## Description
**RELAY** as it says is an M5Unit that implement a Relay functions. Relay can be used as an electrically operated switch, uses an electromagnet to mechanically operate a switch, where it is necessary to control a large power load circuit by a separate low-power signal such as digital signal output from a microprocessor.
The Relay support input voltage of up to 30V DC and 220V AC.
There are 3 pins named: ON, OFF, COM. You can program to make COM connect to ON or OFF, just by high and low out put of a digital GPIO.
## Product Features
- Single-BUS control
- Up to 3A @ 30 V DC or 220 V AC
- Software Development Platform: Arduino, UIFlow (Blockly, Python)
- Two Lego-compatible holes
## Include
- 1x RELAY Unit
- 1x Grove Cable
- 1x 3.96 soket
## Applications
- Remote control of high-power appliances, such as refrigerators, air conditioners, TVs, etc.
## Specification
Resources
Parameter
Net weight
12g
Gross weight
26g
Product Size
48*24*21mm
Package Size
60*57*17mm
## EasyLoader
>EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. M5Core host [Please click here to view the CP210X driver installation tutorial](en/arduino/arduino_development), M5StickC/V/T/ATOM series can be used without driver)
The relay coil is turned on and off, and the contact is used as a switch for circuit control.
## Schematic
### PinMap
M5Core(GROVE B)
GPIO36
GPIO26
5V
GND
RELAY Unit
RELAY Controlling Pin
5V
GND
## Example
### 1. Arduino
- [Click here to download the Arduino example](https://github.com/m5stack/M5Stack/tree/master/examples/Unit/RELAY)
### 2. UIFlow
- [Click here to download the UIFlow example](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Unit/RELAY/UIFlow)
## Video
**Program with UIFlow**
Last updated: 2020-12-14