From a8c0e9f54e0c75fbbd3b7c18aca39adb0383e699 Mon Sep 17 00:00:00 2001 From: watson8544 <854410664@qq.com> Date: Fri, 26 Oct 2018 18:38:48 +0800 Subject: [PATCH] fixed a bug --- .../establish_serial_connection.md | 30 +++++++++---------- .../how_to_burn_firmware_en.md | 14 ++++----- .../how_to_connect_wifi_using_core.md | 12 ++++---- .../related_documents/upgrade_m5stack_lib.md | 4 +-- 4 files changed, 30 insertions(+), 30 deletions(-) diff --git a/docs/en/related_documents/establish_serial_connection.md b/docs/en/related_documents/establish_serial_connection.md index 857fdb01..646a5ae0 100644 --- a/docs/en/related_documents/establish_serial_connection.md +++ b/docs/en/related_documents/establish_serial_connection.md @@ -11,43 +11,43 @@ **As the disk image SiLabsUSBDriverDisk.dmg is downloaded, mount it. Proceed according to the instructions OK.**
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
### 2. Check port on MacOS @@ -69,21 +69,21 @@ **Choice the version of USB driver according to your windows version(Windows7/8/10).**
- +
**Choice the right version installer(x64/x86), and install it.**
- +
- +
- +
### 2. Check port on Windows @@ -93,5 +93,5 @@ **Figures below show serial port for M5Stack Core board**
- +
diff --git a/docs/en/related_documents/how_to_burn_firmware_en.md b/docs/en/related_documents/how_to_burn_firmware_en.md index 7b9e6a54..950fc909 100644 --- a/docs/en/related_documents/how_to_burn_firmware_en.md +++ b/docs/en/related_documents/how_to_burn_firmware_en.md @@ -13,7 +13,7 @@ For downloading M5Burner, visit the [offical website](http://www.m5stack.com) please.
- Screenshot of coverpage + Screenshot of coverpage
### 2. Burn the firmware @@ -21,14 +21,14 @@ For downloading M5Burner, visit the [offical website](http://www.m5stack.com) pl Unzip the M5Burner tool which you donwloaded for official website just now, then double click `M5Burner.exe`.
- Screenshot of coverpage + Screenshot of coverpage
**Then choice the `serial port` which is connected with your board and the `Baud` which is 921600 following below steps.**
- Screenshot of coverpage + Screenshot of coverpage
!> **Notice** If it does not display any ``COMx`` port or only ``COM1`` exists at the option, you need to visit this article [establish_serial_connection](related_documents/establish_serial_connection) and reinstall the USB driver. @@ -42,25 +42,25 @@ b. select `M5Cam-vx.x (/M5Cam-psram)` option, if you own a ESP32CAM (/ M5CAMERA) **b. Click `Erase`**
- Screenshot of coverpage + Screenshot of coverpage
*If M5Burner shows the information `Hard resetting via RTS pin...` below, it means chip has been erased successfully.*
- Screenshot of coverpage + Screenshot of coverpage
**c. Click `Burn`**
- Screenshot of coverpage + Screenshot of coverpage
*If M5Burner shows the information `Leaving... Staying in bootloader.` below, it means chip has been burnt successfully.*
- Screenshot of coverpage + Screenshot of coverpage
### 3. Then reset your board diff --git a/docs/en/related_documents/how_to_connect_wifi_using_core.md b/docs/en/related_documents/how_to_connect_wifi_using_core.md index f1ef2efb..0109acef 100644 --- a/docs/en/related_documents/how_to_connect_wifi_using_core.md +++ b/docs/en/related_documents/how_to_connect_wifi_using_core.md @@ -22,7 +22,7 @@ **Now, press the `upload` buttom. The screen will show this message.**
- +
## 2. Select Networkable AP @@ -30,7 +30,7 @@ **Use Mobile Phone or PC for connectting to M5Core AP(like `M5Stack-a67c`), and then open brower to login 192.168.4.1 for setting your networkable WIFI name and password. (Now, my networkable wifi is named `MasterHax_5G`)**
- +
## 3. Reset Your Device @@ -38,19 +38,19 @@ **After connected wifi successfully, reset your core according to the prompt on `192.168.4.1`**
- +
## Complete -Once you've reset M5Stack Core, pressed the upload buttom, you will arrive at a screen with a QR code. Now, you can try to program with your core following this article [Quick Start with M5Flow](../quick_start/m5core/m5stack_core_get_started_MicroPython) +Once you've reset M5Stack Core, pressed the upload buttom, you will arrive at a screen with a QR code. Now, you can try to program with your core following this article [Quick Start with M5Flow](quick_start/m5core/m5stack_core_get_started_MicroPython)
- +
?> **Note** Similarly, if you want another networkable WIFI AP to connect with Core, press the SETUP buttom while core was power-up.
- +
\ No newline at end of file diff --git a/docs/en/related_documents/upgrade_m5stack_lib.md b/docs/en/related_documents/upgrade_m5stack_lib.md index d5b5f328..6da8c7a1 100644 --- a/docs/en/related_documents/upgrade_m5stack_lib.md +++ b/docs/en/related_documents/upgrade_m5stack_lib.md @@ -5,7 +5,7 @@ ### 2. Type `M5Stack` into the search box, search it.
- Screenshot of coverpage + Screenshot of coverpage
### 3. If it shows as below figure, click `Update`. @@ -13,5 +13,5 @@ **But if it shows `Install`, it means you has not installed M5Stack Lib. So, you need click `Install` for installing lib.**
- Screenshot of coverpage + Screenshot of coverpage