diff --git a/docs/en/core/basic.md b/docs/en/core/basic.md index 06885c37..203586f1 100644 --- a/docs/en/core/basic.md +++ b/docs/en/core/basic.md @@ -52,6 +52,18 @@ M5Stack Basic is consist with two separable parts. the upside part has all kinds - SDIO master/salve 50MHz - SD-card interface support +## EasyLoader + + + + + +>1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. + +>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. + +!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/establish_serial_connection) + ## Peripherals Pin Map **LCD & TF Card** diff --git a/docs/en/module/commu.md b/docs/en/module/commu.md index bcf8858d..ad683a32 100644 --- a/docs/en/module/commu.md +++ b/docs/en/module/commu.md @@ -57,8 +57,11 @@ Be care about TTL Interface. It is a UART Interface actually by default. But you ## EasyLoader + + + + >1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. -[Click here to download](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_COMMU_Test_B.exe) >2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. diff --git a/docs/en/module/encoder.md b/docs/en/module/encoder.md index 01559d62..49062933 100644 --- a/docs/en/module/encoder.md +++ b/docs/en/module/encoder.md @@ -22,6 +22,18 @@ The series communication protocol between M5 core and ENCODER is IIC (adress: 0x - Mega328 inside - Encoder detection +## EasyLoader + + + + + +>1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. + +>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. + +!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/establish_serial_connection) + ## Function **Control single RGB** diff --git a/docs/en/module/goplus.md b/docs/en/module/goplus.md index e8c8390f..9d80f590 100644 --- a/docs/en/module/goplus.md +++ b/docs/en/module/goplus.md @@ -31,6 +31,18 @@ Communication Protocol: IIC (0x61). - 1x M5Stack GoPlus Module +## EasyLoader + + + + + +>1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. + +>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. + +!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/establish_serial_connection) + ## Schematic diff --git a/docs/en/module/gps.md b/docs/en/module/gps.md index e87af804..3aa50e98 100644 --- a/docs/en/module/gps.md +++ b/docs/en/module/gps.md @@ -65,10 +65,13 @@ If you want to Change the uart baudrate,please check here ( [u-center-just-for-W - **[u-blox Protocol Manual](https://www.u-blox.com/sites/default/files/products/documents/u-blox8-M8_ReceiverDescrProtSpec_%28UBX-13003221%29_Public.pdf)** -### EasyLoader +## EasyLoader + + + + >1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. -[Click here to download](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_GPSRaw.exe) >2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. diff --git a/docs/en/module/joystick.md b/docs/en/module/joystick.md index a23a8eb4..fac32921 100644 --- a/docs/en/module/joystick.md +++ b/docs/en/module/joystick.md @@ -73,8 +73,11 @@ void get_joystick_offset(void){ ## EasyLoader + + + + >1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. -[Click here to download](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_Faces_Joystick.exe) >2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. diff --git a/docs/en/module/lego_plus.md b/docs/en/module/lego_plus.md index fc9e2dcf..2177bd83 100644 --- a/docs/en/module/lego_plus.md +++ b/docs/en/module/lego_plus.md @@ -41,8 +41,11 @@ LEGO motor is one of the Technic pieces form LEGO. The purpose of LEGO Technic i ## EasyLoader + + + + >1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. -[Click here to download](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_LEGO_Test.exe) >2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. diff --git a/docs/en/module/lora.md b/docs/en/module/lora.md index bbdf97da..a92164f7 100644 --- a/docs/en/module/lora.md +++ b/docs/en/module/lora.md @@ -56,8 +56,11 @@ LoRa and LoRaWAN permit long-range connectivity for Internet of Things (IoT) dev ## EasyLoader + + + + >1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. -[Click here to download](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_LoRaReceiverCallback.exe) >2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. diff --git a/docs/en/module/lorawan.md b/docs/en/module/lorawan.md index 35b028cb..a284b470 100644 --- a/docs/en/module/lorawan.md +++ b/docs/en/module/lorawan.md @@ -90,13 +90,17 @@ By default, the UART configuration: "9600, 8, n, 1"(8 bits data, no parity, 1 st ## EasyLoader + + + + >1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. -[Click here to download](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_LoRaWAN_Transmmiter.exe) >2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. !>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/establish_serial_connection) + ## Example ### Arduino IDE diff --git a/docs/en/module/plus.md b/docs/en/module/plus.md index 24b44840..1c6898c6 100644 --- a/docs/en/module/plus.md +++ b/docs/en/module/plus.md @@ -31,10 +31,13 @@ Communication Protocol: IIC (0x62). - **[The Firmware of inside MEGA328](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Module/PLUS/firmware_328p)** -### EasyLoader +## EasyLoader + + + + >1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. -[Click here to download](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_Plus.exe) >2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. diff --git a/docs/en/module/servo.md b/docs/en/module/servo.md index 291b54e1..140c1443 100644 --- a/docs/en/module/servo.md +++ b/docs/en/module/servo.md @@ -37,10 +37,13 @@ Servo is powered by MEGA328 communicate via IIC(0x53). - **[The Firmware of inside MEGA328](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Module/SERVO/firmware_328p)** -### EasyLoader +## EasyLoader + + + + >1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. -[Click here to download](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_Servo.exe) >2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. diff --git a/docs/en/module/sim800.md b/docs/en/module/sim800.md index f4c591ad..ae6bbcfc 100644 --- a/docs/en/module/sim800.md +++ b/docs/en/module/sim800.md @@ -61,8 +61,11 @@ Series Protocol: UART ## EasyLoader + + + + >1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. -[Click here to download](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_SIM800L_Send_Message.exe) >2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. diff --git a/docs/en/module/stepmotor.md b/docs/en/module/stepmotor.md index 4de34343..9b0987d1 100644 --- a/docs/en/module/stepmotor.md +++ b/docs/en/module/stepmotor.md @@ -40,6 +40,18 @@ Integrated 3 DRV8825, a simple but very powerful board that can control one bipo - **[The Firmware of inside MEGA328](https://github.com/m5stack/stepmotor_module/tree/master/Firmware%20for%20stepmotor%20module/GRBL-Arduino-Library)** +## EasyLoader + + + + + +>1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. + +>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. + +!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/establish_serial_connection) + ## Example ### 1. Arduino IDE diff --git a/docs/en/module/usb.md b/docs/en/module/usb.md index 0bcd2c11..bed93705 100644 --- a/docs/en/module/usb.md +++ b/docs/en/module/usb.md @@ -38,8 +38,11 @@ Series Protocol: SPI ## EasyLoader + + + + >1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. -[Click here to download](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_USB_Mouse.exe) >2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. diff --git a/docs/en/unit/esp32cam.md b/docs/en/unit/esp32cam.md index cc10f4ea..d0abeb81 100644 --- a/docs/en/unit/esp32cam.md +++ b/docs/en/unit/esp32cam.md @@ -68,6 +68,18 @@ The hardware also comes with some reserved weld pad, just in case you want put t - 1x ESP32CAM Unit +## EasyLoader + + + + + +>1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. + +>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. + +!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/establish_serial_connection) + ## PinMap **Camera Interface PinMap** diff --git a/docs/en/unit/finger.md b/docs/en/unit/finger.md index 85173c78..17ea6c00 100644 --- a/docs/en/unit/finger.md +++ b/docs/en/unit/finger.md @@ -50,6 +50,20 @@ UART settings: - **[FINGER communication protocol](https://github.com/m5stack/M5-Schematic/blob/master/Units/finger/biovo_fingerprint_Protocol_en.DOC)** + +## EasyLoader + + + + + +>1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. + +>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. + +!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/establish_serial_connection) + + ## Example ### 1. Arduino IDE diff --git a/docs/en/unit/hex.md b/docs/en/unit/hex.md index ac90cd81..cbeb69e6 100644 --- a/docs/en/unit/hex.md +++ b/docs/en/unit/hex.md @@ -34,11 +34,18 @@ This is how LEDs layout in the panel. Pay attention to the sequence in your code - **[Forum](http://forum.m5stack.com/)** -RGB LED Library on Arduino +## EasyLoader -- **[FastLED Library](https://github.com/FastLED/FastLED/wiki/Overview)** + + + + +>1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. + +>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. + +!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/establish_serial_connection) -- **[FastLED Reference(Chinese version)](http://www.taichi-maker.com/homepage/reference-index/arduino-library-index/fastled-library/)** ## Example @@ -47,6 +54,12 @@ RGB LED Library on Arduino FastLED library on Arduino presents excellent and colorful lighting effects. Before compile, it is require to install the FastLED library and connect HEX to GROVE A. +RGB LED Library on Arduino + +- **[FastLED Library](https://github.com/FastLED/FastLED/wiki/Overview)** + +- **[FastLED Reference(Chinese version)](http://www.taichi-maker.com/homepage/reference-index/arduino-library-index/fastled-library/)** + *To get the complete code, please click [here](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Unit/HEX/Arduino)。* ```arduino diff --git a/docs/en/unit/m5camera.md b/docs/en/unit/m5camera.md index cb3fca9b..df6ce3a5 100644 --- a/docs/en/unit/m5camera.md +++ b/docs/en/unit/m5camera.md @@ -79,6 +79,18 @@ The hardware also comes with some reserved weld pad, just in case you want put t - 1x M5Camera - 1x Type-C USB Cable +## EasyLoader + + + + + +>1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. + +>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. + +!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/establish_serial_connection) + ## PinMap **There are two versions of M5Camera Unit: A Model and B Model.** diff --git a/docs/en/unit/m5camera_f.md b/docs/en/unit/m5camera_f.md index 0c6165a0..fc067463 100644 --- a/docs/en/unit/m5camera_f.md +++ b/docs/en/unit/m5camera_f.md @@ -76,6 +76,18 @@ The hardware also comes with some reserved weld pad, just in case you want put t +## EasyLoader + + + + + +>1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. + +>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. + +!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/establish_serial_connection) + ## PinMap **Camera Interface PinMap** diff --git a/docs/en/unit/m5camera_x.md b/docs/en/unit/m5camera_x.md index 351a2e1e..e6873c87 100644 --- a/docs/en/unit/m5camera_x.md +++ b/docs/en/unit/m5camera_x.md @@ -70,6 +70,18 @@ The hardware also comes with some reserved weld pad, just in case you want put t - 1x Wall-1515 - 1x Type-C USB Cable +## EasyLoader + + + + + +>1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. + +>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. + +!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/establish_serial_connection) + ## PinMap **Camera Interface PinMap** diff --git a/docs/en/unit/rs485.md b/docs/en/unit/rs485.md index b6400073..e5c62142 100644 --- a/docs/en/unit/rs485.md +++ b/docs/en/unit/rs485.md @@ -34,6 +34,19 @@ used for converting TTL level to RS485 level. If the device to be controlled onl - Datasheet - **[MAX485](https://pdf1.alldatasheet.com/datasheet-pdf/view/73463/MAXIM/MAX485.html)** - **[SP485EEN](https://pdf1.alldatasheet.com/datasheet-pdf/view/45954/SIPEX/SP485EEN.html)** +## EasyLoader + + + + + +>1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. + +>2.After downloading the software, double-click to run the application, connect the M5 device to the computer via the data cable, select the port parameters, and click **"Burn"** to start burning. + +!>3.The CP210X (USB driver) needs to be installed before the EasyLoader is burned. [Click here to view the driver installation tutorial](en/related_documents/establish_serial_connection) + + ### PinMap diff --git a/docs/en/unit/thermal.md b/docs/en/unit/thermal.md index 1e320be9..1ad696f1 100644 --- a/docs/en/unit/thermal.md +++ b/docs/en/unit/thermal.md @@ -53,7 +53,7 @@ The Unit communicates with the M5Core through the Grove A interface, IIC address - + >1.EasyLoader is a simple and fast program burner, and each product page has a product-related case program for EasyLoader. diff --git a/docs/zh_CN/core/basic.md b/docs/zh_CN/core/basic.md index 10f7bc43..def13d9d 100644 --- a/docs/zh_CN/core/basic.md +++ b/docs/zh_CN/core/basic.md @@ -52,6 +52,18 @@ M5Stack Basic 由两个可分离部分堆叠组成. 顶部放置了电路板， - SDIO master/salve 50MHz - 支持SD卡接口 +## EasyLoader + + + + + +>1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. + +>2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 + +!>3.EasyLoader烧录前需要安装有CP210X（USB驱动程序），[点击此处查看驱动安装教程](zh_CN/related_documents/M5Burner#安装串口驱动) + ## 外设的管脚映射 **LCD 屏幕 & TF 卡** diff --git a/docs/zh_CN/core/fire.md b/docs/zh_CN/core/fire.md index 367e62d3..379ef14b 100644 --- a/docs/zh_CN/core/fire.md +++ b/docs/zh_CN/core/fire.md @@ -56,6 +56,7 @@ M5Stack Fire 配有三个可分离部件. 顶部与其他的M5主机一样，放 - SDIO master/salve 50MHz - 支持SD卡接口 + ### 外设的管脚映射 **LCD 屏幕 & TF 卡** diff --git a/docs/zh_CN/module/commu.md b/docs/zh_CN/module/commu.md index ba25f8c6..f16463a4 100644 --- a/docs/zh_CN/module/commu.md +++ b/docs/zh_CN/module/commu.md @@ -55,8 +55,11 @@ ## EasyLoader + + + + >1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. -[点击此处下载](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_COMMU_Test_B.exe) >2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 diff --git a/docs/zh_CN/module/encoder.md b/docs/zh_CN/module/encoder.md index b7d5b819..95b8064e 100644 --- a/docs/zh_CN/module/encoder.md +++ b/docs/zh_CN/module/encoder.md @@ -82,8 +82,11 @@ void get_encoder_increment(void){ ## EasyLoader + + + + >1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. -[点击此处下载](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_faces_encoder.exe) >2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 diff --git a/docs/zh_CN/module/goplus.md b/docs/zh_CN/module/goplus.md index 914b3cba..d31c3d2e 100644 --- a/docs/zh_CN/module/goplus.md +++ b/docs/zh_CN/module/goplus.md @@ -32,6 +32,18 @@ - 1x M5Stack GoPlus Module +## EasyLoader + + + + + +>1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. + +>2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 + +!>3.EasyLoader烧录前需要安装有CP210X（USB驱动程序），[点击此处查看驱动安装教程](zh_CN/related_documents/M5Burner#安装串口驱动) + ## 原理图 diff --git a/docs/zh_CN/module/gps.md b/docs/zh_CN/module/gps.md index 30453f9c..59ab4a82 100644 --- a/docs/zh_CN/module/gps.md +++ b/docs/zh_CN/module/gps.md @@ -46,6 +46,7 @@ M5Core与GPS模块之间使用UART通信协议，通过连接引脚**UART2 (GPIO - 1x M5Stack GPS 模块 - 1x 外置天线(长度: 1 m) + ## 应用 - 基于 GPS 的物流跟踪管理 @@ -66,10 +67,13 @@ M5Core与GPS模块之间使用UART通信协议，通过连接引脚**UART2 (GPIO - **[u-blox 协议手册](https://www.u-blox.com/sites/default/files/products/documents/u-blox8-M8_ReceiverDescrProtSpec_%28UBX-13003221%29_Public.pdf)** -### EasyLoader +## EasyLoader + + + + >1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. -[点击此处下载](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_GPSRaw.exe) >2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 diff --git a/docs/zh_CN/module/joystick.md b/docs/zh_CN/module/joystick.md index d4a4aa4c..0afe4064 100644 --- a/docs/zh_CN/module/joystick.md +++ b/docs/zh_CN/module/joystick.md @@ -73,8 +73,11 @@ void get_joystick_offset(void){ ## EasyLoader + + + + >1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. -[点击此处下载](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_Faces_Joystick.exe) >2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 diff --git a/docs/zh_CN/module/lego_plus.md b/docs/zh_CN/module/lego_plus.md index d8ee7465..d52009b2 100644 --- a/docs/zh_CN/module/lego_plus.md +++ b/docs/zh_CN/module/lego_plus.md @@ -41,8 +41,11 @@ ## EasyLoader + + + + >1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. -[点击此处下载](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_LEGO_Test.exe) >2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 diff --git a/docs/zh_CN/module/lora.md b/docs/zh_CN/module/lora.md index 400f0116..c3c7458c 100644 --- a/docs/zh_CN/module/lora.md +++ b/docs/zh_CN/module/lora.md @@ -57,8 +57,11 @@ LoRa和LoRaWAN允许与不同类型的物联网（IoT）设备，进行远程连 ## EasyLoader + + + + >1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. -[点击此处下载](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_LoRaReceiverCallback.exe) >2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 diff --git a/docs/zh_CN/module/lorawan.md b/docs/zh_CN/module/lorawan.md index 44d18db5..8966a098 100644 --- a/docs/zh_CN/module/lorawan.md +++ b/docs/zh_CN/module/lorawan.md @@ -91,8 +91,11 @@ LoRaWAN默认的串口配置： 波特率为9600，8位数据位,无校验位,1 ## EasyLoader + + + + >1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. -[点击此处下载](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_LoRaWAN_Transmmiter.exe) >2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 diff --git a/docs/zh_CN/module/plus.md b/docs/zh_CN/module/plus.md index e9ebe4ef..2be2cef2 100644 --- a/docs/zh_CN/module/plus.md +++ b/docs/zh_CN/module/plus.md @@ -36,10 +36,13 @@ PLUS 上的PORT C 和 PORT B 的丝印画反了，使用时请注意。黑色的 - **[PLUS 固件](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Module/PLUS/firmware_328p)** -### EasyLoader +## EasyLoader + + + + >1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. -[点击此处下载](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_Plus.exe) >2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 diff --git a/docs/zh_CN/module/servo.md b/docs/zh_CN/module/servo.md index b79b5be2..a6fb86f6 100644 --- a/docs/zh_CN/module/servo.md +++ b/docs/zh_CN/module/servo.md @@ -37,10 +37,13 @@ SERVO 基于 MEGA328 芯片进行 I2C 通信(0x53). - **[SERVO 固件](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Module/SERVO/firmware_328p)** -### EasyLoader +## EasyLoader + + + + >1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. -[点击此处下载](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_Servo.exe) >2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 diff --git a/docs/zh_CN/module/sim800.md b/docs/zh_CN/module/sim800.md index 547bcd60..30aa6c6c 100644 --- a/docs/zh_CN/module/sim800.md +++ b/docs/zh_CN/module/sim800.md @@ -63,8 +63,11 @@ ## EasyLoader + + + + >1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. -[点击此处下载](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_SIM800L_Send_Message.exe) >2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 diff --git a/docs/zh_CN/module/stepmotor.md b/docs/zh_CN/module/stepmotor.md index 4304cd1f..61ad757e 100644 --- a/docs/zh_CN/module/stepmotor.md +++ b/docs/zh_CN/module/stepmotor.md @@ -40,6 +40,19 @@ - **[STEPMOTOR 固件](https://github.com/m5stack/stepmotor_module/tree/master/Firmware%20for%20stepmotor%20module/GRBL-Arduino-Library)** +## EasyLoader + + + + + +>1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. + +>2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 + +!>3.EasyLoader烧录前需要安装有CP210X（USB驱动程序），[点击此处查看驱动安装教程](zh_CN/related_documents/M5Burner#安装串口驱动) + + ## 例程 ### 1. Arduino IDE diff --git a/docs/zh_CN/module/usb.md b/docs/zh_CN/module/usb.md index 77301e97..08ea296f 100644 --- a/docs/zh_CN/module/usb.md +++ b/docs/zh_CN/module/usb.md @@ -38,8 +38,11 @@ ## EasyLoader + + + + >1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. -[点击此处下载](https://m5stack.oss-cn-shenzhen.aliyuncs.com/MiniBurner/Module/MiniBurner_USB_Mouse.exe) >2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 diff --git a/docs/zh_CN/unit/esp32cam.md b/docs/zh_CN/unit/esp32cam.md index a4c260a4..dadafbd3 100644 --- a/docs/zh_CN/unit/esp32cam.md +++ b/docs/zh_CN/unit/esp32cam.md @@ -68,6 +68,18 @@ - 1x ESP32CAM Unit +## EasyLoader + + + + + +>1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. + +>2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 + +!>3.EasyLoader烧录前需要安装有CP210X（USB驱动程序），[点击此处查看驱动安装教程](zh_CN/related_documents/M5Burner#安装串口驱动) + ## 管脚映射 **相机管脚映射** diff --git a/docs/zh_CN/unit/finger.md b/docs/zh_CN/unit/finger.md index 0e9deff5..dc3acb9d 100644 --- a/docs/zh_CN/unit/finger.md +++ b/docs/zh_CN/unit/finger.md @@ -42,6 +42,20 @@ UART 参数设置: - **[FINGER 通信协议](https://github.com/m5stack/M5-Schematic/blob/master/Units/finger/biovo_fingerprint_Protocol_zh_CN.DOC)** + +### EasyLoader + + + + + +>1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. + +>2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 + +!>3.EasyLoader烧录前需要安装有CP210X（USB驱动程序），[点击此处查看驱动安装教程](zh_CN/related_documents/M5Burner#安装串口驱动) + + ## 例程 ### 1. Arduino IDE diff --git a/docs/zh_CN/unit/hex.md b/docs/zh_CN/unit/hex.md index 9bd1d073..22605fdd 100644 --- a/docs/zh_CN/unit/hex.md +++ b/docs/zh_CN/unit/hex.md @@ -32,11 +32,19 @@ - **[官方论坛](http://forum.m5stack.com/)** -Neopixel Library on Arduino -- **[FastLED Library](https://github.com/FastLED/FastLED/wiki/Overview)** +## EasyLoader + + + + + +>1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. + +>2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 + +!>3.EasyLoader烧录前需要安装有CP210X（USB驱动程序），[点击此处查看驱动安装教程](zh_CN/related_documents/M5Burner#安装串口驱动) -- **[FastLED Reference(中文版本)](http://www.taichi-maker.com/homepage/reference-index/arduino-library-index/fastled-library/)** ## 例程 @@ -44,6 +52,12 @@ Neopixel Library on Arduino 在Arduino中使用第三库FastLED，能够为你的Neopixel提供出色的灯光特效.在进行程序编译前，需要安装FastLED，并将HEX连接到GROVE A. +Neopixel Library on Arduino + +- **[FastLED Library](https://github.com/FastLED/FastLED/wiki/Overview)** + +- **[FastLED Reference(中文版本)](http://www.taichi-maker.com/homepage/reference-index/arduino-library-index/fastled-library/)** + *以下代码仅为片段，如需获取完整代码， [请点击此处](https://github.com/m5stack/M5-ProductExampleCodes/tree/master/Unit/HEX/Arduino)。* ```arduino diff --git a/docs/zh_CN/unit/m5camera.md b/docs/zh_CN/unit/m5camera.md index cae34d85..a6b4be95 100644 --- a/docs/zh_CN/unit/m5camera.md +++ b/docs/zh_CN/unit/m5camera.md @@ -75,6 +75,18 @@ Model A 和 Model B,它们有着不同的电路设计、可以通过背面贴 - 1x M5Camera Unit - 1x Type-C USB +## EasyLoader + + + + + +>1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. + +>2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 + +!>3.EasyLoader烧录前需要安装有CP210X（USB驱动程序），[点击此处查看驱动安装教程](zh_CN/related_documents/M5Burner#安装串口驱动) + ## 管脚映射 **M5Camera 有两个版本：A Model 和 B Model.** diff --git a/docs/zh_CN/unit/m5camera_f.md b/docs/zh_CN/unit/m5camera_f.md index a2e15948..79d6bf9a 100644 --- a/docs/zh_CN/unit/m5camera_f.md +++ b/docs/zh_CN/unit/m5camera_f.md @@ -77,6 +77,20 @@ + +## EasyLoader + + + + + +>1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. + +>2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 + +!>3.EasyLoader烧录前需要安装有CP210X（USB驱动程序），[点击此处查看驱动安装教程](zh_CN/related_documents/M5Burner#安装串口驱动) + + ## 管脚映射 **相机管脚映射** diff --git a/docs/zh_CN/unit/m5camera_x.md b/docs/zh_CN/unit/m5camera_x.md index 05afb7d5..13d7e384 100644 --- a/docs/zh_CN/unit/m5camera_x.md +++ b/docs/zh_CN/unit/m5camera_x.md @@ -64,6 +64,18 @@ - 1x Wall-1515 - 1x Type-C USB +## EasyLoader + + + + + +>1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. + +>2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 + +!>3.EasyLoader烧录前需要安装有CP210X（USB驱动程序），[点击此处查看驱动安装教程](zh_CN/related_documents/M5Burner#安装串口驱动) + ## 管脚对比 **M5Camera 有两个版本：A Model 和 B Model.** diff --git a/docs/zh_CN/unit/rs485.md b/docs/zh_CN/unit/rs485.md index 45fc6027..9b1d25f9 100644 --- a/docs/zh_CN/unit/rs485.md +++ b/docs/zh_CN/unit/rs485.md @@ -35,6 +35,20 @@ - 数据手册 - **[MAX485](https://pdf1.alldatasheet.com/datasheet-pdf/view/73463/MAXIM/MAX485.html)** - **[SP485EEN](https://pdf1.alldatasheet.com/datasheet-pdf/view/45954/SIPEX/SP485EEN.html)** +## EasyLoader + + + + + +>1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. +[点击此处下载](https://m5stack.oss-cn-shenzhen.aliyuncs.com/EasyLoader/Unit/EasyLoader_RS485_A.exe) + +>2.下载软件后，双击运行应用程序，将M5设备通过数据线连接至电脑,选择端口参数，点击 **"Burn"** 即可开始烧录 + +!>3.EasyLoader烧录前需要安装有CP210X（USB驱动程序），[点击此处查看驱动安装教程](zh_CN/related_documents/M5Burner#安装串口驱动) + + ### 管脚映射 diff --git a/docs/zh_CN/unit/thermal.md b/docs/zh_CN/unit/thermal.md index 70b8c519..04f703c8 100644 --- a/docs/zh_CN/unit/thermal.md +++ b/docs/zh_CN/unit/thermal.md @@ -51,7 +51,7 @@ - + >1.EasyLoader是一个简洁快速的程序烧录器，每一个产品页面里的EasyLoader都提供了一个与产品相关的案例程序. [点击此处下载](https://m5stack.oss-cn-shenzhen.aliyuncs.com/EasyLoader/Unit/EasyLoader_MLX90640.exe)