3.9 KiB
FLIR
SKU:K021
Description
FLIR features the latest FLIR Lepton 3.0 longwave-infrared (LWIR) camera core, get two times the resolution and 4x the pixels of the previous 2.x generation
FLIR is covered by a 3D printing case, makes it a perfect functional bottom for non-contact temperature measurement, compatible with M5Core and can be controlled via I2C protocol.
The effective image generate by the Lepton sensor is 160×120, but you can process the image thru program and display a different resolution.
Note: If it worked for long hours, Lepton will heat up a little. But the output image is not affected.
Product Features
- 160×120 Effective Pixels
- Lepton Low operating power — 150 mW (operating), 650 mW (during shutter event), 5 mW (standby)
- Field of view: 56°, with shutter
- Lepton Input Supply Voltage: 1.2V，2.8V，2.5V - 3.1V IO
- Fast imaging time (< 0.5 second)
Include
- 1x FLIR
Applications
- Car engine failure check
- Building dehumidification insulation sealing test
- Industrial furnace inner wall refractory crack
- Outdoor observation of animals at night
Specification
| Resources | Parameter |
| Net weight | 17g |
| Gross weight | 34g |
| Product Size | 54*54*13mm |
| Package Size | 125*67*23mm |
Lepton Parameter
| Lepton Parameter item | Parameter value |
|---|---|
| Effective Frame Rate | 8.7Hz |
| Input Clock | 25-MHz |
| Pixel Size | 12µm |
| Scene Dynamic Range | Low Gain Mode: -10 to 400°C; High Gain Mode: -10 to 140°C |
| Spectral Range | 8 µm to 14 µm |
| Thermal Sensitivity | ＜50 mK（0.050℃） |
| Input Supply Voltage | 2.8 V, 1.2 V, 2.5 V - 3.1 V IO |
| Optimum Temperature Range | -10 °C to +80 °C |
EasyLoader
1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed.
2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click "Burn" to start burning.
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. Click here to view the driver installation tutorial
Related Link
Example
please click here to download Arduino code
<script>
var purchase_link = 'https://m5stack.com/collections/m5-application/products/flir-radiometric-lepton';
anchor_search(purchase_link);
scrollFunc();
</script>