From 874752e6cbd5290e01b16e6ebc6cc9ef64c1f9ed Mon Sep 17 00:00:00 2001 From: LiHuashen <854410664@qq.com> Date: Thu, 28 Feb 2019 13:43:11 +0800 Subject: [PATCH] .. --- docs/coverpage.md | 2 +- docs/en/core/basic.md | 2 +- docs/en/core/fire.md | 4 +-- docs/en/core/gray.md | 18 +++++++--- docs/en/core/m5go.md | 2 +- docs/en/core/m5go_lite.md | 2 +- docs/en/core/m5stick.md | 2 +- docs/en/core/white.md | 2 +- docs/en/module/servo.md | 6 ++-- docs/en/qs.md | 2 +- docs/en/quick_start/bala/bala_quick_start.md | 2 +- .../m5stack_core_get_started_MicroPython.md | 12 +++---- .../m5core/m5stack_core_quick_start.md | 2 +- .../m5stick/m5stick_quick_start.md | 2 +- .../related_documents/how_to_burn_firmware.md | 6 ++-- .../how_to_connect_wifi_using_core.md | 4 +-- docs/en/unit/396port.md | 2 +- docs/en/unit/adc.md | 2 +- docs/en/unit/angle.md | 2 +- docs/en/unit/button.md | 2 +- docs/en/unit/color.md | 2 +- docs/en/unit/dac.md | 2 +- docs/en/unit/dual_button.md | 2 +- docs/en/unit/earth.md | 2 +- docs/en/unit/env.md | 2 +- docs/en/unit/extio.md | 2 +- docs/en/unit/gps.md | 2 +- docs/en/unit/hub.md | 2 +- docs/en/unit/ir.md | 2 +- docs/en/unit/joystick.md | 2 +- docs/en/unit/light.md | 2 +- docs/en/unit/makey.md | 2 +- docs/en/unit/ncir.md | 2 +- docs/en/unit/pir.md | 2 +- docs/en/unit/proto.md | 2 +- docs/en/unit/relay.md | 2 +- docs/en/unit/rgb.md | 2 +- docs/en/unit/rs485.md | 2 +- docs/en/unit/thermal.md | 2 +- docs/en/unit/tof.md | 2 +- docs/en/unit/trace.md | 2 +- docs/en/unit/weight.md | 2 +- docs/ja/core/basic.md | 10 ++++-- docs/ja/core/face_kit.md | 10 ++++-- docs/ja/core/fire.md | 14 +++++--- docs/ja/core/gray.md | 30 ++++++++++++---- docs/ja/core/m5go.md | 14 +++++--- docs/ja/core/m5go_lite.md | 14 +++++--- docs/ja/core/m5stick.md | 12 ++++--- docs/ja/core/white.md | 12 ++++--- docs/ja/faq.md | 4 +-- docs/ja/module/servo.md | 8 ++--- docs/ja/qs.md | 2 +- docs/ja/quick_start/bala/bala_quick_start.md | 6 ++-- .../m5stack_core_get_started_MicroPython.md | 14 ++++---- .../m5core/m5stack_core_quick_start.md | 2 +- .../m5stick/m5stick_quick_start.md | 2 +- .../m5stick_quick_start_with_uiflow.md | 6 ++-- .../related_documents/how_to_burn_firmware.md | 6 ++-- .../how_to_connect_wifi_using_core.md | 4 +-- docs/ja/unit/adc.md | 2 +- docs/ja/unit/angle.md | 2 +- docs/ja/unit/earth.md | 2 +- docs/ja/unit/env.md | 2 +- docs/ja/unit/extio.md | 2 +- docs/ja/unit/gps.md | 2 +- docs/ja/unit/ir.md | 2 +- docs/ja/unit/makey.md | 2 +- docs/ja/unit/ncir.md | 2 +- docs/ja/unit/neopixel.md | 2 +- docs/ja/unit/pir.md | 2 +- docs/ja/unit/relay.md | 4 +-- docs/ja/unit/rgb.md | 2 +- docs/ja/unit/rs485.md | 2 +- docs/ja/unit/trace.md | 2 +- docs/ja/unit/weight.md | 2 +- docs/zh_CN/core/basic.md | 4 +-- docs/zh_CN/core/fire.md | 6 ++-- docs/zh_CN/core/gray.md | 36 +++++++++++-------- docs/zh_CN/core/m5go.md | 4 +-- docs/zh_CN/core/m5go_lite.md | 4 +-- docs/zh_CN/core/m5stick.md | 2 +- docs/zh_CN/module/gps.md | 2 +- docs/zh_CN/module/lora.md | 2 +- docs/zh_CN/module/servo.md | 10 ++++-- docs/zh_CN/qs.md | 2 +- .../quick_start/bala/bala_quick_start.md | 6 ++-- .../m5stack_core_get_started_MicroPython.md | 22 ++++++------ .../m5core/m5stack_core_quick_start.md | 4 +-- .../m5stick/m5stick_quick_start.md | 6 ++-- .../related_documents/how_to_burn_firmware.md | 8 ++--- .../how_to_connect_wifi_using_core.md | 10 +++--- docs/zh_CN/unit/396port.md | 2 +- docs/zh_CN/unit/adc.md | 2 +- docs/zh_CN/unit/angle.md | 2 +- docs/zh_CN/unit/button.md | 2 +- docs/zh_CN/unit/cardkb.md | 2 +- docs/zh_CN/unit/catear.md | 2 +- docs/zh_CN/unit/dac.md | 2 +- docs/zh_CN/unit/dual_button.md | 2 +- docs/zh_CN/unit/earth.md | 2 +- docs/zh_CN/unit/env.md | 2 +- docs/zh_CN/unit/extio.md | 2 +- docs/zh_CN/unit/gps.md | 2 +- docs/zh_CN/unit/heart.md | 2 +- docs/zh_CN/unit/hex.md | 2 +- docs/zh_CN/unit/ir.md | 2 +- docs/zh_CN/unit/joystick.md | 2 +- docs/zh_CN/unit/light.md | 2 +- docs/zh_CN/unit/makey.md | 2 +- docs/zh_CN/unit/ncir.md | 2 +- docs/zh_CN/unit/neoflash.md | 2 +- docs/zh_CN/unit/neopixel.md | 4 +-- docs/zh_CN/unit/pir.md | 2 +- docs/zh_CN/unit/proto.md | 2 +- docs/zh_CN/unit/relay.md | 2 +- docs/zh_CN/unit/rgb.md | 2 +- docs/zh_CN/unit/rs485.md | 2 +- docs/zh_CN/unit/thermal.md | 2 +- docs/zh_CN/unit/tof.md | 2 +- docs/zh_CN/unit/trace.md | 2 +- docs/zh_CN/unit/weight.md | 2 +- 122 files changed, 291 insertions(+), 225 deletions(-) diff --git a/docs/coverpage.md b/docs/coverpage.md index ed714b1b..94472cc4 100644 --- a/docs/coverpage.md +++ b/docs/coverpage.md @@ -4,7 +4,7 @@ - A series of modular stackable development devices integrating WIFI/BLE - For Industry Development/STEM Education -- Programming with UiFlow(Blockly/MicroPython) +- Programming with UIFlow(Blockly/MicroPython) [Official Website](http://www.m5stack.com) [Introdction](#main) diff --git a/docs/en/core/basic.md b/docs/en/core/basic.md index 968245ee..88d01ee6 100644 --- a/docs/en/core/basic.md +++ b/docs/en/core/basic.md @@ -16,7 +16,7 @@ This is a [Bottom board](en/base/core_bottom) on the back of M5Core. It's design ## Feature -- Programming Support: [UiFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/) and [Arduino](http://www.arduino.cc) +- Programming Support: [UIFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/) and [Arduino](http://www.arduino.cc) - TF Card Support(Up to 16GB) ## Source PinMap diff --git a/docs/en/core/fire.md b/docs/en/core/fire.md index 327264f8..98ddd225 100644 --- a/docs/en/core/fire.md +++ b/docs/en/core/fire.md @@ -1,6 +1,6 @@ # M5Stack FIRE {docsify-ignore-all} -fire_01 +fire_01 * * * @@ -21,7 +21,7 @@ M5Go CHG. Base is composed of POGO pin. M5Go Base is composed of PORT B, PORT C, ## Feature - Programming Support - - UiFlow + - UIFlow - MicroPython - Arduino - Compatible LEGO diff --git a/docs/en/core/gray.md b/docs/en/core/gray.md index c6aa6052..6d8d044a 100644 --- a/docs/en/core/gray.md +++ b/docs/en/core/gray.md @@ -1,6 +1,6 @@ # M5Core GRAY {docsify-ignore-all} -gray_02 gray_02 gray_04 +gray_02gray_02 @@ -14,13 +14,19 @@ The M5Core GRAY equips the ESP32 with everything necessary to program, run and develop on the wonderchip. It also features a MEMS Chip(**MPU9250**), and a TFT LCD, so you can create a 3D remote gesture controller, a simple "Leap Motion" via M5Core GRAY in a day in stead of couple weeks and so on. + + This is a [Bottom board](en/base/core_bottom) on the back of M5Core. It's designed for expanding gpio on M-Bus besides I2S Pins(GPIO0, GPIO12, GPIO13, GPIO15, GPIO34)for DIY. Each gpio on M-Bus is expanded as pin and port for convenience and flexibility. + + ## Feature -- Programming Support: [UiFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/) and [Arduino](http://www.arduino.cc) +- Programming Support: [UIFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/) and [Arduino](http://www.arduino.cc) - TF Card Support(Up to 16GB) + + ## PinMap #### MainBoard Pinmap @@ -168,11 +174,15 @@ This is a [Bottom board](en/base/core_bottom) on the back of M5Core. It's design - Type-C USB Cable - User Manual +gray_04 + + + ## Related Link -- **Datasheet** - [ESP32](https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_cn.pdf) - [MPU9250](http://www.invensense.com/wp-content/uploads/2015/02/PS-MPU-9250A-01-v1.1.pdf) +- **Datasheet** - [ESP32](https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf) - [MPU9250](http://www.invensense.com/wp-content/uploads/2015/02/PS-MPU-9250A-01-v1.1.pdf) -- **Datasheet** - [ESP32](https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_cn.pdf) + ## Related Video diff --git a/docs/en/core/m5go.md b/docs/en/core/m5go.md index 05588540..b5d2d13f 100644 --- a/docs/en/core/m5go.md +++ b/docs/en/core/m5go.md @@ -12,7 +12,7 @@ **M5GO IOT Starter Kit** is a kit designed for learning IOT programming which consists of 6 units(ENV, IR, RGB, PIR, ANGLE, HUB), one white M5Core(based on ESP32 chip) and a [M5GO bottom](en/base/m5go_bottom). -Programming M5GO with [UiFlow](http://flow.m5stack.com) or Arduino IDE. +Programming M5GO with [UIFlow](http://flow.m5stack.com) or Arduino IDE. We also supply some courses for teaching IOT programming. If you are interesting in it, contact us through Email please. diff --git a/docs/en/core/m5go_lite.md b/docs/en/core/m5go_lite.md index c49845c9..bd432911 100644 --- a/docs/en/core/m5go_lite.md +++ b/docs/en/core/m5go_lite.md @@ -15,7 +15,7 @@ **M5GO Lite** is a small kit which consists of one **ENV unit**, a **white M5Core**(based on ESP32 chip) and a [M5GO bottom](en/base/m5go_bottom). It's a simple version of [M5GO IOT Starter Kit](en/core/m5go_iot_starter_kit). -You can program M5GO Lite with [UiFlow](http://flow.m5stack.com) or Arduino IDE. +You can program M5GO Lite with [UIFlow](http://flow.m5stack.com) or Arduino IDE. We also supply some courses for teaching IOT programming. If you are interesting in it, contact us through Email please. diff --git a/docs/en/core/m5stick.md b/docs/en/core/m5stick.md index 5f4c56e3..01ce9418 100644 --- a/docs/en/core/m5stick.md +++ b/docs/en/core/m5stick.md @@ -17,7 +17,7 @@ There are two version of it. White version does not contain MPU9250, gray versio ## Feature -- Programming Support: Arduino, UiFlow(Blockly, MicroPython) +- Programming Support: Arduino, UIFlow(Blockly, MicroPython) - Wearable - Gray version: MEMS(MPU9250) diff --git a/docs/en/core/white.md b/docs/en/core/white.md index 8dd206e9..bf775a63 100644 --- a/docs/en/core/white.md +++ b/docs/en/core/white.md @@ -11,7 +11,7 @@ The a Bottom board on the back of M5Core. It's designed for expanding gpio on M- ## Feature - Programming Support - - UiFlow + - UIFlow - MicroPython - Arduino - Compatible LEGO diff --git a/docs/en/module/servo.md b/docs/en/module/servo.md index ab1c62cb..85f3999a 100644 --- a/docs/en/module/servo.md +++ b/docs/en/module/servo.md @@ -10,7 +10,7 @@ **Servo** is a servo-motor driver module which can drive 12-way servo motors simultaneously. But actually, in our experiment, because of the maximum current, the maximum number of servo motor it can drive is 9. So we will publish a upgraded version soon after. -It's too easy to drive servo motors so that you can drive many servo motors after programmed 2-3 lines code in Arduino IDE or dragged 2-3 block in UiFlow. +It's too easy to drive servo motors so that you can drive many servo motors after programmed 2-3 lines code in Arduino IDE or dragged 2-3 block in UIFlow. Servo is communicated with M5Core through GROVE interface(I2C communication). The I2C address is 0x53. @@ -18,7 +18,7 @@ Servo is communicated with M5Core through GROVE interface(I2C communication). Th - Drive multi-way servo motor simultaneously - Support wide-voltage power input: 6-12V -- Support programming with Arduino IDE or UiFlow +- Support programming with Arduino IDE or UIFlow ## Include @@ -77,7 +77,7 @@ Wire.endTransmission(); ## Video Tutorial - + ## SERVO Case diff --git a/docs/en/qs.md b/docs/en/qs.md index f0c6260d..eb53e12e 100644 --- a/docs/en/qs.md +++ b/docs/en/qs.md @@ -12,4 +12,4 @@ | | ---|---|--- -[Arduino](/en/practice/practice_arduino) | [UiFlow-Blockly](/en/practice/practice_blockly) | [UiFlow-MicroPython](/en/practice/practice_micropython) --> +[Arduino](/en/practice/practice_arduino) | [UIFlow-Blockly](/en/practice/practice_blockly) | [UIFlow-MicroPython](/en/practice/practice_micropython) --> diff --git a/docs/en/quick_start/bala/bala_quick_start.md b/docs/en/quick_start/bala/bala_quick_start.md index cf120978..776dd32d 100644 --- a/docs/en/quick_start/bala/bala_quick_start.md +++ b/docs/en/quick_start/bala/bala_quick_start.md @@ -31,7 +31,7 @@ -6. Open [UiFlow](http://flow.m5stack.com/) website, and switch programming language from `Blockly` to `Python`. +6. Open [UIFlow](http://flow.m5stack.com/) website, and switch programming language from `Blockly` to `Python`. diff --git a/docs/en/quick_start/m5core/m5stack_core_get_started_MicroPython.md b/docs/en/quick_start/m5core/m5stack_core_get_started_MicroPython.md index 12d2926b..fb7c46bc 100644 --- a/docs/en/quick_start/m5core/m5stack_core_get_started_MicroPython.md +++ b/docs/en/quick_start/m5core/m5stack_core_get_started_MicroPython.md @@ -1,8 +1,8 @@ -# UiFlow Quick Start(Blockly/MicroPython) {docsify-ignore-all} +# UIFlow Quick Start(Blockly/MicroPython) {docsify-ignore-all} :clapper: **[Video Tutorial](#Video-Tutorial)**      :memo: **[Text Tutorial](#Text-Tutorial)** -?> a. If your M5Stack Core was not burnt with a specific firmware named `UiFlow` in advance, please visit this article [How to burn firmware](/en/related_documents/how_to_burn_firmware) for burnning). b. If it's first time to use M5Stack Core or you want to change the networkable AP that means the Core can't access [flow.m5stack.com](http://flow.m5stack.com), you need visit this article for setting wifi [How to connect wifi using Core](/en/related_documents/how_to_connect_wifi_using_core). +?> a. If your M5Stack Core was not burnt with a specific firmware named `UIFlow` in advance, please visit this article [How to burn firmware](/en/related_documents/how_to_burn_firmware) for burnning). b. If it's first time to use M5Stack Core or you want to change the networkable AP that means the Core can't access [flow.m5stack.com](http://flow.m5stack.com), you need visit this article for setting wifi [How to connect wifi using Core](/en/related_documents/how_to_connect_wifi_using_core). By default, we account your M5Core has been connected with the networkable AP. And the screen shows like this figure below after you pressed the `UPLOAD` button on the left. After a few seconds if nothing is pressed the M5 will automatically run the code that was previously uploaded. If we want to upload new code we have to make sure we press the `upload` button on this menu before the M5 boots the code in it’s memory. @@ -14,14 +14,14 @@ By default, we account your M5Core has been connected with the networkable AP. A ## Text Tutorial -1. [Connect to UiFlow](#connect-to-uiflow) +1. [Connect to UIFlow](#connect-to-uiflow) 2. [Program with Core](#program-with-core) 3. [Play a song now](#play-a-song-now) -## 1. Connect to UiFlow +## 1. Connect to UIFlow 1. Now you scan the QR code with your phone or tablet to start programming on your mobile device. If you want to program the M5 from your computer, enter the url shown at the top of the screen `flow.m5stack.com`. It will show as following figure. @@ -35,7 +35,7 @@ By default, we account your M5Core has been connected with the networkable AP. A -Then UiFlow will connect with this Core. +Then UIFlow will connect with this Core. At the moment, you can draw a UI or program it through Blockly(or Python) as shown below. @@ -102,7 +102,7 @@ Now, run it and enjoy your musical work! ## Complete -?> *Absolutely, For being more familiar with M5, you can contact us for a WorkShop * +?> *Absolutely, For being more familiar with M5, you can read [the tutorial documentation of UIFlow](https://m5stack.github.io/UIFlow_doc/cn/index.html).* ## Video Tutorial diff --git a/docs/en/quick_start/m5core/m5stack_core_quick_start.md b/docs/en/quick_start/m5core/m5stack_core_quick_start.md index 20351170..81f5cf9f 100644 --- a/docs/en/quick_start/m5core/m5stack_core_quick_start.md +++ b/docs/en/quick_start/m5core/m5stack_core_quick_start.md @@ -4,4 +4,4 @@ | | ---|---|--- -[Arduino-MacOS](en/quick_start/m5core/m5stack_core_get_started_Arduino_MacOS) | [Arduino-Windows](en/quick_start/m5core/m5stack_core_get_started_Arduino_Windows) | [UiFlow](en/quick_start/m5core/m5stack_core_get_started_MicroPython) +[Arduino-MacOS](en/quick_start/m5core/m5stack_core_get_started_Arduino_MacOS) | [Arduino-Windows](en/quick_start/m5core/m5stack_core_get_started_Arduino_Windows) | [UIFlow](en/quick_start/m5core/m5stack_core_get_started_MicroPython) diff --git a/docs/en/quick_start/m5stick/m5stick_quick_start.md b/docs/en/quick_start/m5stick/m5stick_quick_start.md index b49541dc..7b22978b 100644 --- a/docs/en/quick_start/m5stick/m5stick_quick_start.md +++ b/docs/en/quick_start/m5stick/m5stick_quick_start.md @@ -4,4 +4,4 @@ | | ---|---|--- -[Arduino-MacOS](en/quick_start/m5stick/m5stick_quick_start_with_arduino_MacOS) | [Arduino-Windows](en/quick_start/m5stick/m5stick_quick_start_with_arduino_Windows) | [UiFlow](en/quick_start/m5stick/m5stick_quick_start_with_uiflow) +[Arduino-MacOS](en/quick_start/m5stick/m5stick_quick_start_with_arduino_MacOS) | [Arduino-Windows](en/quick_start/m5stick/m5stick_quick_start_with_arduino_Windows) | [UIFlow](en/quick_start/m5stick/m5stick_quick_start_with_uiflow) diff --git a/docs/en/related_documents/how_to_burn_firmware.md b/docs/en/related_documents/how_to_burn_firmware.md index 1c1e80e2..8cbf0a16 100644 --- a/docs/en/related_documents/how_to_burn_firmware.md +++ b/docs/en/related_documents/how_to_burn_firmware.md @@ -38,7 +38,7 @@ Unzip the M5Burner tool which you donwloaded for official website just now, then **Then choice the `serial port` which is connected with your board and the `Baud` which is 921600 following below steps. Choice a right firmware, click `Erase` and then click `Burn`.** -- If you want to program with [UiFlow](http://flow.m5stack.com)(/[M5Cloud](http://cloud.m5stack.com)), select `M5Flow-vx.x`(/`M5Cloud-vx.x.x`) option(the lastest version). +- If you want to program with [UIFlow](http://flow.m5stack.com)(/[M5Cloud](http://cloud.m5stack.com)), select `M5Flow-vx.x`(/`M5Cloud-vx.x.x`) option(the lastest version). - If you own a ESP32CAM (/ M5CAMERA), select `M5Cam-vx.x (/M5Cam-psram)` option @@ -49,7 +49,7 @@ Unzip the M5Burner tool which you donwloaded for official website just now, then **a. Choice a right firmware** -a. select `M5Flow-vx.x` option(the lastest version), if you want to program with [UiFlow](http://flow.m5stack.com) +a. select `M5Flow-vx.x` option(the lastest version), if you want to program with [UIFlow](http://flow.m5stack.com) b. select `M5Cam-vx.x (/M5Cam-psram)` option, if you own a ESP32CAM (/ M5CAMERA) @@ -183,4 +183,4 @@ Plug the M5Core in, and enter `sudo chmod +x *.sh` for granting `root` authority **Windows** - \ No newline at end of file + \ No newline at end of file diff --git a/docs/en/related_documents/how_to_connect_wifi_using_core.md b/docs/en/related_documents/how_to_connect_wifi_using_core.md index d35d8f9b..fb2d0c00 100644 --- a/docs/en/related_documents/how_to_connect_wifi_using_core.md +++ b/docs/en/related_documents/how_to_connect_wifi_using_core.md @@ -4,7 +4,7 @@ *** -?> **Tip** *If your M5Stack Core was not burnt with a specific firmware named `UiFlow` in advance, please visit this article [How to burn firmware](/en/related_documents/how_to_burn_firmware) for burnning)* +?> **Tip** *If your M5Stack Core was not burnt with a specific firmware named `UIFlow` in advance, please visit this article [How to burn firmware](/en/related_documents/how_to_burn_firmware) for burnning)* **After powering on Core and pressing the red button on the left hand side of the M5，you will be greeted by this screen. Let's connect to networkable AP.** @@ -48,7 +48,7 @@ ## Complete -Once you've reset M5Stack Core, pressed the upload buttom, you will arrive at a screen with a QR code. Now, you can try to program with your core following this article [Quick Start with UiFlow](/en/quick_start/m5core/m5stack_core_get_started_MicroPython) +Once you've reset M5Stack Core, pressed the upload buttom, you will arrive at a screen with a QR code. Now, you can try to program with your core following this article [Quick Start with UIFlow](/en/quick_start/m5core/m5stack_core_get_started_MicroPython)
diff --git a/docs/en/unit/396port.md b/docs/en/unit/396port.md index ee52c2cd..39b2e1be 100644 --- a/docs/en/unit/396port.md +++ b/docs/en/unit/396port.md @@ -13,7 +13,7 @@ ## Feature - VH3.96 interface -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Related Link diff --git a/docs/en/unit/adc.md b/docs/en/unit/adc.md index bcdb3736..f414fae8 100644 --- a/docs/en/unit/adc.md +++ b/docs/en/unit/adc.md @@ -16,7 +16,7 @@ - Bult in programmable gain amplifier, thereby collecting analog signals with smaller amplitudes - Gain = 1, 2, 4, OR 8 - Detect 0~12V voltage Input - + - Two Lego installation holes ## APPLICATION diff --git a/docs/en/unit/angle.md b/docs/en/unit/angle.md index 8fc9c4fb..72527a3b 100644 --- a/docs/en/unit/angle.md +++ b/docs/en/unit/angle.md @@ -13,7 +13,7 @@ angle. ## Feature -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Related Link diff --git a/docs/en/unit/button.md b/docs/en/unit/button.md index af8ffc28..4f5c0287 100644 --- a/docs/en/unit/button.md +++ b/docs/en/unit/button.md @@ -12,7 +12,7 @@ The Unit BUTTON is a sigle-button unit that can be detected whether the button p ## Feature -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Related Link diff --git a/docs/en/unit/color.md b/docs/en/unit/color.md index 15e54911..37789f7e 100644 --- a/docs/en/unit/color.md +++ b/docs/en/unit/color.md @@ -14,7 +14,7 @@ - High precision - Detection range: 0℃~80℃ -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## APPLICATION diff --git a/docs/en/unit/dac.md b/docs/en/unit/dac.md index e30d4888..5ca4b282 100644 --- a/docs/en/unit/dac.md +++ b/docs/en/unit/dac.md @@ -16,7 +16,7 @@ - Up to 12 bits of resolution - Output 0~3.3V voltage - + - Two Lego installation holes ## APPLICATION diff --git a/docs/en/unit/dual_button.md b/docs/en/unit/dual_button.md index a00e4417..74693ddc 100644 --- a/docs/en/unit/dual_button.md +++ b/docs/en/unit/dual_button.md @@ -12,7 +12,7 @@ This Unit is a dual-button unit that can be detected whether a single button pre ## Feature -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Related Link diff --git a/docs/en/unit/earth.md b/docs/en/unit/earth.md index 263d5d07..e3b66404 100644 --- a/docs/en/unit/earth.md +++ b/docs/en/unit/earth.md @@ -17,7 +17,7 @@ You can read the moisture in soil staright or get a digital signal(0/1) that mea - Adjustable threshold, including 10K adjustable resistor - Analog & Digital output -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Related Link diff --git a/docs/en/unit/env.md b/docs/en/unit/env.md index 76a29982..24493d14 100644 --- a/docs/en/unit/env.md +++ b/docs/en/unit/env.md @@ -24,7 +24,7 @@ temperature and humidity sensor and absolute barometric pressure sensor. Connect - Air pressure - measuring range: 300 ~ 1100hPa - resolution: ±1hPa -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Related Link diff --git a/docs/en/unit/extio.md b/docs/en/unit/extio.md index 91371daa..99c868b8 100644 --- a/docs/en/unit/extio.md +++ b/docs/en/unit/extio.md @@ -17,7 +17,7 @@ This unit connects to GRVOE A interface on M5Core, and it communicates with M5Co ## Feature - Expanded I/O number: 8 -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Related Link diff --git a/docs/en/unit/gps.md b/docs/en/unit/gps.md index cd912104..4859515d 100644 --- a/docs/en/unit/gps.md +++ b/docs/en/unit/gps.md @@ -19,7 +19,7 @@ - 15mA Ultra low power comsume - integrated radio frequency,base band, flash - working temperature:-40~85℃ - + - With two Lego plugin holes on the Unit, it could be more easier to compatable with Lego mountings ## Application diff --git a/docs/en/unit/hub.md b/docs/en/unit/hub.md index f9e3fde7..77cd0c2d 100644 --- a/docs/en/unit/hub.md +++ b/docs/en/unit/hub.md @@ -15,7 +15,7 @@ Core at a time. ## Feature - Instantly Add Three 4-Pins-GROVE ports to Any Compatible Device -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Related Link diff --git a/docs/en/unit/ir.md b/docs/en/unit/ir.md index 8015c8f5..15651c89 100644 --- a/docs/en/unit/ir.md +++ b/docs/en/unit/ir.md @@ -18,7 +18,7 @@ Because the GROVE interface has two signal pins, one controls infrared transmiss - A pair of infrared transmitting and receiving tube - Detects the distance 2 ~ 5cm -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Related Link diff --git a/docs/en/unit/joystick.md b/docs/en/unit/joystick.md index 994d2b9f..892f4ab9 100644 --- a/docs/en/unit/joystick.md +++ b/docs/en/unit/joystick.md @@ -18,7 +18,7 @@ The Joystick Unit is controlled by PORT A (I2C) after connected with the M5Core, - Output value of X, Y direction: 10 ~ 250 - Output value of Z direction is (0: released; 1: pressed) -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Related Link diff --git a/docs/en/unit/light.md b/docs/en/unit/light.md index 34881aa5..c5ea29d4 100644 --- a/docs/en/unit/light.md +++ b/docs/en/unit/light.md @@ -17,7 +17,7 @@ When light intensity is big enough, the unit will output hight level(digital sig - Adjustable threshold, including 10K adjustable resistor - Analog & Digital output -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Related Link diff --git a/docs/en/unit/makey.md b/docs/en/unit/makey.md index ba25fc68..37a0b876 100644 --- a/docs/en/unit/makey.md +++ b/docs/en/unit/makey.md @@ -25,7 +25,7 @@ unit通过GROVE线连接至m5core的接口A后，烧录[例程](https://github.c - Arduino Mega328p Controller - 16 Keys Fruit Piano(PD0-7 & PB0-5 & PC0,1), 1 NeoPixel pin(PC2) and 1 Buzzer pin(PC3) - Buzzer inside -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Application diff --git a/docs/en/unit/ncir.md b/docs/en/unit/ncir.md index 4306b2fb..13aceca2 100644 --- a/docs/en/unit/ncir.md +++ b/docs/en/unit/ncir.md @@ -16,7 +16,7 @@ The unit comunicates with M5Core with I2C. And It's I2C address is 0x5A. - High precision - Detection range: -70℃~382.2℃ -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## APPLICATION diff --git a/docs/en/unit/pir.md b/docs/en/unit/pir.md index 1580c397..be65047d 100644 --- a/docs/en/unit/pir.md +++ b/docs/en/unit/pir.md @@ -15,7 +15,7 @@ If PIR detect that infrared light has changed, the signal pin of PIR will output ## Feature - Detects the distance 150cm -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Related Link diff --git a/docs/en/unit/proto.md b/docs/en/unit/proto.md index c259987e..d889496c 100644 --- a/docs/en/unit/proto.md +++ b/docs/en/unit/proto.md @@ -15,7 +15,7 @@ that could controlled by M5GO Core as you like. - Flexible extended blank circle - 70 holes(pitch of holes: 100mil) -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Related Link diff --git a/docs/en/unit/relay.md b/docs/en/unit/relay.md index b871913b..82171653 100644 --- a/docs/en/unit/relay.md +++ b/docs/en/unit/relay.md @@ -15,7 +15,7 @@ Only a low electrial level is sent to this unit, the relay will be close and the ## Feature - A single input - Up to 3A @ 30 VDC or 220 VAC -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## APPLICATION diff --git a/docs/en/unit/rgb.md b/docs/en/unit/rgb.md index 91f9aac1..4d1712dd 100644 --- a/docs/en/unit/rgb.md +++ b/docs/en/unit/rgb.md @@ -16,7 +16,7 @@ Arduino or MicroPython. ## Feature -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Related Link diff --git a/docs/en/unit/rs485.md b/docs/en/unit/rs485.md index 0a9f5af5..ea64411e 100644 --- a/docs/en/unit/rs485.md +++ b/docs/en/unit/rs485.md @@ -16,7 +16,7 @@ - Built in MAX485/SP485EEN - Drive RS485 devices up to 12V -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Related Link diff --git a/docs/en/unit/thermal.md b/docs/en/unit/thermal.md index 79660e19..5444e036 100644 --- a/docs/en/unit/thermal.md +++ b/docs/en/unit/thermal.md @@ -18,7 +18,7 @@ The unit communicates with m5core through GROVE A(IIC). And IIC address is 0x33. - 32x24 piexls - Target temperature -40°C ~ 300°C -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## APPLICATION diff --git a/docs/en/unit/tof.md b/docs/en/unit/tof.md index 8a101d82..3cf61d12 100644 --- a/docs/en/unit/tof.md +++ b/docs/en/unit/tof.md @@ -17,7 +17,7 @@ The unit communicates with m5core through GROVE A(IIC). And the IIC address is 0 - High precision - Measure absolute distances up to 2m - the wavelength of laser: 940nm -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## APPLICATION diff --git a/docs/en/unit/trace.md b/docs/en/unit/trace.md index e36d33e8..e6d488c7 100644 --- a/docs/en/unit/trace.md +++ b/docs/en/unit/trace.md @@ -17,7 +17,7 @@ TRACE Unit also communicates with the master through the IIC ( the IIC address i ## Feature - operation range: The reflecting surface is less than 11mm from the photoelectric surface -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) ## Related Link diff --git a/docs/en/unit/weight.md b/docs/en/unit/weight.md index 5ae5493c..0c79765f 100644 --- a/docs/en/unit/weight.md +++ b/docs/en/unit/weight.md @@ -25,7 +25,7 @@ The unit is connected to the pressure sensor at one end and the M5Core is connec - Programmable magnification: 32, 64, 128 - ADC accuracy inside the HX711: 24 bits - Output voltage range: 0 ~ 5mV -- GROVE interface, support [UiFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) +- GROVE interface, support [UIFlow](http://flow.m5stack.com) and [Arduino](http://www.arduino.cc) - Two Lego installation holes ## Application diff --git a/docs/ja/core/basic.md b/docs/ja/core/basic.md index 7465edf3..15e5abd4 100644 --- a/docs/ja/core/basic.md +++ b/docs/ja/core/basic.md @@ -77,11 +77,15 @@ **メモ:** -*各コアの主な仕様は以下の表の通りです。更に詳細な情報が知りたい方は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_ja.md)から。* +*各コアの主な仕様は以下の表の通りです。* - +- *比較表の**チェック**は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - +- *比較表の**ダウンロード**は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* + + + + ## パッケージ内容 diff --git a/docs/ja/core/face_kit.md b/docs/ja/core/face_kit.md index 797b2423..4442f6af 100644 --- a/docs/ja/core/face_kit.md +++ b/docs/ja/core/face_kit.md @@ -58,6 +58,12 @@ ### ノート -*FACES Kitの中には[Gray](ja/core/gray)コアが同梱されています。FACESではその他のコアも利用可能です。各コアの主な仕様は以下の表の通りです。更に詳細な情報が知りたい方は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_ja.md)から。* +*FACES Kitの中には[Gray](ja/core/gray)コアが同梱されています。FACESではその他のコアも利用可能です。各コアの主な仕様は以下の表の通りです。* - +- *比較表の**チェック**は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* + +- *比較表の**ダウンロード**は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* + + + + diff --git a/docs/ja/core/fire.md b/docs/ja/core/fire.md index 504f065a..e2403fac 100644 --- a/docs/ja/core/fire.md +++ b/docs/ja/core/fire.md @@ -1,6 +1,6 @@ # M5Stack FIRE {docsify-ignore-all} -fire_01 +fire_01 * * * @@ -23,7 +23,7 @@ ## 特徴 - プログラミングサポート - - [UiFlow](http://flow.m5stack.com/) + - [UIFlow](http://flow.m5stack.com/) - [Arduino](http://www.arduino.cc) - [MicroPython](http://micropython.org/) - LEGO 互換ホール @@ -155,11 +155,15 @@ **メモ:** -*各コアの主な仕様は以下の表の通りです。更に詳細な情報が知りたい方は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_ja.md)から。* +*各コアの主な仕様は以下の表の通りです。* - +- *比較表の**チェック**は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - +- *比較表の**ダウンロード**は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* + + + + ## パッケージ内容 diff --git a/docs/ja/core/gray.md b/docs/ja/core/gray.md index c62a0d6a..7f19394b 100644 --- a/docs/ja/core/gray.md +++ b/docs/ja/core/gray.md @@ -8,19 +8,25 @@ ## 概要 -**M5Stack GRAY**は**ESP32**チップがベースです。**Blockly**、**Arduino**、**MicroPython**などでプログラミングすることができます。 +**M5Stack GRAY** は **ESP32** チップがベースです。 **Blockly**、**Arduino**、**MicroPython** などでプログラミングすることができます。 -**M5Stack GRAY**はESP32プログラミングに必要なものに加えて、**MPU9250**MEMSセンサー（3軸ジャイロ + 3軸加速度 + 3軸地磁気)、TFT LCDなどを備えています。簡易版"Leap Motion"のような3Dリモートジェスチャーコントローラなどを短時間で作ることが出来るでしょう。 +**M5Stack GRAY** はESP32プログラミングに必要なものに加えて、**MPU9250** MEMSセンサー（3軸ジャイロ + 3軸加速度 + 3軸地磁気)、TFT LCDなどを備えています。簡易版"Leap Motion"のような3Dリモートジェスチャーコントローラなどを短時間で作ることが出来るでしょう。 + + ボトムボードはDIY用のI2Sピン(GPIO0, GPIO12, GPIO13, GPIO15, GPIO34)の他に、M-Bus上のGPIOを拡張利用できるようにデザインされています。 + + ## 特徴 - プログラミングサポート - Arduino - ESP-IDF - MicroPython -- TFカード (サポート最大16GB) +- TFカード (サポート最大 16GB) + + ## ピンマップ @@ -154,11 +160,15 @@ **メモ:** -*各コアの主な仕様は以下の表の通りです。更に詳細な情報が知りたい方は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_ja.md)から。* +*各コアの主な仕様は以下の表の通りです。* - +- *比較表の**チェック**は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - +- *比較表の**ダウンロード**は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* + + + + ## パッケージ内容 @@ -167,9 +177,15 @@ - USB Type-C ケーブル - ユーザーマニュアル +gray_04 + + + + + ## ドキュメント -- **データシート** - [ESP32](https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_cn.pdf) - [MPU9250](https://www.invensense.com/wp-content/uploads/2015/02/PS-MPU-9250A-01-v1.1.pdf) +- **データシート** - [ESP32](https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf) - [MPU9250](https://www.invensense.com/wp-content/uploads/2015/02/PS-MPU-9250A-01-v1.1.pdf) ## 関連動画 diff --git a/docs/ja/core/m5go.md b/docs/ja/core/m5go.md index f9b74066..27528c0b 100644 --- a/docs/ja/core/m5go.md +++ b/docs/ja/core/m5go.md @@ -12,14 +12,14 @@ **M5GO IoT Starter Kit**は6つのユニット(ENV, IR, RGB, PIR, ANGLE, HUB)と1つの白いM5Core(ESP32ベース)からなる、IoTプログラミング学習キットです。 -[UiFlow](http://flow.m5stack.com)や**Arduino IDE**を使用してプログラミングすることができます。 +[UIFlow](http://flow.m5stack.com)や**Arduino IDE**を使用してプログラミングすることができます。 また私たちはIoTプログラミングトレーニングコースも提供しています。 興味がある方は、電子メールまでご連絡ください。 ## 特徴 - プログラミングサポート - - [UiFlow](http://flow.m5stack.com) + - [UIFlow](http://flow.m5stack.com) - Arduino - MicroPython - TFカード (サポート最大16GB) @@ -107,11 +107,15 @@ **メモ:** -*各コアの主な仕様は以下の表の通りです。更に詳細な情報が知りたい方は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_ja.md)から。* +*各コアの主な仕様は以下の表の通りです。* - +- *比較表の**チェック**は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - +- *比較表の**ダウンロード**は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* + + + + ## パッケージ内容 diff --git a/docs/ja/core/m5go_lite.md b/docs/ja/core/m5go_lite.md index fee76cc0..091f53fb 100644 --- a/docs/ja/core/m5go_lite.md +++ b/docs/ja/core/m5go_lite.md @@ -10,14 +10,14 @@ **M5GO Lite**は**ENV unit**と**M5Core White**のコンパクトなキットです。[M5GO IOT Starter Kit](ja/core/m5go_iot_starter_kit)のシンプルなバージョンです。 -M5GO Liteは[UiFlow](http://flow.m5stack.com)やArduino IDEを使用してプログラミングすることができます。 +M5GO Liteは[UIFlow](http://flow.m5stack.com)やArduino IDEを使用してプログラミングすることができます。 教育用のコースなども用意しています。興味がある方は、お気軽にこちらのメールアドレスへご連絡ください。 ## 特徴 - サポートする開発環境 - - [UiFlow](http://flow.m5stack.com/) + - [UIFlow](http://flow.m5stack.com/) - Arduino - MicroPython - TF Card サポート(最大16GB) @@ -105,11 +105,15 @@ M5GO Liteは[UiFlow](http://flow.m5stack.com)やArduino IDEを使用してプロ **メモ:** -*各コアの主な仕様は以下の表の通りです。更に詳細な情報が知りたい方は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_ja.md)から。* +*各コアの主な仕様は以下の表の通りです。* - +- *比較表の**チェック**は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - +- *比較表の**ダウンロード**は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* + + + + ## パッケージ内容 diff --git a/docs/ja/core/m5stick.md b/docs/ja/core/m5stick.md index 462f7b4f..b052dfa1 100644 --- a/docs/ja/core/m5stick.md +++ b/docs/ja/core/m5stick.md @@ -17,7 +17,7 @@ - サポートプログラミング - Arduino - - UiFlow (Blockly / MicroPython) + - UIFlow (Blockly / MicroPython) - ウェアラブル - MEMS IMU(MPU9250版のみ) @@ -58,11 +58,15 @@ **メモ:** -*各コアの主な仕様は以下の表の通りです。更に詳細な情報が知りたい方は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_ja.md)から。* +*各コアの主な仕様は以下の表の通りです。* - +- *比較表の**チェック**は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - +- *比較表の**ダウンロード**は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* + + + + ## パッケージ内容 diff --git a/docs/ja/core/white.md b/docs/ja/core/white.md index 9418b557..b1bb9c30 100644 --- a/docs/ja/core/white.md +++ b/docs/ja/core/white.md @@ -10,16 +10,20 @@ M5Coreの下のボトムボードには、I2Sピン(GPIO0, GPIO12, GPIO13, GPIO1 **メモ:** -*各コアの主な仕様は以下の表の通りです。更に詳細な情報が知りたい方は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_ja.md)から。* +*各コアの主な仕様は以下の表の通りです。* - +- *比較表の**チェック**は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/hardware_difference_between_cores_zh_CN.md)。* - +- *比較表の**ダウンロード**は[こちら](https://github.com/m5stack/M5-Schematic/blob/master/Core/M5%20Core%20Detailed%20Comparison.xlsx)。* + + + + ## 特徴 - プログラミングサポート - - UiFlow + - UIFlow - MicroPython - Arduino - LEGO 互換ホール diff --git a/docs/ja/faq.md b/docs/ja/faq.md index 6041bfd7..6abfa060 100644 --- a/docs/ja/faq.md +++ b/docs/ja/faq.md @@ -11,10 +11,10 @@ - Q. ArduinoでI2Cがうまく動きません。 - A. Arduino IDEのボードマネージャから最新のesp32ライブラリ(>=1.0.1)を導入してください。 - + --- -- Q. UiFlowのソースは公開されていますか？ +- Q. UIFlowのソースは公開されていますか？ - A. 現在公開はされていません。もしかしたら将来公開されるかもしれません。 --- diff --git a/docs/ja/module/servo.md b/docs/ja/module/servo.md index 590a8652..6598610f 100644 --- a/docs/ja/module/servo.md +++ b/docs/ja/module/servo.md @@ -8,9 +8,9 @@ ## 概要 -**SERVO**モジュールは、12WAYのサーボモータを同時に駆動できるサーボモータドライバモジュールです。(現在、最大電流の制限により、駆動できるサーボモータの最大数は9です。すぐにアップグレード版を公開します。） +**SERVO** モジュールは、12WAYのサーボモータを同時に駆動できるサーボモータドライバモジュールです。(現在、最大電流の制限により、駆動できるサーボモータの最大数は9です。すぐにアップグレード版を公開します。） -サーボモータをコントロールするのはとても簡単です。Arduino IDEで2〜3行のコードを書くか、UiFlowで2-3ブロックをドラッグ&ドロップするだけで、一度に多くのサーボモータを駆動できます。 +サーボモータをコントロールするのはとても簡単です。Arduino IDEで2〜3行のコードを書くか、UIFlowで2-3ブロックをドラッグ&ドロップするだけで、一度に多くのサーボモータを駆動できます。 サーボはGROVEインタフェース（I2C）を介してM5Coreと通信します。 I2Cアドレスは0x53です。 @@ -18,7 +18,7 @@ - 12サーボモータ同時駆動可能 - 電源範囲：6-12V -- [Arduino](http://www.arduino.cc/), [UiFlow](http://flow.m5stack.com/)をサポート +- [Arduino](http://www.arduino.cc/), [UIFlow](http://flow.m5stack.com/)をサポート ## パッケージ内容 @@ -105,7 +105,7 @@ void loop() { **チュートリアル** - + **SERVO ケース** diff --git a/docs/ja/qs.md b/docs/ja/qs.md index 5dfe0863..9e525fc4 100644 --- a/docs/ja/qs.md +++ b/docs/ja/qs.md @@ -44,7 +44,7 @@ M5Stackを使った開発に必要なもの: | | ---|---|--- -[Arduino](/ja/practice/practice_arduino) | [UiFlow-Blockly](/ja/practice/practice_blockly) | [UiFlow-MicroPython](/ja/practice/practice_micropython) --> +[Arduino](/ja/practice/practice_arduino) | [UIFlow-Blockly](/ja/practice/practice_blockly) | [UIFlow-MicroPython](/ja/practice/practice_micropython) --> + - LEGO 互換ホール ## アプリケーション diff --git a/docs/ja/unit/angle.md b/docs/ja/unit/angle.md index 9f53b6fd..7d0ebcea 100644 --- a/docs/ja/unit/angle.md +++ b/docs/ja/unit/angle.md @@ -12,7 +12,7 @@ ## 特徴 -- サポート[UiFlow](http://flow.m5stack.com)プログラミング, [Arduino](http://www.arduino.cc)プログラミング +- サポート[UIFlow](http://flow.m5stack.com)プログラミング, [Arduino](http://www.arduino.cc)プログラミング - LEGO 互換ホール ## サンプルコード diff --git a/docs/ja/unit/earth.md b/docs/ja/unit/earth.md index cc96e237..f74b047c 100644 --- a/docs/ja/unit/earth.md +++ b/docs/ja/unit/earth.md @@ -18,7 +18,7 @@ - 10KΩ調整抵抗による閾値調整可能 - アナログ & デジタル出力 - Grove インターフェース -- [UiFlow](http://flow.m5stack.com)、[Arduino](http://www.arduino.cc)をサポート +- [UIFlow](http://flow.m5stack.com)、[Arduino](http://www.arduino.cc)をサポート - LEGO 互換ホール ## サンプルコード diff --git a/docs/ja/unit/env.md b/docs/ja/unit/env.md index 0459f9f3..8808d671 100644 --- a/docs/ja/unit/env.md +++ b/docs/ja/unit/env.md @@ -21,7 +21,7 @@ - 気圧: - 計測範囲: 300 ~ 1100hPa - 精度: ±1hPa -- サポート[UiFlow](http://flow.m5stack.com)プログラミング, [Arduino](http://www.arduino.cc)プログラミング +- サポート[UIFlow](http://flow.m5stack.com)プログラミング, [Arduino](http://www.arduino.cc)プログラミング - LEGO 互換ホール ## 関連リンク diff --git a/docs/ja/unit/extio.md b/docs/ja/unit/extio.md index e46a096f..f78f3932 100644 --- a/docs/ja/unit/extio.md +++ b/docs/ja/unit/extio.md @@ -17,7 +17,7 @@ ## 特徴 - I/O拡張数: 8 -- GROVEインターフェース、[UiFlow](http://flow.m5stack.com)と[Arduino](http://www.arduino.cc)をサポート +- GROVEインターフェース、[UIFlow](http://flow.m5stack.com)と[Arduino](http://www.arduino.cc)をサポート - LEGO互換の穴 ## 関連リンク diff --git a/docs/ja/unit/gps.md b/docs/ja/unit/gps.md index 37032df5..d7225904 100644 --- a/docs/ja/unit/gps.md +++ b/docs/ja/unit/gps.md @@ -19,7 +19,7 @@ - 15mA 超低消費 - 内蔵RF, base band, flash - 動作温度:-40~85℃ - + - LEGO互換ホール ## アプリケーション diff --git a/docs/ja/unit/ir.md b/docs/ja/unit/ir.md index 96666357..764363ae 100644 --- a/docs/ja/unit/ir.md +++ b/docs/ja/unit/ir.md @@ -16,7 +16,7 @@ GROVEインターフェースには2つの信号ピンが存在し、1つは受 - IR送受信機 - 検出距離 2 ~ 5cm -- サポート[UiFlow](http://flow.m5stack.com)プログラミング, [Arduino](http://www.arduino.cc)プログラミング +- サポート[UIFlow](http://flow.m5stack.com)プログラミング, [Arduino](http://www.arduino.cc)プログラミング - LEGO 互換ホール ## 関連リンク diff --git a/docs/ja/unit/makey.md b/docs/ja/unit/makey.md index cdf435b1..59f1ea76 100644 --- a/docs/ja/unit/makey.md +++ b/docs/ja/unit/makey.md @@ -18,7 +18,7 @@ - 1x Buzzer pin(PC3) - ブザー内蔵 - Grove インターフェース -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - LEGO 互換ホール ## アプリケーション diff --git a/docs/ja/unit/ncir.md b/docs/ja/unit/ncir.md index 6df5d466..9a2ed768 100644 --- a/docs/ja/unit/ncir.md +++ b/docs/ja/unit/ncir.md @@ -16,7 +16,7 @@ - 高精度 - 検出範囲: -70℃~382.2℃ -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - LEGO 互換ホール ## アプリケーション diff --git a/docs/ja/unit/neopixel.md b/docs/ja/unit/neopixel.md index 90bde375..13735940 100644 --- a/docs/ja/unit/neopixel.md +++ b/docs/ja/unit/neopixel.md @@ -18,7 +18,7 @@ - 測定可能距離: 10cm/20cm/0.5m/1m/2m - Grove インターフェース -- [UiFlow](http://flow.m5stack.com/), [Arduino](http://www.arduino.cc)をサポート +- [UIFlow](http://flow.m5stack.com/), [Arduino](http://www.arduino.cc)をサポート - LEGO 互換ホール ## 関連リンク diff --git a/docs/ja/unit/pir.md b/docs/ja/unit/pir.md index 36f8001a..0bb739dd 100644 --- a/docs/ja/unit/pir.md +++ b/docs/ja/unit/pir.md @@ -13,7 +13,7 @@ ## 特徴 - 測定可能距離 150cm -- サポート[UiFlow](http://flow.m5stack.com)プログラミング, [Arduino](http://www.arduino.cc)プログラミング +- サポート[UIFlow](http://flow.m5stack.com)プログラミング, [Arduino](http://www.arduino.cc)プログラミング - LEGO 互換ホール ## サンプルコード diff --git a/docs/ja/unit/relay.md b/docs/ja/unit/relay.md index cbf2f8b8..46e209c1 100644 --- a/docs/ja/unit/relay.md +++ b/docs/ja/unit/relay.md @@ -15,7 +15,7 @@ - シングル入力 - 最大 3A @ 30 VDC または 220 VAC - Grove インターフェース -- [UiFlow](http://flow.m5stack.com), [Arduino](http://www.arduino.cc)をサポート +- [UIFlow](http://flow.m5stack.com), [Arduino](http://www.arduino.cc)をサポート - LEGO 互換ホール ## アプリケーション @@ -75,6 +75,6 @@ void loop(void) { ## 関連動画 -**UiFlow チュートリアル** +**UIFlow チュートリアル** \ No newline at end of file diff --git a/docs/ja/unit/rgb.md b/docs/ja/unit/rgb.md index 856cacaa..ac437127 100644 --- a/docs/ja/unit/rgb.md +++ b/docs/ja/unit/rgb.md @@ -15,7 +15,7 @@ ## 特徴 - 3x フルカラーLED -- サポート[UiFlow](http://flow.m5stack.com)プログラミング, [Arduino](http://www.arduino.cc)プログラミング +- サポート[UIFlow](http://flow.m5stack.com)プログラミング, [Arduino](http://www.arduino.cc)プログラミング - LEGO 互換ホール ## サンプルコード diff --git a/docs/ja/unit/rs485.md b/docs/ja/unit/rs485.md index dbf00333..d186bc6d 100644 --- a/docs/ja/unit/rs485.md +++ b/docs/ja/unit/rs485.md @@ -16,7 +16,7 @@ - MAX485/SP485EEN内蔵 - 12VまでのRS485デバイス制御 -- GROVEインターフェース、[UiFlow](http://flow.m5stack.com)と[Arduino](http://www.arduino.cc)をサポート +- GROVEインターフェース、[UIFlow](http://flow.m5stack.com)と[Arduino](http://www.arduino.cc)をサポート - ２つのLEGO互換ホール ## 関連リンク diff --git a/docs/ja/unit/trace.md b/docs/ja/unit/trace.md index cc552bc8..b471df0e 100644 --- a/docs/ja/unit/trace.md +++ b/docs/ja/unit/trace.md @@ -17,7 +17,7 @@ M5CoreとはGROVE Aで接続します。I2C通信でコントロール可能で ## 特徴 - 動作範囲: センサ-反射面の距離が11mm以内 -- GROVE インターフェース, [UiFlow](http://flow.m5stack.com) と [Arduino](http://www.arduino.cc)をサポート +- GROVE インターフェース, [UIFlow](http://flow.m5stack.com) と [Arduino](http://www.arduino.cc)をサポート ## 関連リンク diff --git a/docs/ja/unit/weight.md b/docs/ja/unit/weight.md index 11fcb0b2..49a85896 100644 --- a/docs/ja/unit/weight.md +++ b/docs/ja/unit/weight.md @@ -23,7 +23,7 @@ - プログラム可能なズーム倍率：32, 64, 128 - HX711内部ADC精度：24 bit - Unit出力電圧範囲：0 ~ 5mV -- GROVE インターフェース、 [UiFlow](http://flow.m5stack.com)と[Arduino](http://www.arduino.cc)をサポート +- GROVE インターフェース、 [UIFlow](http://flow.m5stack.com)と[Arduino](http://www.arduino.cc)をサポート - 2つのLEGO 互換ホール ## アプリケーション diff --git a/docs/zh_CN/core/basic.md b/docs/zh_CN/core/basic.md index 7de9b174..03e07d17 100644 --- a/docs/zh_CN/core/basic.md +++ b/docs/zh_CN/core/basic.md @@ -10,7 +10,7 @@ ## 描述 -**M5Core BASIC** 是一款基于 **ESP32** 芯片(集成 Wi-Fi 和蓝牙)的基础版开发板，包括黑色的主板和[底座](zh_CN/base/core_bottom)。你可以用 [UiFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/) 或 [Arduino](http://www.arduino.cc) 来编程它. +**M5Core BASIC** 是一款基于 **ESP32** 芯片(集成 Wi-Fi 和蓝牙)的基础版开发板，包括黑色的主板和[底座](zh_CN/base/core_bottom)。你可以用 [UIFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/) 或 [Arduino](http://www.arduino.cc) 来编程它. 这个黑色主板包含 3 个按键、喇叭、LCD (320x240)、 TF 卡插槽。底座的设计用于拓展 M-Bus 总线的Pin 管脚出来，以方便 DIY 和产品设计，每个 Pin 脚都引出来做成了排针或排母形式，非常方便 (GPIO0, GPIO12, GPIO13, GPIO15, GPIO34 这几个关于 I2S 功能的引脚没引出)。 @@ -22,7 +22,7 @@ ## 特性 -- 可编程，支持 [UiFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/) 和 [Arduino](http://www.arduino.cc) +- 可编程，支持 [UIFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/) 和 [Arduino](http://www.arduino.cc) - 支持外置 TF 卡(最大 16G) ## 外设的管脚映射 diff --git a/docs/zh_CN/core/fire.md b/docs/zh_CN/core/fire.md index 2f9b5e64..81aece96 100644 --- a/docs/zh_CN/core/fire.md +++ b/docs/zh_CN/core/fire.md @@ -1,6 +1,6 @@ # M5Stack FIRE {docsify-ignore-all} -fire_01 +fire_01 * * * @@ -8,7 +8,7 @@ ## 描述 -**FIRE** 是一款基于 **ESP32** 芯片(集成 Wi-Fi 和蓝牙)的升级版开发板，包括红色的主板、M5GO 底座和 M5GO 充电底座。你可以用 [UiFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/) 或 [Arduino](http://www.arduino.cc) 来编程它. 这个红色主板包含 3 个按键、喇叭、LCD(320x240)、TF 卡插槽、**MPU9250**。 +**FIRE** 是一款基于 **ESP32** 芯片(集成 Wi-Fi 和蓝牙)的升级版开发板，包括红色的主板、M5GO 底座和 M5GO 充电底座。你可以用 [UIFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/) 或 [Arduino](http://www.arduino.cc) 来编程它. 这个红色主板包含 3 个按键、喇叭、LCD(320x240)、TF 卡插槽、**MPU9250**。 [M5GO 底座](zh_CN/base/m5go_bottom)内置 PORT B, PORT C, 2 个 RGBLed 灯条 (SK6812), 一个麦克风和一个电池 (550mAh)。 @@ -20,7 +20,7 @@ ## 特性 -- 可编程，支持[UiFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/)或[Arduino](http://www.arduino.cc) +- 可编程，支持[UIFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/)或[Arduino](http://www.arduino.cc) - 支持外置 TF 卡(最大 16G) - 支持 LEGO 件 diff --git a/docs/zh_CN/core/gray.md b/docs/zh_CN/core/gray.md index d9bde067..62e8b880 100644 --- a/docs/zh_CN/core/gray.md +++ b/docs/zh_CN/core/gray.md @@ -1,6 +1,6 @@ # 灰色升级版M5Core {docsify-ignore-all} -gray_02 gray_02 gray_04 +gray_02gray_02 @@ -10,24 +10,30 @@ ## 描述 -**M5Core GRAY**是一款基于**ESP32**芯片(集成Wi-Fi和蓝牙)的灰色开发板，内置MEMS传感器(**MPU9250**)。你可以用[UiFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/)和[Arduino](http://www.arduino.cc)来编程它. +**M5Core GRAY** 是一款基于 **ESP32** 芯片(集成Wi-Fi和蓝牙)的灰色开发板，内置MEMS传感器 ( **MPU9250** )。你可以用 [UIFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/) 和 [Arduino](http://www.arduino.cc) 来编程它. -这个灰色主板包含3个按键、喇叭、LCD(320x240)、TF卡插槽、九轴陀螺仪MPU9250。 +这个灰色主板包含 3 个按键、喇叭、LCD ( 320 x 240 )、TF 卡插槽、九轴陀螺仪 MPU9250。 -[底座](zh_CN/base/core_bottom)的设计用于拓展M-Bus总线的Pin管脚出来，以方便DIY和产品设计，每个Pin脚都引出来做成了排针或排母形式，非常方便(GPIO0, GPIO12, GPIO13, GPIO15, GPIO34这几个关于I2S功能的引脚没引出)。 + +[底座](zh_CN/base/core_bottom)的设计用于拓展 M-Bus 总线的 Pin 管脚出来，以方便DIY和产品设计，每个 Pin 脚都引出来做成了排针或排母形式，非常方便 (GPIO0, GPIO12, GPIO13, GPIO15, GPIO34 这几个关于 I2S 功能的引脚没引出)。 + + ## 特性 -- 可编程，支持[UiFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/)和[Arduino](http://www.arduino.cc) -- 支持外置TF卡(最大16G) +- 可编程，支持 [UIFlow](http://flow.m5stack.com), [MicroPython](http://micropython.org/) 和 [Arduino](http://www.arduino.cc) +- 支持外置 TF 卡 ( 最大 16G ) + + ## 外设的管脚映射 -**LCD屏幕&TF卡** +**LCD 屏幕 & TF 卡** -*LCD像素：320x240* -*TF卡最大支持16GB* +*LCD 像素：320 x 240* + +*TF 卡最大支持 16GB* @@ -36,7 +42,7 @@
ESP32 ChipGPIO23GPIO19GPIO18GPIO14GPIO27GPIO33GPIO32GPIO4
-**按键&喇叭** +**按键 & 喇叭** @@ -44,16 +50,16 @@
ESP32 ChipGPIO39GPIO38GPIO37GPIO25
喇叭 喇叭引脚
-**GROVE接口A** +**GROVE 接口 A**
ESP32 ChipGPIO22GPIO215VGND
GROVE ASCLSDA5VGND
-**九轴姿态传感器MPU9250** +**九轴姿态传感器 MPU9250** -*I2C地址为0x68* +*I2C 地址为 0x68* @@ -132,9 +138,9 @@ - Type-C USB 线 - 说明书 - +gray_04 - + diff --git a/docs/zh_CN/core/m5go.md b/docs/zh_CN/core/m5go.md index f5e7c2ff..febb4456 100644 --- a/docs/zh_CN/core/m5go.md +++ b/docs/zh_CN/core/m5go.md @@ -12,7 +12,7 @@ **M5GO IOT Starter Kit** 是一款以白色 M5Core 主控为核心，附带 6个units(ENV, IR, RGB, PIR, ANGLE, HUB) 和 [M5GO 底座](zh_CN/base/m5go_bottom)的物联网开发套件。 -你可以用 [UiFlow](http://flow.m5stack.com) 或 Arduino IDE 对它编程。 +你可以用 [UIFlow](http://flow.m5stack.com) 或 Arduino IDE 对它编程。 我们也提供了一些物联网开发课程方便你更快上手使用，如果你对这个感兴趣的话，欢迎给我司发邮件 。 @@ -22,7 +22,7 @@ ## 特性 -- 可编程，支持 [UiFlow](http://flow.m5stack.com), MicroPython 和 Arduino +- 可编程，支持 [UIFlow](http://flow.m5stack.com), MicroPython 和 Arduino - 支持外置TF卡 (最大16G) ## 外设的管脚映射 diff --git a/docs/zh_CN/core/m5go_lite.md b/docs/zh_CN/core/m5go_lite.md index 0e893f16..af59cda0 100644 --- a/docs/zh_CN/core/m5go_lite.md +++ b/docs/zh_CN/core/m5go_lite.md @@ -15,13 +15,13 @@ **M5GO Lite** 是一款以白色 M5Core 主控为核心，附带1个 **ENV unit** 和 [M5GO 底座](zh_CN/base/m5go_bottom)的物联网开发套件。它是 [M5GO IOT Starter Kit](zh_CN/core/m5go_iot_starter_kit) 的简单版本。 -你可以用 [UiFlow](http://flow.m5stack.com) 或 Arduino IDE 对它编程。 +你可以用 [UIFlow](http://flow.m5stack.com) 或 Arduino IDE 对它编程。 我们也提供了一些物联网开发课程方便你更快上手使用，如果你对这个感兴趣的话，欢迎给我司发邮件。 ## 特性 -- 可编程，支持 [UiFlow](http://flow.m5stack.com) , MicroPython 和 Arduino +- 可编程，支持 [UIFlow](http://flow.m5stack.com) , MicroPython 和 Arduino - 支持外置 TF 卡 ( 最大 16G ) ## 外设的管脚映射 diff --git a/docs/zh_CN/core/m5stick.md b/docs/zh_CN/core/m5stick.md index 0550fb67..ff5a8b9e 100644 --- a/docs/zh_CN/core/m5stick.md +++ b/docs/zh_CN/core/m5stick.md @@ -17,7 +17,7 @@ M5Stick有两个版本，白色外壳是无 MPU9250 的版本，灰色外壳是 ## 特性 -- 支持可编程操作: Arduino, UiFlow(Blockly, MicroPython) +- 支持可编程操作: Arduino, UIFlow(Blockly, MicroPython) - 编程板可穿戴 - 灰色版本：MEMS(MPU9250) diff --git a/docs/zh_CN/module/gps.md b/docs/zh_CN/module/gps.md index 6d8ee80f..9c9c48ec 100644 --- a/docs/zh_CN/module/gps.md +++ b/docs/zh_CN/module/gps.md @@ -8,7 +8,7 @@ ## 描述 -GPS 模块是一款内置了GPS小模组的M5Stack系列可堆叠模块。内置的GPS小模块名字为UBLOX NEO-M8N。堆叠了M5Core之后，你可以用UiFlow、Arduino和MicroPython来编程它。它都可提供全球定位信息，即使你在室外的任何地方。模块上电之后，就会一直接收定位信息。M5Core烧录[例程](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Module/GPS/Arduino)，堆叠了GPS模块和连接PC串口之后，屏幕和PC的串口显示终端就会打印GPS接收到的信息。 +GPS 模块是一款内置了GPS小模组的M5Stack系列可堆叠模块。内置的GPS小模块名字为UBLOX NEO-M8N。堆叠了M5Core之后，你可以用UIFlow、Arduino和MicroPython来编程它。它都可提供全球定位信息，即使你在室外的任何地方。模块上电之后，就会一直接收定位信息。M5Core烧录[例程](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Module/GPS/Arduino)，堆叠了GPS模块和连接PC串口之后，屏幕和PC的串口显示终端就会打印GPS接收到的信息。 GPS Module内部默认是通过UART2(GPIO16, GPIO17)与M5Core通讯，你可以通过修改0欧姆电阻跳线修改。 diff --git a/docs/zh_CN/module/lora.md b/docs/zh_CN/module/lora.md index 62fa0128..49796256 100644 --- a/docs/zh_CN/module/lora.md +++ b/docs/zh_CN/module/lora.md @@ -8,7 +8,7 @@ ## 描述 -LoRa是内置了Ra-02小模组的LoRa模块。堆叠了M5Core之后，你可以用UiFlow、Arduino和MicroPython来编程它。 +LoRa是内置了Ra-02小模组的LoRa模块。堆叠了M5Core之后，你可以用UIFlow、Arduino和MicroPython来编程它。 M5Stack LoRa模块适用于长距离通信，结合多个LoRa模块，能组成长达1-2公里的物联网低功耗通信网络。它克服了传统物联网通信中长距离可是高功耗的难点。与蓝牙WIFI等通信技术相互弥补。 diff --git a/docs/zh_CN/module/servo.md b/docs/zh_CN/module/servo.md index 5bd0fbe6..b670ce84 100644 --- a/docs/zh_CN/module/servo.md +++ b/docs/zh_CN/module/servo.md @@ -8,15 +8,15 @@ ## 描述 -Servo是一个普通舵机(比如常见的9g舵机)驱动模块，它理论上可以同时驱动12路舵机。可是实际测试中，同时带动12路舵机时，电流很大，所以这个模块暂时能同时驱动9路舵机。过段时间，我们会推出改进升级版本，敬请期待。 +**Servo** 是一个普通舵机(比如常见的9g舵机)驱动模块，它理论上可以同时驱动12路舵机。可是实际测试中，同时带动12路舵机时，电流很大，所以这个模块暂时能同时驱动9路舵机。过段时间，我们会推出改进升级版本，敬请期待。 -Servo模块使用起来非常简单，因为内置了MEGA328芯片来管理多路舵机，所以使用的时候，只需要M5Core与Servo模块堆叠之后，通过GRVOE接口(I2C)通信(I2C地址是0x53)。编程时，在Arduino IDE环境下，也只需2-3行即可驱动。而且还支持UiFlow编程，只需要拖拽代码块即可使用。 +Servo模块使用起来非常简单，因为内置了MEGA328芯片来管理多路舵机，所以使用的时候，只需要M5Core与Servo模块堆叠之后，通过GRVOE接口(I2C)通信(I2C地址是0x53)。编程时，在Arduino IDE环境下，也只需2-3行即可驱动。而且还支持UIFlow编程，只需要拖拽代码块即可使用。 ## 特性 - 支持同时控制多路舵机 - 支持6-24V的宽电压范围输入 -- 支持Arduino和UiFlow编程，非常简单 +- 支持Arduino和UIFlow编程，非常简单 ## 包含 @@ -101,6 +101,10 @@ void loop() { ## 相关视频 +**SERVO 的使用教程** + + + **SERVO 的案例** \ No newline at end of file diff --git a/docs/zh_CN/qs.md b/docs/zh_CN/qs.md index 3723e9c4..7e17e67b 100644 --- a/docs/zh_CN/qs.md +++ b/docs/zh_CN/qs.md @@ -12,4 +12,4 @@ | | ---|---|--- -[Arduino](/zh_CN/practice\practice_arduino) | [UiFlow-Blockly](/zh_CN/practice\practice_blockly) | [UiFlow-MicroPython](/zh_CN/practice\practice_micropython) --> +[Arduino](/zh_CN/practice\practice_arduino) | [UIFlow-Blockly](/zh_CN/practice\practice_blockly) | [UIFlow-MicroPython](/zh_CN/practice\practice_micropython) --> diff --git a/docs/zh_CN/quick_start/bala/bala_quick_start.md b/docs/zh_CN/quick_start/bala/bala_quick_start.md index 6275f169..f5c7f9b7 100644 --- a/docs/zh_CN/quick_start/bala/bala_quick_start.md +++ b/docs/zh_CN/quick_start/bala/bala_quick_start.md @@ -10,12 +10,12 @@ ## 开发环境 -1. [UiFlow编辑](#UiFlow编辑) +1. [UIFlow编辑](#UIFlow编辑) 2. [Arduino IDE编辑](#Arduino-IDE编辑) ## UIFlow编辑 -1. 烧录UiFlow的固件 - [如何通过M5Burner烧录固件](/zh_CN/related_documents/how_to_burn_firmware) +1. 烧录UIFlow的固件 - [如何通过M5Burner烧录固件](/zh_CN/related_documents/how_to_burn_firmware) 2. WiFi链接 - [如何使用M5Core连接可联网的WiFi热点](/zh_CN/related_documents/how_to_connect_wifi_using_core) 3. 检查弹簧针POGO Pin的位置，并将M5Core堆叠在M5Bala上
@@ -35,7 +35,7 @@
-6. 转到[UiFlow](http://flow.m5stack.com/)网站并将模式从Blockly切换到Python +6. 转到[UIFlow](http://flow.m5stack.com/)网站并将模式从Blockly切换到Python
diff --git a/docs/zh_CN/quick_start/m5core/m5stack_core_get_started_MicroPython.md b/docs/zh_CN/quick_start/m5core/m5stack_core_get_started_MicroPython.md index b519e0bd..d08ac524 100644 --- a/docs/zh_CN/quick_start/m5core/m5stack_core_get_started_MicroPython.md +++ b/docs/zh_CN/quick_start/m5core/m5stack_core_get_started_MicroPython.md @@ -1,10 +1,10 @@ -# UiFlow 上手指南(Blockly/MicroPython) {docsify-ignore-all} +# UIFlow 上手指南(Blockly/MicroPython) {docsify-ignore-all} :clapper: **[相关视频](#相关视频)** -?> a. 如果你的设备还没烧录UiFlow固件的话，请参考这篇文档[如果使用M5Burner烧录固件](/zh_CN/related_documents/how_to_burn_firmware). b. 如果你是第一次使用这个Core或者想Core连接其他可联网的热点AP的话，请参考这篇文档[如果使用Core连接WIFI和UiFlow](/zh_CN/related_documents/how_to_connect_wifi_using_core)。 +?> a. 如果您的设备还没烧录UIFlow固件的话，请参考这篇文档[如果使用M5Burner烧录固件](/zh_CN/related_documents/how_to_burn_firmware). b. 如果您是第一次使用这个Core或者想Core连接其他可联网的热点AP的话，请参考这篇文档[如果使用Core连接WIFI和UIFlow](/zh_CN/related_documents/how_to_connect_wifi_using_core)。 -这时候，你的M5Core已经连接到了可联网WIFI热点，如果按下Core上左边的按键`UPLOAD`的话，会如下图显示。如果M5Core开机之后，两三秒内没做操作的话，会自动地显示预置的程序界面。所以最好开机之后，立马按下`upload`按键。 +这时候，您的M5Core已经连接到了可联网WIFI热点，如果按下Core上左边的按键`UPLOAD`的话，会如下图显示。如果M5Core开机之后，两三秒内没做操作的话，会自动地显示预置的程序界面。所以最好开机之后，立马按下`upload`按键。
@@ -13,28 +13,28 @@ ## 目录 -1. [连接到UiFlow](#连接到UiFlow) +1. [连接到UIFlow](#连接到UIFlow) 2. [编程Core](#编程Core) 3. [音乐例程](#音乐例程) -## 连接到UiFlow +## 连接到UIFlow -1. 现在用手机或者平板扫描M5Core上的二维码，或者你使用PC编程的话，在PC的浏览器上输入网址`flow.m5stack.com`。 +1. 现在用手机或者平板扫描M5Core上的二维码，或者您使用PC编程的话，在PC的浏览器上输入网址`flow.m5stack.com`。
-2. 因为每次上传代码到M5Core之前都要确保UiFlow正与手上的M5Core连接，而不是其他M5Core，所以需要点击UiFlow IDE页面右上角的齿轮，并在弹出的对话框内输入手上M5Core屏幕上显示的`APIKEY`，最后点击保存。 +2. 因为每次上传代码到M5Core之前都要确保UIFlow正与手上的M5Core连接，而不是其他M5Core，所以需要点击UIFlow IDE页面右上角的齿轮，并在弹出的对话框内输入手上M5Core屏幕上显示的`APIKEY`，最后点击保存。
-然后UiFlow就会连接到M5Core，此时M5Core屏幕右上角的小圆点就会变成绿色，不然会是一直红色。 +然后UIFlow就会连接到M5Core，此时M5Core屏幕右上角的小圆点就会变成绿色，不然会是一直红色。 现在，可以继续下面的步骤，开始M5Core编程啦！ @@ -42,7 +42,7 @@ ### a. 画一个UI -拖拽UiFlow IDE左上角的4种控件到`M5Stack Core`的UI界面，并点击页面右上角的`Run`按钮，执行效果。 +拖拽UIFlow IDE左上角的4种控件到`M5Stack Core`的UI界面，并点击页面右上角的`Run`按钮，执行效果。
@@ -104,8 +104,8 @@ lcd.print("Hello M5Stack") **UIFlow的快速指南(Mac&Linux)** - + ## 最后 -?> *如果你想了解更多UiFlow方面的编程的话，可以给我们发邮件，报名我们的课程.* +?> *如果您想了解学习UIFlow方面的编程的话，阅读 [UIFlow 的教程文档](https://m5stack.github.io/UIFlow_doc/cn/index.html).* diff --git a/docs/zh_CN/quick_start/m5core/m5stack_core_quick_start.md b/docs/zh_CN/quick_start/m5core/m5stack_core_quick_start.md index 314ba56d..ee79cda7 100644 --- a/docs/zh_CN/quick_start/m5core/m5stack_core_quick_start.md +++ b/docs/zh_CN/quick_start/m5core/m5stack_core_quick_start.md @@ -2,8 +2,8 @@ ## 选择你需要的编程语言 -*使用Arduino/C++编程的话，选择MacOS/Windows；使用Blockly/MicroPython，选择UiFlow(Blockly/MicroPython)* +*使用Arduino/C++编程的话，选择MacOS/Windows；使用Blockly/MicroPython，选择UIFlow(Blockly/MicroPython)* | | ---|---|--- -[Arduino-MacOS](zh_CN/quick_start/m5core/m5stack_core_get_started_Arduino_MacOS) | [Arduino-Windows](zh_CN/quick_start/m5core/m5stack_core_get_started_Arduino_Windows) | [UiFlow](zh_CN/quick_start/m5core/m5stack_core_get_started_MicroPython) \ No newline at end of file +[Arduino-MacOS](zh_CN/quick_start/m5core/m5stack_core_get_started_Arduino_MacOS) | [Arduino-Windows](zh_CN/quick_start/m5core/m5stack_core_get_started_Arduino_Windows) | [UIFlow](zh_CN/quick_start/m5core/m5stack_core_get_started_MicroPython) \ No newline at end of file diff --git a/docs/zh_CN/quick_start/m5stick/m5stick_quick_start.md b/docs/zh_CN/quick_start/m5stick/m5stick_quick_start.md index 10745947..4d49ebc4 100644 --- a/docs/zh_CN/quick_start/m5stick/m5stick_quick_start.md +++ b/docs/zh_CN/quick_start/m5stick/m5stick_quick_start.md @@ -2,13 +2,13 @@ ## 选择你需要的编程语言 -*使用Arduino/C++编程的话，选择Arduino；使用Blockly/MicroPython，选择UiFlow(Blockly/MicroPython)* +*使用Arduino/C++编程的话，选择Arduino；使用Blockly/MicroPython，选择UIFlow(Blockly/MicroPython)* - + | | ---|---|--- -[Arduino-MacOS](zh_CN/quick_start/m5stick/m5stick_quick_start_with_arduino_MacOS) | [Arduino-Windows](zh_CN/quick_start/m5stick/m5stick_quick_start_with_arduino_Windows) | [UiFlow](zh_CN/quick_start/m5stick/m5stick_quick_start_with_uiflow) \ No newline at end of file +[Arduino-MacOS](zh_CN/quick_start/m5stick/m5stick_quick_start_with_arduino_MacOS) | [Arduino-Windows](zh_CN/quick_start/m5stick/m5stick_quick_start_with_arduino_Windows) | [UIFlow](zh_CN/quick_start/m5stick/m5stick_quick_start_with_uiflow) \ No newline at end of file diff --git a/docs/zh_CN/related_documents/how_to_burn_firmware.md b/docs/zh_CN/related_documents/how_to_burn_firmware.md index 5240951a..18501a7f 100644 --- a/docs/zh_CN/related_documents/how_to_burn_firmware.md +++ b/docs/zh_CN/related_documents/how_to_burn_firmware.md @@ -36,7 +36,7 @@ **选择板子正与PC相连的`串口号`和`921600 波特率`, 选择合适的固件文件, 点击`Erase`, 然后等擦除固件完成，点击`Burn`** -?> **Tip** **a.** 如果您想通过 [UiFlow](http://flow.m5stack.com)(/[M5Cloud](http://cloud.m5stack.com)) 来编程的话，请选择最新的 `M5Flow-vx.x`(/`M5Cloud-vx.x.x`) **b.** 如果您想有 ESP32CAM (或 M5CAMERA)，并且想编程它的话，请选择最新版的`M5Cam-vx.x (/M5Cam-psram)` +?> **Tip** **a.** 如果您想通过 [UIFlow](http://flow.m5stack.com)(/[M5Cloud](http://cloud.m5stack.com)) 来编程的话，请选择最新的 `M5Flow-vx.x`(/`M5Cloud-vx.x.x`) **b.** 如果您想有 ESP32CAM (或 M5CAMERA)，并且想编程它的话，请选择最新版的`M5Cam-vx.x (/M5Cam-psram)` @@ -44,7 +44,7 @@ **a. 选择合适的固件文件** -a. 如果您想通过 [UiFlow](http://flow.m5stack.com)来编程的话，请选择最新的 `M5Flow-vx.x` +a. 如果您想通过 [UIFlow](http://flow.m5stack.com)来编程的话，请选择最新的 `M5Flow-vx.x` b. 如果您想有 ESP32CAM (或 M5CAMERA)，并且想编程它的话，请选择最新版的 `M5Cam-vx.x (/M5Cam-psram)` @@ -174,6 +174,6 @@ sudo pacman -S --needed python-pip ## 视频教程 -**[Windows](https://v.youku.com/v_show/id_XNDAxOTEyNTQ2NA==.html?spm=a2hzp.8253869.0.0)** +**Windows** - + diff --git a/docs/zh_CN/related_documents/how_to_connect_wifi_using_core.md b/docs/zh_CN/related_documents/how_to_connect_wifi_using_core.md index fff9410c..c19c887b 100644 --- a/docs/zh_CN/related_documents/how_to_connect_wifi_using_core.md +++ b/docs/zh_CN/related_documents/how_to_connect_wifi_using_core.md @@ -1,12 +1,12 @@ -# 连接Wi-Fi(For UiFlow) {docsify-ignore-all} +# 连接Wi-Fi(For UIFlow) {docsify-ignore-all} :clapper: **[视频教程](#视频教程)**      :memo: **[文本教程](#文本教程)** *** -?> *如果你的M5Core还没预先烧录了UiFlow固件的话，参考这篇文章[如何使用M5Burner烧录固件](zh_CN/related_documents/how_to_burn_firmware))* +?> *如果你的M5Core还没预先烧录了UIFlow固件的话，参考这篇文章[如何使用M5Burner烧录固件](zh_CN/related_documents/how_to_burn_firmware))* -**烧录了UiFlow的固件，并重启M5Core之后，你会看到如下的欢迎界面，然后我们开始连接Wi-Fi.** +**烧录了UIFlow的固件，并重启M5Core之后，你会看到如下的欢迎界面，然后我们开始连接Wi-Fi.**
@@ -49,7 +49,7 @@ ## 完成 -重启M5Core之后，按`upload`按键，这时候，看到下图带二维码的界面。这很好我们就可以跟着这篇文章[UiFlow编程](zh_CN/quick_start/m5core/m5stack_core_get_started_MicroPython)学习UiFlow的编程啦！ +重启M5Core之后，按`upload`按键，这时候，看到下图带二维码的界面。这很好我们就可以跟着这篇文章[UIFlow编程](zh_CN/quick_start/m5core/m5stack_core_get_started_MicroPython)学习UIFlow的编程啦！
@@ -64,7 +64,7 @@ ## 最后 -现在，你可以阅读这篇文章开始使用UiFlow编程啦！[UiFlow上手指南](zh_CN/quick_start/m5core/m5stack_core_get_started_MicroPython) +现在，你可以阅读这篇文章开始使用UIFlow编程啦！[UIFlow上手指南](zh_CN/quick_start/m5core/m5stack_core_get_started_MicroPython) ## 视频教程 diff --git a/docs/zh_CN/unit/396port.md b/docs/zh_CN/unit/396port.md index 99dec50a..55d99a2c 100644 --- a/docs/zh_CN/unit/396port.md +++ b/docs/zh_CN/unit/396port.md @@ -13,7 +13,7 @@ ## 特性 - VH3.96接口 -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - Unit内置两个Lego插件孔，方便与Lego件结合 ## 相关链接 diff --git a/docs/zh_CN/unit/adc.md b/docs/zh_CN/unit/adc.md index 60902697..426df549 100644 --- a/docs/zh_CN/unit/adc.md +++ b/docs/zh_CN/unit/adc.md @@ -16,7 +16,7 @@ - 内置可编程放大器，从而可以采集幅值更小的模拟信号 - 放大倍数：1, 2, 4, 或 8 - 能测量0~12V的电压输入 - + - Unit内置两个Lego插件孔，方便与Lego件结合 ## 应用 diff --git a/docs/zh_CN/unit/angle.md b/docs/zh_CN/unit/angle.md index 8f85c67f..dfa38e26 100644 --- a/docs/zh_CN/unit/angle.md +++ b/docs/zh_CN/unit/angle.md @@ -12,7 +12,7 @@ ANGLE是一个电位器Unit，通过这个Unit可以检测手动旋转的角度. ## 特性 -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - Unit内置两个Lego插件孔，方便与Lego件结合 ## 相关链接 diff --git a/docs/zh_CN/unit/button.md b/docs/zh_CN/unit/button.md index e0262ffa..7942a9b1 100644 --- a/docs/zh_CN/unit/button.md +++ b/docs/zh_CN/unit/button.md @@ -12,7 +12,7 @@ BUTTON 是一个单按键 unit 。这个 Unit 能检测你是否按下了按键 ## 特性 -- GROVE 接口，支持 [UiFlow](http://flow.m5stack.com) 编程，[Arduino](http://www.arduino.cc) 编程 +- GROVE 接口，支持 [UIFlow](http://flow.m5stack.com) 编程，[Arduino](http://www.arduino.cc) 编程 - Unit 内置两个 Lego 插件孔，方便与 Lego 件结合 ## 相关链接 diff --git a/docs/zh_CN/unit/cardkb.md b/docs/zh_CN/unit/cardkb.md index dd19a6aa..5e99f8b7 100644 --- a/docs/zh_CN/unit/cardkb.md +++ b/docs/zh_CN/unit/cardkb.md @@ -31,7 +31,7 @@ - GROVE接口，IIC通讯 - 全键盘功能，多种按键组合方式 - + ## 相关链接 diff --git a/docs/zh_CN/unit/catear.md b/docs/zh_CN/unit/catear.md index 12daacc2..13b245eb 100644 --- a/docs/zh_CN/unit/catear.md +++ b/docs/zh_CN/unit/catear.md @@ -13,7 +13,7 @@ ## 特性 - RGB LED灯数: 118 -- GROVE接口，支持 [UiFlow](http://flow.m5stack.com) 编程，[Arduino](http://www.arduino.cc) 编程 +- GROVE接口，支持 [UIFlow](http://flow.m5stack.com) 编程，[Arduino](http://www.arduino.cc) 编程 ## 相关链接 diff --git a/docs/zh_CN/unit/dac.md b/docs/zh_CN/unit/dac.md index 15ffc236..fa7da924 100644 --- a/docs/zh_CN/unit/dac.md +++ b/docs/zh_CN/unit/dac.md @@ -16,7 +16,7 @@ - 高达12位的转换精度 - 0~3.3V幅度的电压输出 - + - Unit内置两个Lego插件孔，方便与Lego件结合 ## 应用 diff --git a/docs/zh_CN/unit/dual_button.md b/docs/zh_CN/unit/dual_button.md index 8e092465..9e43c5dc 100644 --- a/docs/zh_CN/unit/dual_button.md +++ b/docs/zh_CN/unit/dual_button.md @@ -12,7 +12,7 @@ ## 特性 -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - Unit内置两个Lego插件孔，方便与Lego件结合 ## 相关链接 diff --git a/docs/zh_CN/unit/earth.md b/docs/zh_CN/unit/earth.md index 2c26b0d0..e1601826 100644 --- a/docs/zh_CN/unit/earth.md +++ b/docs/zh_CN/unit/earth.md @@ -18,7 +18,7 @@ Unit可以输出0/1的数字信号，也可以直接输出被测物体反映的 - 可调节测量阈值(通过改变Unit上的10K可调电阻) - 数字或模拟信号输出 -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - Unit内置两个Lego插件孔，方便与Lego件结合 ## 相关链接 diff --git a/docs/zh_CN/unit/env.md b/docs/zh_CN/unit/env.md index 51548c43..a3938933 100644 --- a/docs/zh_CN/unit/env.md +++ b/docs/zh_CN/unit/env.md @@ -21,7 +21,7 @@ - 气压测量 - 范围: 300 ~ 1100hPa - 精度: ±1hPa -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - Unit内置两个Lego插件孔，方便与Lego件结合 ## 相关链接 diff --git a/docs/zh_CN/unit/extio.md b/docs/zh_CN/unit/extio.md index c9d0be81..571866a3 100644 --- a/docs/zh_CN/unit/extio.md +++ b/docs/zh_CN/unit/extio.md @@ -17,7 +17,7 @@ ## 特性 - 拓展成8个输出/输出的IO引脚 -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 ## 相关链接 diff --git a/docs/zh_CN/unit/gps.md b/docs/zh_CN/unit/gps.md index 69944322..e1b06fa3 100644 --- a/docs/zh_CN/unit/gps.md +++ b/docs/zh_CN/unit/gps.md @@ -23,7 +23,7 @@ - BDS/GPS双模连续运行：<23mA（@3.3V） - 待机：<10uA（@3.3V） - 工作温度：-40~85℃ - + - Unit内置两个Lego插件孔，方便与Lego件结合 ## 应用 diff --git a/docs/zh_CN/unit/heart.md b/docs/zh_CN/unit/heart.md index b889b034..6dd8f8d8 100644 --- a/docs/zh_CN/unit/heart.md +++ b/docs/zh_CN/unit/heart.md @@ -16,7 +16,7 @@ - 高输入阻抗，低噪声 - 工作温度范围：-40°C ~ 85°C - + - Unit内置两个Lego插件孔，方便与Lego件结合 ## 相关链接 diff --git a/docs/zh_CN/unit/hex.md b/docs/zh_CN/unit/hex.md index 2ecf84d2..f5e5bd67 100644 --- a/docs/zh_CN/unit/hex.md +++ b/docs/zh_CN/unit/hex.md @@ -19,7 +19,7 @@ ## 特性 - RGB LED灯数: 37 -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 ## 相关链接 diff --git a/docs/zh_CN/unit/ir.md b/docs/zh_CN/unit/ir.md index 66e892e8..3cbf5c35 100644 --- a/docs/zh_CN/unit/ir.md +++ b/docs/zh_CN/unit/ir.md @@ -16,7 +16,7 @@ - 内置一对红外发送和接收管 - 检测距离: 2 ~ 5cm -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - Unit内置两个Lego插件孔，方便与Lego件结合 ## 相关链接 diff --git a/docs/zh_CN/unit/joystick.md b/docs/zh_CN/unit/joystick.md index f66573de..a11cfda7 100644 --- a/docs/zh_CN/unit/joystick.md +++ b/docs/zh_CN/unit/joystick.md @@ -19,7 +19,7 @@ Joystick Unit同样也是与M5Core相连之后，通过PORT A(I2C)控制，其I2 ## 特性 - X, Y方向的范围10~250, Z方向(0: 未按下, 1: 按下) -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - Unit内置两个Lego插件孔，方便与Lego件结合 ## 相关链接 diff --git a/docs/zh_CN/unit/light.md b/docs/zh_CN/unit/light.md index e00c2bc2..a27f76db 100644 --- a/docs/zh_CN/unit/light.md +++ b/docs/zh_CN/unit/light.md @@ -16,7 +16,7 @@ LIGHT 在光照强度弱的时候，数字引脚输出高电平，即数字信 - 10K可调电阻 - 模拟或数字信号输出 -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - Unit内置两个Lego插件孔，方便与Lego件结合 ## 相关链接 diff --git a/docs/zh_CN/unit/makey.md b/docs/zh_CN/unit/makey.md index e7bba92b..f12b177f 100644 --- a/docs/zh_CN/unit/makey.md +++ b/docs/zh_CN/unit/makey.md @@ -24,7 +24,7 @@ unit通过GROVE线连接至m5core的接口A后，烧录[例程](https://github.c - 内置Mega328p芯片，蜂鸣器，RGBLed -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - Unit内置两个Lego插件孔，方便与Lego件结合 ## 应用 diff --git a/docs/zh_CN/unit/ncir.md b/docs/zh_CN/unit/ncir.md index 7e5d5202..d410d079 100644 --- a/docs/zh_CN/unit/ncir.md +++ b/docs/zh_CN/unit/ncir.md @@ -16,7 +16,7 @@ - 高精度 - 测量温度范围: -70℃~382.2℃ -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - Unit内置两个Lego插件孔，方便与Lego件结合 ## 应用 diff --git a/docs/zh_CN/unit/neoflash.md b/docs/zh_CN/unit/neoflash.md index 9e049656..de8b0f7f 100644 --- a/docs/zh_CN/unit/neoflash.md +++ b/docs/zh_CN/unit/neoflash.md @@ -19,7 +19,7 @@ ## 特性 - RGB LED灯数: 192 -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 ## 相关链接 diff --git a/docs/zh_CN/unit/neopixel.md b/docs/zh_CN/unit/neopixel.md index c8ecd740..39b26a9d 100644 --- a/docs/zh_CN/unit/neopixel.md +++ b/docs/zh_CN/unit/neopixel.md @@ -8,7 +8,7 @@ ## 描述 -**NeoPixel**是带GROVE接口的NeoPixel灯带，将NeoPixel Unit与M5Core相连，可以很方便地实现控制，特别是使用[UiFlow](http://flow.m5stack.com)来编程。 +**NeoPixel**是带GROVE接口的NeoPixel灯带，将NeoPixel Unit与M5Core相连，可以很方便地实现控制，特别是使用[UIFlow](http://flow.m5stack.com)来编程。 ?> NeoPixel Unit有输入和输出口，在接M5Core的时候，记得看清楚Unit上的箭头(顺序)方向，一定要输入口接M5Core，然后输出口还可以通过GROVE线，接下一条NeoPixel Unit，从而串联一起。 @@ -17,7 +17,7 @@ ## 特性 - 可选长度: 10cm/20cm/0.5m/1m/2m -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - Unit内置两个Lego插件孔，方便与Lego件结合 ## 相关链接 diff --git a/docs/zh_CN/unit/pir.md b/docs/zh_CN/unit/pir.md index 2dee1b51..395c31aa 100644 --- a/docs/zh_CN/unit/pir.md +++ b/docs/zh_CN/unit/pir.md @@ -16,7 +16,7 @@ - 检测距离：150cm - PIR如果感应到红外信号变动，会延时2s左右才动作 -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - Unit内置两个Lego插件孔，方便与Lego件结合 ## 相关链接 diff --git a/docs/zh_CN/unit/proto.md b/docs/zh_CN/unit/proto.md index 24f4bda9..13062e1f 100644 --- a/docs/zh_CN/unit/proto.md +++ b/docs/zh_CN/unit/proto.md @@ -17,7 +17,7 @@ ## 特性 - 70 孔(每个孔宽：100mil) -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - Unit内置两个Lego插件孔，方便与Lego件结合 ## 相关链接 diff --git a/docs/zh_CN/unit/relay.md b/docs/zh_CN/unit/relay.md index f782ab08..082ff1f3 100644 --- a/docs/zh_CN/unit/relay.md +++ b/docs/zh_CN/unit/relay.md @@ -13,7 +13,7 @@ ## 特性 - DC: 3A @ 30V; AC: 3A @ 220V -- GROVE 接口，支持 [UiFlow](http://flow.m5stack.com) 编程，[Arduino](http://www.arduino.cc) 编程 +- GROVE 接口，支持 [UIFlow](http://flow.m5stack.com) 编程，[Arduino](http://www.arduino.cc) 编程 - Unit 内置两个 Lego 插件孔，方便与 Lego 件结合 ## 相关链接 diff --git a/docs/zh_CN/unit/rgb.md b/docs/zh_CN/unit/rgb.md index d3541efc..3848dc64 100644 --- a/docs/zh_CN/unit/rgb.md +++ b/docs/zh_CN/unit/rgb.md @@ -14,7 +14,7 @@ ## 特性 -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - Unit内置两个Lego插件孔，方便与Lego件结合 ## 相关链接 diff --git a/docs/zh_CN/unit/rs485.md b/docs/zh_CN/unit/rs485.md index d977380f..1bde3951 100644 --- a/docs/zh_CN/unit/rs485.md +++ b/docs/zh_CN/unit/rs485.md @@ -17,7 +17,7 @@ ## 特性 - 驱动最高12V的RS485设备 -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 - Unit内置两个Lego插件孔，方便与Lego件结合 ## 相关链接 diff --git a/docs/zh_CN/unit/thermal.md b/docs/zh_CN/unit/thermal.md index 2c205814..efc2d254 100644 --- a/docs/zh_CN/unit/thermal.md +++ b/docs/zh_CN/unit/thermal.md @@ -18,7 +18,7 @@ ## 特性 - 目标温度：-40°C ~ 300°C - + - Unit内置两个Lego插件孔，方便与Lego件结合 ## 应用 diff --git a/docs/zh_CN/unit/tof.md b/docs/zh_CN/unit/tof.md index 86c41c75..f6dc4322 100644 --- a/docs/zh_CN/unit/tof.md +++ b/docs/zh_CN/unit/tof.md @@ -17,7 +17,7 @@ - 高精度 - 测量距离最大2m - 激光波长: 940nm - + - Unit内置两个Lego插件孔，方便与Lego件结合 ## 应用 diff --git a/docs/zh_CN/unit/trace.md b/docs/zh_CN/unit/trace.md index 2b8c0f5b..0d066999 100644 --- a/docs/zh_CN/unit/trace.md +++ b/docs/zh_CN/unit/trace.md @@ -19,7 +19,7 @@ TRACE Unit 同样也是通过 IIC 与主控通信，其I2C地址是0x5A。与 M5 ## 特性 - 工作范围：反射面距离光电对管面小于 11mm -- GROVE接口，支持[UiFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 +- GROVE接口，支持[UIFlow](http://flow.m5stack.com)编程，[Arduino](http://www.arduino.cc)编程 ## 相关链接 diff --git a/docs/zh_CN/unit/weight.md b/docs/zh_CN/unit/weight.md index 7e4ab2e2..613ee4db 100644 --- a/docs/zh_CN/unit/weight.md +++ b/docs/zh_CN/unit/weight.md @@ -25,7 +25,7 @@ - 可编程放大倍数：32, 64, 128 - HX711内部ADC精度：24位 - Unit输出电压范围：0 ~ 5mV -- GROVE 接口，支持 [UiFlow](http://flow.m5stack.com) 编程，[Arduino](http://www.arduino.cc) 编程 +- GROVE 接口，支持 [UIFlow](http://flow.m5stack.com) 编程，[Arduino](http://www.arduino.cc) 编程 - Unit 内置两个 Lego 插件孔，方便与 Lego 件结合 ## 应用
ESP32 ChipGPIO22GPIO215VGND