit) machines.
  Recommended for heaps larger than about 500 MiB.  Not recommended for
  embedded systems.  Could be used in conjunction with SMALL_CONFIG to
  generate smaller code (by disabling incremental collection support,
  statistic printing and some optimization algorithms).

DONT_ADD_BYTE_AT_END    Meaningful only with ALL_INTERIOR_POINTERS or
  GC_all_interior_pointers = 1.  Normally ALL_INTERIOR_POINTERS
  causes all objects to be padded so that pointers just past the end of
  an object can be recognized.  This can be expensive.  (The padding
  is normally more than one byte due to alignment constraints.)
  DONT_ADD_BYTE_AT_END disables the padding.

NO_EXECUTE_PERMISSION   May cause some or all of the heap to not
  have execute permission, i.e. it may be impossible to execute
  code from the heap.  Currently this only affects the incremental
  collector on UNIX machines.  It may greatly improve its performance,
  since this may avoid some expensive cache synchronization.  Alternatively,
  GC_set_pages_executable can be called at the process initialization time.

GC_NO_OPERATOR_NEW_ARRAY        Declares that the C++ compiler does not
  support the  new syntax "operator new[]" for allocating and deleting arrays.
  See gc_cpp.h for details.  No effect on the C part of the collector.
  This is defined implicitly in a few environments.  Must also be defined
  by clients that use gc_cpp.h.

REDIRECT_MALLOC=<X>     Causes malloc to be defined as alias for X.
  Unless the following macros are defined, realloc is also redirected
  to GC_realloc, and free is redirected to GC_free.
  Calloc and str[n]dup are redefined in terms of the new malloc.  X should
  be either GC_malloc or GC_malloc_uncollectable, or
  GC_debug_malloc_replacement.  (The latter invokes GC_debug_malloc
  with dummy source location information, but still results in
  properly remembered call stacks on Linux/X86 and Solaris/SPARC.
  It requires that the following two macros also be used.)
  The former is occasionally useful for working around leaks in code
  you don't want to (or can't) look at.  It may not work for
  existing code, but it often does.  Neither works on all platforms,
  since some ports use malloc or calloc to obtain system memory.
  (Probably works for UNIX, and Win32.)  If you build with DBG_HDRS_ALL,
  you should only use GC_debug_malloc_replacement as a malloc
  replacement.

REDIRECT_REALLOC=<X>    Causes GC_realloc to be redirected to X.
  The canonical use is REDIRECT_REALLOC=GC_debug_realloc_replacement,
  together with REDIRECT_MALLOC=GC_debug_malloc_replacement to
  generate leak reports with call stacks for both malloc and realloc.
  This also requires REDIRECT_FREE.

REDIRECT_FREE=<X>       Causes free to be redirected to X.  The canonical use
  is REDIRECT_FREE=GC_debug_free.

IGNORE_FREE     Turns calls to free into a no-op.  Only useful with
  REDIRECT_MALLOC.

NO_DEBUGGING    Removes GC_dump and the debugging routines it calls.
  Reduces code size slightly at the expense of debuggability.

GC_DUMP_REGULARLY       Generate regular debugging dumps.

DEBUG_THREADS   Turn on printing additional thread-support debugging
  information.

GC_COLLECT_AT_MALLOC=<n>        Force garbage collection at every
  GC_malloc_* call with the size greater than the specified value.
  (Might be useful for application debugging or in find-leak mode.)

JAVA_FINALIZATION       Makes it somewhat safer to finalize objects out of
  order by specifying a nonstandard finalization mark procedure  (see
  finalize.c).  Objects reachable from finalizable objects will be marked
  in a separate post-pass, and hence their memory won't be reclaimed.
  Not recommended unless you are implementing a language that specifies
  these semantics.  Since 5.0, determines only the initial value
  of GC_java_finalization variable.

FINALIZE_ON_DEMAND      Causes finalizers to be run only in response
  to explicit GC_invoke_finalizers() calls.
  In 5.0 this became runtime adjustable, and this only determines the
  initial value of GC_finalize_on_demand.

GC_NO_FINALIZATION      Exclude finalization support (for smaller code size).

GC_TOGGLE_REFS_NOT_NEEDED       Exclude toggle-refs support.

GC_ATOMIC_UNCOLLECTABLE Includes code for GC_malloc_atomic_uncollectable.
  This is useful if either the vendor malloc implementation is poor,
  or if REDIRECT_MALLOC is used.

MARK_BIT_PER_GRANULE    Requests that a mark bit (or often byte)
  be allocated for each allocation granule, as opposed to each object.
  This often improves speed, possibly at some cost in space and/or
  cache footprint.  Normally it is best to let this decision be
  made automatically depending on platform.

MARK_BIT_PER_OBJ        Requests that a mark bit be allocated for each
  object instead of allocation granule.  The opposite of
  MARK_BIT_PER_GRANULE.

HBLKSIZE=<ddd>  Explicitly sets the heap block size (where ddd is a power of
  2 between 512 and 16384).  Each heap block is devoted to a single size and
  kind of object.  For the incremental collector it makes sense to match
  the most likely page size.  Otherwise large values result in more
  fragmentation, but generally better performance for large heaps.

USE_MMAP        Use MMAP instead of sbrk to get new memory.
  Works for Linux, FreeBSD, Cygwin, Solaris and Irix.

USE_MUNMAP      Causes memory to be returned to the OS under the right
  circumstances.  This currently disables VM-based incremental collection
  (except for Win32 with GetWriteWatch() available).
  Works under some Unix, Linux and Windows versions.
  Requires USE_MMAP except for Windows.

USE_WINALLOC (Cygwin only)   Use Win32 VirtualAlloc (instead of sbrk or mmap)
  to get new memory.  Useful if memory unmapping (USE_MUNMAP) is enabled.

MUNMAP_THRESHOLD=<value>        Set the desired memory blocks unmapping
  threshold (the number of sequential garbage collections for which
  a candidate block for unmapping should remain free).

GC_FORCE_UNMAP_ON_GCOLLECT      Set "unmap as much as possible on explicit GC"
  mode on by default.  The mode could be changed at run-time.  Has no effect
  unless unmapping is turned on.  Has no effect on implicitly-initiated
  garbage collections.

PRINT_BLACK_LIST        Whenever a black list entry is added, i.e. whenever
  the garbage collector detects a value that looks almost, but not quite,
  like a pointer, print both the address containing the value, and the
  value of the near-bogus-pointer.  Can be used to identify regions of
  memory that are likely to contribute misidentified pointers.

KEEP_BACK_PTRS  Add code to save back pointers in debugging headers
  for objects allocated with the debugging allocator.  If all objects
  through GC_MALLOC with GC_DEBUG defined, this allows the client
  to determine how particular or randomly chosen objects are reachable
  for debugging/profiling purposes.  The gc_backptr.h interface is
  implemented only if this is defined.

GC_ASSERTIONS   Enable some internal GC assertion checking.  Currently
  this facility is only used in a few places.  It is intended primarily
  for debugging of the garbage collector itself, but could also...

DBG_HDRS_ALL    Make sure that all objects have debug headers.  Increases
  the reliability (from 99.9999% to 100% mod. bugs) of some of the debugging
  code (especially KEEP_BACK_PTRS).  Makes SHORT_DBG_HDRS possible.
  Assumes that all client allocation is done through debugging allocators.

SHORT_DBG_HDRS  Assume that all objects have debug headers.  Shorten
  the headers to minimize object size, at the expense of checking for
  writes past the end of an object.  This is intended for environments
  in which most client code is written in a "safe" language, such as
  Scheme or Java.  Assumes that all client allocation is done using
  the GC_debug_ functions, or through the macros that expand to these,
  or by redirecting malloc to GC_debug_malloc_replacement.
  (Also eliminates the field for the requested object size.)
  Occasionally could be useful for debugging of client code.  Slows down the
  collector somewhat, but not drastically.

SAVE_CALL_COUNT=<n>     Set the number of call frames saved with objects
  allocated through the debugging interface.  Affects the amount of
  information generated in leak reports.  Only matters on platforms
  on which we can quickly generate call stacks, currently Linux/(X86 & SPARC)
  and Solaris/SPARC and platforms that provide execinfo.h.
  Default is zero.  On X86, client
  code should NOT be compiled with -fomit-frame-pointer.

SAVE_CALL_NARGS=<n>     Set the number of functions arguments to be saved
  with each call frame.  Default is zero.  Ignored if we don't know how to
  retrieve arguments on the platform.

CHECKSUMS       Reports on erroneously clear dirty bits (at a substantial
  performance cost).  Use only for debugging of the incremental collector.
  Not compatible with USE_MUNMAP or threads.

GC_GCJ_SUPPORT  Includes support for gcj (and possibly other systems
  that include a pointer to a type descriptor in each allocated object).

USE_I686_PREFETCH       Causes the collector to issue Pentium III style
  prefetch instructions.  No effect except on X86 Linux platforms.
  Assumes a very recent gcc-compatible compiler and assembler.
  (Gas prefetcht0 support was added around May 1999.)
  Empirically the code appears to still run correctly on Pentium II
  processors, though with no performance benefit.  May not run on other
  X86 processors?  In some cases this improves performance by
  15% or so.

USE_3DNOW_PREFETCH      Causes the collector to issue AMD 3DNow style
  prefetch instructions.  Same restrictions as USE_I686_PREFETCH.
  Minimally tested.  Didn't appear to be an obvious win on a K6-2/500.

USE_PPC_PREFETCH        Causes the collector to issue PowerPC style
  prefetch instructions.  No effect except on PowerPC OS X platforms.
  Performance impact untested.

GC_USE_LD_WRAP  In combination with the old flags listed in README.linux
  causes the collector some system and pthread calls in a more transparent
  fashion than the usual macro-based approach.  Requires GNU ld, and
  currently probably works only with Linux.

GC_USE_DLOPEN_WRAP      Causes the collector to redefine malloc and
  intercepted pthread routines with their real names, and causes it to use
  dlopen and dlsym to refer to the original versions.  This makes it possible
  to build an LD_PRELOADable malloc replacement library.

THREAD_LOCAL_ALLOC      Defines GC_malloc(), GC_malloc_atomic() and
  GC_gcj_malloc() to use a per-thread set of free-lists. These then allocate
  in a way that usually does not involve acquisition of a global lock.
  Recommended for multiprocessors.  Requires explicit GC_INIT() call, unless
  REDIRECT_MALLOC is defined and GC_malloc is used first.

USE_COMPILER_TLS        Causes thread local allocation to use
  the compiler-supported "__thread" thread-local variables.  This is the
  default in HP/UX.  It may help performance on recent Linux installations.
  (It failed for me on RedHat 8, but appears to work on RedHat 9.)

GC_ATTR_TLS_FAST        Use specific attributes for GC_thread_key like
  __attribute__((tls_model("local-exec"))).

PARALLEL_MARK   Allows the marker to run in multiple threads.  Recommended
  for multiprocessors.

GC_BUILTIN_ATOMIC       Use C11 (GCC) atomic intrinsics instead of
  libatomic_ops primitives.

GC_ALWAYS_MULTITHREADED     Force multi-threaded mode at GC initialization.
  (Turns GC_allow_register_threads into a no-op routine.)

GC_ENABLE_SUSPEND_THREAD (Linux only)   Turn on thread suspend/resume API
support.

GC_WINMAIN_REDIRECT (Win32 only)        Redirect (rename) an application
  WinMain to GC_WinMain; implement the "real" WinMain which starts a new
  thread to call GC_WinMain after initializing the GC.  Useful for WinCE.
  Incompatible with GC_DLL.

GC_REGISTER_MEM_PRIVATE (Win32 only)    Force to register MEM_PRIVATE R/W
  sections as data roots.  Might be needed for some WinCE 6.0+ custom builds.
  (May result in numerous "Data Abort" messages logged to WinCE debugging
  console.)  Incompatible with GCC toolchains for WinCE.

NO_GETENV       Prevents the collector from looking at environment variables.
  These may otherwise alter its configuration, or turn off GC altogether.
  I don't know of a reason to disable this, except possibly if the resulting
  process runs as a privileged user.  (This is on by default for WinCE.)

EMPTY_GETENV_RESULTS    Define to workaround a reputed Wine bug in getenv
  (getenv() may return an empty string instead of NULL for a missing entry).

GC_READ_ENV_FILE (Win32 only)   Read environment variables from the GC "env"
  file (named as the program name plus ".gc.env" extension).  Useful for WinCE
  targets (which have no getenv()).  In the file, every variable is specified
  in a separate line and the format is as "<name>=<value>" (without spaces).
  A comment line may start with any character except for the Latin letters,
  the digits and the underscore ('_').  The file encoding is Latin-1.

USE_GLOBAL_ALLOC (Win32 only)   Use GlobalAlloc() instead of VirtualAlloc()
  to allocate the heap.  May be needed to work around a Windows NT/2000 issue.
  Incompatible with USE_MUNMAP.  See README.win32 for details.

MAKE_BACK_GRAPH         Enable GC_PRINT_BACK_HEIGHT environment variable.
  See README.environment for details.  Experimental.  Limited platform
  support.  Implies DBG_HDRS_ALL.  All allocation should be done using
  the debug interface.

GC_PRINT_BACK_HEIGHT    Permanently turn on back-height printing mode
  (useful when NO_GETENV).  See the similar environment variable description
  in README.environment.  Requires MAKE_BACK_GRAPH defined.

HANDLE_FORK (Unix and Cygwin only)      Attempt by default to make GC_malloc()
  work in a child process fork()'ed from a multi-threaded parent.  Not fully
  POSIX-compliant and could be disabled at runtime (before GC_INIT).

TEST_WITH_SYSTEM_MALLOC         Causes gctest to allocate (and leak) large
  chunks of memory with the standard system malloc.  This will cause the root
  set and collected heap to grow significantly if malloc'ed memory is somehow
  getting traced by the collector.  This has no impact on the generated
  library; it only affects the test.

POINTER_MASK=<0x...>    Causes candidate pointers to be AND'ed with the given
  mask before being considered.  If either this or the following macro is
  defined, it will be assumed that all pointers stored in the heap need to be
  processed this way.  Stack and register pointers will be considered both
  with and without processing.  These macros are normally needed only to
  support systems that use high-order pointer tags.  EXPERIMENTAL.

POINTER_SHIFT=<n>       Causes the collector to left shift candidate pointers
  by the indicated amount before trying to interpret them.  Applied after
  POINTER_MASK. EXPERIMENTAL.  See also the preceding macro.

ENABLE_TRACE    Enables the GC_TRACE=addr environment setting to do its job.
  By default this is not supported in order to keep the marker as fast as
  possible.

DARWIN_DONT_PARSE_STACK         Causes the Darwin port to discover thread
  stack bounds in the same way as other pthread ports, without trying to
  walk the frames on the stack.  This is recommended only as a fall-back for
  applications that don't support proper stack unwinding.

GC_NO_THREADS_DISCOVERY (Darwin and Win32+DLL only)     Exclude DllMain-based
  (on Windows) and task-threads-based (on Darwin) thread registration support.

GC_INSIDE_DLL (Win32 only)      Enable DllMain-based approach of threads
  registering even in case GC_DLL is not defined.

GC_DISCOVER_TASK_THREADS (Darwin and Win32+DLL only)    Compile the collector
  with the implicitly turned on task-threads-based (on Darwin) or
  DllMain-based (on Windows) approach of threads registering.  Only for
  compatibility and for the case when it is not possible to call
  GC_use_threads_discovery() early (before other GC calls).

USE_PROC_FOR_LIBRARIES  Causes the Linux collector to treat writable
  memory mappings (as reported by /proc) as roots, if it doesn't have
  other information about them.  It no longer traverses dynamic loader
  data structures to find dynamic library static data.  This may be
  required for applications that store pointers in mmapped segments without
  informing the collector.  But it typically performs poorly, especially
  since it will scan inactive but cached NPTL thread stacks completely.

IGNORE_DYNAMIC_LOADING  Don't define DYNAMIC_LOADING even if supported by the
  platform (that is, build the collector with disabled tracing of dynamic
  library data roots).

NO_PROC_STAT    Causes the collector to avoid relying on Linux
  "/proc/self/stat".

NO_GETCONTEXT   Causes the collector to not assume the existence of the
  getcontext() function on linux-like platforms.  This currently happens
  implicitly on Darwin, Hurd, or ARM or MIPS hardware.  It is explicitly
  needed for some old versions of FreeBSD.

STATIC=static   Causes various GC_ symbols that could logically be declared
  static to be declared (this is the default if NO_DEBUGGING is specified).
  Reduces the number of visible symbols (letting the optimizer do its work
  better), which is probably cleaner, but may make some kinds of debugging
  and profiling harder.

GC_DLL  Build dynamic-link library (or dynamic shared object).  For Unix this
  causes the exported symbols to have 'default' visibility (ignored unless
  GCC v4+) and the internal ones to have 'hidden' visibility.

DONT_USE_USER32_DLL (Win32 only)        Don't use "user32" DLL import library
  (containing MessageBox() entry); useful for a static GC library.

GC_PREFER_MPROTECT_VDB  Choose MPROTECT_VDB manually in case of multiple
  virtual dirty bit strategies are implemented (at present useful on Win32 and
  Solaris to force MPROTECT_VDB strategy instead of the default GWW_VDB or
  PROC_VDB ones).

GC_IGNORE_GCJ_INFO      Disable GCJ-style type information (useful for
  debugging on WinCE).

GC_PRINT_VERBOSE_STATS  Permanently turn on verbose logging (useful for
  debugging and profiling on WinCE).

GC_ONLY_LOG_TO_FILE     Don't redirect GC stdout and stderr to the log file
  specified by GC_LOG_FILE environment variable.  Has effect only when the
  variable is set (to anything other than "0").

GC_ANDROID_LOG (Android only)   Output error/debug information to Android log.

GC_DONT_EXPAND  Don't expand the heap unless explicitly requested or forced to.

GC_USE_ENTIRE_HEAP      Causes the non-incremental collector to use the
  entire heap before collecting.  This sometimes results in more large block
  fragmentation, since very large blocks will tend to get broken up during
  each GC cycle.  It is likely to result in a larger working set, but lower
  collection frequencies, and hence fewer instructions executed in the
  collector.  This macro controls only the default GC_use_entire_heap value.

GC_INITIAL_HEAP_SIZE=<value>    Set the desired default initial heap size
  in bytes.

GC_FREE_SPACE_DIVISOR=<value>   Set alternate default GC_free_space_divisor
  value.

GC_TIME_LIMIT=<milliseconds>    Set alternate default GC_time_limit value
  (setting this to GC_TIME_UNLIMITED will essentially disable incremental
  collection while leaving generational collection enabled).

GC_FULL_FREQ=<value>    Set alternate default number of partial collections
  between full collections (matters only if incremental collection is on).

NO_CANCEL_SAFE (Posix platforms with threads only)      Don't bother trying
  to make the collector safe for thread cancellation; cancellation is not
  used.  (Note that if cancellation is used anyway, threads may end up
  getting canceled in unexpected places.)  Even without this option,
  PTHREAD_CANCEL_ASYNCHRONOUS is never safe with the collector.  (We could
  argue about its safety without the collector.)

UNICODE (Win32 only)    Use the Unicode variant ('W') of the Win32 API instead
  of ANSI/ASCII one ('A').  Useful for WinCE.

HOST_ANDROID (or __ANDROID__)   Compile for Android NDK platform.

SN_TARGET_PS3           Compile for Sony PS/3.

USE_GET_STACKBASE_FOR_MAIN (Linux only)  Use pthread_attr_getstack() instead
  of __libc_stack_end (or instead of any hard-coded value) for getting the
  primordial thread stack base (useful if the client modifies the program's
  address space).