diff --git a/docs/en/hat/hat-beetlec.md b/docs/en/hat/hat-beetlec.md index 36a41018..8a847027 100644 --- a/docs/en/hat/hat-beetlec.md +++ b/docs/en/hat/hat-beetlec.md @@ -3,7 +3,7 @@ -:memo:**[Description](#Description)**    **[EasyLoader](#EasyLoader)**    🛒**[Purchase](https://m5stack.com/products/beetlec-w-o-m5stickc)** +:memo:**[Description](#Description)**    **[EasyLoader](#EasyLoader)**    :octocat:**[Code](#Code)**      🛒**[Purchase](https://m5stack.com/products/beetlec-w-o-m5stickc)** ## Description @@ -80,7 +80,7 @@ Besides, a power switch is placed at the front. - **UIFlow** - + ### Arduino IDE diff --git a/docs/en/hat/hat-dac.md b/docs/en/hat/hat-dac.md index 9d100350..22003ea7 100644 --- a/docs/en/hat/hat-dac.md +++ b/docs/en/hat/hat-dac.md @@ -68,6 +68,7 @@ I2C address: 0x60 ## Code - **UIFlow** + Open http://flow.m5stack.com and Load Demo diff --git a/docs/en/hat/hat-env.md b/docs/en/hat/hat-env.md index 004c7a4e..1aaa62a9 100644 --- a/docs/en/hat/hat-env.md +++ b/docs/en/hat/hat-env.md @@ -4,7 +4,7 @@ *** -:memo:**[Description](#Description)**      :electric_plug:**[Schematic](#Schematic)**      🛒**[Purchase](https://m5stack.com/collections/m5-unit/products/m5stickc-env-hat)**   **[EasyLoader](#EasyLoader)** +:memo:**[Description](#Description)**      :electric_plug:**[Schematic](#Schematic)**      :octocat:**[Example](#Example)**      🛒**[Purchase](https://m5stack.com/collections/m5-unit/products/m5stickc-env-hat)**   **[EasyLoader](#EasyLoader)** ## Description @@ -65,7 +65,6 @@ >2. After downloading the software, double-click to run the application, connect the M5 device to the computer through the data cable, select the port parameters, click **"Burn"** to start burning. (**For M5StickC burning, please Set the baud rate to 750000 or 115200**) - ## Example - **UIFlow** @@ -74,7 +73,9 @@ Open http://flow.m5stack.com and Load Demo -- **[Arduino](https://github.com/m5stack/M5StickC/tree/master/examples/Hat/ENV)** +- **Arduino** + + Please click [here](https://github.com/m5stack/M5StickC/tree/master/examples/Hat/ENV) to get complete code ### Pin Map diff --git a/docs/en/hat/hat-neoflash.md b/docs/en/hat/hat-neoflash.md index b81afbdf..a4228b6f 100644 --- a/docs/en/hat/hat-neoflash.md +++ b/docs/en/hat/hat-neoflash.md @@ -69,11 +69,9 @@ If you thinking about adding a display on your project, NeoFlash is a good choic ## Code -- **UIFlow** +- **Arduino** - - -- **[Arduino](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Hat/neoflash-hat/Arduino)** +To get complete code, please click [here](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Hat/neoflash-hat/Arduino) ## Pin Map diff --git a/docs/en/hat/hat-pir.md b/docs/en/hat/hat-pir.md index ee906e47..cb7b1746 100644 --- a/docs/en/hat/hat-pir.md +++ b/docs/en/hat/hat-pir.md @@ -4,7 +4,7 @@ *** -:memo:**[Description](#Description)**      :electric_plug:**[Schematic](#Schematic)**      🛒**[Purchase](https://m5stack.com/collections/m5-unit/products/m5stickccompatible-hat-pir-sensor)**   **[EasyLoader](#EasyLoader)** +:memo:**[Description](#Description)**      :electric_plug:**[Schematic](#Schematic)**      :octocat:**[Example](#Example)**      🛒**[Purchase](https://m5stack.com/collections/m5-unit/products/m5stickccompatible-hat-pir-sensor)**   **[EasyLoader](#EasyLoader)** ## Description @@ -32,7 +32,6 @@ - Security product - Auto-induction - ## Schematic @@ -53,16 +52,17 @@ >2. After downloading the software, double-click to run the application, connect the M5 device to the computer through the data cable, select the port parameters, click **"Burn"** to start burning. (**For M5StickC burning, please Set the baud rate to 750000 or 115200**) - - ## Example - **UIFlow** + Open http://flow.m5stack.com and click Demo to load -- **[Arduino](https://github.com/m5stack/M5StickC/tree/master/examples/Hat/PIR)** +- **Arduino** + + Please click [here](https://github.com/m5stack/M5StickC/tree/master/examples/Hat/PIR) to get complete code ### Pin Map diff --git a/docs/en/hat/hat-spk.md b/docs/en/hat/hat-spk.md index 41b44b05..45affd58 100644 --- a/docs/en/hat/hat-spk.md +++ b/docs/en/hat/hat-spk.md @@ -4,7 +4,7 @@ *** -:memo:**[Description](#Description)**      :electric_plug:**[Schematic](#Schematic)**      🛒**[Purchase](https://m5stack.com/collections/m5-unit/products/m5stickc-speaker-hat)**   **[EasyLoader](#EasyLoader)** +:memo:**[Description](#Description)**      :electric_plug:**[Schematic](#Schematic)**      octocat:**[Example](#Example)**      🛒**[Purchase](https://m5stack.com/collections/m5-unit/products/m5stickc-speaker-hat)**   **[EasyLoader](#EasyLoader)** ## Description @@ -49,8 +49,6 @@ >2. After downloading the software, double-click to run the application, connect the M5 device to the computer through the data cable, select the port parameters, click **"Burn"** to start burning. (**For M5StickC burning, please Set the baud rate to 750000 or 115200**) - - ## Example - **UIFlow** diff --git a/docs/en/hat/hat-yun.md b/docs/en/hat/hat-yun.md index dbe34b74..11046735 100644 --- a/docs/en/hat/hat-yun.md +++ b/docs/en/hat/hat-yun.md @@ -5,7 +5,7 @@ *** -:memo:**[Description](#Description)**      :electric_plug:**[Schematic](#Schematic)**      🛒**[Purchase](https://m5stack.com/products/m5stickc-yun-hatsh20-bmp280-sk6812)**   **[EasyLoader](#EasyLoader)** +:memo:**[Description](#Description)**      :electric_plug:**[Schematic](#Schematic)**      :octocat:**[Example](#Example)**      🛒**[Purchase](https://m5stack.com/products/m5stickc-yun-hatsh20-bmp280-sk6812)**   **[EasyLoader](#EasyLoader)** ## Description @@ -42,7 +42,6 @@ One hook hole and two 6*4mm magnet mounting positions are reserved on the board, - 1x YUN HAT - 2x Dupont - ## Application @@ -51,7 +50,6 @@ One hook hole and two 6*4mm magnet mounting positions are reserved on the board, - Smart home decoration - Fridge Magnet - ## Schematic @@ -83,7 +81,9 @@ Open http://flow.m5stack.com and Load Demo -- **[Arduino](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Hat/hat-yun)** +- **Arduino** + +To get complete code, please click [here](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Hat/hat-yun) ### Pin Map diff --git a/docs/en/module/faces_finger.md b/docs/en/module/faces_finger.md index b31731a1..854eab3b 100644 --- a/docs/en/module/faces_finger.md +++ b/docs/en/module/faces_finger.md @@ -68,6 +68,8 @@ Communication Protocol: UART. - Datasheet **[FPC1020A](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/hat/1020A_datasheet_cn.pdf)** +## Code + ### Arduino IDE *If you want the complete code, please click [here](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Module/FACES_FINGER)* diff --git a/docs/en/module/faces_rfid.md b/docs/en/module/faces_rfid.md index 0d003cce..9d2ecadb 100644 --- a/docs/en/module/faces_rfid.md +++ b/docs/en/module/faces_rfid.md @@ -68,6 +68,8 @@ Communication Protocol: I2C. - Datasheet **[MFRC522](https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/datasheet/module/MFRC522_en.pdf)** +## Code + ### Arduino IDE *If you want the complete code, please click [here](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Module/FACES_RFID)* diff --git a/docs/en/unit/m5-bit.md b/docs/en/unit/m5-bit.md index 143ca0ed..84927847 100644 --- a/docs/en/unit/m5-bit.md +++ b/docs/en/unit/m5-bit.md @@ -4,7 +4,7 @@ * * * -:memo:**[Description](#Description)**   🛒**[Purchase](https://m5stack.com/collections/m5-unit/products/m5-bit-iot-classroom-development-board)**       +:memo:**[Description](#Description)**   :octocat:**[Example](#Example)**   🛒**[Purchase](https://m5stack.com/collections/m5-unit/products/m5-bit-iot-classroom-development-board)**       ## Description diff --git a/docs/en/unit/pbhub.md b/docs/en/unit/pbhub.md index 4cef49bb..a5ff0b68 100644 --- a/docs/en/unit/pbhub.md +++ b/docs/en/unit/pbhub.md @@ -5,7 +5,7 @@ -:memo:**[Description](#Description)**      :electric_plug:**[Schematic](#Schematic)**      🛒**[Purchase](https://m5stack.com/collections/m5-unit/products/pb-hub)**      :octocat:**[Code](#Code)**   **[EasyLoader](#EasyLoader)** +:memo:**[Description](#Description)**      :electric_plug:**[Schematic](#Schematic)**      🛒**[Purchase](https://m5stack.com/collections/m5-unit/products/pb-hub)**      :octocat:**[例程](#例程)**   **[EasyLoader](#EasyLoader)** ## Description @@ -61,7 +61,7 @@ See the below picture for timing sequence of HX711: -## Code +## 例程 ### 1. Arduino IDE diff --git a/docs/en/unit/rs485.md b/docs/en/unit/rs485.md index 951e5e25..2756c03c 100644 --- a/docs/en/unit/rs485.md +++ b/docs/en/unit/rs485.md @@ -4,7 +4,7 @@ *** -:memo:**[Description](#Description)**      🛒**[Purchase](https://m5stack.com/collections/m5-unit/products/rs485-module)**   **[EasyLoader](#EasyLoader)** +:memo:**[Description](#Description)**      :octocat:**[Example](#Example)**      🛒**[Purchase](https://m5stack.com/collections/m5-unit/products/rs485-module)**   **[EasyLoader](#EasyLoader)** ## Description diff --git a/docs/zh_CN/hat/hat-adc.md b/docs/zh_CN/hat/hat-adc.md index 21a48fd4..173a7440 100644 --- a/docs/zh_CN/hat/hat-adc.md +++ b/docs/zh_CN/hat/hat-adc.md @@ -4,7 +4,7 @@ *** -:memo:**[描述](#Description)**      :electric_plug:**[原理图](#原理图)**      :octocat:**[Code](#Code)**      **[EasyLoader](#EasyLoader)**       🛒**[购买链接](https://m5stack.com/collections/m5-unit/products/m5stickc-adc-hat)** +:memo:**[描述](#Description)**      :electric_plug:**[原理图](#原理图)**      :octocat:**[例程](#例程)**      **[EasyLoader](#EasyLoader)**       🛒**[购买链接](https://m5stack.com/collections/m5-unit/products/m5stickc-adc-hat)** ## 描述 @@ -64,14 +64,15 @@ ADS1100允许-5~ + 5V的差分输入，但我们通过增加该IC的外围电路 >2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录.(**为M5StickC烧录时，请将波特率设置在750000或115200**) -## Code +## 例程 - **UIFlow** + 打开 http://flow.m5stack.com 点击Demo载入UIFlow例程 -### 1. Arduino IDE +### Arduino IDE *以下代码仅为片段，如需获取完整代码，[请点击此处.](https://github.com/m5stack/M5StickC/tree/master/examples/Hat/ADC).* diff --git a/docs/zh_CN/hat/hat-beetlec.md b/docs/zh_CN/hat/hat-beetlec.md index 7e8d4c87..5e0b9d95 100644 --- a/docs/zh_CN/hat/hat-beetlec.md +++ b/docs/zh_CN/hat/hat-beetlec.md @@ -2,7 +2,7 @@ -:memo:**[描述](#描述)**    **[EasyLoader](#EasyLoader)**  🛒**[购买链接](https://m5stack.com/products/beetlec-w-o-m5stickc)**  +:memo:**[描述](#描述)**    **[EasyLoader](#EasyLoader)**  :octocat:**[例程](#例程)**      🛒**[购买链接](https://m5stack.com/products/beetlec-w-o-m5stickc)**  @@ -76,7 +76,7 @@ Beetlec底座需要结合M5StickC控制器使用.在底座上，配备了两个 - 向上推动控制杆以加速车轮，向下推动减速. - 底部有四个颜色的螺栓.彩色块用于打开底部的所有RGB LED指定的颜色. 黑色挡将关闭灯. -## Code +## 例程 - **UIFlow** diff --git a/docs/zh_CN/hat/hat-dac.md b/docs/zh_CN/hat/hat-dac.md index 276198ca..9d609d3e 100644 --- a/docs/zh_CN/hat/hat-dac.md +++ b/docs/zh_CN/hat/hat-dac.md @@ -4,7 +4,7 @@ *** -:memo:**[描述](#描述)**      :electric_plug:**[原理图](#原理图)**      🛒**[购买链接](https://m5stack.com/collections/m5-unit/products/m5stickc-env-hat)**   **[EasyLoader](#EasyLoader)** +:memo:**[描述](#描述)**      :electric_plug:**[原理图](#原理图)**      :octocat:**[例程](#例程)**      🛒**[购买链接](https://m5stack.com/collections/m5-unit/products/m5stickc-env-hat)**   **[EasyLoader](#EasyLoader)** @@ -13,8 +13,6 @@ **DAC Hat**是一款兼容M5SticKC的DA转换模块，内部集成DAC转换芯片MCP4725，具备低功耗，高精度，单通道，12位缓冲电压输出数模转换器（DAC），非易失性存储器（EEPROM）.其片上精密输出放大器使其能够达到轨到轨模拟输出摆幅.用户可以使用I2C接口命令将DAC输入和配置烧写到非易失性存储器（EEPROM）中，使得DAC在断电期间仍能保持代码，上电后即可直接使用,I2C地址为0x60. - - ## 产品特性 - 输出电压: 0-3.3V @@ -46,8 +44,6 @@ - 数据采集系统 - - ## 原理图 @@ -66,6 +62,7 @@ ## 例程 - **UIFlow** + 打开 http://flow.m5stack.com 点击Demo载入UIFlow例程 @@ -80,6 +77,7 @@ ## 相关视频 + **Demo**