3.6 KiB
COM.LoRaWAN915
SKU:M031-C3
Description
COM.LoRaWAN915 is a LoRaWAN communication module suitable for 915MHz frequency launched by M5Stack. The module adopts the ASR6501 solution, which supports long-distance communication and has both ultra-low power consumption and high sensitivity. The module integrates the LoRaWAN protocol stack and adopts a serial communication interface (using AT command set for control), and can be used as a collection node to access a large number of gateways for data collection and management.
An external power supply is provided (5V-12V input can be adjusted by switching the dial on-board switches). The module fits for long distance low power IoT communication applications, such as deployment of environmental monitoring nodes.
Product Features
- ASR6501
- Operating frequency: 915MHz
- SMA antenna
- Communication interface: UART
- Command protocol: AT command
Includes
- 1x LoRaWAN915 Module
- 1x SMA antenna
Application
- Automatic remote meter reading
- Intelligent traffic intelligent parking lot
- Remote irrigation and environmental monitoring
Major countries and regions supported by AU915
Argentina/Australia/Bolivia/Brazil/Canada/Chile/Colombia/Dominican Republic/Ecuador/Greece Guatemala/Honduras/Jamaica/Mexico/New-Zealand/Nicaragua/Panama/Paraguay/Peru/Papua New Guinea/Salvador/United States/Uruguay
Specification
| Specifications | Parameters |
| UART baud rate | 115200 |
| Net weight | 35g |
| Gross weight | 72g |
| Product size | 54.2*54.2*13.2mm |
| Package size | 165*60*36mm |
Pin mapping
| CORE | RX | TX |
| SW DIP-6 dip switch | G17/G0/G13 | G16/G5/G15 |
?>M5Stack FIRE GPIO 16/17 is connected to PSRAM by default. If the TXD/RXD of this module uses GPIO16, GPIO17 will conflict with it. Therefore, when using M5Stack FIRE to drive the module, you need to switch the DIP switch to any one of the remaining two sets of pins.
Related Links
Schematic
- The module plugs into the base
