mirror of
https://github.com/m5stack/m5-docs.git
synced 2026-05-20 10:23:01 -07:00
Merge branch 'master' of https://github.com/m5stack/m5-docs
This commit is contained in:
vany5921
@@ -11,9 +11,9 @@
|
||||
|
||||
<img src="assets/img/product_pics/module/com.x_gsm/comx_gsm_02.webp" width = "30%">
|
||||
|
||||
!>COM GSM RXD/TXD can be connected to M5Stack's UART (TX(0/13/17)RX(5/15/16)) by setting the DIP switch. Since these GPIO in **M5Stack Fire** 16/17 are connected to PSRAM by default, conflicts may occur when using GSM. It is recommended to use any set of UART pins in the remaining two groups.
|
||||
?>COM GSM RXD/TXD can be connected to M5Stack's UART (TX(0/13/17)RX(5/15/16)) by setting the DIP switch. Since these GPIO in **M5Stack Fire** 16/17 are connected to PSRAM by default, conflicts may occur when using GSM. It is recommended to use any set of UART pins in the remaining two groups.
|
||||
|
||||
!>The DIP switch on the right is invalid for the GSM module, no need to set.
|
||||
?>The DIP switch on the right is invalid for the GSM module, no need to set.
|
||||
|
||||
|
||||
## Product Features
|
||||
|
||||
@@ -83,7 +83,7 @@ Communication Protocol: UART.
|
||||
|
||||
>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning.
|
||||
|
||||
!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
|
||||
## Schematic
|
||||
|
||||
|
||||
@@ -90,7 +90,7 @@ Communication Protocol: I2C.
|
||||
|
||||
>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning.
|
||||
|
||||
!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
|
||||
## Schematic
|
||||
|
||||
|
||||
@@ -63,7 +63,7 @@ Communication Protocol: IIC (0x61).
|
||||
|
||||
>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning.
|
||||
|
||||
!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
|
||||
## PinMap
|
||||
|
||||
|
||||
@@ -22,7 +22,7 @@ If you want to Change the uart baudrate,please check here ( [u-center-just-for-W
|
||||
|
||||
<img src="assets/img/product_pics/module/module_gps_06.webp" width="70%" height="70%">
|
||||
|
||||
!> **M5Stack Fire** has occupied GPIO16 / 17 to connect with the PSRAM by default, it's conflict with TXD / RXD (GPIO16, GPIO17) of GPS module. Therefore, when using the GPS module with the M5Stack Fire, you might have to cut the TXD and RXD from GPS module and wire fly to another set of UART pin
|
||||
?> **M5Stack Fire** has occupied GPIO16 / 17 to connect with the PSRAM by default, it's conflict with TXD / RXD (GPIO16, GPIO17) of GPS module. Therefore, when using the GPS module with the M5Stack Fire, you might have to cut the TXD and RXD from GPS module and wire fly to another set of UART pin
|
||||
|
||||
## Product Features
|
||||
|
||||
@@ -93,7 +93,7 @@ If you want to Change the uart baudrate,please check here ( [u-center-just-for-W
|
||||
|
||||
>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning.
|
||||
|
||||
!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
|
||||
## Example
|
||||
|
||||
|
||||
@@ -28,7 +28,7 @@ Power Operation:
|
||||
|
||||
*The Global System for Mobile Communications (GSM) is a standard developed by the European Telecommunications Standards Institute (ETSI) to describe the protocols for second-generation (2G) digital cellular networks used by mobile devices such as mobile phones and tablets.*
|
||||
|
||||
!> **M5Stack Fire** has occupied GPIO16 / 17 to connect with the PSRAM by default, it's conflict with TXD / RXD (GPIO16, GPIO17) of GSM module. Therefore, when using the GSM module with the M5Stack Fire, you might have to cut the TXD and RXD from GSM module and wire fly to another set of UART pin
|
||||
?> **M5Stack Fire** has occupied GPIO16 / 17 to connect with the PSRAM by default, it's conflict with TXD / RXD (GPIO16, GPIO17) of GSM module. Therefore, when using the GSM module with the M5Stack Fire, you might have to cut the TXD and RXD from GSM module and wire fly to another set of UART pin
|
||||
|
||||
## Product Features
|
||||
|
||||
@@ -115,7 +115,7 @@ Product Feature:
|
||||
|
||||
>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning.
|
||||
|
||||
!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
|
||||
|
||||
## Example
|
||||
|
||||
@@ -60,7 +60,7 @@ JOYSTICK IIC address is 0x5E.
|
||||
|
||||
>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning.
|
||||
|
||||
!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
|
||||
|
||||
## PinMap
|
||||
|
||||
@@ -68,7 +68,7 @@ Series Communication: IIC (0x56).
|
||||
|
||||
>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning.
|
||||
|
||||
!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
|
||||
## PinMap
|
||||
|
||||
|
||||
@@ -78,7 +78,7 @@ LoRa (433MHz) and LoRaWAN permit long-range connectivity for Internet of Things
|
||||
|
||||
>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning.
|
||||
|
||||
!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
|
||||
## Example
|
||||
|
||||
|
||||
@@ -85,7 +85,7 @@ By default, the UART configuration: "9600, 8, n, 1"(8 bits data, no parity, 1 st
|
||||
|
||||
>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning.
|
||||
|
||||
!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
|
||||
## Pin Map
|
||||
|
||||
|
||||
@@ -17,7 +17,7 @@ M8321 is 4V power input, so in the hardware of LTE-4G module, we added a Bidire
|
||||
|
||||
*In telecommunication, Long-Term Evolution (LTE) is a standard for wireless broadband communication for mobile devices and data terminals, based on the GSM/EDGE and UMTS/HSPA technologies. It increases the capacity and speed using a different radio interface together with core network improvements.*
|
||||
|
||||
!> **M5Stack Fire** has occupied GPIO16 / 17 to connect with the PSRAM by default, it's conflict with TXD / RXD (GPIO16, GPIO17) of LTE module. Therefore, when using the LTE module with the M5Stack Fire, you might have to cut the TXD and RXD from LTE module and wire fly to another set of UART pin
|
||||
?> **M5Stack Fire** has occupied GPIO16 / 17 to connect with the PSRAM by default, it's conflict with TXD / RXD (GPIO16, GPIO17) of LTE module. Therefore, when using the LTE module with the M5Stack Fire, you might have to cut the TXD and RXD from LTE module and wire fly to another set of UART pin
|
||||
|
||||
## Product Features
|
||||
|
||||
@@ -114,7 +114,7 @@ Product Feature:
|
||||
|
||||
>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning.
|
||||
|
||||
!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
|
||||
## Example
|
||||
|
||||
|
||||
@@ -30,7 +30,7 @@ Power Operation:
|
||||
|
||||
*More info about NB-IoT: NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage. Battery life of more than 10 years can be supported for a wide range of use cases.Supported by all major mobile equipment, chipset and module manufacturers, NB-IoT can co-exist with 2G, 3G, and 4G mobile networks. It also benefits from all the security and privacy features of mobile networks, such as support for user identity confidentiality, entity authentication, confidentiality, data integrity, and mobile equipment identification. NB-IoT focuses specifically on indoor coverage, low cost, long battery life, and high connection density. NB-IoT uses a subset of the LTE standard, but limits the bandwidth to a single narrow-band of 200kHz. It uses OFDM modulation for downlink communication and SC-FDMA for uplink communications*
|
||||
|
||||
!> **M5Stack Fire** has occupied GPIO16 / 17 to connect with the PSRAM by default, it's conflict with TXD / RXD (GPIO16, GPIO17) of NB-IoT module. Therefore, when using the NB-IoT module with the M5Stack Fire, you might have to cut the TXD and RXD from NB-IoT module and wire fly to another set of UART pin
|
||||
?> **M5Stack Fire** has occupied GPIO16 / 17 to connect with the PSRAM by default, it's conflict with TXD / RXD (GPIO16, GPIO17) of NB-IoT module. Therefore, when using the NB-IoT module with the M5Stack Fire, you might have to cut the TXD and RXD from NB-IoT module and wire fly to another set of UART pin
|
||||
|
||||
|
||||
## Product Features
|
||||
@@ -147,7 +147,7 @@ only for reference
|
||||
|
||||
>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning.
|
||||
|
||||
!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
|
||||
## Example
|
||||
|
||||
|
||||
@@ -23,7 +23,7 @@ Power Operation:
|
||||
|
||||
*More info about NB-IoT: NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage. Battery life of more than 10 years can be supported for a wide range of use cases.Supported by all major mobile equipment, chipset and module manufacturers, NB-IoT can co-exist with 2G, 3G, and 4G mobile networks. It also benefits from all the security and privacy features of mobile networks, such as support for user identity confidentiality, entity authentication, confidentiality, data integrity, and mobile equipment identification. NB-IoT focuses specifically on indoor coverage, low cost, long battery life, and high connection density. NB-IoT uses a subset of the LTE standard, but limits the bandwidth to a single narrow-band of 200kHz. It uses OFDM modulation for downlink communication and SC-FDMA for uplink communications*
|
||||
|
||||
!> **M5Stack Fire** has occupied GPIO16 / 17 to connect with the PSRAM by default, it's conflict with TXD / RXD (GPIO16, GPIO17) of NB-IoT Plus module. Therefore, when using the NB-IoT Plus module with the M5Stack Fire, you might have to cut the TXD and RXD from NB-IoT Plus module and wire fly to another set of UART pin
|
||||
?> **M5Stack Fire** has occupied GPIO16 / 17 to connect with the PSRAM by default, it's conflict with TXD / RXD (GPIO16, GPIO17) of NB-IoT Plus module. Therefore, when using the NB-IoT Plus module with the M5Stack Fire, you might have to cut the TXD and RXD from NB-IoT Plus module and wire fly to another set of UART pin
|
||||
|
||||
## Product Features
|
||||
- Serial communication: UART
|
||||
@@ -138,7 +138,7 @@ only for reference
|
||||
|
||||
>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning.
|
||||
|
||||
!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
|
||||
## Example
|
||||
|
||||
|
||||
@@ -60,7 +60,7 @@
|
||||
|
||||
>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning.
|
||||
|
||||
!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
|
||||
|
||||
## PinMap
|
||||
|
||||
@@ -29,7 +29,7 @@
|
||||
- Working temperature range: -40 do + 85 ° C
|
||||
|
||||
|
||||
!> **M5Stack Fire** has occupied GPIO16 / 17 to connect with the PSRAM by default, it's conflict with TXD / RXD (GPIO16, GPIO17) of SIM800L module. Therefore, when using the SIM800L module with the M5Stack Fire, you might have to cut the TXD and RXD from SIM800L module and wire fly to another set of UART pin
|
||||
?> **M5Stack Fire** has occupied GPIO16 / 17 to connect with the PSRAM by default, it's conflict with TXD / RXD (GPIO16, GPIO17) of SIM800L module. Therefore, when using the SIM800L module with the M5Stack Fire, you might have to cut the TXD and RXD from SIM800L module and wire fly to another set of UART pin
|
||||
|
||||
|
||||
## Include
|
||||
@@ -78,7 +78,7 @@
|
||||
|
||||
>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning.
|
||||
|
||||
!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
|
||||
## Related Link
|
||||
|
||||
|
||||
@@ -72,7 +72,7 @@ Integrated 3 DRV8825, a simple but very powerful board that can control one bipo
|
||||
|
||||
>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning.
|
||||
|
||||
!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
|
||||
## PinMap
|
||||
|
||||
|
||||
@@ -68,7 +68,7 @@ interface. Ever up for adding the standard USB features on your project? this M
|
||||
|
||||
>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning.
|
||||
|
||||
!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
?>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/M5Burner#install-usb-driver)
|
||||
|
||||
|
||||
## Example
|
||||
|
||||
Reference in New Issue
Block a user