8.9 KiB
M5Stick
SKU:K016
Description
M5Stickis a mini M5Stack with both WiFi accessible and IMU sensor, which is powered by ESP32. It is a portable, easy-to-use, open source, IoT development board. What it can do? This tiny block is able to realize your idea, enlighten your creativity, and help with your IoT prototying in a very short time. It will take away a lot of pains from the development process. M5stick is one of the core devices in M5Stack product series which is built in a continuing growing hardware & software ecosystem. It has a lot of compatible modules & units, as well as the open source code & engineering community that will help you maximize your benefits in every step of the developing process.
The following figure shows the position indication of Button A and Assembly hole
Power on / off:
-
Power on: Click the reset button
-
Shutdown: Double the reset button
Product Features
- ESP32-based
- Bulit-in 9-Axis IMU
- Blue LED
- Buzzer
- IR transmitter
- Buttons, OLED(1.3 inch)
- Lipo Battery
- Extendable Socket
- Wearable & Wall mounted
- Development Platform UIFlow, MicroPython, Arduino
Include
- 1x M5Stick
- 1x USB Type-C(20cm)
Applications
- Wearable devices
- Internet of things terminal controller
- DIY creation
Specification
| Resources | Parameter |
| ESP32 | 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth |
| Flash Memory | 4MB |
| Power Input | 5V @ 500mA |
| Port | TypeC x 1, GROVE(I2C+I/0+UART) x 1 |
| OLED Screen | 1.3 inch, 64 x 128, SH1107 |
| Button | Custom button x 1 |
| LED | Blue LED x 1 |
| Buzzer | Piezo buzzer |
| MEMS | MPU9250(Gray version) |
| IR | Infrared transmission |
| Battery | 80 mAh @ 3.7V |
| Antenna | 2.4G 3D Antenna |
| Operating Temperature | 32°F to 104°F ( 0°C to 40°C ) |
| Net weight | 14g |
| Gross weight | 65g |
| Product Size | 48.2*25.5*13.7mm |
| Package Size | 85*55*31mm |
| Case Material | Plastic ( PC ) |
EasyLoader
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. M5Core host Please click here to view the CP210X driver installation tutorial, M5StickC/V/T/ATOM series can be used without driver)
Description:
Screen LED IR buzzer Key test, click button A screen will print and display helloworld.
PinMap
Peripheral Pin Mapping
blue LED & BUTTON & BUZZER & IR Transmitter
| ESP32 | GPIO17 | GPIO19 | GPIO26 | GPIO35 |
| IR Transmitter | Pin | |||
| Blue LED | Pin | |||
| BUZZER | Pin | |||
| BUTTON | Pin |
OLED Screen
| ESP32 | GPIO14 | GPIO27 | GPIO33 | GPIO18 | GPIO23 |
| OLED | CS | DC | RST | D0 | D1 |
GROVE Port
| ESP32 | GPIO13 | GPIO25 | 5V | GND |
| GROVE Port | SCL | SDA | 5V | GND |
IP5306 charging/discharging，Voltage parameter
| charging | discharging | ||
| 0.00 ~ 3.40V -> 0% | 4.20 ~ 4.07V -> 100% | ||
| 3.40 ~ 3.61V -> 25% | 4.07 ~ 3.81V -> 75% | ||
| 3.61 ~ 3.88V -> 50% | 3.81 ~ 3.55V -> 50% | ||
| 3.88 ~ 4.12V -> 75% | 3.55 ~ 3.33V -> 25% | ||
| 4.12 ~ / -> 100% | 3.33 ~ 0.00V -> 0% |
Gray version M5Stick:
| ESP32 | GPIO22 | GPIO21 |
| 9-Axis posture sentsor: MPU9250 | SCL | SDA |
Gray type:
- Accessories:
WATCH BELT,WALL/1515andBRICK
Schematic
Related Link
Example
1.ArduinoIDE
2.UIFlow
Video
- m5stick Case - Remote control air conditioner