diff --git a/docs/zh_CN/api/axp192_core2.md b/docs/zh_CN/api/axp192_core2.md
new file mode 100644
index 00000000..368c900a
--- /dev/null
+++ b/docs/zh_CN/api/axp192_core2.md
@@ -0,0 +1,320 @@
+# AXP192
+
+**AXP192 是一款高度集成的电源系统管理芯片。**
+
+## SetLed()
+
+**函数原型：**
+
+<mark>void SetLed(uint8_t state);</mark>
+
+**功能：设置LED电源指示灯。**
+
+**例程：**
+```arduino
+#include <M5Core2.h>
+
+void setup() {
+  M5.begin(); //By default, "M5.begin()" will initialize AXP192 chip
+  M5.Axp.SetLed(1);
+}
+void loop() {}
+```
+
+## CHGCurrent()
+
+**函数原型:**
+
+<mark>void SetCHGCurrent(uint8_t state);</mark>
+
+**功能: 设置充电电流.**
+
+**例程:**
+
+```arduino
+#include <M5Core2.h>
+
+void setup() { 
+  M5.begin();
+  M5.Axp.SetCHGCurrent(AXP192::kCHG_190mA);
+}
+void loop() {
+}
+```
+
+
+## setSpkEnable()
+
+**函数原型：**
+
+<mark>void SetSpkEnable(uint8_t state);</mark>
+
+**功能：使能扬声器。**
+
+**例程：**
+```arduino
+#include <M5Core2.h>
+
+void setup() {
+  M5.begin(); //By default, "M5.begin()" will initialize AXP192 chip
+  M5.Axp.SetSpkEnable(1);
+}
+void loop() {
+
+}
+```
+
+## SetBusPowerMode()
+
+**函数原型：**
+
+<mark>void SetBusPowerMode(uint8_t state);</mark>
+
+**功能：使能总线电源输出**
+
+**例程：**
+```arduino
+#include <M5Core2.h>
+
+void setup() {
+  M5.begin(); //By default, "M5.begin()" will initialize AXP192 chip
+}
+
+void loop() {
+    M5.Axp.SetBusPowerMode(1);
+}
+```
+
+## SetLcdVoltage()
+
+**函数原型:**
+
+<mark>void SetLcdVoltage(uint16_t voltage)</mark>
+
+**功能: 设置屏幕背光电压.**
+
+**例程:**
+
+```arduino
+#include <M5Core2.h>
+
+
+void setup() { 
+  M5.begin();
+  M5.Axp.SetLcdVoltage(3300);
+}
+void loop() {
+
+}
+```
+
+## SetLDOEnable()
+
+**函数原型:**
+
+<mark>void SetLDOEnable(uint8_t number, bool state)</mark>
+
+**功能: 使能LDO引脚**
+
+**例程:**
+
+```arduino
+#include <M5Core2.h>
+
+void setup() {
+  M5.begin();
+}
+
+void loop() {
+    M5.Axp.SetLDOEnable(3, 1);
+    delay(200);
+    M5.Axp.SetLDOEnable(3, 0);
+    delay(200);
+}
+```
+
+## SetLDOVoltage()
+
+**函数原型:**
+
+<mark>void SetLDOVoltage(uint8_t number, uint16_t voltage);</mark>
+
+**功能: 配置LDO引脚电压**
+
+**例程:**
+
+```arduino
+#include <M5Core2.h>
+
+void setup() { 
+  M5.begin();
+  M5.Axp.SetLDOVoltage(3,3300);   
+}
+void loop() {
+
+}
+```
+
+
+## isACIN()
+
+**函数原型：**
+
+<mark>bool isACIN()</mark>
+
+**功能：判断是否外接供电**
+
+**例程：**
+```arduino
+#include <M5Core2.h>
+
+void setup() {
+  M5.begin(); //By default, "M5.begin()" will initialize AXP192 chip
+}
+
+void loop() {
+    if(M5.Axp.isACIN){
+        Serial.print("AC IN");
+    }else{
+        Serial.print("Battery powered");
+    }
+}
+```
+
+## GetVapsData()
+
+**函数原型:**
+
+<mark>uint16_t GetVapsData(void);</mark>
+
+**功能: 获取电池容量.**
+
+**例程:**
+
+```arduino
+#include <M5Core2.h>
+
+int Vaps;
+
+void setup() {
+  M5.begin(); //By default, "M5.begin()" will initialize AXP192 chip
+}
+
+void loop() {
+  Vaps = M5.Axp.GetVapsData();
+  M5.Lcd.setCursor(0, 0, 1);
+  M5.Lcd.printf("battery capacity :%dmW\r\n", Vaps);
+  delay(500);
+}
+```
+
+## GetTempData()
+
+**函数原型:**
+
+<mark>uint16_t GetTempData(void);</mark>
+
+**功能: 获取芯片温度.**
+
+**例程:**
+
+```arduino
+#include <M5Core2.h>
+
+int temp;
+
+void setup() {
+  M5.begin(); //By default, "M5.begin()" will initialize AXP192 chip
+  M5.Lcd.fillScreen(BLACK);
+}
+
+void loop() {
+  temp = M5.Axp.GetTempData()*0.1-144.7;
+  M5.Lcd.setCursor(0, 0, 1);
+  M5.Lcd.printf("tempurature:%d\r\n", temp);
+  delay(500);
+}
+```
+
+
+## GetIdischargeData()
+
+**函数原型:**
+
+<mark>uint16_t GetIdischargeData(void);</mark>
+
+**功能: 获取放电电流.**
+
+**例程:**
+
+```arduino
+#include <M5Core2.h>
+
+int disCharge;
+
+void setup() {
+  M5.begin(); //By default, "M5.begin()" will initialize AXP192 chip
+  M5.Lcd.fillScreen(BLACK);
+}
+
+void loop() {
+  disCharge = M5.Axp.GetIdischargeData() / 2;
+  M5.Lcd.setCursor(0, 0, 1);
+  M5.Lcd.printf("disCharge:%dma\r\n", disCharge);
+  delay(500);
+}
+```
+
+
+## GetIinData()
+
+**函数原型:**
+
+<mark>uint16_t GetIinData(void);</mark>
+
+**功能: 获取输入电流.**
+
+**例程:**
+
+```arduino
+#include <M5Core2.h>
+
+void setup() {
+  M5.begin(); //By default, "M5.begin()" will initialize AXP192 chip
+  M5.Lcd.fillScreen(BLACK);
+}
+
+void loop() {
+  M5.Lcd.setCursor(0, 0, 1);
+  M5.Lcd.printf("Iin:%.3fmA\r\n",M5.Axp.GetIinData() * 0.625);
+}
+```
+
+
+## GetIusbinData()
+
+**函数原型:**
+
+<mark>uint16_t GetIusbinData(void);</mark>
+
+**功能:获取USB电流.**
+
+**例程:**
+
+```arduino
+#include <M5Core2.h>
+
+int Iusb;
+
+void setup() {
+  M5.begin(); //By default, "M5.begin()" will initialize AXP192 chip
+  M5.Lcd.fillScreen(BLACK);
+}
+
+void loop() {
+  Iusb = M5.Axp.GetIdischargeData() * 0.375;
+  M5.Lcd.setCursor(0, 0, 1);
+  M5.Lcd.printf("Iusbin:%da\r\n", Iusb);
+  delay(500);
+}
+```
\ No newline at end of file