UIFlow Desktop IDE deployment{docsify-ignore-all}

Install UIFlow-Desktop-IDE
configuration
Example
Additional features

Insrall UIFlow-Desktop-IDE

Click UIFlow-Desktop-IDE for your operating system below to download.

UIFlow Desktop IDE:

Windows MacOS Linux

configuration

Unzip the downloaded UIFlow Desktop IDE archive and double-click to execute the application..

?>After the software is started, it will automatically detect whether your computer has a USB driver (CP210X) installed, click Install, and follow the prompts to install it.

After the driver installation is complete, it will automatically enter the UIFlow Desktop IDE and automatically pop up the configuration box. At this time, connect the M5 device to the computer through the Tpye-C data cable.

?>Using the UIFlow Desktop IDE requires the M5 device to carry the UIFlow firmware and enter the USB mode.

Click the power button on the left side of the device to restart. After entering the menu, select Setup quickly to enter the configuration page and selectUSB mode.

Select the corresponding port, and connect to the programming device, click OK.

Example

After the connection is completed, you can start programming. Drag and drop the block in the block list on the left to the programming area. After editing the program, click the Run button in the upper right corner to execute the program..

Additional features

?>In addition to being a powerful program editor, UIFlow Desktop IDE also integrates USB driver installation, M5Burner burning tool and other functions, no need to download other software, one-stop solution programming environment Deployment requirements.

In the upper menu bar of the IDE, you can find the corresponding additional functions, click to open the use, about the use of M5Burner, please refer to our other document for details. "Upgrade Firmware".

3.4 KiB Raw Permalink Blame History