12 KiB
M5GO Lite
SKU:K022
Tutorial&Quick-Start
Choose the development platform you want to use, view the corresponding tutorial&quick-Start.
Description
M5GO Lite is a light pack of M5GO kit, instead of having 6 M5units, M5GO-Lite provides 1 ENV + accessories and the same M5 controller as M5GO. M5GO-Lite is also designed for STEM education. M5GO controller itself is already a full-feathered, highly integrated, upgraded development board(which) provides plenty of hardware resources, such as LCD screen, speaker, Led bar, 16M flash, microphone and more. Light(Last) but not least.
all M5stack development board can be programmed by using Arduino IDE, WebIDE UIFlow, Micropython and Blockly. It greatly simplifies the development process for those projects which require a joint hardware and software solution. Not only does M5stack have far-reaching IoT applications in industry, agriculture, and home, but it also empowers students to learn to code in STEM classrooms.
Power on/off:
-
Power on: click the red power button on the left
-
Power off: Quickly double-click the red power button on the left
Product Features
- ESP32-based
- Built-in Speaker, Buttons,Color LCD(320*240)
- TF card slot (16G Maximum size)
- Extendable Pins & Holes
- M-Bus Socket & Pins
- Development Platform UIFlow, MicroPython, Arduino
Include
- 1x M5GO
- 1x ENV Unit
- 1x GROVE Cable
- 1x Type-C USB(20cm)
- 1x User Manual
Applications
- Internet of things terminal controller
- Stem education product
- DIY creation
Specification
| Resources | Parameter |
| ESP32 | 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth |
| Flash Memory | 16MB |
| Power Input | 5V @ 500mA |
| Port | TypeC x 1, GROVE(I2C+I/0+UART) x 1 |
| IPS Screen | 2 inch, 320x240 Colorful TFT LCD, ILI9342C, max brightness 853nit |
| Speaker | 1W-0928 |
| MEMS | BMM150 + MPU6886 |
| MIC | Analog mic |
| Button | Custom button x 3 |
| Battery | 500 mAh @ 3.7V |
| Antenna | 2.4G 3D Antenna |
| Operating Temperature | 32°F to 104°F ( 0°C to 40°C ) |
| Net weight | 56.4g |
| Gross weight | 159g |
| Product Size | 54*54*21 mm |
| Package Size | 105*65*40 mm |
| Case Material | Plastic ( PC ) |
M5GO Bottom
Click to view details parameters
EasyLoader
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. M5Core host Please click here to view the CP210X driver installation tutorial, M5StickC/V/T/ATOM series can be used without driver)
Description:
Load UIFlow firmware, built-in demo program supports testing of accelerometer, LED BAR, microphone, buttons and some peripheral sensors. The firmware can be used for UIFlow graphical programming.
PinMap
LCD & TF card
LCD ：320x240 TF card Maximum size 16GB
| ESP32 Chip | GPIO23 | GPIO19 | GPIO18 | GPIO14 | GPIO27 | GPIO33 | GPIO32 | GPIO4 |
| ILI9342C | MOSI/MISO | / | CLK | CS | DC | RST | BL | |
| TF Card | MOSI | MISO | CLK | CS |
Button & Speaker
| ESP32 Chip | GPIO39 | GPIO38 | GPIO37 | GPIO25 |
| Button Pin | BUTTON A | BUTTON B | BUTTON C | |
| Speaker | Speaker Pin |
GROVE Port A & IP5306
We’ve use the customized I2C version of IP5306 in power management. Its I2C address is 0x75. Click here to check its datasheet.
| ESP32 Chip | GPIO22 | GPIO21 | 5V | GND |
| GROVE A | SCL | SDA | 5V | GND |
| IP5306 | SCL | SDA | 5V | GND |
IP5306 charging/discharging，Voltage parameter
| charging | discharging | ||
| 0.00 ~ 3.40V -> 0% | 4.20 ~ 4.07V -> 100% | ||
| 3.40 ~ 3.61V -> 25% | 4.07 ~ 3.81V -> 75% | ||
| 3.61 ~ 3.88V -> 50% | 3.81 ~ 3.55V -> 50% | ||
| 3.88 ~ 4.12V -> 75% | 3.55 ~ 3.33V -> 25% | ||
| 4.12 ~ / -> 100% | 3.33 ~ 0.00V -> 0% |
6-Axis MotionTracking Sensor MPU6886
MPU6886 I2C address 0x68
| ESP32 Chip | GPIO22 | GPIO21 | 5V | GND |
| MPU6886 | SCL | SDA | 5V | GND |
3-Axis Geomagnetic Sensor BMM150
BMM150 I2C address 0x10
| ESP32 Chip | GPIO22 | GPIO21 | 5V | GND |
| BMM150 | SCL | SDA | 5V | GND |
M5GO Base Port
GROVE Port B
| ESP32 Chip | GPIO36 | GPIO26 | 5V | GND |
| GROVE B | GPIO36 | GPIO26 | 5V | GND |
GROVE Port C
| ESP32 Chip | GPIO16 | GPIO17 | 5V | GND |
| GROVE C | RXD | TXD | 5V | GND |
LED Bar & Micphone & Speaker
| ESP32 Chip | GPIO15 | GPIO34 | GPIO25 |
| LED Bar | SIG Pin | ||
| MIC | MIC Pin | ||
| Speaker | Speaker Pin |
M5PORT EXPLAIN
| PORT | PIN | Note: |
|---|---|---|
| PORT-A(Red) | G21/22 | I2C |
| PORT-B(Black) | G26/36 | DAC/ADC |
| PORT-C(Blue) | G16/17 | UART |
ESP32 ADC/DAC
| ADC1 | ADC2 | DAC1 | DAC2 |
|---|---|---|---|
| 8 channels | 10 channels | 2 channels | 2 channels |
| G32-39 | G0/2/4/12-15/25-27 | G25 | G26 |
M-BUS
When using the RGB LED of gpio15, it is recommended to initialize,pinMode(15, OUTPUT_OPEN_DRAIN); For more information about Pin assignment and Pin Remapping, Please refer to ESP32 Datasheet
Related Link
-
Datasheet
-
API
Schematic
Version Change
| Release Date | Product Change | Note: |
|---|---|---|
| 2018.4 | Initial public release | / |
| 2019.6 | MPU9250 changed to MPU6886+BMM150 | / |
| 2019.7 | TN screen changed to IPS screen | before use . pls upgrade your M5Stack lib to the latest version (after 0.2.8) to solve screen reverse color problem. |
| 2019.11 | Battery capacity changed from 600mAh to 500mAh | / |
Example
1. Arduino IDE
M5GO + ENV to get weather data:
But before compiling this program, please install Adafruit BMP280 Library and copy Adafruit_Sensor.h to C:\Users\<user_name>\Documents\Arduino\libraries\Adafruit_BMP280_Library first.
For more infomation, Click here
More examples here
2. UIFlow
For more details, click here
Video
- m5stack instroduce