11 KiB
M5StickC
SKU:K016-C
Tutorial&Quick-Start
Choose the development platform you want to use, view the corresponding tutorial&quick-Start.
Description
M5StickC is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board. What it can do? This tiny block is able to realize your idea, enlighten your creativity, and help with your IoT prototying in a very short time. It will take away a lot of pains from the development process.M5stickC is one of the core devices in M5Stack product series.
It is built in a continually growing hardware and software ecosystem. It has a lot of compatible modules and units, as well as the open source code & engineering communities that will help you maximize your benefits in every step of the developing process.
Power switch operation：
-
Power on ：Press power button for 2 seconds
-
Power off ：Press power button for 6 seconds
Notice:
- Baud rate supported by M5StickC: 1200 ~115200, 250K, 500K, 750K, 1500K
Product Features
- ESP32-based
- Built-in 6-Axis IMU
- Red LED
- IR transmitter
- Microphone
- Buttons, LCD(0.96 inch)
- Built-in Lipo Battery
- Extendable Socket
- Wearable & Wall mounted
- Development Platform UIFlow, MicroPython, Arduino
Include
- 1x M5StickC
- 1x USB Type-C(20cm)
Applications
- Internet of things terminal controller
- Wearable devices
- Stem education product
- DIY creation
USB Drive problems
UnitV/M5StickV/M5StickC/ATOM may not work without driver in some systems. Users can manually install FTDI driver to fix this problem.
Specification
| Resources | Parameter |
| ESP32 | 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth |
| Flash Memory | 4MB |
| Power Input | 5V @ 500mA |
| Port | TypeC x 1, GROVE(I2C+I/0+UART) x 1 |
| LCD screen | 0.96 inch, 80*160 Colorful TFT LCD, ST7735S |
| Button | Custom button x 2 |
| LED | RED LED |
| MEMS | MPU6886 |
| IR | Infrared transmission |
| MIC | SPM1423 |
| RTC | BM8563 |
| PMU | AXP192 |
| Battery | 95 mAh @ 3.7V |
| Antenna | 2.4G 3D Antenna |
| PIN port | G0, G26, G36 |
| Operating Temperature | 32°F to 104°F ( 0°C to 40°C ) |
| Net weight | 15.1g |
| Gross weight | 33g |
| Product Size | 48.2*25.5*13.7mm |
| Package Size | 55*55*20mm |
| Case Material | Plastic ( PC ) |
EasyLoader
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. M5Core host Please click here to view the CP210X driver installation tutorial, M5StickC/V/T/ATOM series can be used without driver)
Description:
Accelerometer, microphone, LED, IR, RTC, Bluetooth and other hardware tests. Press A or B to switch test items.
Schematic
PinMap
Power structure block diagram
RED LED & IR Transmitter & BUTTON A & BUTTON B
| ESP32 | GPIO10 | GPIO9 | GPIO37 | GPIO39 |
| RED LED | LED Pin | |||
| IR Transmitter | Transmitter Pin | |||
| BUTTON A | Button Pin | |||
| BUTTON B | Button Pin |
TFT LCD
Driver IC：ST7735S
Resolution：80 * 160
| ESP32 | GPIO15 | GPIO13 | GPIO23 | GPIO18 | GPIO5 |
| TFT LCD | TFT_MOSI | TFT_CLK | TFT_DC | TFT_RST | TFT_CS |
GROVE PORT
| ESP32 | GPIO33 | GPIO32 | 5V | GND |
| GROVE port | SCL | SDA | 5V | GND |
MIC (SPM1423)
| ESP32 | GPIO0 | GPIO34 |
| MICPHONE | SCL | SDA |
6-Axis posture sensor (SH200Q/MPU6886) & power management IC (AXP192)
| ESP32 | GPIO22 | GPIO21 |
| 6-Axis IMU sensor | SCL | SDA |
| power management IC | SCL | SDA |
AXP192
| Microphone | RTC | TFT backlight | TFT IC | ESP32/3.3V MPU6886/SH200Q | 5V GROVE |
| LDOio0 | LDO1 | LDO2 | LDO3 | DC-DC1 | IPSOUT |
Charging current measured value
| charging current | Fully charged current(Power OFF) | Fully charged current(Power ON） |
| 0.488A | 0.066A | 0.181A |
Related Link
-
datasheet
-
API
structural-design-file
Version Change
| Release Date | Product Change | Note： |
|---|---|---|
| 2019.3 | Initial public release | / |
| 2019.8 | SH200Q changed to MPU6886 | / |
| 2019.10 | Upgrade the bottom and add copper nuts | / |
| 2020.3 | Battery capacity changed from 80mAh to 95mAh | / |
Example
Arduino
UIFlow
For a tutorial on uiflow, see here