3.6 KiB
Module DC MOTOR
SKU:M021
Description
DC MOTOR is built with MEGA328 and L293DD microcontrollers, implemented 4 driver channels. A DC power input is designed for power supplement. Through M-BUS the DC in can automatically power the M5 core at top. DC motor module can drive RJ12 interface encoder-motor easily and quickly, such as LEGO ev3 Motor.（This product is not affiliated with or endorsed by LEGO. LEGO is a trademark of the LEGO Group of companies）
Series Communication: I2C (0x56).
Product Features
- DC Power input: 6-12V
- DC Connector Type: XT30 (female)
- 4x Motor port
- Compatible with LEGO EV3 motor
- 2x I2C GROVE port (extend PORTA from M5 Core)
- L293DD: PUSH-PULL Driver Chip
Include
- 1x DC MOTOR module
- 1x 10cm motor cable
- 1x DC connector
Specification
| Resources | Parameter |
| Net weight | 17g |
| Gross weight | 48g |
| Product Size | 54*54*12mm |
| Package Size | 95*65*25mm |
Related Link
EasyLoader
1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed.
2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click "Burn" to start burning.
3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. Click here to view the driver installation tutorial
PinMap
Mega328 ISP Download interface Pin foot definition
MBUS PinMap
Example
1. Arduino
To get the complete Arduino code, please click here
2. UIFlow
To get the complete code, please click here
Schematic
NOTE
If you want to change the firmware inside MEGA328 chip which has implemented the motor driver code by default, you can overwrite through ISP port. Below shows the location of ISP port.
Last updated: 2020-12-28
<script> var purchase_link = 'https://m5stack.com/collections/m5-module/products/lego-module'; anchor_search(purchase_link); scrollFunc(); </script>