5.1 KiB
BalaC
SKU:K038
Description
BalaC is a DIY dual wheel balancing car kit. BalaC uses the STM32 series chip, two motor driver ICs, and is also equipped with a rechargable replaceable battery. It incorporates a light-weight design with 360° servos. It's possible to use the UIFlow graphic interface to program the balancing car. An M5StickC is included in the package. The BalaC maintains its balance with the help of mpu6886. The real-time compensation of the servos are controlled by calculating the offset value to achieve the purpose of balancing. A LEGO compatible design allows you to change different tires. If you want to learn about PID or need an interesting programming toy product, BalaC will be a good choice
At present, there is no stock program, you will need to write the PID code by yourself.
Product Features
- Based on ESP32 + STM32
- Personality DIY
- Detachable Design
- Two wheel Drive
- Replaceable battery
- Program Platform：UIFlow, MicroPython, Arduino
Include
- 1x M5StickC
- 1x BalaC Base
- 2x Wheels
- 2x Wheel Connectors
- 2x 9G Servos
- 2x Elastics
- 2x Screws
- 1x Hex key
- 1x 16340 Battery
- 1x 10cm Type-C Cable
Application
- Balancing car
Specification
| Specification | Parameter |
|---|---|
| ESP32-Pico-D4 | 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth |
| Servo | Rotation angle: 360 °; no load speed: 0.12 seconds / 60 degrees (4.8V) |
| Driver | L9110S |
| Slave | STM32F030F4P6 |
| Communication protocol | I2C: 0x38 |
| Battery | 16340, 3.7V, 700mAh, Li-ions rechargeable |
| Net weight | 162g |
| Gross weight | 206g |
| Product Size | 30*100*105mm |
| Package Size | 148*118*42mm |
EasyLoader
EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. M5Core host Please click here to view the CP210X driver installation tutorial, M5StickC/V/T/ATOM series can be used without driver)
Description:
After power on, press the power key for calibration. At this time, the LED flashes and the calibration is successful, and the balance can be maintained automatically
Example
1. Arduino
Click here to download examples
UIFlow
(Not actual code for reference only) Click here to download UIFlow
<script>
var purchase_link = 'https://m5stack.com/collections/all/products/bala-c-esp32-development-mini-self-balancing-car';
anchor_search(purchase_link);
scrollFunc();
</script>