* Upgrade trunk (#7763)
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
* Fix device-install.bat baud rate
As reported by @gruberaaron , work to improve the 1200bps reset for
esptool caused all runs of device-install.bat to use 1200bps as
the baud rate.
This change removes the general SET "ESPTOOL_BAUD=1200" that was causing
the issues and places the baud settings for reset mode inside the conditional.
Fixes https://github.com/meshtastic/firmware/issues/7172
---------
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
The previous method of removing `--change-mode` from the argument list used a
string (`NEW_ARGS`) and `eval set -- $NEW_ARGS` to reconstruct the positional
parameters. This was both unsafe and incorrect.
Because `NEW_ARGS` was built using quoted literal `$arg` strings instead of the
actual values, it resulted in all filtered arguments being set to the same last
value of `$arg`. This caused `getopts` to receive incorrect input and silently
fail to parse options like `-p` and `-f`, leading to broken behavior and unset
variables (e.g., `ESPTOOL_CMD` never got a port).
This patch rewrites the logic to use an array (`NEW_ARGS+=("$arg")`), and
resets positional parameters via `set -- "${NEW_ARGS[@]}"`. This preserves
argument integrity and avoids the unsafe use of `eval`.
Example of the broken behavior before this fix:
./device-update.sh -p /dev/ttyACM0 -f firmware.bin
Resulted in:
set -- firmware.bin firmware.bin firmware.bin firmware.bin
Now:
set -- -p /dev/ttyACM0 -f firmware.bin
as expected.
Signed-off-by: Neil Hanlon <neil@shrug.pw>
* Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28
* Merge PR #420
* Fixed double and missing Default class.
* Use correct format specifier and fixed typo.
* Removed duplicate code.
* Fix error: #if with no expression
* Fix warning: extra tokens at end of #endif directive.
* Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board.
* Fix deprecated macros.
* Set RP2040 in dormant mode when deep sleep is triggered.
* Fix array out of bounds read.
* Admin key count needs to be set otherwise the key will be zero loaded after reset.
* Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible.
* Remove log spam when reading INA voltage sensor.
* Remove static declaration for admin keys from userPrefs.h. Load hard coded admin keys in case config file has empty slots.
* Removed newlines from log.
* Fix issue #5665.
* Fix build for Pico2 RP2350 platform.
* Enable Wifi client on Pico2W.
* Use correct processor on Pico2.
* Fix deprecated warning.
* Update platform and framework for RP2350.
* Added Pico2W variant including Wifi support.
* Fix typo in used variant.
* Remove obsolete define.
* Fix for native Linux build.
* Simplify RP2350 platform tag reference.
Co-authored-by: Austin <vidplace7@gmail.com>
* Cast user prefs strings.
* Update to last successfully building platform package.
* Define I2C GPIOs to ensure usage of both ports. Possibly fixes#5361
* RAK11310 support for RAK12002 RTC added.
* Update platform and framework packages to 4.4.3.
* Use RP2040 base platform and framework package. Use RAK11300 board definition in arduino-pico framework.
* Use RAK11300 board definition in arduino-pico framework.
* Fix build when MESHTASTIC_EXCLUDE_GPS is defined.
* Added configuration for Waveshare Pico LoRa module in combination with Orange Pi Zero3.
* Equal to upstream master.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Tom Fifield
github-actions[bot]
thebentern
Jonathan Bennett
mikecarper
Austin
Thomas Göttgens
Neil Hanlon
Mictronics
Ing. Jan Kaláb
Matt Smith